A novel controllable capacitor commutation based superconducting hybrid direct current breaker.

Featuring low power loss and high reliability, voltage source converter medium voltage direct current (VSC-MVDC) systems have been widely employed for grid-tied renewable energy applications. To maintain high operational safety, circuit breakers are needed to isolate faulted powerlines by comprehensively considering response speed and installation cost. Research efforts have been put to realizing DC fault isolation by coordinating resistive type superconducting fault current limiter (R-SFCL) and integrated-gate-commutated-thyristor (IGCT) based hybrid DC circuit breaker. In this paper, a controllable current commutation based superconducting DC circuit breaker (CCCB-SDCCB) is proposed. By integrating R-SFCL with IGCT based hybrid DC circuit breakers, the current interrupting capacity can be greatly enlarged with the advantage of low cost and fast speed, and hence the overall cost for suppress large fault currents can be greatly reduced for MVDC systems. In addition, a new current injection circuit branch using H-bridge structure is designed to recycle the residual capacitor voltage from the previous fault stage to trigger the IGCTs without the capacitor pre-charging process. Simulation results show that the fault current can be successfully suppressed from 24.2 to 2.1 kA and fully interrupted within 4.11 ms by the proposed CCCB-SDCCB.

Ovarian Hyperstimulation syndrome combined with hypothyroidism: a comprehensive review.

Ovarian Hyperstimulation Syndrome (OHSS) is a systemic condition marked by the enlargement of the ovaries and heightened vascular permeability. And hypothyroidism (HT) emerges as a potential risk factor for OHSS occurrence. This review presented a comprehensive summary of pertinent case reports involving patients diagnosed with both HT and OHSS. Detailed exploration was conducted into their clinical presentations, diagnostic methodologies, and treatment modalities. Additionally, the review delved into potential interaction mechanisms between HT and OHSS, encompassing various aspects including hormone levels. Moreover, management strategies for mitigating the risk of OHSS in HT patients were thoroughly reviewed and the importance of monitoring thyroid function in those experiencing OHSS was emphasized. This review indicated that the association between HT and OHSS, underscoring its multifaceted complexity. It could accentuate the ongoing necessity for rigorous research and clinical refinement to deepen our comprehension of this association and to bolster diagnostic and therapeutic methodologies for optimal patient care. In conclusion, this review offered valuable insights for future research directions and clinical practices for patients afflicted with OHSS and HT.

Enhancement of ZT in Bi0.5Sb1.5Te3 Thin Film through Lattice Orientation Management.

Thermoelectric power can convert heat and electricity directly and reversibly. Low-dimensional thermoelectric materials, particularly thin films, have been considered a breakthrough for separating electronic and thermal transport relationships. In this study, a series of Bi0.5Sb1.5Te3 thin films with thicknesses of 0.125, 0.25, 0.5, and 1 µm have been fabricated by RF sputtering for the study of thickness effects on thermoelectric properties. We demonstrated that microstructure (texture) changes highly correlate with the growth thickness in the films, and equilibrium annealing significantly improves the thermoelectric performance, resulting in a remarkable enhancement in the thermoelectric performance. Consequently, the 0.5 µm thin films achieve an exceptional power factor of 18.1 µWcm-1K-2 at 400 K. Furthermore, we utilize a novel method that involves exfoliating a nanosized film and cutting with a focused ion beam, enabling precise in-plane thermal conductivity measurements through the 3ω method. We obtain the in-plane thermal conductivity as low as 0.3 Wm-1K-1, leading to a maximum ZT of 1.86, nearing room temperature. Our results provide significant insights into advanced thin-film thermoelectric design and fabrication, boosting high-performance systems.

Single nucleotide polymorphisms in the KRT82 promoter region modulate irregular thickening and patchiness in the dorsal skin of New Zealand rabbits.

BACKGROUND: While rabbits are used as models in skin irritation tests, the presence of irregular patches and thickening on the dorsal skin can affect precise evaluation. In this study, genes associated with patchiness or non-patchiness on the dorsal skin of New Zealand rabbits were investigated to identify potential regulators of the patchiness phenotype. RESULTS: The results showed that parameters associated with hair follicles (HFs), such as HF density, skin thickness, and HF depth, were augmented in rabbits with the patchiness phenotype relative to the non-patchiness phenotype. A total of 592 differentially expressed genes (DEGs) were identified between the two groups using RNA-sequencing. These included KRT72, KRT82, KRT85, FUT8, SOX9, and WNT5B. The functions of the DEGs were investigated by GO and KEGG enrichment analyses. A candidate gene, KRT82, was selected for further molecular function verification. There was a significant positive correlation between KRT82 expression and HF-related parameters, and KRT82 overexpression and knockdown experiments with rabbit dermal papilla cells (DPCs) showed that it regulated genes related to skin and HF growth and development. Investigation of single nucleotide polymorphisms (SNPs) in the exons and promoter region of KRT82 identified four SNPs in the promoter region but none in the exons. The G.-631G > T, T.-696T > C, G.-770G > T and A.-873 A > C alleles conformed to the Hardy - Weinberg equilibrium, and three identified haplotypes showed linkage disequilibrium. Luciferase reporter assays showed that the core promoter region of KRT82 was located in the - 600 to - 1200 segment, in which the four SNPs were located. CONCLUSIONS: The morphological characteristics of the patchiness phenotype were analyzed in New Zealand rabbits and DEGs associated with this phenotype were identified by RNA-sequencing. The biological functions of the gene KRT82 associated with this phenotype were analyzed, and four SNPs were identified in the promoter region of the gene. These findings suggest that KRT82 may be a potential biomarker for the breeding of experimental New Zealand rabbits.

Multiomics-based molecular subtyping based on the commensal microbiome predicts molecular characteristics and the therapeutic response in breast cancer.

The gut microbiota has been demonstrated to be correlated with the clinical phenotypes of diseases, including cancers. However, there are few studies on clinical subtyping based on the gut microbiota, especially in breast cancer (BC) patients. Here, using machine learning methods, we analysed the gut microbiota of BC, colorectal cancer (CRC), and gastric cancer (GC) patients to identify their shared metabolic pathways and the importance of these pathways in cancer development. Based on the gut microbiota-related metabolic pathways, human gene expression profile and patient prognosis, we established a novel BC subtyping system and identified a subtype called "challenging BC". Tumours with this subtype have more genetic mutations and a more complex immune environment than those of other subtypes. A score index was proposed for in-depth analysis and showed a significant negative correlation with patient prognosis. Notably, activation of the TPK1-FOXP3-mediated Hedgehog signalling pathway and TPK1-ITGAE-mediated mTOR signalling pathway was linked to poor prognosis in "challenging BC" patients with high scores, as validated in a patient-derived xenograft (PDX) model. Furthermore, our subtyping system and score index are effective predictors of the response to current neoadjuvant therapy regimens, with the score index significantly negatively correlated with both treatment efficacy and the number of immune cells. Therefore, our findings provide valuable insights into predicting molecular characteristics and treatment responses in "challenging BC" patients.

Magnetized bentonite modified rice straw biochar: qualitative and quantitative analysis of Cd(II) adsorption mechanism.

Industrialization has caused a significant global issue with cadmium (Cd) pollution. In this study, Biochar (Bc), generated through initial pyrolysis of rice straw, underwent thorough mixing with magnetized bentonite clay, followed by activation with KOH and subsequent pyrolysis. Consequently, a magnetized bentonite modified rice straw biochar (Fe3O4@B-Bc) was successfully synthesized for effective treatment and remediation of this problem. Fe3O4@B-Bc not only overcomes the challenges associated with the difficult separation of individual bentonite or biochar from water, but also exhibited a maximum adsorption capacity of Cd(II) up to 241.52 mg g-1. The characterization of Fe3O4@B-Bc revealed that its surface was rich in C, O and Fe functional groups, which enable efficient adsorption. The quantitative calculation of the contribution to the adsorption mechanism indicates that cation exchange and physical adsorption accounted for 65.87% of the total adsorption capacity. In conclusion, Fe3O4@B-Bc can be considered a low-cost and recyclable green adsorbent, with broad potential for treating cadmium-polluted water.

Robot-assisted total knee arthroplasty system provides more precise control of the femoral rotation angle: A retrospective study.

BACKGROUND: Rotational alignment in total knee arthroplasty (TKA) is a crucial technical point that needs attention. We conducted a retrospective study to investigate whether a new robot-assisted TKA (RA-TKA) could improve the accuracy of rotational alignment and whether rotational alignment affects postoperative pain and functional evaluation of the knee. METHODS: A total of 136 consecutive patients who underwent TKA were included in this study. Half of the patients underwent RA-TKA and the other half underwent conventional TKA (CON-TKA) by the same group of surgeons. Collect the relevant parameters. RESULTS: The postoperative femoral rotation angle (FRA) was -0.72 ± 2.59° in the robot-assisted group and 1.13 ± 2.73° in the conventional group, and were statistically significantly different (p < 0.001). CONCLUSION: This study provides preliminary evidence that the RA-TKA provides more precise control of FRA than CON-TKA, and verifies that tibial rotation angle and combined rotation angle affect postoperative knee pain and functional evaluation.

Bioinspired Robust Gas-Permeable On-Skin Electronics: Armor-Designed Nanoporous Flash Graphene Assembly Enhancing Mechanical Resilience.

Soft on-skin electrodes play an important role in wearable technologies, requiring attributes such as wearing comfort, high conductivity, and gas permeability. However, conventional fabrication methods often compromise simplicity, cost-effectiveness, or mechanical resilience. In this study, a mechanically robust and gas-permeable on-skin electrode is presented that incorporates Flash Graphene (FG) integrated with a bioinspired armor design. FG, synthesized through Flash Joule Heating process, offers a small-sized and turbostratic arrangement that is ideal for the assembly of a conductive network with nanopore structures. Screen-printing is used to embed the FG assembly into the framework of polypropylene melt-blown nonwoven fabrics (PPMF), forming a soft on-skin electrode with low sheet resistance (125.2 ± 4.7 Ω/□) and high gas permeability (≈10.08 mg cm⁻2 h⁻¹). The "armor" framework ensures enduring mechanical stability through adhesion, washability, and 10,000 cycles of mechanical contact friction tests. Demonstrating capabilities in electrocardiogram (ECG) and electromyogram (EMG) monitoring, along with serving as a self-powered triboelectric sensor, the FG/PPMF electrode holds promise for scalable, high-performance flexible sensing applications, thereby enriching the landscape of integrated wearable technologies.

The effects of dietary macronutrient composition on resting energy expenditure following active weight loss: A systematic review and meta-analysis.

A systematic review and meta-analysis was conducted to evaluate the relative effectiveness of different dietary macronutrient patterns on changes in resting energy expenditure (REE) in relation to weight loss, categorized as minimal (<5%) and moderate to high (>5%). Changes in REE were assessed using a DerSimonian and Laird random-effects meta-analysis. A diet lower in carbohydrates (CHO) or higher in fat and protein was associated with smaller reductions in REE, with these trends being more pronounced among participants who experienced moderate to high weight loss. Adjusted meta-regression analysis indicated that, within the participants who experienced moderate to high weight loss, each 1% increase in CHO intake was associated with a reduction of 2.30 kcal/day in REE (95% CI: -4.11 to -0.47, p = 0.013). In contrast, a 1% increase in protein and fat intake was correlated with an increase in REE by 3.00 (95% confidence interval [CI] [1.02, 5.07], p = 0.003) and 0.5 (95% CI [-2.43, 3.41], p = 0.740) kcal/day, respectively. No significant associations were found among participants who experienced minimal weight loss. These findings indicate that, under a caloric deficit, the impact of dietary macronutrient composition on REE may vary depending on the degree of weight loss and individual metabolic responses.

Precision Colorectal Cancer Fecal Immunological Test Screening With Fecal-Hemoglobin-Concentration-Guided Interscreening Intervals.

Importance: Given a gradient relationship between fecal hemoglobin (f-Hb) concentration and colorectal neoplasia demonstrated previously, using f-Hb-guided interscreening interval has increasingly gained attention in population-based fecal immunological test (FIT), but it is very rare to address how to implement such a precision strategy and whether it can economize the use of FIT and colonoscopy. Objective: To demonstrate the applicability of personalized colorectal cancer (CRC) screening with f-Hb-guided screening intervals to reduce the number of FITs and colonoscopy with as equivalent efficacy as universal biennial screening equivalent efficacy as universal biennial screening. Design, Setting, and Participants: A retrospective cohort study for developing f-Hb-guided precision interscreening interval was conducted using data on a Taiwanese biennial nationwide FIT screening program that enrolled more than 3 million participants aged 50 to 74 years between 2004 and 2014. The cohort was followed up over time until 2019 to ascertain colorectal neoplasia and causes of death. A comparative study was further designed to compare the use of FIT and colonoscopy between the personalized f-Hb-guided group and the universal biennial screening group given the equivalent efficacy of reducing CRC-related outcomes. Main Outcomes and Measurements: A spectrum of f-Hb-guided intervals was determined by using the Poisson regression model given the equivalent efficacy of a universal biennial screening. The use of FIT and colonoscopy for the pragmatic f-Hb-guided interval group was measured compared with the universal biennial screening group. Data analysis was performed from September 2022 to October 2023. Results: Using data from the 3 500 250 participants (mean [SD] age, 57.8 [6.0] years) enrolled in the Taiwanese biennial nationwide FIT screening program, an incremental increase in baseline f-Hb associated with colorectal neoplasia and CRC mortality consistently was observed. Participants with different f-Hb levels were classified into distinct risk categories. Various screening intervals by different f-Hb levels were recommended. Using the proposed f-Hb-guided screening intervals, it was found that the personalized method was imputed to reduce the number of FIT tests and colonoscopies by 49% and 28%, respectively, compared with the universal biennial screening. Conclusion and Relevance: The gradient relationship between f-Hb and colorectal neoplasia and CRC mortality was used to develop personalized FIT screening with f-Hb-guided screening intervals. Such a precision interscreening interval led to the reduced use of FIT test and colonoscopy without compromising the effectiveness of universal biennial screening.

Traditional, complementary and integrative medicine for fatigue post COVID-19 infection: A systematic review of randomized controlled trials.

Background: Chronic fatigue is a predominant symptom of post COVID-19 condition, or long COVID. We aimed to evaluate the efficacy and safety of Traditional, Complementary and Integrative Medicine (TCIM) for fatigue post COVID-19 infection. Methods: Ten English and Chinese language databases and grey literature were searched up to 12 April 2023 for randomized controlled trials (RCTs). Cochrane "Risk of bias" (RoB) tool was applied. Evidence certainty was assessed using Grading of Recommendations Assessment, Development, and Evaluation (GRADE). Effect estimates were presented as risk ratio (RR) or mean difference (MD) with 95% confidence interval (CI). Results: Thirteen RCTs with 1632 participants were included. One RCT showed that Bufei Huoxue herbal capsules reduced fatigue (n=129, MD -14.90, 95%CI -24.53 to -5.27), one RCT reported that Ludangshen herbal liquid lowered fatigue (n=184, MD -1.90, 95%CI -2.38 to -1.42), and the other one RCT shown that fatigue disappearance rate was higher with Ludangshen herbal liquid (n=184, RR 4.19, 95%CI 2.06 to 8.53). Compared to traditional Chinese medicine rehabilitation (TCM-rahab) alone, one RCT showed that fatigue symptoms were lower following Qingjin Yiqi granules plus TCM-rehab (n=388, MD -0.48, 95%CI -0.50 to -0.46). Due to concerns with RoB and/or imprecision, the certainty in this evidence was low to very low. No serious adverse events was reported. Conclusions: Limited evidence suggests that various TCIM interventions might reduce post COVID-19 fatigue. Larger, high quality RCTs of longer duration are required to confirm these preliminary findings. Study Registration: The protocol of this review has been registered at PROSPERO: CRD42022384136.

Structure of a human monoclonal antibody in complex with Outer surface protein C (OspC) of the Lyme disease spirochete, Borreliella burgdorferi.

Lyme disease is a tick-borne, multisystem infection caused by the spirochete, Borreliella burgdorferi . Although antibodies have been implicated in the resolution of Lyme disease, the specific B cell epitopes targeted during human infections remain largely unknown. In this study, we characterized and defined the structural epitope of a patient-derived bactericidal monoclonal IgG ("B11") against Outer surface protein C (OspC), a homodimeric lipoprotein necessary for B. burgdorferi tick-mediated transmission and early-stage colonization of vertebrate hosts. High-resolution epitope mapping was accomplished through hydrogen deuterium exchange-mass spectrometry (HDX-MS) and X-ray crystallography. Structural analysis of B11 Fab-OspC A complexes revealed the B11 Fabs associated in a 1:1 stoichiometry with the lateral faces of OspC A homodimers such that the antibodies are essentially positioned perpendicular to the spirochete's outer surface. B11's primary contacts reside within the membrane proximal regions of α-helices 1 and 6 and adjacent loops 5 and 6 in one OspC A monomer. In addition, B11 spans the OspC A dimer interface, engaging opposing α-helix 1', α-helix 2', and loop 2-3' in the second OspC A monomer. The B11-OspC A structure is reminiscent of the recently solved mouse transmission blocking monoclonal IgG B5 in complex with OspC A , indicating a mode of engagement with OspC that is conserved across species. In conclusion, we provide the first detailed insight into the interaction between a functional human antibody and an immunodominant Lyme disease antigen long considered an important vaccine target.

An Expert-Knowledge-based Graph Convolutional Network for Skeleton-based Physical Rehabilitation Exercises Assessment.

Physical therapists play a crucial role in guiding patients through effective and safe rehabilitation processes according to medical guidelines. However, due to the therapist-patient imbalance, it is neither economical nor feasible for therapists to provide guidance to every patient during recovery sessions. Automated assessment of physical rehabilitation can help with this problem, but accurately quantifying patients' training movements and providing meaningful feedback poses a challenge. In this paper, an Expert-knowledge-based Graph Convolutional approach is proposed to automate the assessment of the quality of physical rehabilitation exercises. This approach utilizes experts' knowledge to improve the spatial feature extraction ability of the Graph Convolutional module and a Gated pooling module for feature aggregation. Additionally, a Transformer module is employed to capture long-range temporal dependencies in the movements. The attention scores and weight matrix obtained through this approach can serve as interpretability tools to help therapists understand the assessment model and assist patients in improving their exercises. The effectiveness of the proposed method is verified on the KIMORE dataset, achieving state-of-the-art performance compared to existing models. Experimental results also illustrate the interpretability of the method in both spatial and temporal dimensions.

Determination of major drive of ozone formation and improvement of O3 prediction in typical North China Plain based on interpretable random forest model.

O3 pollution in China has become prominent in recent years, and it has become one of the most challenging issues in air pollution control. We used data on atmospheric pollutants and meteorology from 2019 to 2021 to build an interpretable random forest (RF) model, applying this model to predict O3 concentration in 2022 in five cities in the Southwest North China Plain. The model was also used to identify and explain the influence of various factors on O3 formation. The correlation coefficient R2 between the predicted O3 concentration and observed O3 concentration was 0.82, the MAE was 15.15 µg/m3, and the RMSE was 20.29 µg/m3, indicating that the model can effectively predict O3 concentration in the studying area. The results of correlation analysis, feature importance, and the driving factor analysis from SHapley Additive exPlanations (SHAP) model indicated that temperature (T), NO2, and relative humidity (RH) are the top three features affecting O3 prediction, while the weights of wind speed and wind direction were relatively low. Thus, O3 in the southwestern region of Henan may mainly come from the formation of local photochemical activities. The dominant factors behind O3 also varied in different seasons. In spring and autumn, O3 pollution is more likely to occur under high NO2 concentration and high-temperature conditions, while in summer, it is more likely to occur under high-temperature and precipitation-free weather. In winter, NO2 is the dominant factor in O3 formation. Finally, the interpretable RF model is used to predict future O3 concentration based on features provided by Community Multiscale Air Quality (CMAQ) and Weather Research & Forecast (WRF) model, and the simulation performance of CMAQ on O3 concentration is enhanced to a certain extent, improving the prediction of future O3 pollution situations and guiding pollution control.

Biomimetic gradient scaffolds for the tissue engineering and regeneration of rotator cuff enthesis.

Rotator cuff tear is one of the most common musculoskeletal disorders, which often results in recurrent shoulder pain and limited movement. Enthesis is a structurally complex and functionally critical interface connecting tendon and bone that plays an essential role in maintaining integrity of the shoulder joint. Despite the availability of advanced surgical procedures for rotator cuff repair, there is a high rate of failure following surgery due to suboptimal enthesis healing and regeneration. Novel strategies based on tissue engineering are gaining popularity in improving tendon-bone interface (TBI) regeneration. Through incorporating physical and biochemical cues into scaffold design which mimics the structure and composition of native enthesis is advantageous to guide specific differentiation of seeding cells and facilitate the formation of functional tissues. In this review, we summarize the current state of research in enthesis tissue engineering highlighting the development and application of biomimetic scaffolds that replicate the gradient TBI. We also discuss the latest techniques for fabricating potential translatable scaffolds such as 3D bioprinting and microfluidic device. While preclinical studies have demonstrated encouraging results of biomimetic gradient scaffolds, the translation of these findings into clinical applications necessitates a comprehensive understanding of their safety and long-term efficacy.

Hierarchically porous MOF@COF structures with ultrafast gas diffusion rate for C2H6/C2H4 separation.

For ethylene purification, C2H6-selective metal-organic frameworks (MOFs) show great potential to directly produce polymer-grade C2H4 from C2H6/C2H4 mixtures. Most C2H6-traping MOFs are ultra-microporous structures so as to strengthen multiple supramolecular interactions with C2H6. However, the narrowed pore channels of C2H6-traping MOFs cause large guest diffusion barriers, greatly hampering their practical applications. Herein, we present a feasible strategy by precisely constructing hierarchically porous MOF@COF core-shell structures to address this issue. Additional mesoporous diffusion channels were incorporated between MOF crystals through the construction of the COF shell, thereby enhancing the gas adsorption kinetics. Notably, designing a core-shell MOF@COF structure with an optimal coating amount of mesoporous COF shell will further improve the gas diffusion rate. Breakthrough experiments reveal that the tailored MOF@COF composites can effectively achieve C2H6/C2H4 separation and maintain its separation performance over five continuous measurement cycles. This investigation opens up a new avenue to solve the diffusion/transfer issues and provides more opportunities and potentials for MOF@COF composites in practical separation applications.

Lithium tantalate photonic integrated circuits for volume manufacturing.

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal-oxide-semiconductor voltage levels3 to be used in applications including data-centre communications4, high-performance computing and photonic accelerators for AI5. However, industrial use of this technology is hindered by the high cost per wafer and the limited wafer size. The high cost results from the lack of existing high-volume applications in other domains of the sort that accelerated the adoption of silicon-on-insulator (SOI) photonics, which was driven by vast investment in microelectronics. Here we report low-loss PICs made of lithium tantalate (LiTaO3), a material that has already been adopted commercially for 5G radiofrequency filters6 and therefore enables scalable manufacturing at low cost, and it has equal, and in some cases superior, properties to LiNbO3. We show that LiTaO3 can be etched to create low-loss (5.6 dB m-1) PICs using a deep ultraviolet (DUV) stepper-based manufacturing process7. We demonstrate a LiTaO3 Mach-Zehnder modulator (MZM) with a half-wave voltage-length product of 1.9 V cm and an electro-optic bandwidth of up to 40 GHz. In comparison with LiNbO3, LiTaO3 exhibits a much lower birefringence, enabling high-density circuits and broadband operation over all telecommunication bands. Moreover, the platform supports the generation of soliton microcombs. Our work paves the way for the scalable manufacture of low-cost and large-volume next-generation electro-optical PICs.

Implementing a soil ammonium N fertilizer management for synchronizing potato N demands.

Potatoes, as a high-nitrogen (N)-demand crop, are strongly influenced by both the quantity and form of N supply. Previous studies have demonstrated that applying nitrate N prior to tuber formation and ammonium N post-tuber formation can substantially enhance potato yields and improve N fertilizer use efficiency. However, the ammonium N introduced into the soil undergoes nitrification, creating challenges in aligning the N supply form with the needs of potatoes. This study explored novel N regulation strategies aimed at augmenting potato yields and improving N fertilizer use efficiency. Two field experiments were conducted from 2020 to 2022. Experiment 1 involved four N gradients, namely no N, 150 kg N ha-1, 300 kg N ha-1, and 450 kg N ha-1. Soil samples were collected regularly to determine the transformation patterns of soil ammonium N during potato growth. Experiment 2 included three N management practices: farmer practice (Con), "nitrate followed by ammonium" with nitrification inhibitor (N-NI), and optimization (the soil ammonium N transformation-based split application of N fertilizer, Opt). The potato yield and N fertilizer use efficiency were compared to assess the performance of the optimized strategy. The results showed that 90 % of the ammonium N transformed 20 days after the basal dressing of N. When N fertilizer was applied as top dressing during the tuber formation and bulking stages, more than 90 % of ammonium N was transformed after 10 days. The optimized strategy resulted in a 20 % increase in potato yield, a 20 % increase in N fertilizer partial factor productivity, and a 12-20 % reduction in residual inorganic N in the 0-60 cm soil layer. This suggests that ammonium N applied as base fertilizer exhibits a relatively slow transformation rate, while applying ammonium N as top dressing during the tuber formation and bulking stages accelerates the transformation rate. The split application of ammonium N based on soil ammonium N transformation patterns can improve the alignment between the N supply form with the specific demands of potatoes.

NIR-II Absorbed Dithienopyrrole-Benzobisthiadiazole Based Nanosystems for Autophagy Inhibition and Calcium Overload Enhanced Photothermal Therapy.

Although the current cancer photothermal therapy (PTT) can produce a powerful therapeutic effect, tumor cells have been proved a protective mechanism through autophagy. In this study, a novel hybrid theranostic nanoparticle (CaCO3@CQ@pDB NPs, CCD NPs) is designed and prepared by integrating a second near-infrared (NIR-II) absorbed conjugated polymer DTP-BBT (pDB), CaCO3, and autophagy inhibitor (chloroquine, CQ) into one nanosystem. The conjugated polymer pDB with asymmetric donor-acceptor structure shows strong NIR-II absorbing capacity, of which the optical properties and photothermal generation mechanism of pDB are systematically analyzed via molecular theoretical calculation. Under NIR-II laser irradiation, pDB-mediated PTT can produce powerful killing ability to tumor cells. At the same time, heat stimulates a large amount of Ca2+ inflow, causing calcium overload induced mitochondrial damage and enhancing the apoptosis of tumor cells. Besides, the released CQ blocks the self-protection mechanism of tumor cells and greatly enhances the attack of PTT and calcium overload therapy. Both in vitro and in vivo experiments confirm that CCD NPs possess excellent NIR-II theranostic capacity, which provides a new nanoplatform for anti-tumor therapy and builds great potential for future clinical research.

Impaired endogenous fibrinolysis status: a potential prognostic predictor in ischemic stroke.

Stroke confers a severe global healthcare burden, hence exploring risk factors for stroke occurrence and prognosis is important for stroke prevention and post-stroke management strategies. Endogenous fibrinolysis is a spontaneous physiological protective mechanism that dissolves thrombus to maintain vascular patency. Recently, impaired endogenous fibrinolysis has been considered as a potential novel cardiovascular risk factor, but its link with ischaemic stroke in the past has been underappreciated. In this review, we summarize the latest mechanisms of endogenous fibrinolysis, review the current evidence and data on endogenous fibrinolysis in ischemic stroke. It includes the structure of thrombus in ischemic stroke patients, the effect of fibrin structure on the endogenous fibrinolytic efficiency, and the association between intravenous thrombolytic therapy and endogenous fibrinolysis in ischemic stroke. It also includes the single factors (tissue plasminogen activator, urokinase plasminogen activator, plasminogen activator inhibitor-1, thrombin activatable fibrinolysis inhibitor, complement component 3, complement component 5, alpha-2-antiplasmin, plasmin-alpha-2-antiplasmin complex, and lipoprotein[a]), and the global assessments of endogenous fibrinolysis status (thromboelastography, rotational thromboelastometry, and global thrombosis test), and their potential as predictors to identify occurrence or unfavorable functional outcomes of ischemic stroke. All of these assessments present advantages and limitations, and we suggest that the global thrombosis test may be more appropriate for detecting impaired endogenous fibrinolysis status in ischemic stroke patients.