Core microbes identification and synthetic microbiota construction for the production of Xiaoqu light-aroma Baijiu.

Baijiu production has relied on natural inoculated Qu as a starter culture, causing the unstable microbiota of fermentation grains, which resulted in inconsistent product quality across batches. Therefore, revealing the core microbes and constructing a synthetic microbiota during the fermentation process was extremely important for stabilizing product quality. In this study, the succession of the microbial community was analyzed by high-throughput sequencing technology, and ten core microbes of Xiaoqu light-aroma Baijiu were obtained by mathematical statistics, including Acetobacter, Bacillus, Lactobacillus, Weissella, Pichia,Rhizopus, Wickerhamomyces, Issatchenkia, Saccharomyces, and Kazachstania. Model verification showed that the core microbiota significantly affected the composition of non-core microbiota (P < 0.01) and key flavor-producing enzymes (R > 0.8, P < 0.01), thus significantly affecting the flavor of base Baijiu. Simulated fermentation validated that the core microbiota can reproduce the fermentation process and quality of Xiaoqu light-aroma Baijiu. The succession of bacteria was mainly regulated by acidity and ethanol, while the fungi, especially non-Saccharomyces cerevisiae, were mainly regulated by the initial dominant bacteria (Acetobacter, Bacillus, and Weissella). This study will play an important role in the transformation of Xiaoqu light-aroma Baijiu fermentation from natural fermentation to controlled fermentation and the identification of core microbes in other fermented foods.

Workshop environment heterogeneity shaped the microbiome and metabolome profiles during Xiasha round of Jiangxiangxing Baijiu.

Workshop with different fermentation years plays an essential role in the yield and quality of Baijiu. In actual production, the quality of base Baijiu in newly built workshop is inferior to the older one. In this study, the microbiota of workshop environment and fermentation process from two workshops namely N (ferment 2 years) and O (ferment 20 years) and flavor compounds were studied during Xiasha round. Results showed workshop O accumulated more environmental microorganisms and fungi including P. kudriavzevii, Wickerhamomyces anomalus and Saccharomyces sp mainly came from ground. Yeasts including Pichia, Cyberlindnera, Wickerhamomyces and Candida were responsible for flavor substances formation in O while Saccharopolyspora was in N. This study for the first time explored the reasons for the brewing differences among N and O workshop from perspectives of workshop environment, microbial community and flavor substances, providing new ideas for guiding production as well as improvement of Baijiu quality.

Exploring the impact of initial moisture content on microbial community and flavor generation in Xiaoqu baijiu fermentation.

Moisture is essential in microbiota succession and flavor formation during baijiu fermentation. However, it remains unknown how moisture content affects microbiota, metabolism, and their relationship. Here, we compared the difference in volatiles, microbiota characteristics, and potential functions with different initial moisture contents (50 %, 55 %, 60 %, 65 %, 70 %). Results showed that the ratio of ethyl acetate to ethyl lactate and total volatile compounds content increased as the moisture content was elevated from 50 % to 70 %. As increasing moisture content, fermentation system microbiota dominated by Lactobacillus was formed more rapidly. Lactobacillus, Dekkera, and Pediococcus were positively correlated with moisture, promoting the production of propanol, acetic acid, butyric acid, and 2-butanol. The complexity and stability of ecological networks enhanced as moisture content increased (R2 = 0.94, P = 0.004). Our study revealed that moisture-drive microbiota was a critical contributor to flavor formation, providing the theoretical basis for moisture control to regulate flavor compounds.

Revealing Potential Genes Affecting Flocculation and/or Viability of Saccharomyces pastorianus by Comparative Genomic Analysis.

Yeast flocculation and viability are critical factors in beer production. Adequate flocculation of yeast at the end of fermentation helps to reduce off-flavors and cell separation, while high viability is beneficial for yeast reuse. In this study, we used comparative genomics to analyze the genome information on Saccharomyces pastorianus W01, and its spontaneous mutant W02 with appropriate weakened flocculation ability (better off-flavor reduction performance) and unwanted decreased viability, to investigate the effect of different gene expressions on yeast flocculation or/and viability. Our results indicate that knockout of CNE1, CIN5, SIN3, HP-3, YPR170W-B, and SCEPF1_0274000100 and overexpression of CNE1 and ALD2 significantly decreased the flocculation ability of W01, while knockout of EPL1 increased the flocculation ability of W01. Meanwhile, knockout of CIN5, YPR170W-B, OST5, SFT1, SCEPF1_0274000100, and EPL1 and overexpression of SWC3, ALD2, and HP-2 decreased the viability of W01. CIN5, EPL1, SCEPF1_0274000100, ALD2, and YPR170W-B have all been shown to affect yeast flocculation ability and viability.

Effects of Four Strains of Actinomycetes on the Content of Terpenoids in Baijiu.

Terpenoids not only are an important health factor in baijiu but also contribute to the elegance and finesse of baijiu, and actinomycetes act as an important source of terpenoids in baijiu. Four strains of actinomycetes-Streptomyces violascens (SPQ1), S. sampsonii (SPS1), S. thermophilus (SPG1), and S. griseus (SPH1)-obtained from the Daqu, pit mud, fermented grains and air, respectively, in the production of baijiu were used in solid-state and liquid fermentation with five brewing raw materials as the substrates. The terpenoids in the metabolites were analyzed and compared using gas chromatography-mass spectrometry (GC-MS). We found that the four strains of actinomycetes produced 31 terpenoids from the hydrolysates of five fermentation substrates during liquid fermentation, and the total terpenoid content was 989.94 µg/kg in the fermentation products. After 28 days of solid-state fermentation, the four actinomycete strains produced 64 terpenoids using the five fermentation substrates, and the total terpenoid content was 23,651.52 µg/kg in the fermentation products. The different fermentation substrates and fermentation methods have a great influence on the terpenoids produced by actinomycetes.

Oenological characteristics of two indigenous Starmerella bacillaris strains isolated from Chinese wine regions.

To broaden knowledge about the oenological characteristics of Starmerella bacillaris, the influence of two Chinese indigenous S. bacillaris strains on the conventional enological parameters and volatile compounds of Cabernet Sauvignon wines were investigated under different inoculation protocols (single inoculation and simultaneous/sequential inoculation with the commercial Saccharomyces cerevisiae EC1118). The results showed that the two S. bacillaris strains could complete alcohol fermentation alone under high sugar concentrations while increasing the content of glycerol and decreasing the content of acetic acid. Compared with wines fermented by EC1118 single inoculation, S. bacillaris single inoculation and S. bacillaris/EC1118 sequential inoculation increased the contents of isobutanol, ethyl isobutanoate, terpenes, and ketones and decreased the contents of isopentanol, phenylethyl alcohol, fatty acids, acetate esters, and total ethyl esters. Furthermore, for S. bacillaris/EC1118 simultaneous inoculation, the concentrations of ethyl esters were increased, contributing to a higher score of "floral" and "fruity" notes in agreement with sensory analysis. KEY POINTS: • S. bacillaris single and simultaneous/sequential inoculation. • Conventional enological parameters and volatile compounds were investigated. • S. bacillaris/EC1118 simultaneous fermentation increased ethyl esters.

Engineering Shewanella oneidensis to efficiently harvest electricity power by co-utilizing glucose and lactate in thin stillage of liquor industry.

Thin stillage, rich in glucose and lactate, can seriously pollute water resources when directly discharged into the natural environment. Microbial fuel cells (MFC), as a green and sustainable technology, could utilize exoelectrogens to break down organics in wastewater and harvest electricity. Nevertheless, Shewanella oneidensis MR-1, cannot utilize thin stillage for efficient power generation. Here, to enable S. oneidensis to co-utilize glucose and lactate from thin stillage, an engineered S. oneidensis G7∆RSL1 was first created by constructing glucose metabolism pathway, promoting glucose and lactate co-utilization, and enhancing biofilm formation. Then, to enhance biofilm conductivity, we constructed a 3D self-assembled G7∆RSL1-rGO/CNT biohybrid with maximum power density of 560.4 mW m-2 and 373.7 mW m-2 in artificial and actual thin stillage, respectively, the highest among the reported genetically engineered S. oneidensis with thin stillage as carbon source. This study provides a new strategy to facilitate practical applications of MFC in wastewater remediation and efficient power recovery.

Application Potential of Baijiu Non-Saccharomyces Yeast in Winemaking Through Sequential Fermentation With Saccharomyces cerevisiae.

To explore the potential application of non-Saccharomyces yeasts screened from Baijiu fermentation environment in winemaking, the effect of four Baijiu non-Saccharomyces yeasts (two Zygosaccharomyces bailii and two Pichia kudriavzevii) sequentially fermented with Saccharomyces cerevisiae on the physicochemical parameters and volatile compounds of wine was analyzed. The results indicated that there was no obvious antagonism between S. cerevisiae and Z. bailli or P. kudriavzevii in sequential fermentations, and all strains could be detected at the end of alcoholic fermentation. Compare with S. cerevisiae pure fermentation, Z. bailii/S. cerevisiae sequential fermentations significantly reduced higher alcohols, fatty acids, and ethyl esters and increased acetate esters; P. kudriavzevii/S. cerevisiae sequential fermentations reduced the contents of C6 alcohols, total higher alcohols, fatty acids, and ethyl esters and significantly increased the contents of acetate esters (especially ethyl acetate and 3-methylbutyl acetate). Sequential fermentation of Baijiu non-Saccharomyces yeast and S. cerevisiae improved the flavor and quality of wine due to the higher ester content and lower concentration of higher alcohols and fatty acids, non-Saccharomyces yeasts selected from Baijiu fermentation environment have potential applications in winemaking, which could provide a new strategy to improve wine flavor and quality.

Exploring temporal varying demographic and economic disparities in COVID-19 infections in four U.S. areas: based on OLS, GWR, and random forest models.

Although studies have previously investigated the spatial factors of COVID-19, most of them were conducted at a low resolution and chose to limit their study areas to high-density urbanized regions. Hence, this study aims to investigate the economic-demographic disparities in COVID-19 infections and their spatial-temporal patterns in areas with different population densities in the United States. In particular, we examined the relationships between demographic and economic factors and COVID-19 density using ordinary least squares, geographically weighted regression analyses, and random forest based on zip code-level data of four regions in the United States. Our results indicated that the demographic and economic disparities are significant. Moreover, several areas with disadvantaged groups were found to be at high risk of COVID19 infection, and their infection risk changed at different pandemic periods. The findings of this study can contribute to the planning of public health services, such as the adoption of smarter and comprehensive policies for allocating economic recovery resources and vaccines during a public health crisis.

The immunosuppressive effects of low molecular weight chitosan on thymopentin-activated mice bearing H22 solid tumors.

In the present study, the low molecular weight of chitosan (CS) was prepared and its activity on thymopentin-activated mice bearing H22 solid tumors was further researched. The purity and molecular weight of CS were determined by UV and HPGPC spectra, and its immunosuppressive effects on H22 tumor-bearing mice were evaluated through determination on immune organs, cells and cytokines. Results showed that CS contained little impurities with the average molecular weight of 1.20 × 104 Da. The in vivo antitumor experiments demonstrated that CS facilitated to destroy immune organs (thymuses and spleens), suppress immune cells (lymphocytes, macrophages and NK cells) activities and reduce immune-related cytokines (TNF-α, IFN-γ, IL-2 and IL-4) expressions of H22 tumor-bearing mice even with simultaneous TP5 stimulation. Our data suggested that CS could not be applied to improve immune response in cancer-bearing patients, but might be employed for treatments on autoimmune diseases or organ transplant patients.

Analysis of the molecular basis of Saccharomyces cerevisiae mutant with high nucleic acid content by comparative transcriptomics.

Ribonucleic acid (RNA) and its degradation products are important functional components widely used in the food industry. Transcription analysis was used to explore the genetic mechanism underlying nucleic acid synthesis in the chemical mutant Saccharomyces cerevisiae strain BY23-195 with high nucleic acid content. Results showed that ribosome biogenesis, meiosis, RNA transport, mitogen-activated protein kinase (MAPK) signaling pathway, tryptophan metabolism, carbon metabolism, and longevity regulating pathway are closely related to the high nucleic acid metabolism of S. cerevisiae. Fourteen most promising genes were selected to evaluate the effect of single-gene deletion or overexpression on the RNA synthesis of S. cerevisiae. Compared with the RNA content of the parent strain BY23, that of mutant strains BY23-HXT1, BY23-ΔGSP2 and BY23-ΔCTT1 increased by 8.19%, 11.60% and 14.00%, respectively. The possible reason why HXT1, GSP2, and CTT1 affect RNA content is by regulating cell fitness. This work was the first to report that regulating the transcription of HXT1, GSP2, and CTT1 could increase the RNA content of S. cerevisiae. This work also provides valuable knowledge on the genetic mechanism of high nucleic acid synthesis in S. cerevisiae and new strategies for increasing its RNA content.

Metabolic Engineering of Saccharomyces cerevisiae for Ethyl Acetate Biosynthesis.

Ethyl acetate can be synthesized from acetyl-CoA and ethanol via a reaction by alcohol acetyltransferases (AATase) in yeast. In order to increase the yield of acetyl-CoA, different terminators were used to optimize the expressions of acetyl-CoA synthetase (ACS1/2) and aldehyde dehydrogenase (ALD6) to increase the contents of acetyl-CoA in Saccharomyces cerevisiae. ATF1 coding AATase was coexpressed in expression cassettes of ACS1/ACS2 and ALD6 to promote the carbon flux toward ethyl acetate from acetyl-CoA. Further to improve ethyl acetate production, four heterologous AATase including HuvEAT1 (Hanseniaspora uvarum), KamEAT1 (Kluyveromyces marxianus), VAAT (wild strawberry), and AeAT9 (kiwifruit) were introduced. Subsequently mitochondrial transport and utilization of pyruvate and acetyl-CoA were impeded to increase the ethyl acetate accumulation in cytoplasm. Under the optimal fermentation conditions, the engineered strain of PGAeΔPOR2 produced 1.69 g/L ethyl acetate, which was the highest value reported to date by metabolic engineering methods.

Enhanced Production of Ethyl Lactate in Saccharomyces cerevisiae by Genetic Modification.

Ethyl lactate is an important flavor substance in baijiu, and it is also one of the common raw materials in the production of flavors and spices. In this study, we first established the ethyl lactate biosynthesis pathway in Saccharomyces cerevisiae α(L) by introducing propionyl coenzyme A transferase (Pct) and alcohol acyltransferase (AAT), and the results showed that strain α(L)-CP-Ae produced the most ethyl lactate 239.53 ± 5.45 mg/L. Subsequently, the copy number of the Pctcp gene and AeAT9 gene was increased, and the modified strain α(L)-tCP-tAe produced 346.39 ± 3.99 mg/L ethyl lactate. Finally, the porin gene (por2) and the mitochondrial pyruvate carrier gene (MPC2) were knocked to impede mitochondrial transport of pyruvate, and the final modified strain α(L)-tCP-tAeΔpor2 produced ethyl lactate 420.48 ± 6.03 mg/L.

Increased RNA production in Saccharomyces cerevisiae by simultaneously overexpressing FHL1, IFH1, and SSF2 and deleting HRP1.

Ribonucleic acid (RNA) and its degradation products are widely used in the food industry. In this study, we constructed Saccharomyces cerevisiae mutants with FHL1, IFH1, SSF1, and SSF2 overexpression and HRP1 deletion, individually to evaluate the effect on RNA production. The RNA content of recombinant strains W303-1a-FHL1, W303-1a-SSF2, and W303-1a-ΔHRP1 was increased by 14.94%, 24.4%, and 19.36%, respectively, compared with the RNA content of the parent strain. However, W303-1a-IFH1 and W303-1a-SSF1 showed no significant change in RNA production compared with the parent strain. IFH1 and FHL1 encode Ifh1p and Fhl1p, respectively, which combine to form a complex that plays a key role in the transcription of the ribosomal protein (RP) gene. Ssf2p, encoded by SSF2, plays an important role in ribosome biosynthesis and Hrp1p is a negative regulator of cell growth in S. cerevisiae. Subsequently, a high RNA production strain, W112, was constructed by simultaneously overexpressing FHL1, IFH1, and SSF2 and deleting HRP1. The RNA content of W112 was 38.8% higher than the parent strain. The growth performance, RP transcription levels, and rRNA content were also investigated in the recombinant strains. This study provides a new strategy for the construction of S. cerevisiae strains containing large amounts of RNA, and it will make a significant contribution to progress in the nucleic acid industry. KEY POINTS: • Simultaneously overexpressing FHL1, IFH1, and SSF2 and deleting HRP1 can significantly increases RNA production. • The production of RNA increased by 38.8% in Saccharomyces cerevisiae. • The cell size and growth rate of the strains with higher RNA content also increased.

Production of low-alcohol Huangjiu with improved acidity and reduced levels of higher alcohols by fermentation with scarless ALD6 overexpression yeast.

Low-alcohol Huangjiu (LAH), which contains reduced contents of ethanol and higher alcohols, is prepared by diluting original Huangjiu that has a high ethanol content, which leads to a weakened flavor (i.e., acidity). To increase acidity and reduce higher alcohols level in LAH, the gene ALD6 encoding aldehyde dehydrogenase was expressed in yeast HJ-1 under the control of the pPGK1 promoter and terminators with varying activities (tGIC1, tPGK1 and tCPS1) by scarless replacement at BAT2 locus, yielding the engineered strains HJΔB-AG, HJΔB-AP, and HJΔB-AC. The acetate concentration produced by HJΔB-AG, HJΔB-AP, and HJΔB-AC was 1.26-, 1.84-, and 2.51-fold of that of HJ-1, respectively. Furthermore, the concentration of higher alcohols produced by HJΔB-AG, HJΔB-AP, and HJΔB-AC decreased by 39.91%, 45.55%, and 52.80%, respectively. This study resulted in the creation of promising recombinant yeast strains and introduced a method that can be used for the high-quality production of LAH by acid-producing Saccharomyces cerevisiae.

Biosynthetic Pathway for Ethyl Butyrate Production in Saccharomyces cerevisiae.

Ethyl butyrate is one of the most important flavor substances in Chinese Baijiu and is also an ingredient in various daily-use chemical essences and food flavorings. In this study, to produce ethyl butyrate, we first introduced a butyryl-CoA synthesis pathway into Saccharomyces cerevisiae. Subsequently, three different alcohol acyltransferases, SAAT, VAAT, and CmAAT, were separately introduced into S. cerevisiae to catalyze the reaction of butyryl-CoA with ethanol to produce ethyl butyrate, and the results showed that strain EBS with SAAT produced the most ethyl butyrate (20.06 ± 2.23 mg/L). Furthermore, as the reaction catalyzed by Bcd to produce butyryl-CoA from crotonyl-CoA is a rate-limiting step, we replaced Bcd with Ter, and the modified strain EST produced 77.33 ± 4.79 mg/L ethyl butyrate. Finally, the copy numbers of Ter and SAAT were further increased, and the resulting modified strain EST-dST produced 99.65 ± 7.32 mg/L ethyl butyrate.

The Characterization and Modification of a Novel Bifunctional and Robust Alginate Lyase Derived from Marinimicrobium sp. H1.

Alginase lyase is an important enzyme for the preparation of alginate oligosaccharides (AOS), that possess special biological activities and is widely used in various fields, such as medicine, food, and chemical industry. In this study, a novel bifunctional alginate lyase (AlgH) belonging to the PL7 family was screened and characterized. The AlgH exhibited the highest activity at 45 °C and pH 10.0, and was an alkaline enzyme that was stable at pH 6.0-10.0. The enzyme showed no significant dependence on metal ions, and exhibited unchanged activity at high concentration of NaCl. To determine the function of non-catalytic domains in the multi-domain enzyme, the recombinant AlgH-I containing only the catalysis domain and AlgH-II containing the catalysis domain and the carbohydrate binding module (CBM) domain were constructed and characterized. The results showed that the activity and thermostability of the reconstructed enzymes were significantly improved by deletion of the F5/8 type C domain. On the other hand, the substrate specificity and the mode of action of the reconstructed enzymes showed no change. Alginate could be completely degraded by the full-length and modified enzymes, and the main end-products were alginate disaccharide, trisaccharide, and tetrasaccharide. Due to the thermo and pH-stability, salt-tolerance, and bifunctionality, the modified alginate lyase was a robust enzyme which could be applied in industrial production of AOS.

Increased Acetate Ester Production of Polyploid Industrial Brewer's Yeast Strains via Precise and Seamless "Self-cloning" Integration Strategy.

BACKGROUND: Enhancing the industrial yeast strains ethyl acetate yield through a precise and seamless genetic manipulation strategy without any extraneous DNA sequences is an essential requisite and significant demand. OBJECTIVES: For increasing the ethyl acetate yield of industrial brewer's yeast strain, all the ATF1 alleles were overexpressed through "self-cloning" integration strategy. MATERIAL AND METHODS: Escherichia coli strain DH5α was utilized for plasmid construction. ATF1 alleles were overexpressed through a precise and seamless insertion of the PGK1 promoter in industrial brewer's yeast strain S6. In addition, growth rates, ATF1 mRNA levels, AATase activity, the fermentation performance of the engineered strains, and gas chromatography (GC) analysis was conducted. RESULTS: The two engineered strains (S6-P-12 and S6-P-30) overexpressed all ATF1 alleles but unaffected normal growth. The ATF1 mRNA levels of the S6-P-12 and S6-P-30 were all 4-fold higher than that of S6. The AATase (Alcohol acetyl transferases, encoded by ATF1 gene) activity of the two engineered strains was all 3-fold higher than that of the parent strain. In the beer fermentation at 10 ℃, the concentrations of ethyl acetate produced by the engineered strains S6-P-12 and S6-P-30 was increased to 23.98 and 24.00 mg L-1, respectively, about 20.44% and 20.54% higher than that of S6. CONCLUSIONS: These results verify that the ethyl acetate yield could be enhanced by the overexpressed of ATF1 in the polyploid industrial brewer's yeast strains via "self-cloning" integration strategy. The present study provides a reference for target gene modification in the diploid or polyploid industrial yeast strains.

Identification by comparative transcriptomics of core regulatory genes for higher alcohol production in a top-fermenting yeast at different temperatures in beer fermentation.

Undesirable flavor caused by excessive higher alcohols restrains the development of the wheat beer industry. To clarify the regulation mechanism of the metabolism of higher alcohols in wheat beer brewing by the top-fermenting yeast Saccharomyces cerevisiae S17, the effect of temperature on the fermentation performance and transcriptional levels of relevant genes was investigated. The strain S17 produced 297.85 mg/L of higher alcohols at 20 °C, and the production did not increase at 25 °C, reaching about 297.43 mg/L. Metabolite analysis and transcriptome sequencing showed that the metabolic pathways of branched-chain amino acids, pyruvate, phenylalanine, and proline were the decisive factors that affected the formation of higher alcohols. Fourteen most promising genes were selected to evaluate the effects of single-gene deletions on the synthesis of higher alcohols. The total production of higher alcohols by the mutants Δtir1 and Δgap1 was reduced by 23.5 and 19.66% compared with the parent strain S17, respectively. The results confirmed that TIR1 and GAP1 are crucial regulatory genes in the metabolism of higher alcohols in the top-fermenting yeast. This study provides valuable knowledge on the metabolic pathways of higher alcohols and new strategies for reducing the amounts of higher alcohols in wheat beer.

Regulating the Golgi apparatus sorting of proteinase A to decrease its excretion in Saccharomyces cerevisiae.

Beer foam stability, a key factor in evaluating overall beer quality, is influenced by proteinase A (PrA). Actin-severing protein cofilin and Golgi apparatus-localized Ca2+ ATPase Pmr1 are involved in protein sorting at the trans-Golgi network (TGN) in yeast Curwin et al. (Mol Biol Cell 23:2327-2338, 2012). To reduce PrA excretion into the beer fermentation broth, we regulated the Golgi apparatus sorting of PrA, thereby facilitating the delivery of more PrA to the vacuoles in the yeast cells. In the present study, the cofilin-coding gene COF1 and the Pmr1-coding gene PMR1 were overexpressed in the parental strain W303-1A and designated as W + COF1 and W + PMR1, respectively. The relative expression levels of COF1 in W + COF1 and PMR1 in W + PMR1 were 5.26- and 19.76-fold higher than those in the parental strain. After increases in the expression levels of cofilin and Pmr1 were confirmed, the PrA activities in the wort broth fermented with W + COF1, W + PMR1, and W303-1A were measured. Results showed that the extracellular PrA activities of W + COF1 and W + PMR1 were decreased by 9.24% and 13.83%, respectively, at the end of the main fermentation compared with that of W303-1A. Meanwhile, no apparent differences were found on the fermentation performance of recombinant and parental strains. The research uncovers an effective strategy for decreasing PrA excretion in Saccharomyces cerevisiae.