Streptococcus taonis sp. nov., a novel bacterial species isolated from a blood culture of a patient.

One Gram stain-positive, catalase-negative, α-hemolytic, chain-forming or paired cocci, designated ST22-14T, was isolated from a blood culture of a child with suspected infection. The results of 16S rRNA gene sequences analyses showed that the most closely related species to strain ST22-14T were "Streptococcus vulneris" DM3B3T (99.2%), Streptococcus mitis NCTC 12261T (99.0%), "Streptococcus gwangjuense" ChDC B345T, (99.0%), Streptococcus oralis subsp. dentisani 7747T (99.0%), Streptococcus downii CECT 9732T (99.0%), and Streptococcus infantis ATCC 700779T (98.9%). The genome of strain ST22-14T consists of 2,053,261 bp with a G + C content of 39.4%. Average nucleotide identity values between strain ST22-14T and Streptococcus mitis NCTC 12261T or other five species were from 82.2 to 88.0%. In silico DNA-DNA hybridization of ST22-14T showed an estimated DNA reassociation value of 34.6% with the closest species. The main cellular fatty acids of strain ST22-14T were 16:0, 18:0, 14:0, 18:1ω7c and 18:1ω6c. Based on these results, strain ST22-14T should be classified as a novel species of genus Streptococcus, for which the name Streptococcus taonis sp. nov. is proposed (type strain ST22-14T = NBRC 116002T = BCRC 81402T).

Unveiling the Role of Ge in CZTSSe Solar Cells by Advanced Micro-To-Atom Scale Characterizations.

Kesterite is an earth-abundant energy material with high predicted power conversion efficiency, making it a sustainable and promising option for photovoltaics. However, a large open circuit voltage Voc deficit due to non-radiative recombination at intrinsic defects remains a major hurdle, limiting device performance. Incorporating Ge into the kesterite structure emerges as an effective approach for enhancing performance by manipulating defects and morphology. Herein, how different amounts of Ge affect the kesterite growth pathways through the combination of advanced microscopy characterization techniques are systematically investigated. The results demonstrate the significance of incorporating Ge during the selenization process of the CZTSSe thin film. At high temperature, the Ge incorporation effectively delays the selenization process due to the formation of a ZnSe layer on top of the metal alloys through decomposition of the Cu-Zn alloy and formation of Cu-Sn alloy, subsequently forming of Cu-Sn-Se phase. Such an effect is compounded by more Ge incorporation that further postpones kesterite formation. Furthermore, introducing Ge mitigates detrimental "horizontal" grain boundaries by increasing the grain size on upper layer. The Ge incorporation strategy discussed in this study holds great promise for improving device performance and grain quality in CZTSSe and other polycrystalline chalcogenide solar cells.

Manufacturing of high strength and high conductivity copper with laser powder bed fusion.

Additive manufacturing (AM), known as 3D printing, enables rapid fabrication of geometrically complex copper (Cu) components for electrical conduction and heat management applications. However, pure Cu or Cu alloys produced by 3D printing often suffer from either low strength or low conductivity at room and elevated temperatures. Here, we demonstrate a design strategy for 3D printing of high strength, high conductivity Cu by uniformly dispersing a minor portion of lanthanum hexaboride (LaB6) nanoparticles in pure Cu through laser powder bed fusion (L-PBF). We show that trace additions of LaB6 to pure Cu results in an improved L-PBF processability, an enhanced strength, an improved thermal stability, all whilst maintaining a high conductivity. The presented strategy could expand the applicability of 3D printed Cu components to more demanding conditions where high strength, high conductivity and thermal stability are required.

Engineering metal-carbide hydrogen traps in steels.

Hydrogen embrittlement reduces the durability of the structural steels required for the hydrogen economy. Understanding how hydrogen interacts with the materials plays a crucial role in managing the embrittlement problems. Theoretical models have indicated that carbon vacancies in metal carbide precipitates are effective hydrogen traps in steels. Increasing the number of carbon vacancies in individual metal carbides is important since the overall hydrogen trapping capacity can be leveraged by introducing abundant metal carbides in steels. To verify this concept, we compare a reference steel containing titanium carbides (TiCs), which lack carbon vacancies, with an experimental steel added with molybdenum (Mo), which form Ti-Mo carbides comprising more carbon vacancies than TiCs. We employ theoretical and experimental techniques to examine the hydrogen trapping behavior of the carbides, demonstrating adding Mo alters the hydrogen trapping mechanism, enabling hydrogen to access carbon vacancy traps within the carbides, leading to an increase in trapping capacity.

Exciplex-forming cohost systems with 2,7-dicyanofluorene acceptors for high efficiency red and deep-red OLEDs.

Two 2,7-dicyaonfluorene-based molecules 27-DCN and 27-tDCN are utilized as acceptors (A) to combine with hexaphenylbenzene-centered donors (D) TATT and DDT-HPB for probing the exciplex formation. The photophysical characteristics reveal that the steric hindered 27-tDCN not only can increase the distance of D and A, resulting in a hypsochromic emission, but also dilute the concentration of triplet excitons to suppress non-radiative process. The 27-tDCN-based exciplex-forming blends exhibit better photoluminescence quantum yield (PLQY) as compared to those of 27-DCN-based pairs. In consequence, among these D:A blends, the device employing DDT-HPB:27-tDCN blend as the emissiom layer (EML) exhibits the best EQE of 3.0% with electroluminescence (EL) λmax of 542 nm. To further utilize the exciton electrically generated in exciplex-forming system, two D-A-D-configurated fluorescence emitter DTPNT and DTPNBT are doped into the DDT-HPB:27-tDCN blend. The nice spectral overlap ensures fast and efficient Förster energy transfer (FRET) process between the exciplex-forming host and the fluorescent quests. The red device adopting DDT-HPB:27-tDCN:10 wt% DTPNT as the EML gives EL λmax of 660 nm and maximum external quantum efficiency (EQEmax) of 5.8%, while EL λmax of 685 nm and EQE of 5.0% for the EML of DDT-HPB:27-tDCN:10 wt% DTPNBT. This work manifests a potential strategy to achieve high efficiency red and deep red OLED devices by incorporating the highly fluorescent emitters to extract the excitons generated by the exciplex-forming blend with bulky acceptor for suppressing non-radiative process.

Association of health information technology-driven multidisciplinary approaches with low-density lipoprotein cholesterol target achievement in patients with an acute coronary syndrome.

Objective: Controlling of low-density lipoprotein cholesterol (LDL-C) in patients with acute coronary syndrome (ACS) remains a challenge. Health information technology (HIT) is increasingly being applied to close quality gaps in chronic illness care. The aim of this study was to perform a qualitative review of the association of implementing HIT on lipid management processes of care and LDL-C goal attainment in patients with ACS. Method: Eligible patients with a discharge diagnosis of ACS from January 2018 to December 2021 at a tertiary medical center were retrospectively reviewed. An HIT system with a multidisciplinary approach including initiating high-intensity statin therapy, periodic laboratory follow-up, titration of lipid-lowering agents, patient education, patient-level and system-level interventions involving database monitoring and outreach by centralized care teams was introduced in October 2018. Electronical medical records including data on medications and laboratory findings at discharge and within 1 year were compared before and after implementing the HIT system. Results: A total of 2001 ACS patients (average age 63 ± 12.7 years, 79.66 % men) were analyzed. The LDL-C < 70 mg/dL goal attainment rates (36.52 %, 53.57 %, 59.22 %, 62.18 % in 2018-2021) and medium serum LDL-C levels (80.5 mg/dL, 68 mg/dL, 65 mg/dL, 64 mg/dL in 2018-2021) significantly improved within 6 months (2018 as the reference, all p<0.001). The LDL-C attainment rate at 12 months also steadily increased (53.80 %, 61.82 %, 64.21 % in 2019-2021, p = 0.019). Most of the patients switched to a high-intensity statins regimen at discharge (0.57 %, 63.67 %, 72.41 %, 84.44 %, in 2018-2021, p<0.001 with 2018 as the reference), with low adverse event rates. The maintenance rates of high-intensity statin regimens at 12 months continued to improve (41.36 %, 49.04 %, 61.39 % in 2019-2021, p<0.001). Conclusions: Efforts to control LDL-C should be increased in ACS patients by initiating and intensifying statin treatment earlier. Our results confirmed that a team-based strategy with HIT improved LDL-C target achievement for most patients with ACS.

Ligand effect of cyclometallated iridium(iii) complexes on N-alkylation of amines in hydrogen borrowing reactions.

Dinuclear iridium complexes with the general formula (C^N)2Ir(µ-Cl)2Ir(C^N)2 (C^N = bidentate ligand with carbon and nitrogen donor atoms) were prepared and used in catalytic systems for N-alkylation of amines through the hydrogen borrowing pathway. Triphenylphosphine derivatives were used as auxiliary in catalytic systems to provide excellent conversion of amines to N-alkylation products in yields ranging from 57% to 100%. The catalytic ability of the catalyst depends on the structure of its coordination ligands, including bidentate ligands (C^N) and triphenylphosphine derivatives. These catalytic systems adopt an environmentally friendly and sustainable reaction process through a hydrogen self-transfer strategy, using readily available alcohols as alkylating agents without the need for bases, solvents, and other additives, showing potential in the synthetic and pharmaceutical industries.

Retrospective study: risk assessment model for osteoporosis-a detailed exploration involving 4,552 Shanghai dwellers.

Background: Osteoporosis, a prevalent orthopedic issue, significantly influences patients' quality of life and results in considerable financial burden. The objective of this study was to develop and validate a clinical prediction model for osteoporosis risk, utilizing computer algorithms and demographic data. Method: In this research, a total of 4,552 residents from Shanghai were retrospectively included. LASSO regression analysis was executed on the sample's basic characteristics, and logistic regression was employed for analyzing clinical characteristics and building a predictive model. The model's diagnostic capacity for predicting osteoporosis risk was assessed using R software and computer algorithms. Results: The predictive nomogram model for bone loss risk, derived from the LASSO analysis, comprised factors including BMI, TC, TG, HDL, Gender, Age, Education, Income, Sleep, Alcohol Consumption, and Diabetes. The nomogram prediction model demonstrated impressive discriminative capability, with a C-index of 0.908 (training set), 0.908 (validation set), and 0.910 (entire cohort). The area under the ROC curve (AUC) of the model was 0.909 (training set), 0.903 (validation set), and applicable to the entire cohort. The decision curve analysis further corroborated that the model could efficiently predict the risk of bone loss in patients. Conclusion: The nomogram, based on essential demographic and health factors (Body Mass Index, Total Cholesterol, Triglycerides, High-Density Lipoprotein, Gender, Age, Education, Income, Sleep, Alcohol Consumption, and Diabetes), offered accurate predictions for the risk of bone loss within the studied population.

In Situ Redox Synthesis of Highly Stable Au/Electroactive Polyimide Composite and Its Application on 4-Nitrophenol Reduction.

In this study, we developed a series of Au/electroactive polyimide (Au/EPI-5) composite for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) using NaBH4 as a reducing agent at room temperature. The electroactive polyimide (EPI-5) synthesis was performed by chemical imidization of its 4,4'-(4.4'-isopropylidene-diphenoxy) bis (phthalic anhydride) (BSAA) and amino-capped aniline pentamer (ACAP). In addition, prepare different concentrations of Au ions through the in-situ redox reaction of EPI-5 to obtain Au nanoparticles (AuNPs) and anchored on the surface of EPI-5 to form series of Au/EPI-5 composite. Using SEM and HR-TEM confirm the particle size (23-113 nm) of the reduced AuNPs increases with the increase of the concentration. Based on CV studies, the redox capability of as-prepared electroactive materials was found to show an increase trend: 1Au/EPI-5 < 3Au/EPI-5 < 5Au/EPI-5. The series of Au/EPI-5 composites showed good stability and catalytic activity for the reaction of 4-NP to 4-AP. Especially, the 5Au/EPI-5 composite shows the highest catalytic activity when applied for the reduction of 4-NP to 4-AP within 17 min. The rate constant and kinetic activity energy were calculated to be 1.1 × 10-3 s-1 and 38.9 kJ/mol, respectively. Following a reusability test repeated 10 times, the 5Au/EPI-5 composite maintained a conversion rate higher than 95%. Finally, this study elaborates the mechanism of the catalytic reduction of 4-NP to 4-AP.

Bone marrow mesenchymal stem cell-derived exosomal microRNAs target PI3K/Akt signaling pathway to promote the activation of fibroblasts.

BACKGROUND: Fibroblast plays a major role in tendon-bone healing. Exosomes derived from bone marrow mesenchymal stem cells (BMSCs) can activate fibroblasts and promote tendon-bone healing via the contained microRNAs (miRNAs). However, the underlying mechanism is not comprehensively understood. Herein, this study aimed to identify overlapped BMSC-derived exosomal miRNAs in three GSE datasets, and to verify their effects as well as mechanisms on fibroblasts. AIM: To identify overlapped BMSC-derived exosomal miRNAs in three GSE datasets and verify their effects as well as mechanisms on fibroblasts. METHODS: BMSC-derived exosomal miRNAs data (GSE71241, GSE153752, and GSE85341) were downloaded from the Gene Expression Omnibus (GEO) database. The candidate miRNAs were obtained by the intersection of three data sets. TargetScan was used to predict potential target genes for the candidate miRNAs. Functional and pathway analyses were conducted using the Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) databases, respectively, by processing data with the Metascape. Highly interconnected genes in the protein-protein interaction (PPI) network were analyzed using Cytoscape software. Bromodeoxyuridine, wound healing assay, collagen contraction assay and the expression of COL I and α-smooth muscle actin positive were applied to investigate the cell proliferation, migration and collagen synthesis. Quantitative real-time reverse transcription polymerase chain reaction was applied to determine the cell fibroblastic, tenogenic, and chondrogenic potential. RESULTS: Bioinformatics analyses found two BMSC-derived exosomal miRNAs, has-miR-144-3p and has-miR-23b-3p, were overlapped in three GSE datasets. PPI network analysis and functional enrichment analyses in the GO and KEGG databases indicated that both miRNAs regulated the PI3K/Akt signaling pathway by targeting phosphatase and tensin homolog (PTEN). In vitro experiments confirmed that miR-144-3p and miR-23b-3p stimulated proliferation, migration and collagen synthesis of NIH3T3 fibroblasts. Interfering with PTEN affected the phosphorylation of Akt and thus activated fibroblasts. Inhibition of PTEN also promoted the fibroblastic, tenogenic, and chondrogenic potential of NIH3T3 fibroblasts. CONCLUSION: BMSC-derived exosomes promote fibroblast activation possibly through the PTEN and PI3K/Akt signaling pathways, which may serve as potential targets to further promote tendon-bone healing.

Discovering an unknown territory using atom probe tomography: Elemental exchange at the bioceramic scaffold/bone tissue interface.

Here we report the first atom probe study to reveal the atomic-scale composition of in vivo bone formed in a bioceramic scaffold (strontium-hardystonite-gahnite) after 12-month implantation in a large bone defect in sheep tibia. The composition of the newly formed bone tissue differs to that of mature cortical bone tissue, and elements from the degrading bioceramic implant, particularly aluminium (Al), are present in both the newly formed bone and in the original mature cortical bone tissue at the perimeter of the bioceramic implant. Atom probe tomography confirmed that the trace elements are released from the bioceramic and are actively transported into the newly formed bone. NanoSIMS mapping, as a complementary technique, confirmed the distribution of the released ions from the bioceramic into the newly formed bone tissue within the scaffold. This study demonstrated the combined benefits of atom probe and nanoSIMS in assessing nanoscopic chemical composition changes at precise locations within the tissue/biomaterial interface. Such information can assist in understanding the interaction of scaffolds with surrounding tissue, hence permitting further iterative improvements to the design and performance of biomedical implants, and ultimately reducing the risk of complications or failure while increasing the rate of tissue formation. STATEMENT OF SIGNIFICANCE: The repair of critical-sized load-bearing bone defects is a challenge, and precisely engineered bioceramic scaffold implants is an emerging potential treatment strategy. However, we still do not understand the effect of the bioceramic scaffold implants on the composition of newly formed bone in vivo and surrounding existing mature bone. This article reports an innovative route to solve this problem, the combined power of atom probe tomography and nanoSIMS is used to spatially define elemental distributions across bioceramic implant sites. We determine the nanoscopic chemical composition changes at the Sr-HT Gahnite bioceramic/bone tissue interface, and importantly, provide the first report of in vivo bone tissue chemical composition formed in a bioceramic scaffold.

Anti-reflection Layer-Sputtered Transparent Polyimide Substrate with Reliable Adhesion Strength to the Copper Layer.

Parameters of DC-reactive magnetron sputtering are optimized to deposit anti-reflection (AR) layers on transparent polyimide (PI) substrates, followed by the deposition of the conductive copper layer, to fabricate practically reliable composite films as advanced flexible circuits. When the deposition thickness is controlled and the gas composition during sputtering is adjusted, the resultant AR layer-coated PI film exhibits low reflectance and reveals improved adhesion strength to the copper layer. The adhesion reliability tests confirm that the peel strength between the PI film and the deposited layers could be further improved after thermal processing due to the formation of a worm-like morphology for better mechanical interlocking with layers. The facile sputtering process successfully fabricates a reliable substrate material with low reflectance and sufficient adhesion strength to copper for application as flexible printed circuits.

Highly Luminescent Earth-Benign Organometallic Manganese Halide Crystals with Ultrahigh Thermal Stability of Emission from 4 to 623 K.

The phosphor-converted light-emitting diode (PC-LED) has become an indispensable solid-state lighting and display technologies in the modern society. Nevertheless, the use of scarce rare-earth elements and the thermal quenching (TQ) behavior are still two most crucial issues yet to be solved. Here, this work successfully demonstrates a highly efficient and thermally stable green emissive MnI2 (XanPO) crystals showing a notable photoluminescence quantum yield (PLQY) of 94% and a super TQ resistance from 4 to 623 K. This unprecedented superior thermal stability is attributed to the low electron-phonon coupling and the unique rigid crystal structure of MnI2 (XanPO) over the whole temperature range based on the temperature-dependent photoluminescence (PL) and single crystal X-ray diffraction (SCXRD) analyses. Considering these appealing properties, green PC-LEDs with a power efficacy of 102.5 lm W-1 , an external quantum efficiency (EQE) of 22.7% and a peak luminance up to 7750 000 cd m-2 are fabricated by integrating MnI2 (XanPO) with commercial blue LEDs. Moreover, the applicability of MnI2 (XanPO) in both micro-LEDs and organic light-emitting diodes (OLEDs) is also demonstrated. In a nutshell, this study uncovers a candidate of highly luminescent and TQ resistant manganese halide suitable for a variety of emission applications.

Metabolomic profiling of exhaled breath condensate for the diagnosis of pulmonary aspergillosis.

Objective: This study aims to ascertain the unique metabolic profile of exhaled breath condensate (EBC) samples in pulmonary aspergillosis (PA) patients, and explore their usefulness for the diagnosis of PA. Methods: A total of 133 patients were included in the study, including 66 PA patients (invasive pulmonary aspergillosis, n=3; chronic pulmonary aspergillosis, n=60; allergic bronchopulmonary aspergillosis, n=3) and controls (n=67). Ultra high-performance liquid chromatography coupled with high-resolution mass spectrometry(UHPLC-HRMS) was used to analyze EBC samples. Metabolic profiling of EBC samples that were collected from 22 CPA patients at various times during treatment (before treatment, <1 month, 1-2 months, 2-3 months, 3-6 months, and ≥6 months after treatment initiation) were performed using UHPLC-HRMS. Potential biomarkers were evaluated using cluster analysis, Venn diagram and receiver operating characteristic analysis (ROC). Results: A total of 47 metabolites of potential interest were detected in the EBC samples. Further investigation showed that Asperpyrone C, Kotanin, Terphenyllin, Terrelumamide B, and Cyclotryprostatin D could be used as a diagnostic biomarker for PA. The classification between metabolic profiling of EBC samples from PA patients and controls was good with a sensitivity of 100%, specificity 89.6% for patients with PA, respectively. Venn diagram analysis of these biomarker candidates displayed three main types of compounds, which could be used for the further discrimination of aspergilloma and chronic cavitary PA. In addition, antifungal treatment had a limited influence on the value of the EBC results. Conclusions: This metabolomic approach using UHPLC-HRMS could be used as a noninvasive method for the diagnosis of PA.

Identification and Verification of Potential Biomarkers in Gastric Cancer By Integrated Bioinformatic Analysis.

Background: Gastric cancer (GC) is a common cancer with high mortality. This study aimed to identify its differentially expressed genes (DEGs) using bioinformatics methods. Methods: DEGs were screened from four GEO (Gene Expression Omnibus) gene expression profiles. Gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses were performed. A protein-protein interaction (PPI) network was constructed. Expression and prognosis were assessed. Meta-analysis was conducted to further validate prognosis. The receiver operating characteristic curve (ROC) was analyzed to identify diagnostic markers, and a nomogram was developed. Exploration of drugs and immune cell infiltration analysis were conducted. Results: Nine up-regulated and three down-regulated hub genes were identified, with close relations to gastric functions, extracellular activities, and structures. Overexpressed Collagen Type VIII Alpha 1 Chain (COL8A1), Collagen Type X Alpha 1 Chain (COL10A1), Collagen Triple Helix Repeat Containing 1 (CTHRC1), and Fibroblast Activation Protein (FAP) correlated with poor prognosis. The area under the curve (AUC) of ADAM Metallopeptidase With Thrombospondin Type 1 Motif 2 (ADAMTS2), COL10A1, Collagen Type XI Alpha 1 Chain (COL11A1), and CTHRC1 was >0.9. A nomogram model based on CTHRC1 was developed. Infiltration of macrophages, neutrophils, and dendritic cells positively correlated with COL8A1, COL10A1, CTHRC1, and FAP. Meta-analysis confirmed poor prognosis of overexpressed CTHRC1. Conclusion: ADAMTS2, COL10A1, COL11A1, and CTHRC1 have diagnostic values in GC. COL8A1, COL10A1, CTHRC1, and FAP correlated with worse prognosis, showing prognostic and therapeutic values. The immune cell infiltration needs further investigations.

Streptococcus vulneris sp. nov., isolated from wound of patient with diabetic foot ulcer (DFU).

A new α-haemolytic streptococcal strain, designated DM3B3T, was isolated from the wound of a diabetic foot ulcer (DFU) patient. Phylogenetic analysis based on 16S rRNA full-gene sequencing (1563 bp) revealed highest sequence similarity to Streptococcus mitis (99.7%), followed by "Streptococcus gwangjuense" (99.6%), and Streptococcus pseudopneumoniae (99.5%). Comparison of five housekeeping genes, groEL, rpoB, sodA, recA and pheS, revealed that strain DM3B3T was well separated from the Streptococcus reference strains. The complete genome of strain DM3B3T consisted of 1,963,039 bp with a G + C content of 41.0 mol%. Average nucleotide identity values between strain DM3B3T and Streptococcus mitis NCTC 12261T, "Streptococcus gwangjuense" ChDC B345T, and Streptococcus pseudopneumoniae ATCC BAA-960T were 93.8%, 94.4%, and 92.2%, respectively. The highest digital DNA-DNA hybridization value with respect to the closest species was 57.5%, i.e., below the species cut-off of 70% hybridization. The main cellular fatty acids of strain DM3B3T were 16:0, 18:1ω7c, 18:1ω9c and 18:0. On the basis of phylogenetic, genotypic and phenotypic data, we propose to classify this isolate as representative of a novel species of the genus Streptococcus, Streptococcus vulneris sp. nov., in reference to its isolation from wound, with strain DM3B3T (= NBRC 114638T = BCRC 81288T) as the type strain.

Probing the outfall-related anomalous Hg levels in the Danshuei Estuarine Coastal, Taiwan.

Seasonal and spatial distributions of total mercury (THg) in the Danshuei Estuary and adjacent coastal areas near the ocean outfall of Taipei, Taiwan, have been successfully investigated from May 2003 to January 2005. We found spatio-temporal variation in THg levels in the Danshuei coastal area was the result of sources and supplies of Hg. High THg concentrations in sediments and seawater were particularly found near the effluent outfall. Average THg levels (avg.: 9-22 ng L-1) were much higher than those in surrounding coastal seawaters (avg.:1-2 ng L-1). Organic carbon contents then played vital roles in controlling water and sedimentary Hg concentrations and occurrences. Hg enrichment factor (EF) as an index of contamination status in surface sediments of the Danshuei coastal area averaged 2.0 ± 0.8 (EFs > 1), indicating an extra non-crustal source from anthropogenic loadings. It implies the Dansheui coastal environment nearby the sewer outfall is facing Hg pollution.

Iridium/graphene nanostructured catalyst for the N-alkylation of amines to synthesize nitrogen-containing derivatives and heterocyclic compounds in a green process.

A facile iridium/graphene-catalyzed methodology providing an efficient synthetic route for C-N bond formation is reported. This catalyst can directly promote the formation of C-N bonds, without pre-activation steps, and without solvents, alkalis and other additives. This protocol provides a direct N-alkylation of amines using a variety of primary and secondary alcohols with good selectivity and excellent yields. Charmingly, the use of diols resulted in intermolecular cyclization of amines, and such products are privileged structures in biologically active compounds. Two examples illustrate the advantages of this catalyst in organic synthesis: the tandem catalysis to synthesize hydroxyzine, and the intermolecular cyclization to synthesize cyclizine. Water is the only by-product, which makes this catalytic process sustainable and environmentally friendly.