A sensitive colorimetric probe for detection of the phosphate ion.

In the present article, we report a novel colorimetric probe (TNT@MB) for the detection of the phosphate ion, which is based on the strong binding affinity between the phosphate ion and titanium dioxide nanotubes (TNTs). TNTs were synthesized from TiO2 nanoparticles by hydrothermal treatment. The obtained TNTs had an average length of 200 ± 50 nm and an average width of 12 ± 5 nm. TNT@MB was prepared by adsorbing methyl blue onto TNTs in acidic condition. The optimal synthesis conditions for TNT@MB consisted in having 0.05 g of TNTs react with 1 µmole of methyl blue at pH 2 for 90 min. TNTs and TNT@MB were characterized by UV-vis diffuse reflection spectroscopy, TEM, FTIR, and XPS. The phosphate-ion sensing behavior of TNT@MB was investigated by UV-visible spectroscopy. The phosphate-ion concentration linear range and detection limit of this method based on TNT@MB were 1-40 µM and 0.59 µM, respectively. A sample of lake water was used as a real sample, and analyte recovery rates were measured in the 102.5-103.6% range, with relative standard deviations below 5.6% (n = 3). We also found that this probe could be reused after regeneration in alkaline solution. These results indicate that as a colorimetric probe, TNT@MB has the advantages of being environmentally friendly, inexpensive, and simple to use, as well as giving rise to an easily observable color change.

Formation of Mo5Si3/Mo3Si-MgAl2O4 Composites via Self-Propagating High-Temperature Synthesis.

In situ formation of intermetallic/ceramic composites composed of molybdenum silicides (Mo5Si3 and Mo3Si) and magnesium aluminate spinel (MgAl2O4) was conducted by combustion synthesis with reducing stages in the mode of self-propagating high-temperature synthesis (SHS). The SHS process combined intermetallic combustion between Mo and Si with metallothermic reduction of MoO3 by Al in the presence of MgO. Experimental evidence showed that combustion velocity and temperature decreased with increasing molar content of Mo5Si3 and Mo3Si, and therefore, the flammability limit determined for the reaction at Mo5Si3 or Mo3Si/MgAl2O4 = 2.0. Based upon combustion wave kinetics, the activation energies, Ea = 68.8 and 63.8 kJ/mol, were deduced for the solid-state SHS reactions producing Mo5Si3- and Mo3Si-MgAl2O4 composites, respectively. Phase conversion was almost complete after combustion, with the exception of trivial unreacted Mo existing in both composites and a minor amount of Mo3Si in the Mo5Si3-MgAl2O4 composite. Both composites display a dense morphology formed by connecting MgAl2O4 crystals, within which micro-sized molybdenum silicide grains were embedded. For equimolar Mo5Si3- and Mo3Si-MgAl2O4 composites, the hardness and fracture toughness are 14.6 GPa and 6.28 MPa m1/2, and 13.9 GPa and 5.98 MPa m1/2, respectively.

Highly oriented Langmuir-Blodgett film of silver cuboctahedra as an effective matrix-free sample plate for surface-assisted laser desorption/ionization mass spectrometry.

The design of a homogeneous sample plate to solve the sweet heating spot issues is the key step to expand the applicability of surface-assisted laser desorption/ionization mass spectrometry (SALDI MS). Herein, large-scale and highly oriented Langmuir-Blodgett (LB) films of uniform silver nanocrystals have been fabricated as a highly efficient and matrix-free sample plate for SALDI MS. Three individual silver nanocrystals (cubes, cuboctahedra and octahedra) assembled LB films have been applied as the sample plates for glucose detection by SALDI MS without an additional matrix. The results show that the signal intensity, background noise, signal-to-noise ratio and reproducibility have been significantly improved using LB films as the sample plate in comparison with commercial matrixes of CHCA and DHB. In particular, a relative signal of 5.7% was obtained for LB films of silver cuboctahedra. The significant improvement in the SALDI MS measurement could be attributed to the homogenous dissipation of laser irradiation energy to create a large area of the sweet heating spot on well-oriented silver cuboctahedra-based LB film. This ready-to-use sample plate has the potential for widespread commercial applications in SALDI MS.