Laser Printer Printed Ion Sources for Ambient Ionization Mass Spectrometric Analysis of Volatiles and Semivolatiles.

In this study, we demonstrated a facile method to fabricate ion sources using a laser printer for ambient ionization mass spectrometry (MS). Toner spots printed by a printer can readily facilitate ionizing volatile and semivolatile compounds derived from solid or liquid samples for MS analysis. The experimental arrangement involved positioning the toner-printed paper near the inlet of a mass spectrometer, which was subjected to a high electric potential (e.g., -6 kV). Volatile or semivolatile compounds deriving from the sample positioned below the metal inlet of the mass spectrometer were promptly ionized upon activating the mass spectrometer. No direct electrical connection or voltage application was required on the paper substrate. An electric field was established between the toner spot on the paper and the inlet applied with a high voltage to induce the dielectric breakdown of the surrounding air and water molecules. Consequently, ionic species, including electrons and cationic radicals, were generated. Subsequent ion-molecule reactions facilitated the production of protons for ionizing analytes present in the gas phase proximal to the inlet of the mass spectrometer. Deprotonated analytes were detected in the resultant mass spectra when employing the method in negative ion mode. This methodology presents a straightforward approach for analyzing analytes in the gas phase under ambient conditions utilizing an exceptionally uncomplicated experimental setup. In addition, the developed method can be used to detect trace 2,4-dinitrophenol, an explosive, with a limit of detection as low as ∼30 pg.

Distinguishing methicillin-resistant Staphylococcus aureus from methicillin-sensitive strains by combining Fe3O4 magnetic nanoparticle-based affinity mass spectrometry with a machine learning strategy.

Pathogenic bacteria, including drug-resistant variants such as methicillin-resistant Staphylococcus aureus (MRSA), can cause severe infections in the human body. Early detection of MRSA is essential for clinical diagnosis and proper treatment, considering the distinct therapeutic strategies for methicillin-sensitive S. aureus (MSSA) and MRSA infections. However, the similarities between MRSA and MSSA properties present a challenge in promptly and accurately distinguishing between them. This work introduces an approach to differentiate MRSA from MSSA utilizing matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) in conjunction with a neural network-based classification model. Four distinct strains of S. aureus were utilized, comprising three MSSA strains and one MRSA strain. The classification accuracy of our model ranges from ~ 92 to ~ 97% for each strain. We used deep SHapley Additive exPlanations to reveal the unique feature peaks for each bacterial strain. Furthermore, Fe3O4 MNPs were used as affinity probes for sample enrichment to eliminate the overnight culture and reduce the time in sample preparation. The limit of detection of the MNP-based affinity approach toward S. aureus combined with our machine learning strategy was as low as ~ 8 × 103 CFU mL-1. The feasibility of using the current approach for the identification of S. aureus in juice samples was also demonstrated.

Peptide Dendrimer-Based Antibacterial Agents: Synthesis and Applications.

Pathogenic bacteria cause the deaths of millions of people every year. With the development of antibiotics, hundreds and thousands of people's lives have been saved. Nevertheless, bacteria can develop resistance to antibiotics, rendering them insensitive to antibiotics over time. Peptides containing specific amino acids can be used as antibacterial agents; however, they can be easily degraded by proteases in vivo. To address these issues, branched peptide dendrimers are now being considered as good antibacterial agents due to their high efficacy, resistance to protease degradation, and low cytotoxicity. The ease with which peptide dendrimers can be synthesized and modified makes them accessible for use in various biological and nonbiological fields. That is, peptide dendrimers hold a promising future as antibacterial agents with prolonged efficacy without bacterial resistance development. Their in vivo stability and multivalence allow them to effectively target multi-drug-resistant strains and prevent biofilm formation. Thus, it is interesting to have an overview of the development and applications of peptide dendrimers in antibacterial research, including the possibility of employing machine learning approaches for the design of AMPs and dendrimers. This review summarizes the synthesis and applications of peptide dendrimers as antibacterial agents. The challenges and perspectives of using peptide dendrimers as the antibacterial agents are also discussed.

Europium Ion-Based Magnetic-Trapping and Fluorescence-Sensing Method for Detection of Pathogenic Bacteria.

Europium ions (Eu3+) have been utilized as a fluorescence-sensing probe for a variety of analytes, including tetracycline (TC). When Eu3+ is chelated with TC, its fluorescence can be greatly enhanced. Moreover, Eu3+ possesses 6 unpaired electrons in its f orbital, which makes it paramagnetic. Being a hard acid, Eu3+ can chelate with hard bases, such as oxygen-containing functional groups (e.g., phosphates and carboxylates), present on the cell surface of pathogenic bacteria. Due to these properties, in this study, Eu3+ was explored as a magnetic-trapping and sensing probe against pathogenic bacteria present in complex samples. Eu3+ was used as a magnetic probe to trap bacteria such as Staphylococcus aureus, Escherichia coli, Enterococcus faecalis, Acinetobacter baumannii, Bacillus cereus, and Pseudomonas aeruginosa. The addition of TC facilitated the easy detection of magnetic Eu3+-bacterium conjugates through fluorescence spectroscopy, with a detection limit of approximately ∼104 CFU mL-1. Additionally, matrix-assisted laser desorption/ionization mass spectrometry was employed to differentiate bacteria tapped by our magnetic probes.

Utilizing a Metal Inlet Coiled with Copper Wire as the Ion Source for Ambient Ionization Mass Spectrometry.

In ambient ionization mass spectrometry (MS), a customized metal inlet is typically adapted to the orifice of the mass spectrometer for ease of introduction of the sample. We herein explore that the metal inlet coiled with a copper wire (∼50 µm) can be directly used as an ion source to induce corona discharge-like processes for ionization of analytes in the gas phase. When the metal inlet is subjected to a high voltage in the mass spectrometer, the electric field provided by the mass spectrometer enables the generation of corona discharge to ionize volatile/semivolatile analytes derived from the sample in the condensed phase. The limit of detection for azulene derived from the aqueous sample was as low as ∼1 pM. Moreover, we also demonstrated the feasibility of coupling ultraviolet-visible absorption spectroscopy with MS by using the metal inlet coiled with a thin copper wire as the interface. Integration of these two techniques enables the simultaneous acquisition of spectra from both instruments for quantitative and qualitative analysis of the sample. Furthermore, we showed that polar and nonpolar analytes in a mixture can be acquired in the same mass spectrum by simply depositing a sample droplet (∼20 µL) on a dielectric substrate near the copper wire-coiled metal inlet of the mass spectrometer. The ionization processes involved both electrospray ionization and corona discharge. To demonstrate the applicability of our method for detecting nonpolar and polar analytes in complex samples, we spiked a nonpolar analyte, benzo[a]pyrene, to a spice sample and successfully detected analytes with different polarities using our approach.

Analysis and classification of coffee beans using single coffee bean mass spectrometry with machine learning strategy.

Coffee is a daily essential, with prices varying based on taste, aroma, and chemical composition. However, distinguishing between different coffee beans is challenging due to time-consuming and destructive sample pretreatment. This study presents a novel approach for directly analyzing single coffee beans through mass spectrometry (MS) without the need for sample pretreatment. Using a single coffee bean deposited with a solvent droplet containing methanol and deionized water, we generated electrospray to extract the main species for MS analysis. Mass spectra of single coffee beans were obtained in just a few seconds. To showcase the effectiveness of the developed method, we used palm civet coffee beans (kopi luwak), one of the most expensive coffee types, as model samples. Our approach distinguished palm civet coffee beans from regular ones with high accuracy, sensitivity, and selectivity. Moreover, we employed a machine learning strategy to rapidly classify coffee beans based on their mass spectra, achieving 99.58% accuracy, 98.75% sensitivity, and 100% selectivity in cross-validation. Our study highlights the potential of combining the single-bean MS method with machine learning for the rapid and non-destructive classification of coffee beans. This approach can help to detect low-priced coffee beans mixed with high-priced ones, benefiting both consumers and the coffee industry.

Using lanthanide ions as magnetic and sensing probes for the detection of tetracycline from complex samples.

Tetracycline (TC) is a broad-spectrum antibiotic and has been added to animal feeds to grow livestock under healthy conditions, making it important to have effective methods for rapidly detecting TC in complex samples. In this study, a novel method that uses lanthanide ions (i.e. Eu3+ and Gd3+) as magnetic and sensing probes for the detection of TC from aqueous samples is explored. When dissolving Gd3+ in tris(hydroxymethyl)aminomethane (Tris) buffer at pH 9, magnetic Gd3+-Tris conjugates can be readily generated. The magnetic Gd3+-Tris conjugates possess trapping capacity toward TC from sample solutions via the chelation of Gd3+ and TC. Eu3+ is used as the fluorescence sensing probe against TC on the Gd3+-TC conjugates via the antenna effect. The fluorescence response derived from Eu3+ is increased with the increase of TC trapped on the Gd3+-based probes. The linear dynamic range against TC ranges from 20 to 320 nM, whereas the limit of detection toward TC is ~2 nM. Furthermore, the developed sensing method can be employed for the visual assay of TC with a concentration above ~0.16 µM under UV light illumination in the dark. Furthermore, we have demonstrated the applicability of the developed method to quantify TC in a chicken broth sample with complex matrix. Our developed method offers several advantages, including high sensitivity and good selectivity, for the detection of TC in complex samples.

Using Magnetic Micelles Combined with Carbon Fiber Ionization Mass Spectrometry for the Screening of Trace Triazine Herbicides from Aqueous Samples.

Triazine herbicides are commonly used in agriculture to eliminate weeds. However, they can persist in the environment. In this study, we explored a new method for detecting triazine herbicides in aqueous samples. We selected two triazine herbicides, namely, prometryn and ametryn, as model herbicides. To generate magnetic probes, we mixed aqueous Gd3+ with aqueous sodium dodecyl sulfate (SDS), which created magnetic probes made of Gd3+-SDS micelles. These probes showed a trapping capacity for the model herbicides. Results indicated that the trapping capacities of our magnetic probes for ametryn and prometryn were approximately 466 and 468 nmol mg-1, respectively. The dissociation constants of our probes toward ametryn and prometryn were 2.92 × 10-5 and 1.27 × 10-5, respectively. This is the first report that the developed magnetic probes can be used to trap triazine herbicides. For detection, we used carbon fiber ionization mass spectrometry (CFI-MS), which can be used to directly detect semi-volatiles from the samples in the condensed phase. Because of the semi-volatility of triazine herbicides, the herbicides trapped by the magnetic probes can be directly analyzed by CFI-MS without any elution steps. In addition, we also demonstrated the feasibility of using our approach for detecting triazine herbicides in lake water and drinking water.

Zinc Ion-Based Switch-on Fluorescence-Sensing Probes for the Detection of Tetracycline.

Tetracycline (TC) is an antibiotic that has been widely used in the animal husbandry. Thus, TC residues may be found in animal products. Developing simple and sensitive methods for rapid screening of TC in complex samples is of great importance. Herein, we demonstrate a fluorescence-sensing method using Zn2+ as sensing probes for the detection of TC. Although TC can emit fluorescence under the excitation of ultraviolet light, its fluorescence is weak because of dynamic intramolecular rotations, leading to the dissipation of excitation energy. With the addition of Zn2+ prepared in tris(hydroxymethyl)amino-methane (Tris), TC can coordinate with Zn2+ in the Zn2+-Tris conjugates to form Tris-Zn2+-TC complexes. Therefore, the intramolecular motions of TC are restricted to reduce nonradiative decay, resulting in the enhancement of TC fluorescence. Aggregation-induced emission effects also play a role in the enhancement of TC fluorescence. Our results show that the linear dynamic range for the detection of TC is 15-300 nM. Moreover, the limit of detection was ~7 nM. The feasibility of using the developed method for determination of the concentration of TC in a complex chicken broth sample is also demonstrated in this work.

Using an insulating fiber as the sampling probe and ionization substrate for ambient ionization-mass spectrometric analysis of volatile, semi-volatile, and polar analytes.

A sharp metal needle used as the ionization emitter in conventional atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) is usually required for analyte ionization through corona discharge (i.e., gas discharge). Nevertheless, we herein demonstrate that an insulating fiber (tip diameter: 10-60 µm; length: ~ 1 cm) made of glass or bamboo can function as an APCI-like ionization emitter. Although no direct electric contact is made on the fiber, the ionization of volatiles and semi-volatiles occurs when the fiber is placed close (~ 1 mm) to the inlet of the mass spectrometer. No analyte ion signals can be observed without placing the insulating fiber in front of the mass spectrometer. The generation of ion species mainly relies on the electric field provided by the mass spectrometer. Presumably, owing to the high electric field provided by the mass spectrometer, the dielectric breakdown voltages of gas molecules in the air and the fiber are overcome, leading to the ionization of analytes in gas phase. In addition, the insulating fiber can function as a holder for sample solutions. Electrospray ionization-like processes derived from polar analytes such as amino acids, peptides, and proteins can readily occur when the insulating fiber deposited with a sample droplet is placed close to the inlet of the mass spectrometer. The feasibility of using the current approach for the detection of nonpolar and polar analytes from complex fetal bovine serum samples without tedious sample pretreatment is demonstrated in this work. The main advantage of using the suggested fiber is that the fiber can be used as the sampling probe to pick up samples and placed in front of a mass spectrometer for direct MS analysis. The application of using a robust, insulating, and disposable probe to pick up samples from real samples such as onion, honey, and pork samples followed by direct MS analysis is also demonstrated.

Direct Mass Spectrometric Analysis of Semivolatiles Derived from Real Samples at Atmospheric Pressure.

This study demonstrated a facile ionization method with the use of real samples for the ionization of their main compositions at ambient conditions for mass spectrometric analysis. Analyte ions derived from the real samples were readily observed in the mass spectrum when placing the samples close (≤1 mm) to the inlet of the mass spectrometer applied with a high voltage. No additional accessories such as an ionization emitter, a plasma generator, or a high voltage power supply were required for this approach. Ionization of semivolatiles derived from the samples occurred between the samples and the inlet of the mass spectrometer presumably owing to the dielectric breakdown induced by the electric field provided by the mass spectrometer. Real samples including plants, medicine tablets, and gloves with contaminants were used as the model samples. The putative ionization mechanisms are also discussed in this study.

Ionization of Volatile Organics and Nonvolatile Biomolecules Directly from a Titanium Slab for Mass Spectrometric Analysis.

Atmospheric pressure chemical ionization (APCI)-mass spectrometry (MS) and electrospray ionization (ESI)-MS can cover the analysis of analytes from low to high polarities. Thus, an ion source that possesses these two ionization functions is useful. Atmospheric surface-assisted ionization (ASAI), which can be used to ionize polar and nonpolar analytes in vapor, liquid, and solid forms, was demonstrated in this study. The ionization of analytes through APCI or ESI was induced from the surface of a metal substrate such as a titanium slab. ASAI is a contactless approach operated at atmospheric pressure. No electric contacts nor any voltages were required to be applied on the metal substrate during ionization. When placing samples with high vapor pressure in condensed phase underneath a titanium slab close to the inlet of the mass spectrometer, analytes can be readily ionized and detected by the mass spectrometer. Furthermore, a sample droplet (~2 µL) containing high-polarity analytes, including polar organics and biomolecules, was ionized using the titanium slab. One titanium slab is sufficient to induce the ionization of analytes occurring in front of a mass spectrometer applied with a high voltage. Moreover, this ionization method can be used to detect high volatile or polar analytes through APCI-like or ESI-like processes, respectively.

Rapid Detection of Pathogenic Bacteria by the Naked Eye.

Escherichia coli O157:H7 and Staphylococcus aureus are common pathogens. Gram-negative bacteria, such as E. coli, contain high concentrations of endogenous peroxidases, whereas Gram-positive bacteria, such as S. aureus, possess abundant endogenous catalases. Colorless 3,5,3',5'-tetramethyl benzidine (TMB) changes to blue oxidized TMB in the presence of E. coli and a low concentration of H2O2 (e.g., ~11 mM) at pH of 3. Moreover, visible air bubbles containing oxygen are generated after S. aureus reacts with H2O2 at a high concentration (e.g., 180 mM) at pH of 3. A novel method for rapidly detecting the presence of bacteria on the surfaces of samples, on the basis of these two endogenous enzymatic reactions, was explored. Briefly, a cotton swab was used for collecting bacteria from the surfaces of samples, such as tomatoes and door handles, then two-step endogenous enzymatic reactions were carried out. In the first step, a cotton swab containing bacteria was immersed in a reagent comprising H2O2 (11.2 mM) and TMB for 25 min. In the second step, the swab was dipped further in H2O2 (180 mM) at pH 3 for 5 min. Results showed that the presence of Gram-negative bacteria, such as E. coli with a cell number of ≥ ~105, and Gram-positive bacteria, such as S. aureus with a cell number of ≥ ~106, can be visually confirmed according to the appearance of the blue color in the swab and the formation of air bubbles in the reagent solution, respectively, within ~30 min. To improve visual sensitivity, we dipped the swab carrying the bacteria in a vial containing a growth broth, incubated it for ~4 h, and carried out the two-stage reaction steps. Results showed that bluish swabs resulting from the presence of E. coli O157: H7 with initial cell numbers of ≥ ~34 were obtained, whereas air bubbles were visible in the samples containing S. aureus with initial cell numbers of ≥ ~8.5 × 103.

Functional magnetic nanoparticle-based affinity probe for MALDI mass spectrometric detection of ricin B.

The use of lactosylated Fe3O4 magnetic nanoparticles (MNP@LAC) has been explored as affinity probes against ricin B based on galactose-ricin B binding interactions. Lactose was bound onto the surface of aminated MNPs through the Maillard reaction. The enrichment of ricin B took ~1 h by incubating MNP@LAC with samples under shaking at room temperature, followed by magnetic isolation. The resultant MNP@LAC-ricin B conjugates were characterized by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). The limit of detection toward ricin B was ~3 nM by using the developed method. It was possible to detect the peptides derived from the tryptic digest of trace ricin B (~0.39 nM) enriched by the MNP@LAC probes followed by tryptic digestion and MALDI-MS analysis. The feasibility of using the developed method for detection of ricin B from complex white corn starch samples spiked with trace ricin B was demonstrated.

Magnetic Graphene Oxide-Based Affinity Surface-Assisted Laser Desorption/Ionization Mass Spectrometry for Screening of Aflatoxin B1 from Complex Samples.

Aflatoxin B1 (AFB1), commonly found in agriculture products, has been considered as a carcinogen. Thus, to develop analytical methods that can be used to rapidly screen the presence of AFB1 in complex samples is important. Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) uses inorganic materials as assisting materials to facilitate desorption/ionization of analytes. The feasibility of using GO as the affinity probe against AFB1 and as the assisting material in SALDI-MS analysis was first demonstrated. We also explored a facile method to impose magnetism on GO to generate magnetic GO (MGO) nanoprobes by simply incubating GO in aqueous FeCl3 under microwave heating. The generated MGO nanoprobes possessed magnetism and were capable of enriching trace AFB1 from complex samples. AFB1 enrichment took only 6 min by incubating MGO with samples under microwave heating (power = 90 W). Followed by magnetic isolation, the isolated conjugates were ready for SALDI-MS analysis. The enrichment steps including trapping and isolation can be completed within ∼10 min. The lowest detectable concentration of our method toward AFB1 was ∼1 nM. Results also showed that AFB1 can be selectively detected from complex samples, including cell lysates of fungal spores, AFB1-spiked peanut, and wheat samples, by using the developed method. The selectivity of our method against AFB1 from the samples containing other toxins including aflatoxin G1 and ochratoxin A was also examined. According to these results, we believe that the developed method should have the potential to be used for rapid screening of AFB1 from real-world samples.

Reactive carbon fiber ionization-mass spectrometry for characterization of unsaturated hydrocarbons from plant aroma.

Carbon fiber ionization (CFI)-mass spectrometry (MS) is an ambient technique that can be used to detect samples in gas, liquid, and solid forms simply by using a piece of carbon fiber as the ionization emitter. Reactive MS can be performed to selectively detect target analytes by conducting fast reactions during ionization. Most ambient ionization MS techniques used to monitor chemical reactions are limited to liquid-phase reactions. Herein, we develop reactive CFI-MS to be a suitable tool for monitoring of reaction products derived from volatile unsaturated hydrocarbons in the gas phase. Hydroamination is a fast reaction that can form a carbon-nitrogen bond through the addition of an amine to unsaturated hydrocarbons. In this study, reactive CFI-MS was used to selectively characterize aroma molecules, which are unsaturated hydrocarbons derived from plants, through hydroamination. A piece of carbon fiber was placed close (~ 1 mm) to the inlet of the mass spectrometer and deposited with dried methylamine. The sample in either liquid or solid form was placed underneath the carbon fiber. The volatiles derived from the sample reacted with amine on the carbon fiber were simultaneously determined once the mass spectrometer was switched on. For proof of concept, ethylene glycol dimethacrylate, which has double bonds and is highly volatile, was initially selected as the model sample to demonstrate the feasibility of using reactive CFI-MS to detect its hydroamination derivative. Banana, garlic, and ginger, which possess aroma molecules with unsaturated hydrocarbons, were selected as real-world samples. Graphical abstract.

Using gadolinium ions as affinity probes to selectively enrich and magnetically isolate bacteria from complex samples.

Magnetic trapping has been employed in the development of analytical methods owing to its ease and simplicity in handling samples. Nevertheless, the generation of functional probes is usually time consuming. A new and simple affinity method that uses gadolinium ion (Gd3+), a magnetic ion, as affinity probe for magnetic tapping of pathogenic bacteria was demonstrated in the present study. Escherichia coli O157:H7, Staphylococcus aureus, and Acinetobacter baumannii were selected as model bacteria. The model bacteria were magnetically isolated after incubation in Tris buffer (pH 8) containing Gd3+ (0.1 M) under microwave heating (power: 180 W, 90 s × 3). The resultant Gd3+-bacterium conjugates possessed sufficient magnetism, resulting in magnetic aggregations by an external magnet (∼4,000 Gauss). For ease of magnetic isolation, the sample containing Gd3+-bacterium complexes was stirred by a small magnet. After 1 h, the magnet attached with precipitates, i.e., Gd3+-bacterium conjugates, was readily removed using a pair of tweezers. The bacteria in the resultant conjugates were characterized by matrix-assisted laser desorption/ionization mass spectrometry. The limits of detection of the current approach toward E. coli O157:H7, S. aureus, and A. baumannii in complex samples were ∼104-105 cells mL-1.

Using lactosylated cysteine functionalized gold nanoparticles as colorimetric sensing probes for rapid detection of the ricin B chain.

A new colorimetric method that can be used to rapidly detect toxic ricin is demonstrated. Lactosylated cysteine-functionalized gold nanoparticles (Au@LACY NPs) were prepared by a one-pot reaction and employed as optical probes for determination of ricin B chain. It is found that the Au@LACY NPs undergo aggregation in the presence of ricin B chain. This leads to surface plasmon coupling effects of the particles and a color change from red to blue, with absorption maxima at 519 and 670 nm, respectively. The feasibility of using the current approach for quantitative analysis of ricin B chain is also demonstrated. The calibration plot is generated by plotting the ratio of the absorbance at the wavelength of 634 to 518 nm versus the concentration of the ricin B chain. The spectrophotometric method has a ~29 pM (~ 0.91 ng·mL-1) detection limit, and the sample with the concentration of ~ 400 pM (~ 13 ng·mL-1) can be detected visually. Graphical abstractSchematic representation of using lactosylated cysteine capped gold nanoparticles (Au@LACY NPs) as colorimetric probes for the ricin B chain through surface plasmon coupling effects. Sample solution turns from red to blue in the presence of ricin B chain.

Tail Fiber Protein-Immobilized Magnetic Nanoparticle-Based Affinity Approaches for Detection of Acinetobacter baumannii.

Acinetobacter baumannii (A. baumannii) strains are common nosocomial pathogens that can cause infections and can easily become resistant to antibiotics. Thus, analytical methods that can be used to rapidly identify A. baumannii from complex samples should be developed. Tail fiber proteins derived from the tail fibers of bacteriophages can recognize specific bacterial surface polysaccharides. For example, recombinant tail proteins, such as TF2 and TF6 derived from the tail fibers of bacteriophages ϕAB2 and ϕAB6, can recognize A. baumannii clinical isolates M3237 and 54149, respectively. Thus, TF2 and TF6 can be used as probes to target specific A. baumannii strains. Generally, TF2 and TF6 are tagged with a hexahistidine (His6) for ease of purification. Given that His6 possesses specific affinity toward alumina through His6-Al chelation, TF2- and TF6-immobilized alumina-coated magnetic nanoparticles (Fe3O4@Al2O3 MNPs) were generated through chelation under microwave heating (power, 900 W) for 60 s in this study. The as-prepared TF2-Fe3O4@Al2O3 and TF6-Fe3O4@Al2O3 MNPs were used as affinity probes to trap trace A. baumannii M3237 and 54149, respectively, from sample solutions. Matrix-assisted laser desorption/ionization mass spectrometry capable of identifying bacteria on the basis of the obtained fingerprint mass spectra of intact bacteria was used as the detection tool. Results demonstrated that the current approach can be used to distinguish A. baumannii M3237 from A. baumannii 54149 by using TF2-Fe3O4@Al2O3 and TF6-Fe3O4@Al2O3 MNPs as affinity probes. Furthermore, the limits of detection of the current method for A. baumannii M3237 and 54149 are ∼105 and ∼104 cells mL-1, respectively. The feasibility of using the developed method to selectively detect A. baumannii M3237 and 54149 from complex serum samples was demonstrated.

Gold nanocluster-based fluorescence sensing probes for detection of dipicolinic acid.

Bacillus spp. are spore-forming bacteria, and some of them, including Bacillus cereus and Bacillus anthracis, are pathogens. Dipicolinic acid (DPA) has been recognized as a biomarker for spore-forming bacteria. Thus, developing rapid sensing methods to spot the presence of DPA in suspicious samples is significant. In this study, we employ complexes of glutathione-capped gold nanoclusters (Au@GSH NCs) with Cu2+ as sensing probes against DPA. Au@GSH NCs possess orange-reddish fluorescence. However, their fluorescence is significantly quenched in the presence of Cu2+. In the presence of DPA, the fluorescence of Au@GSH NCs can be restored because DPA can easily remove Cu2+ on the NCs through chelation based on the high formation constant (log K = 7.97) between Cu2+ and DPA. Therefore, on the basis of this fact, Au@GSH NC-Cu2+ complexes are used as turn-on fluorescence probes against DPA. Unlike most of the existing sensing methods, the developed Au@GSH-Cu2+-based sensing method is not affected by the presence of phosphates, which can be commonly found in real samples. The limit of detection of using the developed sensing method toward DPA can reach as low as ∼19 nM. In addition, we also demonstrate the feasibility of using the developed sensing method for detection and quantification of DPA in soil samples and B. cereus spore lysates.