Exploring ALK fusion in colorectal cancer: a case series and comprehensive analysis.

Anaplastic lymphoma kinase (ALK) fusion-positive colorectal cancer (CRC) is a rare and chemotherapy-refractory subtype that lacks established and effective treatment strategies. Additionally, the efficacy and safety of ALK inhibitors (ALKi) in CRC remain undetermined. Herein, we examined a series of ALK-positive CRC patients who underwent various lines of ALKi treatment. Notably, we detected an ALK 1196M resistance mutation in a CRC patient who received multiple lines of chemotherapy and ALKi treatment. Importantly, we found that Brigatinib and Lorlatinib demonstrated some efficacy in managing this patient, although the observed effectiveness was not as pronounced as in non-small cell lung cancer cases. Furthermore, based on our preliminary analyses, we surmise that ALK-positive CRC patients are likely to exhibit inner resistance to Cetuximab. Taken together, our findings have important implications for the treatment of ALK-positive CRC patients.

High-performance flexible p-type Ce-filled Fe3CoSb12 skutterudite thin film for medium-to-high-temperature applications.

P-type Fe3CoSb12-based skutterudite thin films are successfully fabricated, exhibiting high thermoelectric performance, stability, and flexibility at medium-to-high temperatures, based on preparing custom target materials and employing advanced pulsed laser deposition techniques to address the bonding challenge between the thin films and high-temperature flexible polyimide substrates. Through the optimization of fabrication processing and nominal doping concentration of Ce, the thin films show a power factor of >100 µW m-1 K-2 and a ZT close to 0.6 at 653 K. After >2000 bending cycle tests at a radius of 4 mm, only a 6 % change in resistivity can be observed. Additionally, the assembled p-type Fe3CoSb12-based flexible device exhibits a power density of 135.7 µW cm-2 under a temperature difference of 100 K with the hot side at 623 K. This work fills a gap in the realization of flexible thermoelectric devices in the medium-to-high-temperature range and holds significant practical application value.

Boosting thermoelectric performance of single-walled carbon nanotubes-based films through rational triple treatments.

Single-walled carbon nanotubes (SWCNTs)-based thermoelectric materials, valued for their flexibility, lightweight, and cost-effectiveness, show promise for wearable thermoelectric devices. However, their thermoelectric performance requires significant enhancement for practical applications. To achieve this goal, in this work, we introduce rational "triple treatments" to improve the overall performance of flexible SWCNT-based films, achieving a high power factor of 20.29 µW cm-1 K-2 at room temperature. Ultrasonic dispersion enhances the conductivity, NaBH4 treatment reduces defects and enhances the Seebeck coefficient, and cold pressing significantly densifies the SWCNT films while preserving the high Seebeck coefficient. Also, bending tests confirm structural stability and exceptional flexibility, and a six-legged flexible device demonstrates a maximum power density of 2996 µW cm-2 at a 40 K temperature difference, showing great application potential. This advancement positions SWCNT films as promising flexible thermoelectric materials, providing insights into high-performance carbon-based thermoelectrics.

Silver Copper Chalcogenide Thermoelectrics: Advance, Controversy, and Perspective.

Thermoelectric technology, which enables a direct and pollution-free conversion of heat into electricity, provides a promising path to address the current global energy crisis. Among the broad range of thermoelectric materials, silver copper chalcogenides (AgCuQ, Q = S, Se, Te) have garnered significant attention in thermoelectric community in light of inherently ultralow lattice thermal conductivity, controllable electronic transport properties, excellent thermoelectric performance across various temperature ranges, and a degree of ductility. This review epitomizes the recent progress in AgCuQ-based thermoelectric materials, from the optimization of thermoelectric performance to the rational design of devices, encompassing the fundamental understanding of crystal structures, electronic band structures, mechanical properties, and quasi-liquid behaviors. The correlation between chemical composition, mechanical properties, and thermoelectric performance in this material system is also highlighted. Finally, several key issues and prospects are proposed for further optimizing AgCuQ-based thermoelectric materials.

Remarkable purification of organic dyes by NiOOH-modified industrial waste residues.

Extracting functional materials from industrial waste residues to absorb organic dyes can maximize waste reuse and minimize water pollution. However, the extraordinarily low purification efficiency still limits the practical application of this strategy. Herein, the lamellar NiOOH is in-situ anchored on the industrial waste red mud surface (ARM/NiOOH) as an adsorbent to purify organic dyes in wastewater. ARM/NiOOH adsorbent with high specific surface area and porosity provides considerable active sites for the congo red (CR), thereby significantly enhancing the removal efficiency of CR. Besides, we fit a reasonable adsorption model for ARM/NiOOH adsorbent and investigate its adsorption kinetics. Resultantly, ARM/NiOOH adsorbent can remarkably adsorb 348.0 mg g-1 CR within 5 min, which is 7.91 times that of raw RM. Our work provides a strategy for reusing industrial waste and purifying sewage pollution, which advances wastewater treatment engineering.

TGR5-mediated lateral hypothalamus-dCA3-dorsolateral septum circuit regulates depressive-like behavior in male mice.

Although bile acids play a notable role in depression, the pathological significance of the bile acid TGR5 membrane-type receptor in this disorder remains elusive. Using depression models of chronic social defeat stress and chronic restraint stress in male mice, we found that TGR5 in the lateral hypothalamic area (LHA) predominantly decreased in GABAergic neurons, the excitability of which increased in depressive-like mice. Upregulation of TGR5 or inhibition of GABAergic excitability in LHA markedly alleviated depressive-like behavior, whereas down-regulation of TGR5 or enhancement of GABAergic excitability facilitated stress-induced depressive-like behavior. TGR5 also bidirectionally regulated excitability of LHA GABAergic neurons via extracellular regulated protein kinases-dependent Kv4.2 channels. Notably, LHA GABAergic neurons specifically innervated dorsal CA3 (dCA3) CaMKIIα neurons for mediation of depressive-like behavior. LHA GABAergic TGR5 exerted antidepressant-like effects by disinhibiting dCA3 CaMKIIα neurons projecting to the dorsolateral septum (DLS). These findings advance our understanding of TGR5 and the LHAGABA→dCA3CaMKIIα→DLSGABA circuit for the development of potential therapeutic strategies in depression.

Methylated ctDNA predicts early recurrence risk in patients undergoing resection of initially unresectable colorectal cancer liver metastases.

Background: Patients with initially unresectable colorectal cancer liver metastases (IU-CRLM) might benefit from using an effective systemic treatment followed by resection of liver metastases but the curative success rate is quite low. Indeed, nearly one-third of patients exhibit early recurrence within the first 6 months after surgery, and these individuals often have poor overall survival. Objectives: This study aims to clarify the application value of serial circulating tumor DNA (ctDNA) analysis in predicting the clinical outcome of IU-CRLM patients following liver metastasectomy. Design: A retrospective study was conducted on a cohort of patients with IU-CRLM between February 2018 and April 2021. Methods: Plasma samples at different time points during CRLM treatment [baseline (BL), preoperation (PRE), postoperation (POST), end-of-treatment (EOT), and progressive disease (PD)] were retrospectively collected from patients with initially unresectable CRLM enrolled at the Sun Yat-sen University Cancer Center. Dynamic changes of SEPTIN 9 (SEPT9) and Neuropeptide Y (NPY) methylated circulating tumor DNA (MetctDNA) levels in serial plasma samples were detected using droplet-digital PCR (ddPCR). Results: SEPT9 and NPY genes were hypermethylated in colon cancer cell lines and tissues while no difference was observed between primary and metastatic tumors. Patients with MetctDNA positive at POST or EOT had significantly lower recurrence-free survival (RFS) compared to patients with MetctDNA negative at these time points [POST: Hazard ratio (HR) 9.44, 95% confidence interval (CI) 5.15-17.30, p < 0.001; EOT: HR 11.48, 95% CI 3.27-40.31, p < 0.001]. Multivariate analysis demonstrated that POST (OR 33.96, 95% CI 4.03-286.10, p = 0.001) and EOT (OR 18.36, 95% CI 1.14-295.71, p = 0.04) MetctDNA was an independent risk factor for early recurrence. Time-dependent receiver operating characteristic curve (T-ROC) analysis revealed that area under the curve (AUC) value was greatest at the relapse time point of 6 months post-intervention, with POST-AUC and EOT-AUC values of 0.74 (95% CI 0.66-0.81) and 0.73 (95% CI 0.53-0.94), respectively. Serial MetctDNA analysis showed that RFS was significantly lower in patients with no MetctDNA clearance compared with those with MetctDNA clearance (HR 26.05, 95% CI 4.92-137.81, p < 0.001). Conclusion: Our study confirmed that serial ctDNA analysis of NPY and SEPT9 gene methylation could effectively predict early recurrence in IU-CRLM patients, especially at POST and EOT.

Zinc Doping Induces Enhanced Thermoelectric Performance of Solvothermal SnTe.

The creation of hierarchical nanostructures can effectively strengthen phonon scattering to reduce lattice thermal conductivity for improving thermoelectric properties in inorganic solids. Here, we use Zn doping to induce a remarkable reduction in the lattice thermal conductivity in SnTe, approaching the theoretical minimum limit. Microstructure analysis reveals that ZnTe nanoprecipitates can embed within SnTe grains beyond the solubility limit of Zn in the Zn alloyed SnTe. These nanoprecipitates result in a substantial decrease of the lattice thermal conductivity in SnTe, leading to an ultralow lattice thermal conductivity of 0.50 W m-1 K-1 at 773 K and a peak ZT of ~0.48 at 773 K, marking an approximately 45 % enhancement compared to pristine SnTe. This study underscores the effectiveness of incorporating ZnTe nanoprecipitates in boosting the thermoelectric performance of SnTe-based materials.

Decoupling Carrier-Phonon Scattering Boosts the Thermoelectric Performance of n-Type GeTe-Based Materials.

The coupled relationship between carrier and phonon scattering severely limits the thermoelectric performance of n-type GeTe materials. Here, we provide an efficient strategy to enlarge grains and induce vacancy clusters for decoupling carrier-phonon scattering through the annealing optimization of n-type GeTe-based materials. Specifically, boundary migration is used to enlarge grains by optimizing the annealing time, while vacancy clusters are induced through the aggregation of Ge vacancies during annealing. Such enlarged grains can weaken carrier scattering, while vacancy clusters can strengthen phonon scattering, leading to decoupled carrier-phonon scattering. As a result, a ratio between carrier mobility and lattice thermal conductivity of ∼492.8 cm3 V-1 s-1 W-1 K and a peak ZT of ∼0.4 at 473 K are achieved in Ge0.67Pb0.13Bi0.2Te. This work reveals the critical roles of enlarged grains and induced vacancy clusters in decoupling carrier-phonon scattering and demonstrates the viability of fabricating high-performance n-type GeTe materials via annealing optimization.

Simultaneously Boosting Thermoelectric and Mechanical Properties of n-Type Mg3Sb1.5Bi0.5-Based Zintls through Energy-Band and Defect Engineering.

Incorporating donor doping into Mg3Sb1.5Bi0.5 to achieve n-type conductivity is one of the crucial strategies for performance enhancement. In pursuit of higher thermoelectric performance, we herein report co-doping with Te and Y to optimize the thermoelectric properties of Mg3Sb1.5Bi0.5, achieving a peak ZT exceeding 1.7 at 703 K in Y0.01Mg3.19Sb1.5Bi0.47Te0.03. Guided by first-principles calculations for compositional design, we find that Te-doping shifts the Fermi level into the conduction band, resulting in n-type semiconductor behavior, while Y-doping further shifts the Fermi level into the conduction band and reduces the bandgap, leading to enhanced thermoelectric performance with a power factor as high as >20 µW cm-1 K-2. Additionally, through detailed micro/nanostructure characterizations, we discover that Te and Y co-doping induces dense crystal and lattice defects, including local lattice distortions and strains caused by point defects, and densely distributed grain boundaries between nanocrystalline domains. These defects efficiently scatter phonons of various wavelengths, resulting in a low thermal conductivity of 0.83 W m-1 K-1 and ultimately achieving a high ZT. Furthermore, the dense lattice defects induced by co-doping can further strengthen the mechanical performance, which is crucial for its service in devices. This work provides guidance for the composition and structure design of thermoelectric materials.

Flexible power generators by Ag2Se thin films with record-high thermoelectric performance.

Exploring new near-room-temperature thermoelectric materials is significant for replacing current high-cost Bi2Te3. This study highlights the potential of Ag2Se for wearable thermoelectric electronics, addressing the trade-off between performance and flexibility. A record-high ZT of 1.27 at 363 K is achieved in Ag2Se-based thin films with 3.2 at.% Te doping on Se sites, realized by a new concept of doping-induced orientation engineering. We reveal that Te-doping enhances film uniformity and (00l)-orientation and in turn carrier mobility by reducing the (00l) formation energy, confirmed by solid computational and experimental evidence. The doping simultaneously widens the bandgap, resulting in improved Seebeck coefficients and high power factors, and introduces TeSe point defects to effectively reduce the lattice thermal conductivity. A protective organic-polymer-based composite layer enhances film flexibility, and a rationally designed flexible thermoelectric device achieves an output power density of 1.5 mW cm-2 for wearable power generation under a 20 K temperature difference.

Clinical and molecular characteristics of RNF43 mutations as promising prognostic biomarkers in colorectal cancer.

Background: Transmembrane E3 ubiquitin ligase (RNF43) mutations are present in approximately 6-18% of colorectal cancers (CRC) and could enhance Wnt/ß-catenin signaling, which is emerging as a promising therapeutic target. This study aims to investigate the clinical and molecular characteristics and potential heterogeneity of RNF43-mutant CRC. Methods: A total of 78 patients with RNF43-mutant CRC were enrolled from July 2013 to November 2022. Demographic data, clinical characteristics, treatment regimens used, and survival outcomes were collected and analyzed. Results: Our study uncovered that patients with RNF43 mutations in the N-terminal domain (NTD; n = 50) exhibited shorter overall survival (OS; median months, 50.80 versus not reached; p = 0.043) compared to those in the C-terminal domain (CTD; n = 17). Most RNF43 mutations in NTD had positive primary lymph node status, low tumor mutation burden (TMB-L), and correlated with proficient mismatch repair (pMMR)/microsatellite stable (MSS) status. By contrast, RNF43 mutations in CTD were significantly enriched in deficient MMR (dMMR)/microsatellite instability (MSI-H) tumors with high TMB (TMB-H). N-terminal RNF43-mutated tumors harbored a hotspot variant (RNF43 R117fs), which independently predicted a significantly worse outcome in pMMR/MSS CRC with a median OS of 18.9 months. Patients with RNF43 mutations and the BRAF V600E alterations demonstrated sensitivity to BRAF/EGFR inhibitors. Moreover, we observed that pMMR/MSS patients with RNF43 R117fs mutation had a higher incidence of stage IV, ⩾2 metastatic sites, low TMB, and none of them received PD-1/PD-L1 inhibitor therapy. Conclusion: Our findings provide the first evidence that RNF43 mutations in NTD and the R117fs variant correlate with a poorer prognosis in CRC patients, providing strategies for Wnt-targeted therapy to improve clinical efficacy.

[Correlation analysis of serum MMP-1 and MMP-2 levels with lower extremity deep venous thrombosis after operation for lower limb fracture].

OBJECTIVE: To investigate the relationship between serum matrix metalloproteinase-1(MMP-1) and matrix metalloproteinase-2(MMP-2) and the formation of deep venous thrombosis(LDVT) in lower extremity patients after surgery for lower extremity fracture, and to analyze the value of MMP-1 and MMP-2 in predicting the occurrence of LDVT after lower extremity fracture. METHODS: From June 2018 to December 2021, 352 patients who planned to receive surgical treatment of lower limb fracture in our hospital were selected as the research objects. Venous blood was collected at 1, 2 and 3 days after surgery, respectively, and serum MMP-1 and MMP-2 levels were detected. The incidence of LDVT during hospitalization was analyzed, and the risk factors of postoperative LDVT in patients with lower limb fracture surgery and the predictive value of MMP-1 and MMP-2 for LDVT were analyzed. RESULTS: LDVT occurred in 40 patients (LDVT group), the incidence of LDVT was 11.36%, and 312 patients did not occurred(no occurred group). The serum levels of MMP-1 and MMP-2 in LDVT group increased gradually after surgery; the serum levels of MMP-1 and MMP-2 in the no occurred group increased slightly after surgery at 2 days and then decreased at 3 days after surgery (P<0.01);the serum levels of MMP-1 and MMP-2 in LDVT group were higher than those in the no occurred group at 2 days and 3 days after surgery (P<0.05). Serum levels of MMP-1 and MMP-2 were positively correlated with serum levels of interleukin-6 (IL-6), IL-8 and tumor necrosis factor -α (TNF-α) in LDVT patients at 2 days and 3 days postoperatively (P<0.05). Operative time, MMP-1 and MMP-2 postoperative 3 days were related to the occurrence of LDVT after lower limb fracture (P<0.01). The area under the curve(AUC) predicted by MMP-1 and MMP-2 postoperative 3 days for LDVT after lower limb fracture was 0.738 and 0.744 respectively, and the AUC predicted by combined MMP-1 and MMP-2 was 0.910, which was higher than that predicted by single indicator(Z=2.819 and 2.025, P<0.05). CONCLUSION: High levels of MMP-1 and MMP-2 after lower extremity fracture are closely related to the occurrence of LDVT, and 3 d mMP-1 and MMP-2 after surgery maybe used as evaluation indexes for LDVT risk prediction.

High-efficiency broadband fiber-to-chip coupler using a 3D nanoprinting microfiber.

We propose a method for coupling a tapered optical fiber to an inverted tapered SiN waveguide by fabricating a microfiber using 3D nanoprinting lithography. The microfiber consists of three parts: a tapered cladding cap, an S-bend, and a straight part, all composed of high-refractive-index material. Light is adiabatically coupled from the tapered fiber to the printed microfiber through the cladding cap. The light is then transmitted through the S-bend and the straight part with low loss and is finally coupled to the waveguide through the evanescent field. In the simulation, our design can achieve a high coupling efficiency (TE mode) of ∼97% at a wavelength of 1542 nm with a wide bandwidth of ∼768n m at the 1-dB cutoff criterion.

Z-ligustilide preferentially caused mitochondrial dysfunction in AML HL-60 cells by activating nuclear receptors NUR77 and NOR1.

BACKGROUND: Nuclear receptors NUR77 and NOR1 were identified as critical targets in acute myeloid leukemia (AML) therapy. Previously, we showed that Z-ligustilide (Z-LIG) selectively targeted AML by restoring NUR77 and NOR1. However, its downstream mechanisms are yet to be elucidated. METHODS: SRB staining assay was used to measure cell viability. Cell apoptosis, mitochondrial membrane potential and mitochondrial reactive oxygen species were analyzed using flow cytometry. The potential targets of Z-LIG in AML HL-60 cells were evaluated by RNA sequencing. Changes in RNA levels were measured using quantitative RT-qPCR and western blot analysis was used to detect the expression of proteins. RESULTS: Z-LIG preferentially induced mitochondrial dysfunction in HL-60 cells compared with 293T cells. Furthermore, RNA sequencing revealed that mitochondrial transcription and translation might be potential Z-LIG targets inhibiting HL-60 cells. NUR77/NOR1 overexpression significantly reduced the mitochondrial ATP and mitochondrial membrane potential and increased mitochondrial reactive oxygen species in HL-60 cells but not in 293T cells. Moreover, Z-LIG induced mitochondrial dysfunction by restoring NUR77 and NOR1 in HL-60 cells. Compared with HL-60 cells, the apoptosis-inducing activities of NUR77/NOR1 and Z-LIG were significantly reduced in HL-60 ρ0 cells depleted in mitochondrial DNA (mt-DNA). Moreover, NUR77/NOR1 and Z-LIG downregulated mitochondrial transcription and translation related proteins in HL-60 cells. Notably, Z-LIG remarkably reduced mitochondrial ATP in primary AML cells and showed anti-AML activity in mouse models of human AML. CONCLUSIONS: Collectively, our findings suggested that Z-LIG selectively induces mitochondrial dysfunction in AML HL-60 cells by restoring NUR77 and NOR1, a process associated with interference in mtDNA transcription.

Flexible, recoverable, and efficient photocatalysts: MoS2/TiO2 heterojunctions grown on amorphous carbon-coated carbon textiles.

Most traditional powder photocatalysts are not easily recovered. Herein, we report a flexible and recoverable photocatalyst with superior photocatalytic activity, in which MoS2/TiO2 heterojunctions are grown on amorphous carbon-coated carbon textiles (CT@C-MoS2/TiO2). Recoverable CT@C-MoS2/TiO2 textile was used to degrade 10 mg L-1 rhodamine B, leading to a degradation rate of up to 98.8 % within 30 min. Such a degradation rate is much higher than that of most of the reported studies. A density functional theory (DFT) calculation results illustrate charge transfer mechanism inside TiO2-C, MoS2-C, and MoS2/TiO2 heterojunctions, which shows that CT@C-MoS2/TiO2 textile with three electron separation channels has a high photogenerated carrier separation rate, which remarkably enhances the photocatalytic activity. Our work provides a novel strategy to design an efficient and recoverable photocatalyst with high activity.

A novel nomogram integrated with PDL1 and CEA to predict the prognosis of patients with gastric cancer

Introduction This study aimed to develop a prognostic nomogram for patients with gastric cancer (GC) based on the levels of programmed death 1 ligand 1 (PDL1) and carcinoembryonic antigen (CEA). Methods The nomogram was developed using data from a primary cohort of 247 patients who had been clinicopathologically diagnosed with GC, as well as a validation cohort of 63 patients. Furthermore, the nomogram divided the patients into three different risk groups for overall survival (OS)—the low-risk, middle-risk, and high-risk groups. Univariate and multivariate Cox hazard analyses were used to determine all of the factors included in the model. Decision curve analysis and receiver operating characteristic (ROC) curves were used to assess the accuracy of the nomogram. Results The Kaplan–Meier survival analysis revealed that metastasis stage, clinical stage, and CEA and PDL1 levels were predictors for progress-free survival (PFS) and OS of patients with GC. Metastasis stage, clinical stage, and CEA and PDL1 levels were found to be independent risk factors for the PFS and OS of patients with GC in a multivariate analysis, and the nomogram was based on these factors. The concordance index of the nomogram was 0.763 [95% confidence interval (CI) 0.740–0.787]. The area under the concentration–time curve of the nomogram model was 0.81 (95% CI 0.780–0.900). According to the decision curve analysis and ROC curves, the nomogram model had a higher overall net efficiency in forecasting OS than clinical stage, CEA and PDL1 levels. Conclusion In conclusion, we proposed a novel nomogram that integrated PDL1 and CEA, and the proposed nomogram provided more accurate and useful prognostic predictions for patients with GC (AU)

A strategy-purifying wastewater with waste materials: Zn2+ modified waste red mud as recoverable adsorbents with an enhanced removal capacity of congo red.

The strategy, called purifying wastewater with waste materials (PWWM), can simultaneously improve the secondary utilization of industrial waste materials and in turn, reduce environmental pollution. However, the PWWM strategy has still not been extensively used because of its low purification efficiency of organic pollutants and extremely difficult secondary utilization process. Herein, we use zinc aluminum silicate (ZAS) to modify waste granular red mud (GRM) to form a recoverable adsorbent, called ZAS/GRM adsorbent. The ZAS has been found to exhibit exceptional adsorption performance with the ability to firmly anchor onto the surface of GRM, in which heavy metal ions can effectively solidify and reduce their outflow. Furthermore, many voids have been tactfully designed in the ZAS/GRM adsorbents by using a water vapor project, which provide more active sites for congo red (CR) organic dye, thereby remarkably improving the removal efficiency of CR. From our purification of CR, we find that the CR adsorption capacity of the ZAS/GRM adsorbent is 3.509 mg g-1, which is four times higher than pure GRM (0.820 mg g-1). This study demonstrates our PWWM strategy is highly effective and can inspire more research on waste reuse.

Ultrafast and Cost-Effective Fabrication of High-Performance Carbon-Based Flexible Thermoelectric Hybrid Films and Their Devices.

Due to their cost-effectiveness and industry-scale feasibility, carbon-based composites have been considered to be promising thermoelectric materials for low-grade power generation. However, current fabrications for carbon-based composites are time-consuming, and their thermoelectric properties are still low. Herein, we develop an ultrafast and cost-effective hot-pressing method to fabricate a novel carbon-based hybrid film, which consists of ionic liquid/phenolic resin/carbon fiber/expanded graphite. This method only costs no more than 15 min. We found that the expanded graphite as the major component enables high flexibility and the introduction of phenolic resin and carbon fiber enhances the shear resistance and toughness of the film, while the ion-induced carrier migration contributes to a high power factor of 38.7 µW m-1 K-2 at 500 K in the carbon-based hybrid film. After the comparison based on the ratios between the power factor with fabrication time and cost among the current conventional carbon-based thermoelectric composites, our hybrid films show the best cost-effective property. Besides, a flexible thermoelectric device, assembled by the as-designed hybrid films, shows a maximum output power density of 79.3 nW cm-2 at a temperature difference of 20 K. This work paves a new way to fabricate cost-effective and high-performance carbon-based thermoelectric hybrids with promising application potential.

A novel nomogram integrated with PDL1 and CEA to predict the prognosis of patients with gastric cancer.

INTRODUCTION: This study aimed to develop a prognostic nomogram for patients with gastric cancer (GC) based on the levels of programmed death 1 ligand 1 (PDL1) and carcinoembryonic antigen (CEA). METHODS: The nomogram was developed using data from a primary cohort of 247 patients who had been clinicopathologically diagnosed with GC, as well as a validation cohort of 63 patients. Furthermore, the nomogram divided the patients into three different risk groups for overall survival (OS)-the low-risk, middle-risk, and high-risk groups. Univariate and multivariate Cox hazard analyses were used to determine all of the factors included in the model. Decision curve analysis and receiver operating characteristic (ROC) curves were used to assess the accuracy of the nomogram. RESULTS: The Kaplan-Meier survival analysis revealed that metastasis stage, clinical stage, and CEA and PDL1 levels were predictors for progress-free survival (PFS) and OS of patients with GC. Metastasis stage, clinical stage, and CEA and PDL1 levels were found to be independent risk factors for the PFS and OS of patients with GC in a multivariate analysis, and the nomogram was based on these factors. The concordance index of the nomogram was 0.763 [95% confidence interval (CI) 0.740-0.787]. The area under the concentration-time curve of the nomogram model was 0.81 (95% CI 0.780-0.900). According to the decision curve analysis and ROC curves, the nomogram model had a higher overall net efficiency in forecasting OS than clinical stage, CEA and PDL1 levels. CONCLUSION: In conclusion, we proposed a novel nomogram that integrated PDL1 and CEA, and the proposed nomogram provided more accurate and useful prognostic predictions for patients with GC.