Glenoid Structural Bone Grafting in Reverse Total Shoulder Arthroplasty: Clinical and Radiographic Outcomes.

INTRODUCTION: Current options for reconstruction of large glenoid defects in reverse total shoulder arthroplasty (RTSA) include structural bone grafting, utilization of augmented components, or 3D printed custom implants. Given the paucity in the literature on structural bone grafts in RTSA, this study reflects our experience on clinical and radiographic outcomes of structural bone grafts utilized for glenoid defects in RTSA. METHODS: We identified 33 consecutive patients who underwent RTSA utilizing structural bone grafts for glenoid bone loss between 2008 and 2019. Twenty-six patients with mean clinical follow-up of 4.4 ± 3.9 years and mean radiographic follow-up of 2.7 ± 3.2 years were included. Patient demographic data, peri-operative functional outcomes, radiographic outcomes, complications, and re-operation rates were determined. RESULTS: Between 2008 and 2019, 26 RTSAs were performed utilizing structural autograft or allograft for glenoid defects. There were 20 females (77%) and 6 males (23%), with mean presenting age of 68 years (range 41-86), mean BMI of 29 (range 21-44) and mean Charlson Comorbidity Index of 3 (range 0-8). There were 19 cases of central glenoid defects, and 7 were combined central and peripheral defects. Structural grafts included humeral head autograft (7), proximal humerus autograft (7), iliac crest autograft (7), distal clavicle autograft (2), and femoral head allograft (3). All eighteen revision RTSA cases had simultaneous humeral-sided revision. There was significant postoperative improvement in ASES scores (27.0 ± 12.6 preop vs. 59.8 ± 24.1 postop; p<0.001) and VAS scores (8.1 ± 3.6 preop vs. 3.0 ± 3.2 postop; p<0.001). Range of motion improved significantly for active forward elevation (63 ± 36º preop vs. 104 ± 36º postop; p<0.001) and external rotation (21 ± 20º preop vs. 32 ± 23º postop, p=0.036). Eighty-eight percent (23/26) of cases had successful reconstruction of the glenoid, defined as no visible radiolucent lines nor glenoid component migration at final follow-up. Re-operation rate was 19% (5/26) Postoperative complications included 2 cases of acromial stress fractures that were treated non-operatively, for a total complication rate (including re-operation) of 27% (7/26 cases). CONCLUSIONS: The use of structural bone autografts and allografts in RTSA was associated with improved outcome scores and range of motion. A reoperation rate of 19% and total complication rate of 27% were reported for these challenging cases. However, 86% of these complications were not related to structural glenoid reconstruction failure. Structural grafts are a reasonable option for glenoid reconstruction in RTSA cases with glenoid bone loss.

High accuracy of intra-articular needle position during anterior landmark guided glenohumeral injections.

OBJECTIVES: Image-guided ultrasound or fluoroscopic glenohumeral injections have high accuracy rates but require training, equipment, cost, and radiation exposure (fluoroscopy). In contrast, landmark-guided glenohumeral injections do not require additional subspecialist referrals or equipment. An optimal technique would be safe and accurate and have few barriers to implementation. The purpose of this study was to define the accuracy of glenohumeral needle placement via an anterior landmark-guided approach as assessed by direct arthroscopic visualization. METHODS: A consecutive series of adult patients undergoing shoulder arthroscopy in the beach chair position were included in this study. Demographic and procedural data were collected. The time required to perform the injection, the precise location of the needle tip, and factors that affected the accuracy of the injection were also assessed. RESULTS: A standardized anterior landmark-guided glenohumeral joint injection was performed in the operating room prior to surgery, and the location of the needle tip was documented by arthroscopic visualization with a low complication profile and few barriers to implementation. A total of 81 patients were enrolled. Successful intra-articular glenohumeral needle placement by sports medicine and shoulder/elbow fellowship-trained orthopedic surgeons was confirmed in 93.8% (76/81) of patients. The average time to complete the procedure was 24.8 â€‹s. There were no patient-related variables associated with nonintra-articular injections in the cohort. CONCLUSIONS: This study demonstrated that the technique of anterior landmark-guided glenohumeral injection has an accuracy of 93.8% and requires less than 30 â€‹s to perform. This method is safe, yields similar accuracy to image-guided procedures, has improved cost and time efficiency, and requires less radiation exposure. No patient-related factors were associated with inaccurate needle placement. Anterior landmark-guided glenohumeral injections may be utilized with confidence by providers in the clinical setting. LEVEL OF EVIDENCE: Level 5. IRB: Approved under Stanford IRB-56323.

Optimizing Tissue Engineering for Clinical Relevance in Rotator Cuff Repair.

Rotator cuff tear (RCT) is the most common cause of disability in the upper extremity. It results in 4.5 million physician visits in the United States every year and is the most common etiology of shoulder conditions evaluated by orthopedic surgeons. Over 460,000 RCT repair surgeries are performed in the United States annually. Rotator cuff (RC) retear and failure to heal remain significant postoperative complications. Literature suggests that the retear rates can range from 29.5% to as high as 94%. Weakened and irregular enthesis regeneration is a crucial factor in postsurgical failure. Although commercially available RC repair grafts have been introduced to augment RC enthesis repair, they have been associated with mixed clinical outcomes. These grafts lack appropriate biological cues such as stem cells and signaling molecules at the bone-tendon interface. In addition, they do little to prevent fibrovascular scar tissue formation, which causes the RC to be susceptible to retear. Advances in tissue engineering have demonstrated that mesenchymal stem cells (MSCs) and growth factors (GFs) enhance RC enthesis regeneration in animal models. These models show that delivering MSCs and GFs to the site of RCT enhances native enthesis repair and leads to greater mechanical strength. In addition, these models demonstrate that MSCs and GFs may be delivered through a variety of methods including direct injection, saturation of repair materials, and loaded microspheres. Grafts that incorporate MSCs and GFs enhance anti-inflammation, osteogenesis, angiogenesis, and chondrogenesis in the RC repair process. It is crucial that the techniques that have shown success in animal models are incorporated into the clinical setting. A gap currently exists between the promising biological factors that have been investigated in animal models and the RC repair grafts that can be used in the clinical setting. Future RC repair grafts must allow for stable implantation and fixation, be compatible with current arthroscopic techniques, and have the capability to deliver MSCs and/or GFs.

Host and microbial characteristics associated with recurrent prosthetic joint infections.

Approximately 20% of patients after resection arthroplasty and antibiotic spacer placement for prosthetic joint infection develop repeat infections, requiring an additional antibiotic spacer before definitive reimplantation. The host and bacterial characteristics associated with the development of recurrent infection is poorly understood. A case-control study was conducted for 106 patients with intention to treat by two-stage revision arthroplasty for prosthetic joint infection at a single institution between 2009 and 2020. Infection was defined according to the 2018 Musculoskeletal Infection Society criteria. Thirty-nine cases ("recurrent-periprosthetic joint infection [PJI]") received at least two antibiotic spacers before clinical resolution of their infection, and 67 controls ("single-PJI") received a single antibiotic cement spacer before infection-free prosthesis reimplantation. Patient demographics, McPherson host grade, and culture results including antibiotic susceptibilities were compared. Fifty-two (78%) single-PJI and 32 (82%) recurrent-PJI patients had positive intraoperative cultures at the time of their initial spacer procedure. The odds of polymicrobial infections were 11-fold higher among recurrent-PJI patients, and the odds of significant systemic compromise (McPherson host-grade C) were more than double. Recurrent-PJI patients were significantly more likely to harbor Staphylococcus aureus. We found no differences between cases and controls in pathogen resistance to the six most tested antibiotics. Among recurrent-PJI patients, erythromycin-resistant infections were more prevalent at the final than initial spacer, despite no erythromycin exposure. Our findings suggest that McPherson host grade, polymicrobial infection, and S. aureus infection are key indicators of secondary or persistent joint infection following resection arthroplasty and antibiotic spacer placement, while bacterial resistance does not predict infection-related arthroplasty failure.

No significant difference in risk of prolonged opioid use following outpatient versus inpatient total shoulder arthroplasty: A propensity matched analysis.

Background: The purpose of this investigation was to compare rates of filled opioid prescriptions and prolonged opioid use in opioid naïve patients undergoing total shoulder arthroplasty (TSA) in inpatient versus outpatient settings. Methods: A retrospective cohort study was conducted using a national insurance claims database. Inpatient and outpatient cohorts were created by identifying continuously enrolled, opioid naïve TSA patients. A greedy nearest-neighbor algorithm was used to match baseline demographic characteristics between cohorts with a 1:1 inpatient to outpatient ratio to compare the primary outcomes of filled opioid prescriptions and prolonged opioid use following surgery between cohorts. Results: A total of 11,703 opioid naïve patients (mean age 72.5 ± 8.5 years, 54.5% female, 87.6% inpatient) were included for analysis. After propensity score matching (n = 1447 inpatients; n = 1447 outpatients), outpatient TSA patients were significantly more likely to fill an opioid prescription in the perioperative window compared to inpatients (82.9% versus 71.5%, p < 0.001). No significant differences in prolonged opioid use were detected (5.74% inpatient versus 6.77% outpatient; p = 0.25). Conclusions: Outpatient TSA patients were more likely to fill opioid prescriptions compared to inpatient TSA patients. The quantity of opioids prescribed and rates of prolonged opioid use were similar between the cohorts. Level of evidence: Therapeutic Level III.

Growth and differentiation factor-7 immobilized, mechanically strong quadrol-hexamethylene diisocyanate-methacrylic anhydride polyurethane polymer for tendon repair and regeneration.

Biological and mechanical cues are both vital for biomaterial aided tendon repair and regeneration. Here, we fabricated mechanically tendon-like (0 s UV) QHM polyurethane scaffolds (Q: Quadrol, H: Hexamethylene diisocyanate; M: Methacrylic anhydride) and immobilized them with Growth and differentiation factor-7 (GDF-7) to produce mechanically strong and tenogenic scaffolds. In this study, we assessed QHM polymer cytocompatibility, amenability to fibrin-coating, immobilization and persistence of GDF-7, and capability to support GDF-7-mediated tendon differentiation in vitro as well as in vivo in mouse subcutaneous and acute rat rotator cuff tendon resection models. Cytocompatibility studies showed that QHM facilitated cell attachment, proliferation, and viability. Fibrin-coating and GDF-7 retention studies showed that mechanically tendon-like 0 s UV QHM polymer could be immobilized with GDF-7 and retained the growth factor (GF) for at least 1-week ex vivo. In vitro differentiation studies showed that GDF-7 mediated bone marrow-derived human mesenchymal stem cell (hMSC) tendon-like differentiation on 0 s UV QHM. Subcutaneous implantation of GDF-7-immobilized, fibrin-coated, QHM polymer in mice for 2 weeks demonstrated de novo formation of tendon-like tissue while implantation of GDF-7-immobilized, fibrin-coated, QHM polymer in a rat acute rotator cuff resection injury model indicated tendon-like tissue formation in situ and the absence of heterotopic ossification. Together, our work demonstrates a promising synthetic scaffold with human tendon-like biomechanical attributes as well as immobilized tenogenic GDF-7 for tendon repair and regeneration. STATEMENT OF SIGNIFICANCE: Biological activity and mechanical robustness are key features required for tendon-promoting biomaterials. While synthetic biomaterials can be mechanically robust, they often lack bioactivity. To biologically augment synthetic biomaterials, numerous drug and GF delivery strategies exist but the large tissue space within the shoulder is constantly flushed with saline during arthroscopic surgery, hindering efficacious controlled release of therapeutic molecules. Here, we coated QHM polymer (which exhibits human tendon-to-bone-like biomechanical attributes) with fibrin for GF binding. Unlike conventional drug delivery strategies, our approach utilizes immobilized GFs as opposed to released GFs for sustained, localized tissue regeneration. Our data demonstrated that GF immobilization can be broadly applied to synthetic biomaterials for enhancing bioactivity, and GDF-7-immobilized QHM exhibit high clinical translational potential for tendon repair.

Limited Biomechanical Evidence Behind Single Row Versus Double Row Repair of Subscapularis Tears: A Systematic Review.

Purpose: To systematically review the literature for studies investigating the biomechanical properties of constructs used to repair isolated subscapularis tears in time zero human cadaveric studies. Methods: A systematic review was performed using Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Three electronic databases were searched for studies that reported on the construct technique and biomechanical outcomes for the repair of isolated subscapularis tears in human cadaveric specimens. Ultimate load, gap formation, stiffness, and failure mode were documented. Methodological quality was assessed using the Quality Appraisal for Cadaveric Studies (QUACS) scale. Results: Six articles qualified (104 shoulders [72 single-row, 26 double-row, 6 transosseous]; mean QUACS score 10.5 ± 1) and were analyzed. Studies varied in the number and type of anchors and construct technique (1-2 anchors single-row; 3-4 anchors double-row; bioabsorbable or titanium anchors) and suture(s) used (no. 2 FiberWire or FiberTape), subscapularis tear type (25%, 33%, 50%, or 100% tear), and whether a knotless or knotted fixation was used. In studies that created full-thickness, upper subscapularis tears (Fox-Romeo II/III or Lafosse II), no significant differences were seen in ultimate load, gap formation, and stiffness for knotted versus knotless single-row repair (2 studies) and single-row versus double-row repair (1 study). Double-row repair of complete subscapularis tears demonstrated higher ultimate load, stiffness, and lower gap formation in 1 study. Ultimate load differed between the studies and constructs (single-row: range, 244 N to 678 N; double-row: range 332 N to 508 N, transosseous: 453 N). Suture cutout was the most common mode of failure (59%). Conclusion: Because of the limited number of studies and varying study designs in examining the biomechanical properties of repair constructs used for subscapularis tears, there is inconclusive evidence to determine which construct type is superior for repairing subscapularis tears. Clinical Relevance: Results from biomechanical studies of clinically relevant subscapularis repair constructs are important to guide decision-making for choosing the optimal construct for patients with subscapularis tears.

Continuous interscalene versus phrenic nerve-sparing high-thoracic erector spinae plane block for total shoulder arthroplasty: a randomized controlled trial.

PURPOSE: The high-thoracic erector spinae plane block (HT-ESPB) has been reported as an effective analgesic modality for the shoulder region without phrenic nerve palsy. The goal of this study was to compare the HT-ESPB as a phrenic nerve-sparing alternative to an interscalene block for total shoulder arthroplasty. METHODS: Thirty patients undergoing total shoulder arthroplasty at Stanford Health Care (Palo Alto, CA, USA) were enrolled in a double-blind randomized controlled trial. We randomized 28 patients to receive either an interscalene or HT-ESPB perineural catheter preoperatively; 26 patients were included in the final analysis. The study was powered for the primary outcome of incidence of hemidiaphragmatic paralysis in the postanesthesia care unit (PACU). Other outcome measures included incentive spirometry volume, brachial plexus motor and sensory exams, adverse events, pain scores, and opioid consumption. RESULTS: The incidence of hemidiaphragmatic paralysis in the HT-ESPB catheter group was significantly lower than in the interscalene catheter group (0/12, 0% vs 14/14, 100%; P < 0.001). No statistically significant differences were found in pain scores and opioid consumption (in oral morphine equivalents) between the interscalene and HT-ESPB groups through postoperative day (POD) 2. Nevertheless, the mean (standard deviation) point estimates for opioid consumption for the HT-ESPB group were higher than for the interscalene group in the PACU (HT-ESPB: 24.8 [26.7] mg; interscalene: 10.7 [21.7] mg) and for POD 0 (HT-ESPB: 20.5 [25.0] mg; interscalene: 6.7 [12.0] mg). In addition, cumulative postoperative opioid consumption was significantly higher at POD 0 (PACU through POD 0) in the HT-ESPB group (45.3 [39.9] mg) than in the interscalene group (16.6 [21.9] mg; P = 0.04). CONCLUSIONS: This study suggests that continuous HT-ESPB can be a phrenic nerve-sparing alternative to continuous interscalene brachial plexus blockade, although the latter provided superior opioid-sparing in the immediate postoperative period. This was a small sample size study, and further investigations powered to detect differences in analgesic and quality of recovery score endpoints are needed. STUDY REGISTRATION: www. CLINICALTRIALS: gov (NCT03807505); registered 17 January 2019.

RéSUMé: OBJECTIF: Le bloc des muscles érecteurs du rachis du haut thorax (BMER-HT) a été rapporté comme une modalité analgésique efficace pour la région de l'épaule et ce, sans paralysie du nerf phrénique. L'objectif de cette étude était de comparer ce bloc en tant qu'alternative épargnant le nerf phrénique à un bloc interscalénique pour l'arthroplastie totale de l'épaule. MéTHODE: Trente patients bénéficiant d'une arthroplastie totale de l'épaule au centre de soins Stanford Health Care (Palo Alto, CA, États-Unis) ont été recrutés dans une étude randomisée contrôlée à double insu. Nous avons randomisé 28 patients à recevoir un cathéter périneural interscalénique ou un BMER-HT en préopératoire; 26 patients ont été inclus dans l'analyse finale. Le calcul de puissance de l'étude a été effectué pour répondre au critère d'évaluation principal, qui était l'incidence de paralysie hémidiaphragmatique en salle de réveil. Les autres issues mesurées comprenaient les volumes de spirométrie, les examens moteurs et sensoriels du plexus brachial, les événements indésirables, les scores de douleur et la consommation d'opioïdes. RéSULTATS: L'incidence de paralysie hémidiaphragmatique dans le groupe cathéter BMER-HT était significativement plus faible que dans le groupe cathéter interscalénique (0/12, 0 % vs 14/14, 100 %; P < 0,001). Aucune différence statistiquement significative n'a été observée dans les scores de douleur et la consommation d'opioïdes (en équivalents morphine par voie orale) entre les groupes interscalénique et BMER-HT jusqu'au jour postopératoire (JPO) 2. Néanmoins, en salle de réveil, les estimations ponctuelles moyennes (écart type) de la consommation d'opioïdes pour le groupe BMER-HT étaient plus élevées que pour le groupe interscalénique (BMER-HT : 24,8 [26,7] mg; interscalénique : 10,7 [21,7] mg), ainsi qu'au JPO 0 (BMER-HT : 20,5 [25,0] mg; interscalénique: 6,7 [12,0] mg). De plus, la consommation cumulative d'opioïdes postopératoires était significativement plus élevée au JPO 0 (salle de réveil jusqu'au JPO 0) dans le groupe BMER-HT (45,3 [39,9] mg) que dans le groupe interscalénique (16,6 [21,9] mg; P = 0,04). CONCLUSION: Cette étude suggère que le BMER-HT continu peut être une alternative au bloc interscalénique continu du plexus brachial pour épargner le nerf phrénique, bien que le bloc interscalénique ait fourni une épargne d'opioïdes supérieure en période postopératoire immédiate. Il s'agissait d'une étude de petite taille d'échantillon, et d'autres études visant à détecter les différences dans les scores des critères d'évaluation en matière d'analgésie et de qualité de la récupération sont nécessaires. ENREGISTREMENT DE L'éTUDE: www.clinicaltrials.gov (NCT03807505); enregistrée le 17 janvier 2019.

Arthroscopic Single and Double Row Repair of Isolated and Combined Subscapularis Tears Result in Similar Improvements in Outcomes: A Systematic Review.

PURPOSE: To systematically review the literature to (1) describe arthroscopic subscapularis repair constructs and outcomes in patients with isolated and combined subscapularis tears and (2) compare outcomes after single- and double-row subscapularis repair in both of these settings. METHODS: A systematic review was performed using PRISMA guidelines. PubMed, SCOPUS, and Cochrane Central Register of Controlled Trials were searched for Level I-IV evidence studies that investigated outcomes after arthroscopic subscapularis repair for the treatment of isolated subscapularis tears or subscapularis tears combined with posterosuperior rotator cuff tears in adult human patients. Data recorded included study demographics, repair construct, shoulder-specific outcome measures, and subscapularis retears. Study methodological quality was analyzed using the MINORS score. Heterogeneity and low levels of evidence precluded meta-analysis. RESULTS: The initial search yielded 811 articles (318 duplicates, 493 screened, 67 full-text review). Forty-three articles (2406 shoulders, 57% males, mean age range 42 to 67.5 years, mean MINORS score 13.4 ± 4.1) were included and analyzed. Articles reported on patients with isolated subscapularis tears (n = 15), combined tears (n = 17), or both (n = 11). The majority of subscapularis repairs used single-row constructs (89.4% of isolated tears, 88.9% of combined tears). All except for one study reporting on outcome measures found clinically significant improvements after subscapularis repair, and no clinically significant differences were detected in 5 studies comparing isolated to combined tears. Subscapularis retear rates ranged from 0% to 17% for isolated tears and 0% to 32% for combined subscapularis and posterosuperior rotator cuff tears. Outcomes and retear rates were similar in studies comparing single-row to double-row repair for isolated and combined subscapularis tears (P > .05 for all). CONCLUSION: Arthroscopic subscapularis repair resulted in significant improvements across all outcome measures, regardless of whether tears were isolated or combined or if repairs were single or double row. LEVEL OF EVIDENCE: Level IV, systematic review of Level II-IV studies.

Outcomes after resection arthroplasty versus permanent antibiotic spacer for salvage treatment of shoulder periprosthetic joint infections: a systematic review and meta-analysis.

BACKGROUND: Although revision to new components is favored after shoulder periprosthetic joint infections (PJIs), implant exchange is not always feasible. In certain cases, definitive treatment may be retainment of an antibiotic spacer or resection arthroplasty. The purpose of this investigation was to systematically review the literature for studies reporting on outcomes after resection arthroplasty or permanent antibiotic spacer for salvage treatment of shoulder PJIs. METHODS: A systematic review was performed using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. PubMed, SCOPUS, and Cochrane Central Register of Controlled Trials were searched for Level I-IV studies that reported on the final treatment of periprosthetic shoulder infections using resection arthroplasty or a permanent antibiotic spacer. Data recorded included study demographics, causative infectious organism, shoulder-specific range of motion and outcome measures, and infection eradication rate. Study methodological quality was analyzed using the Methodological Index for Non-Randomized Studies score. Forest plots of proportions and meta-analyses of single means were generated for infection eradication rates and outcomes, respectively. Heterogeneity was quantified using the I2 statistic. A P value of .05 was set as significant. RESULTS: The initial search yielded 635 articles (211 duplicates, 424 screened, 57 full-text review). Twenty-three articles (126 resection arthroplasty and 177 retained antibiotic spacer patients, 51% females, mean age range 37-78.5 years, mean Methodological Index for Non-Randomized Studies score 9.6 ± 0.7) were included and analyzed. The pooled infection eradication rate was 82% (72%-89%) after resection arthroplasty and 85% (79%-90%) after permanent antibiotic spacer. The pooled mean forward flexion (71.5° vs. 48.7°; P < .001) and mean American Shoulder and Elbow Surgeons score (53.5 vs. 31.0; P < .001) were significantly higher for patients treated with a permanent antibiotic spacer compared with resection arthroplasty. No significant differences were found for mean external rotation (13.5° vs. 20.5°; P = .07), abduction (58.2° vs. 50.3°; P = .27), or visual analog scale pain (3.7 vs. 3.4; P = .24) between groups. There was a statistically significant, but not clinically significant, difference in mean Constant score between permanent antibiotic spacer and resection arthroplasty patients (33.6 vs. 30.0; P < .001). CONCLUSION: When implant exchange after shoulder PJI is not feasible, permanent antibiotic spacers and resection arthroplasty are both salvage procedures that provide similar rates of infection eradication. Although both can decrease pain levels, the permanent antibiotic spacer may result in better functional outcomes compared with resection arthroplasty.

Pain management in shoulder arthroplasty: a systematic review and network meta-analysis of randomized controlled trials.

BACKGROUND: Postoperative pain management after total shoulder arthroplasty (TSA) can be challenging. Given the variety of pain management options available, the purpose of this investigation was to systematically review the literature for randomized controlled trials reporting on pain control after shoulder arthroplasty. We sought to determine which modalities are most effective in managing postoperative pain and reducing postoperative opioid use. METHODS: A systematic review was performed using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-analyses) guidelines. PubMed, Scopus, and the Cochrane Central Register of Controlled Trials were searched for Level I-II randomized controlled trials that compared interventions for postoperative pain control after TSA. Pain control measures included nerve blocks and nerve block adjuncts, local injections, patient-controlled analgesia, oral medications, and other modalities. The 2 primary outcome measures were pain level measured on a 0-10 visual analog scale and opioid use. The risk of study bias and methodologic quality were analyzed using The Cochrane Collaboration's Risk of Bias 2 (RoB 2) tool. Network meta-analyses were performed for visual analog scale pain scores at postsurgical time points and opioid use using a frequentist approach and random-effects model, with heterogeneity quantified using the I2 statistic. Treatments were ranked using the P score, and statistical significance was set at P < .05. RESULTS: The initial search yielded 2391 articles (695 duplicates, 1696 screened, 53 undergoing full-text review). Eighteen articles (1358 shoulders; 51% female patients; mean age range, 65-73.7 years; 4 studies with low risk of bias, 12 with some risk, and 2 with high risk) were included and analyzed. At 4 and 8 hours postoperatively, patients receiving local liposomal bupivacaine (LB) injection (P < .001 for 4 and 8 hours) or local ropivacaine injection (P < .001 for 4 hours and P = .019 for 8 hours) had significantly more pain compared with patients who received either a continuous interscalene block (cISB) or single-shot interscalene block (ssISB). No differences in opioid use (at P < .05) were detected between modalities. The P scores of treatments demonstrated that ssISBs were most favorable at time points < 24 hours, whereas pain at 24 and 48 hours after surgery was best managed with cISBs or a combination of an ssISB with a local LB injection. CONCLUSION: Interscalene blocks are superior to local injections alone at managing pain after TSA. Single-shot interscalene blocks are optimal for reducing early postoperative pain (< 24 hours), whereas pain at 24-48 hours after surgery may be best managed with cISBs or a combination of an ssISB with a local LB injection.

Clinical effect of normal saline injectate into interscalene nerve block catheters given within one hour of local anesthetic bolus on analgesia and hemidiaphragmatic paralysis.

BACKGROUND: Previous case reports describe the reversal of phrenic nerve blockade from the interscalene nerve block using normal saline injectate washout. This randomized clinical trial aimed to evaluate whether using normal saline injectate to wash out local anesthetic from an interscalene nerve block catheter would restore phrenic nerve and diaphragm function, while preserving analgesia. METHODS: Institutional review board approval, clinical trial registration and consent were obtained for patients undergoing shoulder surgery with an interscalene nerve block catheter. 16 patients were randomized to receive three 10 mL aliquots of normal saline injectate (intervention group, n=8) or three sham injectates (control group, n=8) via their perineural catheters in the postanesthesia care unit (PACU). Primary outcome measures were the effects on ipsilateral hemidiaphragmatic paralysis, and secondary outcome measures included PACU opioid consumption, pain scores and change in brachial plexus sensory examination and motor function. RESULTS: There was no significant difference in reversal of hemidiaphragmatic paralysis. However, there was a greater number of patients in the intervention group who ultimately displayed partial, as opposed to full, paralysis of the hemidiaphragm (p=0.03). There was no significant difference in pain scores, PACU opioid requirement, and brachial plexus motor and sensory examinations between the two groups. CONCLUSIONS: All patients had persistent hemidiaphragmatic paralysis after the intervention, but fewer patients in the intervention group progressed to full paralysis, suggesting that a larger bolus dose of normal saline may be needed to completely reverse hemidiaphragmatic paralysis. Although normal saline injectate in 10mL increments given through the interscalene nerve block catheter had no clinically significant effect on reversing phrenic nerve blockade, it also did not lead to a reduction in analgesia and may be protective in preventing the progression to full hemidiaphragmatic paralysis. TRAIL REGISTRATION NUMBER: NCT03677778.

Intersurgeon and intrasurgeon variability in preoperative planning of anatomic total shoulder arthroplasty: a quantitative comparison of 49 cases planned by 9 surgeons.

BACKGROUND: Preoperative planning software is widely available for most anatomic total shoulder arthroplasty (ATSA) systems. It can be most useful in determining implant selection and placement with advanced glenoid wear. The purpose of this study was to quantify inter- and intrasurgeon variability in preoperative planning of a series of ATSA cases. METHODS: Forty-nine computed tomography scans were planned for ATSA by 9 fellowship-trained shoulder surgeons using the ExactechGPS platform (Exactech Inc., Gainesville, FL, USA). Each case was planned a second time between 4 and 12 weeks later. Variability within and between surgeons was measured for implant type, size, version and inclination correction, and implant face position. Interclass correlation coefficients, Pearson, and Light's kappa coefficients were used for statistical analysis. RESULTS: There was considerable variation in the frequency of augment use between surgeons and between rounds for the same surgeon. Thresholds for augment use also varied between surgeons. Interclass correlation coefficients for intersurgeon variability were 0.37 for version, 0.80 for inclination, 0.36 for implant type, and 0.36 for implant size. Pearson coefficients for intrasurgeon variability were 0.17 for version and 0.53 for inclination. Light's kappa coefficient for implant type was 0.64. CONCLUSIONS: This study demonstrates substantial inter- and intrasurgeon variability in preoperative planning of ATSA. Although the magnitude of differences in correction was small, surgeons differed significantly in the use of augments to achieve the resultant plan. Surgeons differed from each other on thresholds for augment use and maximum allowable residual retroversion. This suggests that there may a range of acceptable corrections for each shoulder rather than a single optimal plan.

Assessment of surgeon variability in preoperative planning of reverse total shoulder arthroplasty: a quantitative comparison of 49 cases planned by 9 surgeons.

BACKGROUND: Preoperative planning software is gaining utility in reverse total shoulder arthroplasty (RTSA), particularly when addressing pathologic glenoid wear. The purpose of this study was to quantify inter- and intrasurgeon variability in preoperative planning a series of RTSA cases to identify differences in how surgeons consider optimal implant placement. This may help identify opportunities to establish consensus when correlating plan differences with clinical data. METHODS: A total of 49 computed tomography scans from actual RTSA cases were planned for RTSA by 9 fellowship-trained shoulder surgeons using the same platform (Exactech GPS, Exactech Inc., Gainesville, FL, USA). Each case was planned a second time 6-12 weeks later. Variability within and between surgeons was measured for implant selection, version correction, inclination correction, and implant face position. Interclass correlation coefficients, and Pearson and Light's kappa coefficient were used for statistical analysis. RESULTS: There was considerable variation in the frequency of augmented baseplate selection between surgeons and between rounds for the same surgeon. Thresholds for augment use also varied between surgeons. Interclass correlation coefficients for intersurgeon variability ranged from 0.43 for version, 0.42 for inclination, and 0.25 for baseplate type. Pearson coefficients for intrasurgeon variability were 0.34 for version and 0.30 for inclination. Light's kappa coefficient for baseplate type was 0.61. CONCLUSIONS: This study demonstrates substantial variability both between surgeons and between rounds for individual surgeons when planning RTSA. Although average differences between plans were relatively small, there were large differences in specific cases suggesting little consensus on optimal planning parameters and opportunities to establish guidelines based on glenoid pathoanatomy. The correlation of preoperative planning with clinical outcomes will help to establish such guidelines.

Clinical and radiographic comparison of a hybrid cage glenoid to a cemented polyethylene glenoid in anatomic total shoulder arthroplasty.

BACKGROUND: This study reports the clinical and radiographic outcomes of a hybrid cage glenoid compared with an age-matched, sex-matched, and follow-up-matched cohort of cemented all-polyethylene peg glenoids in patients undergoing anatomic total shoulder arthroplasty with 2 years' minimum follow-up. MATERIALS AND METHODS: We reviewed 632 primary anatomic total shoulder arthroplasty patients from an international multi-institutional database; 316 patients received hybrid cage glenoids and were matched for age, sex, and follow-up with 316 patients with cemented all-polyethylene peg glenoids. Each cohort received the same humeral component. Scoring was performed in all patients preoperatively and at latest follow-up using 5 outcome scoring metrics and 4 active range-of-motion measurements. A Student 2-tailed unpaired t test identified differences in outcomes; P < .05 denoted a significant difference. RESULTS: Cage glenoid patients had significantly lower rates of radiolucent glenoid lines (9.0% vs. 37.6%, P < .0001) and radiolucent humeral lines (3.0% vs. 9.1%, P = .0088) than all-polyethylene peg glenoid patients. In the cage glenoid cohort, 4 cases of aseptic glenoid loosening (1.3%) and 4 cases of articular surface dissociation (1.3%) occurred. In the all-polyethylene peg cohort, 12 cases of aseptic loosening (3.8%) occurred. Cage glenoid patients had a significantly lower revision rate than all-polyethylene peg glenoid patients (2.5% vs. 6.9%, P = .0088). CONCLUSION: At 50 months' mean follow-up, cage glenoids demonstrated equally good clinical outcomes to all-polyethylene peg glenoids. Cage glenoids had significantly fewer radiolucent lines around both the glenoid and humeral components and a lower revision rate. Longer-term follow-up is required to confirm these promising short-term results.

Impact of screw length and screw quantity on reverse total shoulder arthroplasty glenoid fixation for 2 different sizes of glenoid baseplates.

BACKGROUND: Little guidance exists regarding the minimum screw length and screw quantity necessary to achieve fixation in reverse total shoulder arthroplasty (rTSA); to that end, this study quantified the displacement of 2 different sizes of glenoid baseplates using multiple different screw lengths and quantities of screws in a low-density polyurethane bone-substitute model. METHODS: Testing of rTSA glenoid loosening was conducted according to ASTM F 2028-17. To independently evaluate the impact of screw quantity and screw length on rTSA glenoid fixation for 2 different sizes of glenoid baseplates, baseplates were constructed using 2 screws, 4 screws, or 6 screws (with the latter being used for the larger baseplate only) with 3 different poly-axial locking compression screw lengths. RESULTS: Both sizes of glenoid baseplates remained well fixed after cyclic loading regardless of screw length or screw quantity. Baseplates with 2 screws had significantly greater displacement than baseplates with 4 or 6 screws. No differences were observed between baseplates with 4 screws and those with 6 screws (used for the larger baseplate). Both sizes of baseplates with 18-mm screws had significantly greater displacement than baseplates with 30- or 46-mm screws. For larger baseplates, those with 30-mm screws had significantly greater displacement than those with 46-mm screws in the superior-inferior direction. DISCUSSION: For the 2 different sizes of baseplates tested in this study, rTSA glenoid fixation was impacted by both screw quantity and screw length. Irrespective of screw quantity, longer screws showed significantly better fixation. Irrespective of screw length, the use of more screws showed significantly better fixation, up to a point, as the use of more than 4 screws showed no incremental benefit. Finally, longer screws can be used as a substitute for additional fixation if it is not feasible to use more screws.

Elbow Trauma Sequelae: Instability, Stiffness, Non-arthroplasty, and Arthroplasty Options.

Sequelae of elbow trauma are complicated to manage. Undiagnosed instability patterns are important to recognize to get the elbow into concentric alignment for further reconstructive efforts. Stiffness is also common after elbow trauma. Surgeons should be familiar with the different approaches to the elbow to safely address stiffness. Non-arthroplasty and arthroplasty salvage options are also important to understand because the indications are expanding and outcomes for these procedures are being better understood.

Safety and Efficacy of Intraoperative Computer-Navigated Versus Non-Navigated Shoulder Arthroplasty at a Tertiary Referral.

Emerging technologies in shoulder arthroplasty, such as 3-dimensional planning software and real-time intraoperative navigation, are now available for surgeons to perform more accurate placement of the glenoid component without malposition or perforation. Using these tools, the surgeon can visualize the version, inclination, and containment of the implant and determine whether augmented components would be necessary. This review provides an updated investigation of the present literature to elucidate the role of computer navigation in modern shoulder arthroplasty.