Waste for Waste: Interface-Intensified Durable Superhydrophilic-Superoleophobic Collagen Fiber Membrane for Efficient Separation of Cationic Surfactant-Stabilized Oil-in-Water Emulsions.

Cationic surfactant-stabilized oil-in-water emulsions pose a significant challenge in separation due to the presence of surfactants. Herein, we develop a collagen-fiber-based CFM-PMDA-TiO2 membrane with unique infiltration properties capable of efficiently separating cationic surfactant-stabilized oil-in-water emulsions by exploiting the charge-demulsification effect. The membrane exhibits superhydrophilic and submerged superoleophobic properties, making it highly suitable for separating a wide range of commercially available cationic surfactant-stabilized oil-in-water microemulsions and nanoemulsions, which demonstrates an exceptional separation efficiency as high as 99.86% and an impressive flux of up to 1436.40 L m-2 h-1. Furthermore, even after a strong subjecting of the membrane to sandpaper abrasion and a full 15 time use, the separation efficacy of oil-in-water emulsions is retained, highlighting the durability, reusability, and economic viability. We propose that these features are enabled by the electrostatic interactions triggered from pyromellitic dianhydride (PMDA) and superhydrophilic-superoleophobic membrane intensified by the TiO2 on the unique collagen fiber membrane. Outcomes emphasize the versatility and potential of our membrane in addressing emulsified oily wastewater hurdles.

A biomass fiber adsorbent grafted with phosphate/amidoxime for efficient extraction of uranium from seawater by synergistic effect.

There are approximately 4 billion tons of uranium in the ocean, which is unmatched by the surface. Nevertheless, it's very challenging to extract uranium from the ocean due to the exceedingly low concentration of uranium in the ocean (about 3.3 µg L-1) as well as high salinity level. Current methods are often limited by selectivity, sustainability, economics, etc. Herein, phosphoric acid group and amidoxime group were grafted to skin collagen fibers through " initiated access" to design a new uranium extraction material, abbreviated as CGPA. Through laboratory simulation experiments, it is concluded that the maximum adsorption capacity of CGPA for uranium reaches 263.86 mg g-1. It has high adsorption, selectivity, and reusability for uranium. In the actual seawater extraction experiment, CGPA obtained 29.64 µg of uranium after extracting 10.0 L of seawater, and the extraction rate was 90.1%. The adsorbent has excellent effects in kinetics, selectivity, extraction capacity, renewability, etc. In the extraction of uranium from seawater, and is an economically feasible and industrially expandable adsorbent.

Effectively remove p-arsanilic acid from water over amphiphilic amino modified collagen fiber.

Efficient and rapid removal of p-arsanilic acid (p-ASA) in water is very important in environmental protection and human health, however it is still a severe challenge in actual engineering. Herein, a novel sorbent (CF-PEI) was successfully fabricated by simply modifying the amphiphilic skin collagen fiber (CF) substrate with Polyethylenimine (PEI). The as-prepared CF-PEI exhibits high-efficiency adsorption for negatively charged p-ASA with aromatic rings due to the introduction of amino groups and the existence of hydrophobic bands, and the maximum adsorption capacity of CF-PEI for p-ASA was high up to 285.71 mg g-1. In addition, the adsorption mechanism of CF-PEI on p-ASA mainly includes electrostatic interaction, hydrogen bond and amphiphilicity. The multi-level all-fiber structure of CF makes it mainly focus on surface mass transfer with short mass transfer distance, and its capillary drainage effect can realize large flow and rapid separation. CF-PEI based on CF can realize the ability to separate low-concentration p-ASA with high flow rate and high efficiency. The effective processing volume was 12.5 L g-1 when the separation flux reached as high as 9931.27 L m-2 h-1. Notably, the p-ASA adsorbed on CF-PEI was almost completely eluted by NaOH (0.5 mol L-1). The adsorbent is convenient to prepare, recyclable, high in efficiency, and has a great application prospect in removing organic micro-pollutants.

Multilayer Structure Ammoniated Collagen Fibers for Fast Adsorption of Anionic Dyes.

Dye wastewater has become one of the difficult industrial wastewaters due to its significant characteristics such as high chroma and poor biodegradability. Here, we use collagen fibers (CFs) as the matrix, glutaraldehyde as the cross-linking agent, and polyethyleneimine (PEI) as the ammoniating modifier to prepare cationic-modified collagen fibers (CF-PEI). The CF-PEI still maintained the original fibrous structure with a larger adsorption area. The content of primary amino groups on CF-PEI was significantly increased, which not only improved the hydrophilic swelling performance of CFs but also improved the adsorption capacity. The adsorption capacity of CF-PEI for soap yellow and acid red could reach 538.2 and 369.7 mg g-1, respectively. The adsorption rate was fast, and the adsorption equilibrium could be reached in about 60 min. Desorption regeneration studies have shown that 0.1 mol L-1 HCl could achieve a better desorption effect, and the CF-PEI had a good recycling performance. The ammoniated modified CF-PEI was an excellent adsorption treatment material for anionic dye wastewater. It is expected to become an effective way for high-value resource utilization of waste dander in the leather industry.