RESUMEN
In this review, we present a short overview of the development of sol-gel glasses for application in the field of photonics, with a focus on some of the most interesting results obtained by our group and collaborators in that area. Our main attention is devoted to silicate glasses of different compositions, which are characterized by specific optical and spectroscopic properties for various applications, ranging from luminescent systems to light-confining structures and memristors. In particular, the roles of rare-earth doping, matrix composition, the densification process and the fabrication protocol on the structural, optical and spectroscopic properties of the developed photonic systems are discussed through appropriate examples. Some achievements in the fabrication of oxide sol-gel optical waveguides and of micro- and nanostructures for the confinement of light are also briefly discussed.
RESUMEN
Oxyfluoride glass-ceramics (OxGCs) with the molar composition 80SiO2-20(1.5Eu3+: NaGdF4) were prepared with sol-gel following the "pre-crystallised nanoparticles route" with promising optical results. The preparation of 1.5 mol % Eu3+-doped NaGdF4 nanoparticles, named 1.5Eu3+: NaGdF4, was optimised and characterised using XRD, FTIR and HRTEM. The structural characterisation of 80SiO2-20(1.5Eu3+: NaGdF4) OxGCs prepared from these nanoparticles' suspension was performed by XRD and FTIR revealing the presence of hexagonal and orthorhombic NaGdF4 crystalline phases. The optical properties of both nanoparticles' phases and the related OxGCs were studied by measuring the emission and excitation spectra together with the lifetimes of the 5D0 state. The emission spectra obtained by exciting the Eu3+-O2- charge transfer band showed similar features in both cases corresponding the higher emission intensity to the 5D0â7F2 transition that indicates a non-centrosymmetric site for Eu3+ ions. Moreover, time-resolved fluorescence line-narrowed emission spectra were performed at a low temperature in OxGCs to obtain information about the site symmetry of Eu3+ in this matrix. The results show that this processing method is promising for preparing transparent OxGCs coatings for photonic applications.
RESUMEN
The unique properties of the Eu3+ ion make it a powerful spectroscopic tool to investigate structure or follow processes and mechanisms in several high-tech application areas such as biology and health, structural engineering, environment monitoring systems and quantum technology, mainly concerning photonics. The traditional method is to exploit the unique photoluminescent properties of Eu3+ ions to understand complex dynamical processes and obtain information useful to develop materials with specific characteristics. The objective of this review is to focus on the use of Eu3+ optical spectroscopy in some condensed matter issues. After a short presentation of the more significant properties of the Eu3+ ion, some examples regarding its use as a probe of the local structure in sol-gel systems are presented. Another section is devoted to dynamical processes such as the important technological role of nanocrystals as rare-earth sensitizers. The appealing effect of the site-selection memory, observed when exciting different sites into the 5D1 state, which the 5D0 â 7F0 emission band reflects following the sites' distribution, is also mentioned. Finally, a section is devoted to the use of Eu3+ in the development of a rare-earth-based platform for quantum technologies.
RESUMEN
Doped semiconductor nanocrystal-based thin films are widely used for many applications, such as screens, electrochromic windows, light emitting diodes, and solar cells. Herein, we have employed spectroscopic ellipsometry to measure and model the complex dielectric response of indium tin oxide films fabricated by nanocrystal deposition and sintering. The films could be modelled as Bruggemann effective media, allowing estimation of the nanoscale interstitial porosity of the structure. The effective dielectric constants show the possibility of tuning the plasma frequency and the epsilon-near zero condition of the film.
RESUMEN
Rare earth-activated 1-D photonic crystals were fabricated by RF-sputtering technique. The cavity is constituted by an Er3+-doped SiO2 active layer inserted between two Bragg reflectors consisting of ten pairs of SiO2/TiO2 layers. Scanning electron microscopy is employed to put in evidence the quality of the sample, the homogeneities of the layers thickness and the good adhesion among them. Near infrared transmittance and variable angle reflectance spectra confirm the presence of a stop band from 1500 nm to 2000 nm with a cavity resonance centered at 1749 nm at 0° and a quality factor of 890. The influence of the cavity on the 4I13/2 -->4I15/2 emission band of Er3+ ion is also demonstrated.
RESUMEN
Two different sol-gel hybrid organic-inorganic films doped with luminescent CdS or PbS quantum dots (QDs) have been successfully synthesized and patterned using nanolithographic techniques. The feasibility of applying X-ray lithography and RIE to pattern hybrid materials doped with highly luminescent nanoparticles has been demonstrated for GPTMS-GeO2 (G-GeO2) and MPTMS-ZrO2 (M-ZrO2) hybrids obtained form 3-glycidoxypropyltrymethoxysilane (GPTMS), methacryloxy-propil-trimethoxysilane (MPTMS), germanium ethoxide and zirconium propoxide. Semiconductor doped film have been obtained by mixing ZrO2-SiO2 or GeO2-SiO2 sol-gel hybrid organic-inorganic matrix solution with CdS or PbS colloidal doping solution to obtain up to 20% molar concentration of QDs inside the films. Patterns consisting of pillars with different aspect ratio have been obtained by X-ray lithography and reactive ion etching (RIE). Structural and optical characterization of films before and after the lithographic process pointed out that both matrices and QDs retain their original properties without been affected by X-rays irradiation and RIE in the conditions here described.
