Crystal structure of Streptococcus pneumoniae acyl carrier protein synthase: an essential enzyme in bacterial fatty acid biosynthesis.

Acyl carrier protein synthase (AcpS) catalyzes the formation of holo-ACP, which mediates the essential transfer of acyl fatty acid intermediates during the biosynthesis of fatty acids and lipids in the cell. Thus, AcpS plays an important role in bacterial fatty acid and lipid biosynthesis, making it an attractive target for therapeutic intervention. We have determined, for the first time, the crystal structure of the Streptococcus pneumoniae AcpS and AcpS complexed with 3'5'-ADP, a product of AcpS, at 2.0 and 1.9 A resolution, respectively. The crystal structure reveals an alpha/beta fold and shows that AcpS assembles as a tightly packed functional trimer, with a non-crystallographic pseudo-symmetric 3-fold axis, which contains three active sites at the interface between protomers. Only two active sites are occupied by the ligand molecules. Although there is virtually no sequence similarity between the S.pneumoniae AcpS and the Bacillus subtilis Sfp transferase, a striking structural similarity between both enzymes was observed. These data provide a starting point for structure-based drug design efforts towards the identification of AcpS inhibitors with potent antibacterial activity.

Crystal structure of human parathyroid hormone 1-34 at 0.9-A resolution.

The N-terminal fragment 1-34 of parathyroid hormone (PTH), administered intermittently, results in increased bone formation in patients with osteoporosis. PTH and a related molecule, parathyroid hormone-related peptide (PTHrP), act on cells via a common PTH/PTHrP receptor. To define more precisely the ligand-receptor interactions, we have crystallized human PTH (hPTH)-(1-34) and determined the structure to 0.9-A resolution. hPTH-(1-34) crystallizes as a slightly bent, long helical dimer. Analysis reveals that the extended helical conformation of hPTH-(1-34) is the likely bioactive conformation. We have developed molecular models for the interaction of hPTH-(1-34) and hPTHrP-(1-34) with the PTH/PTHrP receptor. A receptor binding pocket for the N terminus of hPTH-(1-34) and a hydrophobic interface with the receptor for the C terminus of hPTH-(1-34) are proposed.

The crystal structures of human alpha-thrombin complexed with active site-directed diamino benzo[b]thiophene derivatives: a binding mode for a structurally novel class of inhibitors.

The crystal structures of four active site-directed thrombin inhibitors, 1-4, in a complex with human alpha-thrombin have been determined and refined at up to 2.0 A resolution using X-ray crystallography. These compounds belong to a structurally novel family of inhibitors based on a 2,3-disubstituted benzo[b]thiophene structure. Compared to traditional active-site directed inhibitors, the X-ray crystal structures of these complexes reveal a novel binding mode. Unexpectedly, the lipophilic benzo[b]thiophene nucleus of the inhibitor appears to bind in the S1 specificity pocket. At the same time, the basic amine of the C-3 side chain of the inhibitor interacts with the mostly hydrophobic proximal, S2, and distal, S3, binding sites. The second, basic amine side chain at C-2 was found to point away from the active site, occupying a location between the S1 and S1' sites. Together, the aromatic rings of the C-2 and C-3 side chains sandwich the indole ring of Trp60D contained in the thrombin S2 insertion loop defined by the sequence "Tyr-Pro-Pro-Trp." [The thrombin residue numbering used in this study is equivalent to that reported for chymotrypsinogen (Hartley BS, Shotton DM, 1971, The enzymes, vol. 3. New York: Academic Press. pp 323-373).] In contrast to the binding mode of more classical thrombin inhibitors (D-Phe-Pro-Arg-H, NAPAP, Argatroban), this novel class of benzo[b]thiophene derivatives does not engage in hydrogen bond formation with Gly216 of the thrombin active site. A detailed analysis of the three-dimensional structures not only provides a clearer understanding of the interaction of these agents with thrombin, but forms a foundation for rational structure-based drug design. The use of the data from this study has led to the design of derivatives that are up to 2,900-fold more potent than the screening hit 1.

Structure-based design of potent, amidine-derived inhibitors of factor Xa: evaluation of selectivity, anticoagulant activity, and antithrombotic activity.

To enhance the potency of 1,2-dibenzamidobenzene-derived inhibitors of factor Xa (fXa), an amidine substituent was incorporated on one of the benzoyl side chains to interact with Asp189 in the S1 specificity pocket. Lead molecule 1 was docked into the active site of fXa to facilitate inhibitor design. Subsequently, iterative SAR studies and molecular modeling led to a 1000-fold increase in fXa affinity and a refined model of the new inhibitors in the fXa active site. Strong support for the computational model was achieved through the acquisition of an X-ray crystal structure using thrombin as a surrogate protein. The amidines in this series show high levels of selectivity for the inhibition of fXa relative to other trypsin-like serine proteases. Furthermore, the fXa affinity of compounds in this series (K(ass) = 50-500 x 10(6) L/mol) translates effectively into both anticoagulant activity in vitro and antithrombotic activity in vivo.

Diamino benzo[b]thiophene derivatives as a novel class of active site directed thrombin inhibitors. 5. Potency, efficacy, and pharmacokinetic properties of modified C-3 side chain derivatives.

A systematic investigation of the structure-activity relationships of the C-3 side chain of the screening hit 1a led to the identification of the potent thrombin inhibitors 23c, 28c, and 31c. Their activities (1240, 903, and 1271 x 10(6) L/mol, respectively) represent 2200- and 2900-fold increases in potency over the starting lead 1a. This activity enhancement was accomplished with an increase of thrombin selectivity. The in vitro anticoagulant profiles of derivatives 28c and 31c were determined, and they compare favorably with the clinical agent H-R-1-[4aS, 8aS]perhydroisoquinolyl-prolyl-arginyl aldehyde (D-Piq-Pro-Arg-H; 32). The more potent members of this series have been studied in an arterial/venous shunt (AV shunt) model of thrombosis and were found to be efficacious in reducing clot formation. However, their efficacy is currently limited by their rapid and extensive distribution following administration.

The design of potent, selective, non-covalent, peptide thrombin inhibitors utilizing imidazole as a S1 binding element.

Modeling of neutral or mildly basic functional groups in the S1 site of thrombin led to the targeting of imidazole as a S1 binding element and correctly predicted the optimal chain length for connecting this group with the S2 and S3 binding elements. Derivatives of 4-(3-aminopropyl)-imidazole can be selective inhibitors of thrombin demonstrating potent anticoagulant activity.

Dibasic benzo[b]thiophene derivatives as a novel class of active site directed thrombin inhibitors: 2. Sidechain optimization and demonstration of in vivo efficacy.

Potent, subnanomolar thrombin inhibitors 4, 5, and 6 are developed through side chain optimization of novel, benzo[b]thiophene-based small organic entities 2 and 3 and through SAR additivity studies of the new structural elements identified. X-ray crystallographic studies of 4b-thrombin complex revealed a hydrophobic and an electrostatic interaction of these new elements with thrombin at the S2 and S3 binding sites. In vitro and in vivo pharmacological studies showed that 4, 5, and 6 are potent anticoagulants in human plasma with demonstrated antithrombotic efficacy in a rat model of thrombosis.

Dibasic benzo[b]thiophene derivatives as a novel class of active site directed thrombin inhibitors. 2. Exploring interactions at the proximal (S2) binding site.

In an effort to increase the thrombin inhibitory activity of a novel series of inhibitors (i.e., 1a), substituents were incorporated at the C-3" position of the C-3 aryl ring (2). Consistent with the X-ray crystallography studies, small hydrophobic groups at the C-3" site (Br and Me) enhanced thrombin inhibitory activity by 8-fold. However, a few more hydrophilic substituents (NO2 and OMe) also enhanced the potency of the series. The biological results are discussed in terms of molecular modeling studies.

Viracept (nelfinavir mesylate, AG1343): a potent, orally bioavailable inhibitor of HIV-1 protease.

Using a combination of iterative structure-based design and an analysis of oral pharmacokinetics and antiviral activity, AG1343 (Viracept, nelfinavir mesylate), a nonpeptidic inhibitor of HIV-1 protease, was identified. AG1343 is a potent enzyme inhibitor (Ki = 2 nM) and antiviral agent (HIV-1 ED50 = 14 nM). An X-ray cocrystal structure of the enzyme-AG1343 complex reveals how the novel thiophenyl ether and phenol-amide substituents of the inhibitor interact with the S1 and S2 subsites of HIV-1 protease, respectively. In vivo studies indicate that AG1343 is well absorbed orally in a variety of species and possesses favorable pharmacokinetic properties in humans. AG1343 (Viracept) has recently been approved for marketing for the treatment of AIDS.

A single sequence change destabilizes the influenza virus neuraminidase tetramer.

A single change (E119G) in the influenza A virus N9 neuraminidase (NA) results in resistance of the enzyme to the NA inhibitor 4-Guanidino-Neu5Ac2en (4-GuDANA). This change causes a salt link between Glu119, which sits in a pocket in the bottom of the active site of the enzyme, and the 4-guanidinium moiety of the inhibitor to be lost. NA "heads" of the resistant enzyme produced only a few small crystals under conditions in which the wild-type enzyme readily formed large crystals. These small crystals were of sufficient quality to yield X-ray crystallographic data which confirmed the E119G change and demonstrated the presence of electron density representing either a strong structural-water molecule or an anionic species in place of the glutamate carboxylate. NA heads of the resistant enzyme also have greatly reduced NA activity per milligram of total protein. We have now found that the mutant NA heads consist predominantly of monomers with a few dimers and tetramers, as determined by electron microscopic analysis of the protein. The low level of enzymatic activity as well as the small number of crystals obtained were probably from the few tetramers remaining intact in the preparation. The purified wild-type and 4-GuDANA-resistant enzymes were treated with the homobifunctional NHS-ester cross linker, DTSSP. SDS-PAGE analysis of the treated enzymes clearly revealed cross-linked dimers of the wild-type enzyme. In contrast, only a small proportion of the 4-GuDANA-resistant neuraminidase was cross-linked. An examination of the known X-ray crystallographic structure of the wild-type NA reveals a salt bridge between Glu119 and Arg156 of the same monomer. Arg156 is a conserved amino acid that is situated at the interface between monomers, and a salt link between this amino acid and Glu119 may contribute to the stability of enzyme tetramers. It is suggested that the E119G alteration in the 4-GuDANA-resistant NA leads to the abrogation of this interaction and thus to the instability of the NA tetramers.

The crystal structure of human alpha-thrombin complexed with LY178550, a nonpeptidyl, active site-directed inhibitor.

The crystal structure of human alpha-thrombin in complex with LY178550, a nonpeptidyl, active site-directed inhibitor, has been solved to 2.07 A resolution by the method of X-ray crystallography. The final model of the complex has a crystallographic R-value of 21.5% (Rfree = 23.1%) with 0.014 A and 2.4 degrees standard deviation from ideal bond lengths and angles, respectively. Well-defined electron density was observed for the inhibitor in the active site. The inhibitor binds to the active site in an L-shaped manner, mimicking the bound conformation of the tripeptide arginal series of thrombin inhibitors (Chirgadze NY et al., 1992, American Crystallographic Association Meeting 20: 116 [Abstr. PB311]). The basic amidine of LY178550 forms a salt bridge with Asp 189 within the specificity pocket, while the 4-benzylpiperidine side chain engages in a number of hydrophobic interactions at the S2 and S3 binding sites. The inhibitor does not interact in any fashion with the active site sequence Ser 214-Gly 216, as occurs with many of the inhibitors studied previously. The indole N-H of the inhibitor forms a hydrogen bond to the gamma-oxygen of the catalytic serine (Ser 195).

Indole inhibitors of human nonpancreatic secretory phospholipase A2. 2. Indole-3-acetamides with additional functionality.

As reported in our previous paper, a series of indole-3-acetamides which possessed potency and selectivity as inhibitors of human nonpancreatic secretory phospholipase A2(hnps-PLA2) was developed. The design of these compounds was based on information derived from x-ray crystal structures determined for complexes between the enzyme and its inhibitors. We describe here the further implementation of this structure-based design strategy and continued SAR development to produce indole-3-acetamides with additional functionalities which provide increased interaction with important residues within the enzyme active site. These efforts led to inhibitors with substantially enhanced potency and selectivity.

Indole inhibitors of human nonpancreatic secretory phospholipase A2. 3. Indole-3-glyoxamides.

The preceding papers of this series detail the development of functionalized indole-3-acetamides as inhibitors of hnps-PLA2. We describe here the extension of the structure-activity relationship to include a series of indole-3-glyoxamide derivatives. Functionalized indole-3-glyoxamides with an acidic substituent appended to the 4- or 5-position of the indole ring were prepared and tested as inhibitors of hnps-PLA2. It was found that the indole-3-glyoxamides with a 4-oxyacetic acid substituent had optimal inhibitory activity. These inhibitors exhibited an improvement in potency over the best of the indole-3-acetamides, and LY315920 (6m) was selected for evaluation clinically as an hnps-PLA2 inhibitor.

Indole inhibitors of human nonpancreatic secretory phospholipase A2. 1. Indole-3-acetamides.

Phospholipases (PLAs) produce rate-limiting precursors in the biosynthesis of various types of biologically active lipids involved in inflammatory processes. Increased levels of human nonpancreatic secretory phospholipase A2 (hnps-PLA2) have been detected in several pathological conditions. An inhibitor of this enzyme could have therapeutic utility. A broad screening program was carried out to identify chemical structures which could inhibit hnps-PLA2. One of the lead compounds generated by the screening program was 5-methoxy-2-methyl-1-(phenylmethyl)-1H-indole-3-acetic acid (13a). We describe the syntheses, structure--activity relationships, and pharmacological activities of a series of indole-3-acetamides and related compounds derived from this lead. This SAR was undertaken with the aid of X-ray crystal structures of complexes between the inhibitors and hnps-PLA2 which were of great value in directing the SAR.

Structure-based design of the first potent and selective inhibitor of human non-pancreatic secretory phospholipase A2.

A lead compound obtained from a high volume human non-pancreatic secretory phospholipase A2 (hnps-PLA2) screen has been developed into a potent inhibitor using detailed structural knowledge of inhibitor binding to the enzyme active site. Four crystal structures of hnps-PLA2 complexed with a series of increasingly potent indole inhibitors were determined and used as the structural basis for both understanding this binding and providing valuable insights for further development. The application of structure-based drug design has made possible improvements in the binding of this screening lead to the enzyme by nearly three orders of magnitude. Furthermore, the optimized structure (LY311727) displayed 1,500-fold selectivity when assayed against porcine pancreatic s-PLA2.

Purification, characterization and preliminary X-ray study of fumarase from Saccharomyces cerevisiae.

Fumarase (fumarate hydratase, EC 4.2.1.2) from Saccharomyces cerevisiae has been purified to homogeneity by a method including acetone fractionation, DEAE ion-exchange and dye-sorbent affinity chromatography. The suggested method allows fumarase purification with a yield higher than 60% and may be used to obtain large enzyme quantities. The native protein consists of four subunits with a approximately 50 kDa molecular mass each and has an isoelectric point at pH 6.5 +/- 0.3. The equilibrium constant for fumarate hydration is about 4.3 (25 degrees C, pH 7.5), the Michaelis constants for fumarate and 1-malate are approximately 30 microM and approximately 250 microM, respectively. The enzyme is activated by substrates and multivalent anions, the activation seems to be of a non-competitive type. The fumarase complex with meso-tartaric acid has been crystallized by the vapor diffusion method. The unit cell parameters are a = 93.30, b = 94.05 and c = 106.07 A, space group P2(1)2(1)2(1). The unit cell contains 2 protein molecules. The crystals diffract to at least 2.6 A resolution and are suitable for X-ray structure analysis.