Direct photodegradation of internally mixed sodium chloride and malonic acid single aerosols: Impact of the photoproducts on the hygroscopic properties of the particles.

Sea-salt aerosols (SSA) are one of the key natural aerosols in our atmosphere, consisting predominantly of sodium chloride (NaCl). Throughout their atmospheric transport, these aerosols undergo complex internal mixing, giving rise to a rich variety of inorganic and organic species, including dicarboxylic acids. This study investigates firstly the composition and deliquescence properties of coarse particles containing pure malonic acid (MA2, CH2(COOH)2) and internally mixed NaCl and MA2, by means of an acoustic levitation system coupled with a Raman microspectrometer. Secondly, we report here the first experimental observation and characterization of the products arising from photochemical reactions under UV-Visible irradiation (338 ≤ λ ≤ 414 nm) in the absence of an oxidant under acoustic levitation conditions in MA2 and NaCl/MA2 aerosols. Furthermore, the impact of photodegradation on the hygroscopic properties of these particles is examined. We confirmed the irreversible formation of monosodium malonate (NaMA, HOOCCH2COONa), which coexists with NaCl or MA2 on non-irradiated particles. We also demonstrated the formation of oxalic acid (OA2, HOOC-COOH) within irradiated MA2 droplets and the appearance of glyoxylic acid (GlyA, HCOCOOH) in NaCl containing droplets. The photolysis process exerts a marked effect on the hygroscopic properties of the particles, resulting in a shift in deliquescence transitions toward higher relative humidity (RH) values. This study contributes to the understanding of the intricate physicochemical processes involved in SSA during their atmospheric transport. Likewise, this work sheds light on the impacts of these types of aerosols on cloud formation and climate change.

Uptake of ozone by allergenic pollen grains.

Ozone exacerbates allergy symptoms to certain pollens. The molecular mechanisms by which ozone affects pollen grains (PGs) and allergies are not fully understood, especially as the effects of pollutants may vary depending on the type of pollen. In this work, pollens of 22 different taxa were exposed under laboratory conditions to ozone (100 ppb) to quantify the ozone uptake by the PGs. The ozone uptake was highly variable among the 22 taxa tested. The highest ozone uptake per PG was measured on Acer negundo PGs (2.5 ± 0.2 pg∙PG-1). On average, tree pollens captured significantly more ozone than herbaceous pollens (average values of 0.5 and 0.02 pg∙PG-1, respectively). No single parameter (such as the number of apertures, pollen season, pollen size, or lipid fraction) could predict a pollen's ability to take up ozone. Lipids seem to act as a barrier to ozone uptake and play a protective role for some taxa. After inhalation of PGs, pollen-transported ozone could be transferred to mucous membranes and exacerbate symptoms through oxidative stress and local inflammation. Although the amount of ozone transported is small in absolute terms, it is significant compared to the antioxidant capacity of nasal mucus at a microscale. This mechanism of pollen-induced oxidative stress could explain the aggravation of allergic symptoms during ozone pollution episodes.

Exposure to atmospheric Ag, TiO2, Ti and SiO2 engineered nanoparticles modulates gut inflammatory response and microbiota in mice.

The development of nanotechnologies is leading to greater abundance of engineered nanoparticles (EN) in the environment, including in the atmospheric air. To date, it has been shown that the most prevalent EN found in the air are silver (Ag), titanium dioxide (TiO2), titanium (Ti), and silicon dioxide (SiO2). As the intestinal tract is increasingly recognized as a target for adverse effects induced by inhalation of air particles, the aim of this study was to assess the impact of these 4 atmospheric EN on intestinal inflammation and microbiota. We assessed the combined toxicity effects of Ag, Ti, TiO2, and SiO2 following a 28-day inhalation protocol in male and female mice. In distal and proximal colon, and in jejunum, EN mixture inhalation did not induce overt histological damage, but led to a significant modulation of inflammatory cytokine transcript abundance, including downregulation of Tnfα, Ifnγ, Il1ß, Il17a, Il22, IL10, and Cxcl1 mRNA levels in male jejunum. A dysbiosis was observed in cecal microbiota of male and female mice exposed to the EN mixture, characterized by sex-dependent modulations of specific bacterial taxa, as well as sex-independent decreased abundance of the Eggerthellaceae family. Under dextran sodium sulfate-induced inflammatory conditions, exposure to the EN mixture increased the development of colitis in both male and female mice. Moreover, the direct dose-response effects of individual and mixed EN on gut organoids was studied and Ag, TiO2, Ti, SiO2, and EN mixture were found to generate specific inflammatory responses in the intestinal epithelium. These results indicate that the 4 most prevalent atmospheric EN could have the ability to disturb intestinal homeostasis through direct modulation of cytokine expression in gut epithelium, and by altering the inflammatory response and microbiota composition following inhalation.

Impact of the particle mixing state on the hygroscopicity of internally mixed sodium chloride-ammonium sulfate single droplets: a theoretical and experimental study.

Sodium chloride (NaCl) is the main constituent of sea-salt aerosols. During atmospheric transport, sea-salt aerosols can interact with gases and other particles including secondary aerosols containing ammonium sulfate ((NH4)2SO4). This paper reports on the deliquescence relative humidity (DRH) of internally mixed sodium chloride-ammonium sulfate (NaCl/(NH4)2SO4) coarse particles by means of an acoustic levitation system fitted with a confocal Raman microscope (CRM). The chemical composition and physical state of individual levitated particles of different initial NaCl mole fractions were monitored during the deliquescence cycle by CRM. Experimental results were compared to the data predicted by the thermodynamic model E-AIM (Extended-Aerosol Inorganics Model). We demonstrated that NH4Cl, Na2SO4 and NH4NaSO4·2H2O are formed in recrystallized particles and coexist with NaCl and (NH4)2SO4. All these products are randomly distributed within the particles. Deliquescence curves described two or three-stage phase transitions depending on the initial composition of the droplet. Significant discrepancies between the model and the laboratory experiments were observed for NaCl mole fractions varying between 0.40 and 0.77 due to a divergence between the predicted and the truly present products in the particles' solid fraction during the humidification cycle.

Biochemical composition of Phleum pratense pollen grains: A review.

The Poaceae family is composed of 12,000 plant species. Some of these species produce highly allergenic anemophilous pollen grains (PGs). Phleum pratense pollen grains (PPPGs) emerged as a model for studies related to grass allergy. The biochemical composition of allergenic PGs has not yet been fully described despite potential health effects of PG constituents other than allergenic proteins. This review brings together the information available in literature aiming at creating a comprehensive picture of the current knowledge about the chemical composition of allergenic PGs from timothy grass. PPPGs have an average diameter between 30-35 µm and the mass of a single PG was reported between 11 and 26 ng. The pollen cytoplasm is filled with two types of pollen cytoplasmic granules (PCGs): the starch granules and the polysaccharide particles (p-particles). Starch granules have a size between 0.6-2.5 µm with an average diameter of 1.1 µm (estimated number of 1000 granules per PG) while p-particles have a size ranging around 0.3 to 0.4 µm (estimated number between 61,000-230,000 p-particles per PG). The rupture of PG induces the release of PCGs and the dispersion of allergens in the inhalable fraction of atmospheric aerosol. PPPGs are composed of sporopollenin, sugars, polysaccharides, starch, glycoproteins (including allergens), amino-acids, lipids, flavonoids (including isorhamnetin), various elements (the more abundant being Si, Mg and Ca), phenolic compounds, phytoprostanoids, carotenoids (pigments) metals and adsorbed pollutants. PPPG contains about a hundred different proteins with molecular masses ranging from 10 to 94 kDa, with isoelectric points from 3.5-10.6. Among these proteins, allergens are classified in eleven groups from 1 to 13 with allergens from groups 1 and 5 being the major contributors to Phl p pollen allergy. Major allergen Phl p 5 was quantified in PPPGs by several studies with concentration ranging from 2.7 and 3.5 µg.mg-1 in unpolluted environment. Values for other allergens are scarce in literature; only one quantitative assessment exists for allergen groups Phl p 1, 2 and 4. The extractible lipid fraction of PPPGs is estimated between 1.7-2.2% of the total PG mass. The main chemical families of lipids reported in PPPGs are: alkanes, alkenes, alcohols, saturated and unsaturated fatty acids, di- and tri-hydroxylated fatty acids, aldehydes and sterols. Several lipid compounds with potential adjuvant effects on allergy have been specifically quantified in PPPGs: E2-like prostaglandin (PGE2), B4-like leukotriene (LTB4), unsaturated fatty acids (linoleic and linolenic acids and their hydroxylated derivatives), adenosine, vitamins and phenolic compounds. Some other biochemical characteristics such as NAD(P)H oxidase, protease activity and pollen microbiome were described in the literature. The bioaccessibility in physiological conditions has not been described for most biochemicals transported by allergenic PPPGs. There is also a considerable lack of knowledge about the potential health effects of pollen constituents other than allergens. The variability of pollen composition remains also largely unknown despite its importance for plant reproduction and allergy in an environment characterized by chemical pollution, climate change and loss of biodiversity.

Organic and aqueous extraction of lipids from birch pollen grains exposed to gaseous pollutants.

The lipid fraction of birch pollen grains (BPGs) is not yet fully described, although pollen lipid molecules may play a role in the allergic immune response. The mechanisms by which atmospheric pollutants modify allergenic pollen grains (PGs) are also far from being elucidated despite high potential effects on allergic sensitization. This work is a contribution to a better description of the lipid profile (both external and cytoplasmic) of BPGs and of alterations induced by gaseous air pollutants. Several lipid extractions were performed using organic and aqueous solvents on BPGs following exposure to ozone and/or nitrogen dioxide and under conditions favoring the release of internal lipids. Ozone reacted with alkenes to produce aldehydes and saturated fatty acids, while nitrogen dioxide was shown to be unreactive with lipids. NO2 exhibited a protective effect against the reactivity of alkenes with ozone, probably by competition for adsorption sites. The decreased reactivity of ozone during simultaneous exposure to NO2/O3 raised the possibility of a Langmuir-Hinshelwood mechanism. Oxidation reactions induced by exposure of BPGs to ozone did not substantially modify the extraction of lipids by aqueous solvent, suggesting that the bioaccessibility of lipids was not modified by oxidation. On the contrary, the rupture of PGs appeared to be a key factor in enhancing the bioaccessibility of bioactive lipid mediators (linoleic and α-linolenic acids) in an aqueous solution. The internal lipid fraction of BPGs has specific characteristics compared with external lipids, with more abundant hexadecanoic acid, tricosanol, and particularly unsaturated fatty acids (linoleic and α-linolenic acids). Several mechanisms of action of gaseous pollutants on allergenic pollen were identified in this study: gaseous air pollutants can (i) modify the external lipid fraction by reactivity of alkenes, (ii) adsorb on the surface of PGs and be a source of oxidative stress after inhalation of PGs, and (iii) promote the release of cytoplasmic bioactive lipids by facilitating pollen rupture.

Uptake of ozone and modification of lipids in Betula Pendula pollen.

Pollen allergy risk is modified by air pollutants, including ozone, but the chemical modifications induced on pollen grains are poorly understood. Pollen lipidic extract has been shown to act as an adjuvant to the allergenic reaction and therefore, the modification of lipids by air pollutants could have health implications. Birch pollen was exposed in vitro to ozone to explore the reactivity of O3 on its surface and on its lipidic fraction. Uptake coefficients of ozone were determined for ozone concentration of 117 ppb on the surface of native birch pollen (8.6 ±â€¯0.8 × 10-6), defatted pollen (9.9 ±â€¯0.9 × 10-6), and for crushed pollen grains (34±3 × 10-6). The mass of ozone uptaken was increased by a factor of four for crushed pollen compared to native pollen showing a higher susceptibility to ozone of cytoplasmic granules and broken pollen grains. A total mass of extractible lipids of 27 mg per gram of birch pollen was found and a fraction of these lipids was identified and quantified (fatty acids, alkanes, alkenes and aldehydes). The distribution of lipids was modified by ozone exposure of 115 and 1000 ppb for 16 h with the following reactivity: consumption of alkene, formation of aldehydes and formation of nonanoic acid and octadecanoic acid. The quantity of ozone trapped in the lipidic fraction during 15 min at 115 ppb is enough to contribute to the reactivity of one-third of the alkenes demonstrating that pollen could be susceptible to an atmospheric increase of ozone concentration even for a very short duration complicating the understanding of the link between pollen allergy and pollution.

Kinetic of NO2 uptake by Phleum pratense pollen: chemical and allergenic implications.

Phleum pratense pollen was exposed to NO(2) in a reactor allowing a continuous analysis of NO(2) concentration by FTIR. The uptake coefficient of NO(2) on pollen was calculated postulating a first order kinetic reaction and a value of (1.1 ± 0.1) x 10(-7) was determined. NO(2) uptake was faster when the pollen water content was increased and when the pollen was pre-treated with ozone. The effect of NO(2) exposure on pollen allergic properties was investigated by quantifying Th2- and Th1-associated chemokines in a model of human dendritic cells. Cellular analysis clearly showed that cells exposed to fumigated pollen favored the production of chemokines known to promote Th2-cell responses. Altogether these data demonstrate that NO(2) uptake by pollen directly correlates with increased Th2 response in human cells,and are in favor of the involvement of NO(2) pollution in the increase of allergic diseases.

Investigation of the chemical mixing state of individual Asian dust particles by the combined use of electron probe X-ray microanalysis and Raman microspectrometry.

In this work, quantitative electron probe X-ray microanalysis (EPMA) and Raman microspectrometry (RMS) were applied in combination for the first time to characterize the complex internal structure and physicochemical properties of the same ensemble of Asian dust particles. The analytical methodology to obtain the chemical composition, mixing state, and spatial distribution of chemical species within single particles through the combined use of the two techniques is described. Asian dust aerosol particles collected in Incheon, Korea, during a moderate dust storm event were examined to assess the applicability of the methodology to resolve internal mixtures within single particles. Among 92 individual analyzed particles, EPMA and RMS identified 53% of the particles to be internally mixed with two or more chemical species. Information on the spatial distribution of chemical compounds within internally mixed individual particles can be useful for deciphering the particle aging mechanisms and sources. This study demonstrates that the characterization of individual particles, including chemical speciation and mixing state analysis, can be performed more in detail using EPMA and RMS in combination than with the two single-particle techniques alone.

The influence of collecting substrates on the single-particle characterization of real atmospheric aerosols.

This work investigated the influence of three different collecting substrate materials, Ag and Al foils and grids for transmission electron microscopy (TEM grid), on the morphological and chemical compositional analysis of individual particles collected at an underground shopping area in Seoul, Korea. The feasibility of using each substrate in a quantitative single-particle analysis was evaluated by comparing particle morphologies, X-ray spectra, and elemental quantification results obtained for the three substrates. The morphologies and the quality of X-ray spectra for crystalline mineral particles were very similar among the three substrates. However, water-soluble, CNO-rich aerosols showed different morphologies among the three substrates, mainly due to the differences in the hygroscopic properties of the substrates. The quality of the X-ray spectra of the CNO-rich particles was optimal when collected on the TEM grid. To reliably assess the characteristic X-rays of the CNO-rich particles collected on the Ag and Al foils, appropriate data analysis had to be applied. Especially, the X-ray spectra of the CNO-rich particles collected on Al foil required a new background subtraction procedure. The overall relative abundances of the chemical species, obtained from the three collecting substrates, were in good agreement with each other and single-particle characterization of the real aerosol sample was feasible on the different substrates. However, the TEM grid substrate was the most appropriate for single-particle analysis of the water-soluble CNO-rich particles as: (i) it retains the original morphology and size of the particles, (ii) it allows high contrast in the backscattered electron image (BSEI) mode, and (iii) it provides a high peak-to-background ratio (P/B) with small and correctable interferences in the X-ray spectra.

Iron isotopic fractionation in industrial emissions and urban aerosols.

A study on tropospheric aerosols involving Fe particles with an industrial origin is tackled here. Aerosols were collected at the largest exhausts of a major European steel metallurgy plant and around its near urban environment. A combination of bulk and individual particle analysis performed by SEM-EDX provides the chemical composition of Fe-bearing aerosols emitted within the factory process (hematite, magnetite and agglomerates of these oxides with sylvite (KCl), calcite (CaCO(3)) and graphite carbon). Fe isotopic compositions of those emissions fall within the range (0.08 per thousand

Quantitative determination of low-Z elements in single atmospheric particles on boron substrates by automated scanning electron microscopy-energy-dispersive X-ray spectrometry.

Atmospheric aerosols consist of a complex heterogeneous mixture of particles. Single-particle analysis techniques are known to provide unique information on the size-resolved chemical composition of aerosols. A scanning electron microscope (SEM) combined with a thin-window energy-dispersive X-ray (EDX) detector enables the morphological and elemental analysis of single particles down to 0.1 microm with a detection limit of 1-10 wt %, low-Z elements included. To obtain data statistically representative of the air masses sampled, a computer-controlled procedure can be implemented in order to run hundreds of single-particle analyses (typically 1000-2000) automatically in a relatively short period of time (generally 4-8 h, depending on the setup and on the particle loading). However, automated particle analysis by SEM-EDX raises two practical challenges: the accuracy of the particle recognition and the reliability of the quantitative analysis, especially for micrometer-sized particles with low atomic number contents. Since low-Z analysis is hampered by the use of traditional polycarbonate membranes, an alternate choice of substrate is a prerequisite. In this work, boron is being studied as a promising material for particle microanalysis. As EDX is generally said to probe a volume of approximately 1 microm3, geometry effects arise from the finite size of microparticles. These particle geometry effects must be corrected by means of a robust concentration calculation procedure. Conventional quantitative methods developed for bulk samples generate elemental concentrations considerably in error when applied to microparticles. A new methodology for particle microanalysis, combining the use of boron as the substrate material and a reverse Monte Carlo quantitative program, was tested on standard particles ranging from 0.25 to 10 microm. We demonstrate that the quantitative determination of low-Z elements in microparticles is achievable and that highly accurate results can be obtained using the automatic data processing described here compared to conventional methods.