Photoluminescence switching in quantum dots connected with fluorinated and hydrogenated photochromic molecules.

We investigate switching of photoluminescence (PL) from PbS quantum dots (QDs) crosslinked with two different types of photochromic diarylethene molecules, 4,4'-(1-cyclopentene-1,2-diyl)bis[5-methyl-2-thiophenecarboxylic acid] (1H) and 4,4'-(1-perfluorocyclopentene-1,2-diyl)bis[5-methyl-2-thiophenecarboxylic acid] (2F). Our results show that the QDs crosslinked with the hydrogenated molecule (1H) exhibit a greater amount of switching in photoluminescence intensity compared to QDs crosslinked with the fluorinated molecule (2F). With a combination of differential pulse voltammetry and density functional theory, we attribute the different amount of PL switching to the different energy levels between 1H and 2F molecules which result in different potential barrier heights across adjacent QDs. Our findings provide a deeper understanding of how the energy levels of bridge molecules influence charge tunneling and PL switching performance in QD systems and offer deeper insights for the future design and development of QD based photo-switches.

Ytterbium-Doped Cesium Lead Chloride Perovskite as an X-ray Scintillator with High Light Yield.

Ytterbium-doped cesium lead halides are quantum cutting materials with exceptionally high photoluminescence quantum yields, making them promising materials as scintillators. In this work, we report ytterbium-doped cesium lead chloride (Yb3+:CsPbCl3) with an X-ray scintillation light yield of 102,000 photons/MeV at room temperature, which is brighter than the current state-of-the-art commercial scintillators. The high light yield was achieved based on a novel method of synthesizing Yb3+:CsPbCl3 powders using water and low-temperature processing. The combination of high light yield and the simple and inexpensive manufacturing method reported in this work demonstrates the great potential of Yb3+:CsPbCl3 for scintillation applications.

Organic molecular dynamics and charge-carrier lifetime in lead iodide perovskite MAPbI3.

The long charge carrier lifetime of the hybrid organic-inorganic perovskites (HOIPs) is the key for their remarkable performance as a solar cell material. The microscopic mechanism for the long lifetime is still in debate. Here, by using a muon spin relaxation technique that probes the fluctuation of local magnetic fields, we show that the muon depolarization rate (Δ) of a prototype HOIP methylammonium lead iodide (MAPbI3) shows a sharp decrease with increasing temperature in two steps above 120 K and 190 K across the structural transition from orthorhombic to tetragonal structure at 162 K. Our analysis shows that the reduction of Δ is quantitatively in agreement with the expected behavior due to the rapid development of methyl ammonium (MA) jumping rotation around the C 3 and C 4 symmetry axes. Our results provide direct evidence for the intimate relation between the rotation of the electric dipoles of MA molecules and the charge carrier lifetime in HOIPs.

Ultralow Thermal Conductivity of Two-Dimensional Metal Halide Perovskites.

We report on the thermal conductivities of two-dimensional metal halide perovskite films measured by time domain thermoreflectance. Depending on the molecular substructure of ammonium cations and owing to the weaker interactions in the layered structures, the thermal conductivities of our two-dimensional hybrid perovskites range from 0.10 to 0.19 W m-1 K-1, which is drastically lower than that of their three-dimensional counterparts. We use molecular dynamics simulations to show that the organic component induces a reduction of the stiffness and sound velocities along with giving rise to vibrational modes in the 5-15 THz range that are absent in the three-dimensional counterparts. By systematically studying eight different two-dimensional hybrid perovskites, we show that the thermal conductivities of our hybrid films do not depend on the thicknesses of the organic layers and instead are highly dependent on the relative orientation of the organic chains sandwiched between the inorganic constituents.

Crystal structures and rotational dynamics of a two-dimensional metal halide perovskite (OA)2PbI4.

The extended charge carrier lifetime in metal halide perovskites is responsible for their excellent optoelectronic properties. Recent studies indicate that the superb device performance in these materials is intimately related to the organic cation dynamics. Here, we focus on the investigation of the two-dimensional hybrid perovskite, (C8H17NH3)2PbI4 (henceforth, OA+ = C8H17NH3 +). Using elastic and quasielastic neutron scattering techniques and group theoretical analysis, we studied the structural phase transitions and rotational modes of the C8H17NH3 + cation in (OA)2PbI4. Our results show that, in the high-temperature orthorhombic (T > 310 K) phase, the OA+ cation exhibits a combination of a twofold rotation of the NH3-CH2 head group about the crystal c-axis with a characteristic relaxation time of ∼6.2 ps, threefold rotations (C3) of NH3 and CH3 terminal groups, and slow librations of the other atoms. Contrastingly, only the C3 rotation is present in the intermediate-temperature orthorhombic (238 K < T < 310 K) and low-temperature monoclinic (T < 238 K) phases.

Crystallization of high aspect ratio HKUST-1 thin films in nanoconfined channels for selective small molecule uptake.

We present the ability to create unique morphologies of a prototypical metal organic framework (MOF), HKUST-1, by carrying out its crystallization within a set of nano-confined fluidic channels. These channels are fabricated on cyclic olefin copolymer by the high-fidelity hot embossing imprinting method. The picoliter volume synthesis in the nanochannels is hypothesized to bias the balance between nucleation and growth rates to obtain high aspect ratio large-crystalline domains of HKUST-1, which are grown in defined morphologies due to the patterned nanochannels. Confined crystal growth is achieved in nanofluidic channels as shallow as 50 nm. HKUST-1 crystalline domains with aspect ratios greater than 2500, and lengths up to 144 µm are obtained using the nanochannels, exceeding values obtained using chemical modulation and other confinement methods. HKUST-1 crystals are characterized using optical microscopy and scanning electron microscopy with energy dispersive spectroscopy. Porosity of the MOF and selective molecular uptake is demonstrated through inclusion of anthracene and methylene blue within the HKUST-1 framework, and with exclusion of rhodamine B and riboflavin, characterized using a confocal fluorescence microscope. We attribute this selectivity to the analyte size and electrostatic characteristics. Nanoconfined crystallization of MOFs can thus yield control over crystalline morphology to create ideal MOF crystals for enabling selective molecular enrinchment and sensing.

Laser Annealing of TiO2 Electron-Transporting Layer in Perovskite Solar Cells.

Solution-processed TiO2 and other metal-oxide electron-transporting layers (ETLs) for perovskite solar cells commonly require high-temperature annealing (>450 °C), causing the underlying indium-tin oxide (ITO) to degrade and inhibiting the use of flexible plastic substrates, such as poly(ethylene naphthalate). Laser-based solar cell manufacturing is attracting increased interest and can enable rapid and low-temperature fabrication of perovskite solar cells. By using novel pulsed ultraviolet laser processing on the solution-processed TiO2, we demonstrate a champion 17.1% efficient flexible perovskite solar cell. We can independently control the annealing of the ETL without affecting the underlying ITO or substrate due to the shallow absorption depth and short pulse duration of the laser. Ellipsometry and X-ray photoelectron spectroscopy verify that the laser-annealed TiO2 thin film is stoichiometric and relatively denser than the thermally annealed control sample. The efficiencies of the laser-processed devices exceeded those fabricated via hot plate, but with the added benefit of a high-throughput, low-temperature, and flexible-substrate-friendly process.

Impact of Crystallographic Orientation Disorders on Electronic Heterogeneities in Metal Halide Perovskite Thin Films.

Metal halide perovskite thin films have achieved remarkable performance in optoelectronic devices but suffer from spatial heterogeneity in their electronic properties. To achieve higher device performance and reliability needed for widespread commercial deployment, spatial heterogeneity of optoelectronic properties in the perovskite thin film needs to be understood and controlled. Clear identification of the causes underlying this heterogeneity, most importantly the spatial heterogeneity in charge trapping behavior, has remained elusive. Here, a multimodal imaging approach consisting of photoluminescence, optical transmission, and atomic force microscopy is utilized to separate electronic heterogeneity from morphology variations in perovskite thin films. By comparing the degree of heterogeneity in highly oriented and randomly oriented polycrystalline perovskite thin film samples, we reveal that disorders in the crystallographic orientation of the grains play a dominant role in determining charge trapping and electronic heterogeneity. This work also demonstrates a polycrystalline thin film with uniform charge trapping behavior by minimizing crystallographic orientation disorder. These results suggest that single crystals may not be required for perovskite thin film based optoelectronic devices to reach their full potential.

Origin of vertical orientation in two-dimensional metal halide perovskites and its effect on photovoltaic performance.

Thin films based on two-dimensional metal halide perovskites have achieved exceptional performance and stability in numerous optoelectronic device applications. Simple solution processing of the 2D perovskite provides opportunities for manufacturing devices at drastically lower cost compared to current commercial technologies. A key to high device performance is to align the 2D perovskite layers, during the solution processing, vertical to the electrodes to achieve efficient charge transport. However, it is yet to be understood how the counter-intuitive vertical orientations of 2D perovskite layers on substrates can be obtained. Here we report a formation mechanism of such vertically orientated 2D perovskite in which the nucleation and growth arise from the liquid-air interface. As a consequence, choice of substrates can be liberal from polymers to metal oxides depending on targeted application. We also demonstrate control over the degree of preferential orientation of the 2D perovskite layers and its drastic impact on device performance.

Origin of long lifetime of band-edge charge carriers in organic-inorganic lead iodide perovskites.

Long carrier lifetime is what makes hybrid organic-inorganic perovskites high-performance photovoltaic materials. Several microscopic mechanisms behind the unusually long carrier lifetime have been proposed, such as formation of large polarons, Rashba effect, ferroelectric domains, and photon recycling. Here, we show that the screening of band-edge charge carriers by rotation of organic cation molecules can be a major contribution to the prolonged carrier lifetime. Our results reveal that the band-edge carrier lifetime increases when the system enters from a phase with lower rotational entropy to another phase with higher entropy. These results imply that the recombination of the photoexcited electrons and holes is suppressed by the screening, leading to the formation of polarons and thereby extending the lifetime. Thus, searching for organic-inorganic perovskites with high rotational entropy over a wide range of temperature may be a key to achieve superior solar cell performance.

Room-Temperature Processing of TiOx Electron Transporting Layer for Perovskite Solar Cells.

In order to realize high-throughput roll-to-roll manufacturing of flexible perovskite solar cells, low-temperature processing of all device components must be realized. However, the most commonly used electron transporting layer in high-performance perovskite solar cells is based on TiO2 thin films processed at high temperature (>450 °C). Here, we demonstrate room temperature solution processing of the TiOx layer that performs as well as the high temperature TiO2 layer in perovskite solar cells, as evidenced by a champion solar cell efficiency of 16.3%. Using optical spectroscopy, electrical measurements, and X-ray diffraction, we show that the room-temperature processed TiOx is amorphous with organic residues, and yet its optical and electrical properties are on par with the high-temperature TiO2. Flexible perovskite solar cells that employ a room-temperature TiOx layer with a power conversion efficiency of 14.3% are demonstrated.

Entropy-driven structural transition and kinetic trapping in formamidinium lead iodide perovskite.

A challenge of hybrid perovskite solar cells is device instability, which calls for an understanding of the perovskite structural stability and phase transitions. Using neutron diffraction and first-principles calculations on formamidinium lead iodide (FAPbI3), we show that the entropy contribution to the Gibbs free energy caused by isotropic rotations of the FA+ cation plays a crucial role in the cubic-to-hexagonal structural phase transition. Furthermore, we observe that the cubic-to-hexagonal phase transition exhibits a large thermal hysteresis. Our first-principles calculations confirm the existence of a potential barrier between the cubic and hexagonal structures, which provides an explanation for the observed thermal hysteresis. By exploiting the potential barrier, we demonstrate kinetic trapping of the cubic phase, desirable for solar cells, even at 8.2 K by thermal quenching.

Nature of the cubic to tetragonal phase transition in methylammonium lead iodide perovskite.

Hybrid organic-inorganic perovskites, as well as the perovskites in general, are known for their phase complexity evidenced by the stabilization of different polymorphs, and thus an understanding of their regions of stability and transitions can be important for their photovoltaic and optoelectronic technologies. Here we use a multiscale approach based on first-principles calculations with van der Waals corrections and classical force-field molecular dynamics to determine the finite-temperature properties of the tetragonal and cubic phases of CH3NH3PbI3. Temperature effects are implicitly included using the quasi-harmonic approximation that can describe anharmonic behavior due to thermal expansion through the dependence of the harmonic frequencies on structural parameters. Our finite-temperature free-energy surfaces predict the lattice and elastic moduli evolution with temperature, and show in particular that the calculated lattice parameters of the cubic and tetragonal phases are to within 1% of experimental values. Further, our results show that the phonons are the major contributing factor for stabilizing the cubic phase at high temperatures mainly due to the low-energy phonon modes that are associated with the inorganic lattice. On the other hand, the configurational entropy due to CH3NH3+ rotational degrees of freedom is slightly more favored in the cubic phase and amounts to less than 0.2% of the T = 0 K free-energy difference between the two phases.

Rotational dynamics of organic cations in the CH3NH3PbI3 perovskite.

Methylammonium lead iodide (CH3NH3PbI3) based solar cells have shown impressive power conversion efficiencies of above 20%. However, the microscopic mechanism of the high photovoltaic performance is yet to be fully understood. Particularly, the dynamics of CH3NH3(+) cations and their impact on relevant processes such as charge recombination and exciton dissociation are still poorly understood. Here, using elastic and quasi-elastic neutron scattering techniques and group theoretical analysis, we studied rotational modes of the CH3NH3(+) cation in CH3NH3PbI3. Our results show that, in the cubic (T > 327 K) and tetragonal (165 K < T < 327 K) phases, the CH3NH3(+) ions exhibit four-fold rotational symmetry of the C-N axis (C4) along with three-fold rotation around the C-N axis (C3), while in the orthorhombic phase (T < 165 K) only C3 rotation is present. At around room temperature, the characteristic relaxation times for the C4 rotation are found to be τC4 ≈ 5 ps while for the C3 rotation τC3 ≈ 1 ps. The T-dependent rotational relaxation times were fitted with Arrhenius equations to obtain activation energies. Our data show a close correlation between the C4 rotational mode and the temperature dependent dielectric permittivity. Our findings on the rotational dynamics of CH3NH3(+) and the associated dipole have important implications for understanding the low exciton binding energy and a slow charge recombination rate in CH3NH3PbI3 which are directly relevant for the high solar cell performance.

Structure of methylammonium lead iodide within mesoporous titanium dioxide: active material in high-performance perovskite solar cells.

We report the structure of methylammonium lead(II) iodide perovskite in mesoporous TiO2, as used in high-performance solar cells. Pair distribution function analysis of X-ray scattering reveals a two component nanostructure: one component with medium range crystalline order (30 atom %) and another with only local structural coherence (70 atom %). The nanostructuring correlates with a blueshift of the absorption onset and increases the photoluminescence. Our findings underscore the importance of fully characterizing and controlling the structure for improved solar cell efficiency.

Heterojunction PbS nanocrystal solar cells with oxide charge-transport layers.

Oxides are commonly employed as electron-transport layers in optoelectronic devices based on semiconductor nanocrystals, but are relatively rare as hole-transport layers. We report studies of NiO hole-transport layers in PbS nanocrystal photovoltaic structures. Transient fluorescence experiments are used to verify the relevant energy levels for hole transfer. On the basis of these results, planar heterojunction devices with ZnO as the photoanode and NiO as the photocathode were fabricated and characterized. Solution-processed devices were used to systematically study the dependence on nanocrystal size and achieve conversion efficiency as high as 2.5%. Optical modeling indicates that optimum performance should be obtained with thinner oxide layers than can be produced reliably by solution casting. Room-temperature sputtering allows deposition of oxide layers as thin as 10 nm, which enables optimization of device performance with respect to the thickness of the charge-transport layers. The best devices achieve an open-circuit voltage of 0.72 V and efficiency of 5.3% while eliminating most organic material from the structure and being compatible with tandem structures.

Ligand exchange and the stoichiometry of metal chalcogenide nanocrystals: spectroscopic observation of facile metal-carboxylate displacement and binding.

We demonstrate that metal carboxylate complexes (L-M(O2CR)2, R = oleyl, tetradecyl, M = Cd, Pb) are readily displaced from carboxylate-terminated ME nanocrystals (ME = CdSe, CdS, PbSe, PbS) by various Lewis bases (L = tri-n-butylamine, tetrahydrofuran, tetradecanol, N,N-dimethyl-n-butylamine, tri-n-butylphosphine, N,N,N',N'-tetramethylbutylene-1,4-diamine, pyridine, N,N,N',N'-tetramethylethylene-1,2-diamine, n-octylamine). The relative displacement potency is measured by (1)H NMR spectroscopy and depends most strongly on geometric factors such as sterics and chelation, although also on the hard/soft match with the cadmium ion. The results suggest that ligands displace L-M(O2CR)2 by cooperatively complexing the displaced metal ion as well as the nanocrystal. Removal of up to 90% of surface-bound Cd(O2CR)2 from CdSe and CdS nanocrystals decreases the Cd/Se ratio from 1.1 ± 0.06 to 1.0 ± 0.05, broadens the 1S(e)-2S(3/2h) absorption, and decreases the photoluminescence quantum yield (PLQY) from 10% to <1% (CdSe) and from 20% to <1% (CdS). These changes are partially reversed upon rebinding of M(O2CR)2 at room temperature (∼60%) and fully reversed at elevated temperature. A model is proposed in which electron-accepting M(O2CR)2 complexes (Z-type ligands) reversibly bind to nanocrystals, leading to a range of stoichiometries for a given core size. The results demonstrate that nanocrystals lack a single chemical formula, but are instead dynamic structures with concentration-dependent compositions. The importance of these findings to the synthesis and purification of nanocrystals as well as ligand exchange reactions is discussed.

A hot electron-hole pair breaks the symmetry of a semiconductor quantum dot.

The best-understood property of semiconductor quantum dots (QDs) is the size-dependent optical transition energies due to the quantization of charge carriers near the band edges. In contrast, much less is known about the nature of hot electron-hole pairs resulting from optical excitation significantly above the bandgap. Here, we show a transient Stark effect imposed by a hot electron-hole pair on optical transitions in PbSe QDs. The hot electron-hole pair does not behave as an exciton, but more bulk-like as independent carriers, resulting in a transient and varying dipole moment which breaks the symmetry of the QD. As a result, we observe redistribution of optical transition strength to dipole forbidden transitions and the broadening of dipole-allowed transitions during the picosecond lifetime of the hot carriers. The magnitude of symmetry breaking scales with the amount of excess energy of the hot carriers, diminishes as the hot carriers cool down and disappears as the hot electron-hole pair becomes an exciton. Such a transient Stark effect should be of general significance to the understanding of QD photophysics above the bandgap.

Interface-induced nucleation, orientational alignment and symmetry transformations in nanocube superlattices.

The self-assembly of colloidal nanocrystals into ordered superstructures depends critically on the shape of the nanocrystal building blocks. We investigated the self-assembly of cubic PbSe nanocrystals from colloidal suspensions in real-time using in situ synchrotron-based X-ray scattering. We combined small-angle and wide-angle scattering to investigate the translational ordering of nanocrystals and their orientational ordering in the lattice sites, respectively. We found that cubic PbSe nanocrystals assembled into a face-up (i.e., [100] normal to the interface) configuration at the liquid/substrate interface whereas nanocubes at the liquid/air interface assume a corner-up (i.e., [111] normal to the interface) configuration. The latter nanocrystal superlattice displays polymorphism as a function inter-NC separation distance. We explain the observed superlattice structure polymorphs in terms of the interactions directing the self-assembly. Insights into the directed self-assembly of superlattices gained from this study have important implication on the future development of nanocrystals as building blocks in artificial solids.