Assessing the Preservation of Lumbar Lordotic Curvature in Everyday Sitting Conditions Assessed with an Inertial Measurement System.

Background/Objectives: Lumbar lordotic curvature (LLC), closely associated with low back pain (LBP) when decreased, is infrequently assessed in clinical settings due to the spatiotemporal limitations of radiographic methods. To overcome these constraints, this study used an inertial measurement system to compare the magnitude and maintenance of LLC across various sitting conditions, categorized into three aspects: verbal instructions, chair type, and desk task types. Methods: Twenty-nine healthy participants were instructed to sit for 3 min with two wireless sensors placed on the 12th thoracic vertebra and the 2nd sacral vertebra. The lumbar lordotic angle (LLA) was measured using relative angles for the mediolateral axis and comparisons were made within each sitting category. Results: The maintenance of LLA (LLAdev) was significantly smaller when participants were instructed to sit upright (-3.7 ± 3.9°) compared to that of their habitual sitting posture (-1.2 ± 2.4°) (p = 0.001), while the magnitude of LLA (LLAavg) was significantly larger with an upright sitting posture (p = 0.001). LLAdev was significantly larger when using an office chair (-0.4 ± 1.1°) than when using a stool (-3.2 ± 7.1°) (p = 0.033), and LLAavg was also significantly larger with the office chair (p < 0.001). Among the desk tasks, LLAavg was largest during keyboard tasks (p < 0.001), followed by mouse and writing tasks; LLAdev showed a similar trend without statistical significance (keyboard, -1.2 ± 3.0°; mouse, -1.8 ± 2.2°; writing, -2.9 ± 3.1°) (p = 0.067). Conclusions: Our findings suggest that strategies including the use of an office chair and preference for computer work may help preserve LLC, whereas in the case of cueing, repetition may be necessary.

Use of functional magnetic resonance imaging to identify cortical loci for lower limb movements and their efficacy for individuals after stroke.

BACKGROUND: Identification of cortical loci for lower limb movements for stroke rehabilitation is crucial for better rehabilitation outcomes via noninvasive brain stimulation by targeting the fine-grained cortical loci of the movements. However, identification of the cortical loci for lower limb movements using functional MRI (fMRI) is challenging due to head motion and difficulty in isolating different types of movement. Therefore, we developed a custom-made MR-compatible footplate and leg cushion to identify the cortical loci for lower limb movements and conducted multivariate analysis on the fMRI data. We evaluated the validity of the identified loci using both fMRI and behavioral data, obtained from healthy participants as well as individuals after stroke. METHODS: We recruited 33 healthy participants who performed four different lower limb movements (ankle dorsiflexion, ankle rotation, knee extension, and toe flexion) using our custom-built equipment while fMRI data were acquired. A subgroup of these participants (Dataset 1; n = 21) was used to identify the cortical loci associated with each lower limb movement in the paracentral lobule (PCL) using multivoxel pattern analysis and representational similarity analysis. The identified cortical loci were then evaluated using the remaining healthy participants (Dataset 2; n = 11), for whom the laterality index (LI) was calculated for each lower limb movement using the cortical loci identified for the left and right lower limbs. In addition, we acquired a dataset from 15 individuals with chronic stroke for regression analysis using the LI and the Fugl-Meyer Assessment (FMA) scale. RESULTS: The cortical loci associated with the lower limb movements were hierarchically organized in the medial wall of the PCL following the cortical homunculus. The LI was clearer using the identified cortical loci than using the PCL. The healthy participants (mean ± standard deviation: 0.12 ± 0.30; range: - 0.63 to 0.91) exhibited a higher contralateral LI than the individuals after stroke (0.07 ± 0.47; - 0.83 to 0.97). The corresponding LI scores for individuals after stroke showed a significant positive correlation with the FMA scale for paretic side movement in ankle dorsiflexion (R2 = 0.33, p = 0.025) and toe flexion (R2 = 0.37, p = 0.016). CONCLUSIONS: The cortical loci associated with lower limb movements in the PCL identified in healthy participants were validated using independent groups of healthy participants and individuals after stroke. Our findings suggest that these cortical loci may be beneficial for the neurorehabilitation of lower limb movement in individuals after stroke, such as in developing effective rehabilitation interventions guided by the LI scores obtained for neuronal activations calculated from the identified cortical loci across the paretic and non-paretic sides of the brain.

Myxomatous mitral valve disease and associated pulmonary hypertension might increase serum angiopoietin-2 in dogs.

OBJECTIVE: To evaluate the relationships between the severity of myxomatous mitral valve disease (MMVD) and pulmonary hypertension (PH) and serum angiopoietin (Ang)-1 and Ang-2 concentrations in dogs with MMVD. ANIMALS: 74 dogs (control, n = 12; MMVD, n = 62) were included. METHODS: Serum Ang-1 and Ang-2 concentrations were estimated using the canine-specific ELISA kit. The concentrations were compared between dogs with MMVD and healthy dogs, and they were analyzed according to the severity of MMVD and PH. RESULTS: The median serum Ang-1 concentration did not differ among the study groups. The median serum Ang-2 concentration was higher in dogs with stage B2 MMVD (P = .041) and acute congestive heart failure (P = .002) than in control dogs. In addition, the median serum Ang-2 concentration was higher in MMVD dogs with PH than in those without PH (P = .031). Serum Ang-2 concentration was correlated with vertebral heart score (rs = 0.36, P = .004) and vertebral left atrial score (r = 0.50, P < .001) in dogs with MMVD, and correlated with vertebral heart score (r = 0.63, P = .01), maximum E wave amplitude of the diastolic transmitral flow (rs = 0.61, P = .018), ejection fraction (rs = -0.77, P < .001) and fractional shortening (rs = -0.56, P = .032) in dogs with acute congestive heart failure. CLINICAL RELEVANCE: Circulating Ang-2 levels increase in dogs with the severity of MMVD and the presence of PH.

Discrimination of metal contaminant sources in river sediments influenced by mining and smelting activities using stable Pb and Zn isotopes.

To determine the sources and pathways of lead (Pb) and zinc (Zn) in river sediments contaminated with metals from mining and smelting activities, metal concentrations and Pb and Zn isotope ratios were measured in river water and sediment, and potential metal contaminant samples (imported Zn concentrates, smelting wastes, soils around the smelter, mine ores, and riverside tailings). Zn and cadmium (Cd) concentrations in river water and sediment samples were 30- and 11-25-fold higher, respectively, near the smelter than upstream, while a 6-fold increase in sediment Pb concentrations was detected over the same region. Sediment samples near the smelter (207Pb/206Pb = 0.8638 and 208Pb/206Pb = 2.0960) were observed to have a different Pb isotopic composition from upstream of the smelter (207Pb/206Pb = 0.8322 and 208Pb/206Pb = 2.0502), with δ66Zn values increasing from -0.01 to 0.82‰. Analysis of Pb and Zn isotopes and concentrations revealed that dust-contaminated soils were a major Pb source, and baseline sediments were found to be contaminated by regional mining tailings. For Zn in sediments, the main Zn sources were groundwater-derived Zn (δ66Zn = 1.02 ± 0.43‰, n = 4), dust-contaminated soils (δ66Zn = -0.18 ± 0.08‰, n = 3), and tailings-contaminated sediments (δ66Zn = 0.01 ± 0.07‰, n = 10). Endmember mixing model results showed that dust-contaminated soils contributed 78% and 64% of sediment Pb and Zn, respectively, within 2 km of the Zn smelter, decreasing to negligible levels after 47.1 km downstream. Downstream of the smelter, groundwater-derived Zn contributed 54% of sediment Zn, whereas tailings contaminated sediments contributed 70% and 25% of Pb and Zn, respectively.

Recent Progress on Quantum Dot Patterning Technologies for Commercialization of QD-LEDs: Current Status, Future Prospects, and Exploratory Approaches.

Colloidal quantum dots (QDs) are widely regarded as advanced emissive materials with significant potential for display applications owing to their excellent optical properties such as high color purity, near-unity photoluminescence quantum yield, and size-tunable emission color. Building upon these attractive attributes, QDs have successfully garnered attention in the display market as down-conversion luminophores and now venturing into the realm of self-emissive displays, exemplified by QD light-emitting diodes (QD-LEDs). However, despite these advancements, there remains a relatively limited body of research on QD patterning technologies, which are crucial prerequisites for the successful commercialization of QD-LEDs. Thus, in this review, an overview of the current status and prospects of QD patterning technologies to accelerate the commercialization of QD-LEDs is provided. Within this review, a comprehensive investigation of three prevailing patterning methods: optical lithography, transfer printing, and inkjet printing are conducted. Furthermore, several exploratory QD patterning techniques that offer distinct advantages are introduced. This study not only paves the way for successful commercialization but also extends the potential application of QD-LEDs into uncharted frontiers.

A multi-layered network model identifies Akt1 as a common modulator of neurodegeneration.

The accumulation of misfolded and aggregated proteins is a hallmark of neurodegenerative proteinopathies. Although multiple genetic loci have been associated with specific neurodegenerative diseases (NDs), molecular mechanisms that may have a broader relevance for most or all proteinopathies remain poorly resolved. In this study, we developed a multi-layered network expansion (MLnet) model to predict protein modifiers that are common to a group of diseases and, therefore, may have broader pathophysiological relevance for that group. When applied to the four NDs Alzheimer's disease (AD), Huntington's disease, and spinocerebellar ataxia types 1 and 3, we predicted multiple members of the insulin pathway, including PDK1, Akt1, InR, and sgg (GSK-3ß), as common modifiers. We validated these modifiers with the help of four Drosophila ND models. Further evaluation of Akt1 in human cell-based ND models revealed that activation of Akt1 signaling by the small molecule SC79 increased cell viability in all models. Moreover, treatment of AD model mice with SC79 enhanced their long-term memory and ameliorated dysregulated anxiety levels, which are commonly affected in AD patients. These findings validate MLnet as a valuable tool to uncover molecular pathways and proteins involved in the pathophysiology of entire disease groups and identify potential therapeutic targets that have relevance across disease boundaries. MLnet can be used for any group of diseases and is available as a web tool at http://ssbio.cau.ac.kr/software/mlnet.

Integrated metasurfaces for re-envisioning a near-future disruptive optical platform.

Metasurfaces have been continuously garnering attention in both scientific and industrial fields, owing to their unprecedented wavefront manipulation capabilities using arranged subwavelength artificial structures. To date, research has mainly focused on the full control of electromagnetic characteristics, including polarization, phase, amplitude, and even frequencies. Consequently, versatile possibilities of electromagnetic wave control have been achieved, yielding practical optical components such as metalenses, beam-steerers, metaholograms, and sensors. Current research is now focused on integrating the aforementioned metasurfaces with other standard optical components (e.g., light-emitting diodes, charged-coupled devices, micro-electro-mechanical systems, liquid crystals, heaters, refractive optical elements, planar waveguides, optical fibers, etc.) for commercialization with miniaturization trends of optical devices. Herein, this review describes and classifies metasurface-integrated optical components, and subsequently discusses their promising applications with metasurface-integrated optical platforms including those of augmented/virtual reality, light detection and ranging, and sensors. In conclusion, this review presents several challenges and prospects that are prevalent in the field in order to accelerate the commercialization of metasurfaces-integrated optical platforms.

Transient distal renal tubular acidosis with nephrogenic diabetes insipidus after general anaesthesia in a dog.

A 3-year-old, 3.5 kg, female spayed Pomeranian was referred due to persistent vomiting, anorexia, polyuria and polydipsia, 7 days after receiving general anaesthetic for a medial patellar luxation correction. Physical examination revealed lethargy, tachypnoea and 7% dehydration. Complete blood count and serum chemistry results were unremarkable, and venous blood gas analysis revealed hypokalaemia and hyperchloraemic metabolic acidosis with a normal anion gap. Urinalysis revealed a urine specific gravity (USG) of 1.005, pH of 7.0 and proteinuria, and the bacterial culture was negative. Based on these results, the dog was diagnosed with distal renal tubular acidosis, and potassium citrate was prescribed to correct metabolic acidosis. In addition, concurrent diabetes insipidus (DI) was suspected because the dog showed persistent polyuria, polydipsia and a USG below 1.006 despite dehydration. After 3 days of initial treatment, acidosis was corrected, and vomiting resolved. Desmopressin acetate and hydrochlorothiazide were also prescribed for DI, but the USG was not normalized. Based on the insignificant therapeutic response, nephrogenic DI was highly suspected. DI was resolved after 24 days. This case report describes the concomitant presence of RTA and DI in a dog after general anaesthesia.

MicroRNA miR-252-5p regulates the Notch signaling pathway by targeting Rab6 in Drosophila wing development.

The Notch signaling pathway plays a central role in the development of various organisms. However, dysregulation of microRNAs (miRNAs), which are crucial regulators of gene expression, can disrupt signaling pathways at all stages of development. Although Notch signaling is involved in wing development in Drosophila, the mechanism underlying miRNA-based regulation of the Notch signaling pathway is unclear. Here, we report that loss of Drosophila miR-252 increases the size of adult wings, whereas the overexpression of miR-252 in specific compartments of larval wing discs leads to patterning defects in the adult wings. The miR-252 overexpression-induced wing phenotypes were caused by aberrant Notch signaling with intracellular accumulation of the full-length Notch receptor during development, which could be due to defects in intracellular Notch trafficking associated with its recycling to the plasma membrane and autophagy-mediated degradation. Moreover, we identified Rab6 as a direct target of miR-252-5p; Rab6 encodes a small Ras-like GTPase that regulates endosomal trafficking pathways. Consistent with this finding, RNAi-mediated downregulation of Rab6 led to similar defects in both wing patterning and Notch signaling. Notably, co-overexpression of Rab6 completely rescued the wing phenotype associated with miR-252 overexpression, further supporting that Rab6 is a biologically relevant target of miR-252-5p in the context of wing development. Thus, our data indicate that the miR-252-5p-Rab6 regulatory axis is involved in Drosophila wing development by controlling the Notch signaling pathway.

Algorithm for environmental risk assessment of cosmetics to reduce their environmental impact.

Cosmetics, especially rinse-off personal care products (PCPs), such as shampoo, facial cleanser, and body wash, are composed of various chemicals and are one of the sources of chemicals released into aquatic ecosystems. Therefore, the cosmetic industry strives to reduce the impact of their products on the aquatic environment. In this study, we proposed an algorithm based on persistence, bioaccumulation potential, and toxicity (PBT) for the environmental risk assessment of cosmetics. PBT features are generally used in the evaluation of the environmental impact of chemicals. Based on the PBT assessment, it is possible to predict the short- and long-term effects of chemicals on the environment. Our algorithm derives substance and product scores from PBT features, allowing for the risk assessment of each ingredient in the product. Furthermore, we proposed a criterion for the environmental impact grade through which each component can be classified. We intend to use this grade and factors determined through the algorithm to manufacture products with low environmental impact.

Evaluation of serum miR-216a and miR-375 as biomarkers in dogs with acute pancreatitis.

BACKGROUND: Serum microRNAs have emerged as biomarkers of various diseases. Overexpression of serum miR-216a and miR-375 occurs in dogs with experimentally induced acute pancreatitis (AP). OBJECTIVES: To identify the possibility of using serum miR-216a and miR-375 as biomarkers for the diagnosis and evaluation of treatment response in dogs with naturally occurring AP. ANIMALS: Twenty-one dogs with AP and 20 healthy dogs. METHODS: Cross-sectional study. The relative expression of serum hsa-miR-216a-5p, cfa-miR-216a, and cfa-miR-375 were analyzed using reverse transcription and real-time PCR. RESULTS: A significant difference in the serum expression of cfa-miR-375 was found between dogs with AP (median [interquartile range] 3.59 [1.55-24.52]-fold) and healthy dogs (0.81 [0.54-2.21]-fold, P < .001), and no significant differences were observed in hsa-miR-216a-5p and cfa-miR-216a (P > .05). The area under the receiver operating characteristic curve of serum cfa-miR-375 for differentiating between AP dogs and healthy dogs was 0.84 (95% confidence interval [CI]: 0.71-0.96). The expressions of hsa-miR-216a-5p and cfa-miR-375 were positively correlated with the concentrations of serum C-reactive protein (rs  = .46, rs  = .48, respectively), but not with the serum specific canine pancreatic lipase. The expression of cfa-miR-375 was significantly less after treatment in dogs with AP (P = .02). CONCLUSIONS AND CLINICAL IMPORTANCE: Serum cfa-miR-375 could be a potential biomarker for the diagnosis and evaluation of treatment response of AP in dogs. In addition, miR-216a and miR-375 could be associated with inflammatory processes in dogs with AP.

High Expression of PRNP Predicts Poor Prognosis in Korean Patients with Gastric Cancer.

Gastric cancer (GC) has the highest occurrence and fourth-highest mortality rate of all cancers in Korea. Although survival rates are improving with the development of diagnosis and treatment methods, the five-year survival rate for stage 4 GC in Korea remains <10%. Therefore, it is important to identify candidate prognostic factors for predicting poor prognosis. PRNP is a gene encoding the prion protein PrP, which has been noted for its role in the nervous system and is known to be upregulated in various cancers and associated with both cell proliferation and metastasis. However, the value of PRNP as a prognostic factor for Korean GC patients remains unclear. Here, we analyzed the relationship between PRNP expression and survival in three independent datasets for Korean patients with GC as well as the TCGA-STAD dataset. Survival analysis indicates that high levels of PRNP expression are associated with poor overall survival of patients with GC. Gene set enrichment analysis showed that PRNP is associated with epithelial mesenchymal transition and Hedgehog signaling. In addition, proliferation of GC cell lines was inhibited after siRNA-mediated knockdown of PRNP. In conclusion, our study suggests a potential role for PRNP as a candidate prognostic factor for patients with GC.

Development of self-microemulsifying tablets containing dutasteride for enhanced dissolution and pharmacokinetic profile.

This study aimed to develop self-microemulsifying tablets containing the hydrophobic drug dutasteride for easy administration and high in vivo absorption. The candidate lipids and surfactants were formulated into a self-microemulsifying drug delivery system (SMEDDS), and their mean droplet size upon dilution was evaluated. The SMEDDS containing Capmul® MCM, Captex® 355, and Cremophor® EL showed improved dissolution in the gastric medium when compared to the dissolution of the conventional product (Avodart®) and the raw drug. Among the various porous silicon microparticles for solidifying SMEDDS, Neusilin® US2 showed favorable properties in terms of maximum adsorption capacity, powder flow, and compaction. However, the amount of drug released from the solidified SMEDDS after the adsorption process was lower than that of liquid SMEDDS, indicating incomplete desorption. After observing the effect of the solid-to-liquid ratio and pre-filling the pores with blank SMEDDS, complete desorption was obtained when the pores were first adsorbed with polyvinylpyrrolidone. The self-microemulsifying tablets exhibited improved bioavailability (29.9% and 15.2%) compared to the conventional soft gelatin product. Therefore, the proposed system could successfully solubilize the hydrophobic drug while maintaining rapid and complete desorption from the solid carrier, resulting in enhanced in vivo performance.

Characteristics and outcomes of L-shaped and reverse L-shaped rotator cuff tears.

AIMS: The aim of this study was to compare the characteristics and outcomes of L-shaped and reverse L-shaped rotator cuff tears. METHODS: A total of 82 shoulders (81 patients) after arthroscopic rotator cuff repair were retrospectively enrolled. The mean age of the patients was 62 years (SD 6), 33 shoulders (40.2%) were in male patients, and 57 shoulders (69.5%) were the right shoulder. Of these, 36 shoulders had an L-shaped tear (group L) and 46 had a reverse L-shaped tear (group RL). Both groups were compared regarding characteristics, pre- and postoperative pain, and functional outcomes. Muscle status was assessed by preoperative MRI, and re-tear rates by postoperative ultrasonography or MRI. RESULTS: Patients in group RL were significantly older than in group L (p = 0.008), and group RL was significantly associated with female sex (odds ratio 2.5 (95% confidence interval 1.03 to 6.32); p = 0.041). Mean postoperative pain visual analogue scale (VAS) score was significantly greater (group L = 0.8 (SD 1.5), group RL = 1.7 (SD 2.2); p = 0.033) and mean postoperative American Shoulder and Elbow Surgeons (ASES) score was significantly lower in group RL than group L (group L = 91.4 (SD 13.1), group RL = 83.8 (SD 17.9); p = 0.028). However, postoperative mean VAS for pain and ASES score were not lower than the patient-acceptable symptom state scores. Mean retracted tear length was significantly larger in group L (group L = 24.6 mm (SD 6.5), group RL = 20.0 mm (SD 6.8); p = 0.003). Overall re-tear rate for 82 tears was 11.0% (nine shoulders), and re-tear rates in group L and RL were similar at 11.1% (four shoulders) and 10.9% (five shoulders), respectively (p = 1.000). No significant intergroup difference was found for fatty degeneration (FD) or muscle atrophy. Within group L, postoperative FD grades of supraspinatus and subscapularis worsened significantly (p = 0.034 and p = 0.008, respectively). Mean postoperative pain VAS (male = 1.2 (SD 1.8), female = 1.3 (SD 2.0)) and ASES scores (male = 88.7 (SD 15.5), female = 86.0 (SD 16.8)) were similar in male and female patients (p = 0.700 and p = 0.475, respectively). Regression analysis showed age was not a prognostic factor of postoperative pain VAS or ASES scores (p = 0.188 and p = 0.150, respectively). CONCLUSION: Older age and female sex were associated with reverse L-shaped tears. Although the postoperative functional outcomes of patients with reverse L-shaped tears were satisfactory, the clinical scores were poorer than those of patients with L-shaped tears. Surgeons should be aware of the differences in clinical outcome between L-shaped and reverse L-shaped rotator cuff tears. Cite this article: Bone Joint J 2022;104-B(3):394-400.

Wearable Strain Sensors with Aligned Macro Carbon Cracks Using a Two-Dimensional Triaxial-Braided Fabric Structure for Monitoring Human Health.

Recently, wearable sensors, due to their ability to exhibit characteristics, have been appealing for health monitoring through detection of human motions and vital signals. The development of strain sensors with high sensing performance and wearability has been a great challenge to date. In this study, a textile-based strain sensor with good skin affinity was fabricated through a simple fabrication process of dip-coating 2D triaxial-braided fabrics using carbon ink and then drying. The macro crack aligned on the 2D triaxial-braided fabric with a high-density structure and good recovery force. The sensitivity of textile-based strain sensor can be enhanced due to aligned macro crack formed by prestrained fabricating process and characteristic of the 2D triaxial braided fabric with high dense structure. The optimized sensor exhibits high sensitivity (gauge factor: 128) in a strain range of 0-30%, durability (5000 cycles), washability, low hysteresis, and fast response time (90 ms). Therefore, it can be applied as a wearable sensor that can monitor human motions (large strain) and biosignals (subtle strain).

Solution-Processed MoS2 Film with Functional Interfaces via Precursor-Assisted Chemical Welding.

Molybdenum disulfide (MoS2) presents fascinating properties for next-generation applications in diverse fields. However, fully exploiting the best properties of MoS2 in largescale practical applications still remains a challenge due to lack of proper processing methods. Solution-based processing can be a promising route for scalable production of MoS2 nanosheets, but the resulting assembled film possesses an enormous number of interfaces that significantly compromise the intrinsic electrical properties. Herein, we demonstrate the solution processing of MoS2 and subsequent precursor-assisted chemical welding to form defective MoS2-x at the nanosheet interfaces. The formation of defective MoS2-x significantly reduces the electrical contact resistances, and thus the chemically welded MoS2 film exhibits more than 2 orders of magnitude improved electrical conductivity. Furthermore, the chemical welding provides MoS2-x interface induced additional defect originated functionalities for diverse applications such as broadband photodetection over the near-infrared range and improved electrocatalytic activity for hydrogen evolution reactions. Overall, this precursor-assisted chemical welding strategy can be a facile route to produce high-quality MoS2 films with low-quality defective MoS2-x at the interfaces having multifunctionalities in electronics, optoelectronics, and electrocatalysis.

The conserved microRNA miR-8-3p coordinates the expression of V-ATPase subunits to regulate ecdysone biosynthesis for Drosophila metamorphosis.

The steroid hormone ecdysone is the central regulator of insect metamorphosis, during which a growing, immature larva is remodeled, through pupal stages, to a reproductive adult. However, the underlying mechanisms of ecdysone-mediated metamorphosis remain to be fully elucidated. Here, we identified metamorphosis-associated microRNAs (miRNAs) and their potential targets by cross-linking immunoprecipitation coupled with deep sequencing of endogenous Argonaute 1 protein in Drosophila. Interestingly, miR-8-3p targeted five Vha genes encoding distinct subunits of vacuolar H+ -ATPase (V-ATPase), which has a vital role in the organellar acidification. The expression of ecdysone-responsive miR-8-3p is normally downregulated during Drosophila metamorphosis, but temporary overexpression of miR-8-3p in the whole body at the end of larval development led to defects in metamorphosis and survival, hallmarks of aberrant ecdysone signaling. In addition, miR-8-3p was expressed in the prothoracic gland (PG), which produces and releases ecdysone in response to prothoracicotropic hormone (PTTH). Notably, overexpression of miR-8-3p or knockdown of its Vha targets in the PG resulted in larger than normal, ecdysone-deficient larvae that failed to develop into the pupal stage but could be rescued by ecdysone feeding. Moreover, these animals showed defective PTTH signaling with a concomitant decrease in the expression of ecdysone biosynthetic genes. We also demonstrated that the regulatory network between the conserved miR-8-3p/miR-200 family and V-ATPase was functional in human cells. Consequently, our data indicate that the coordinated regulation of V-ATPase subunits by miR-8-3p is involved in Drosophila metamorphosis by controlling the ecdysone biosynthesis.

Application of Spectro-DPRA, KeratinoSens™ and h-CLAT to estimation of the skin sensitization potential of cosmetics ingredients.

Ethical issues in animal toxicity testing have led to the search for alternative methods to determine the skin sensitization potential of cosmetic products. The emergence of ethical testing issues has led to the development of many alternative methods that can reliably estimate skin sensitization potentials. However, a single alternative method may not be able to achieve high predictivity due to the complexity of the skin sensitization mechanism. Therefore, several prediction assays, including both in chemico and in vitro test methods, were investigated and integrated based on the skin sensitization adverse outcome pathway. In this study, we evaluated three different integrated approaches to predict a human skin sensitization hazard using data from in vitro assays (KeratinoSens™ and human cell line activation test [h-CLAT]), and a newly developed in chemico assay (spectrophotometric direct peptide reactivity assay [Spectro-DPRA]). When the results of the in chemico and in vitro assays were combined, the predictivity of human data increased compared with that of a single assay. The highest predictivity was obtained for the approach in which sensitization potential was determined by Spectro-DPRA followed by final determination using the result of KeratinoSens™ and h-CLAT assays (96.3% sensitivity, 87.1% specificity, 86.7% positive predictive value, 96.4% negative predictive value and 91.4% accuracy compared with human data). While further optimization is needed, we believe this integrated approach may provide useful predictive data when determining the human skin sensitization potential of chemicals.

First-Principles Study of Anisotropic Oxygen Diffusion in PrBaCo2O5.5.

We address the anisotropic oxygen diffusion in PrBaCo2O5.5 using first-principles calculations based on the density functional theory. First, the experimentally observed magnetic properties such as ferromagnetic, ferrimagnetic, and paramagnetic phases are examined through systematic consideration of cobalt spin ordering and oxygen vacancy position. Then, the diffusion mechanism of an oxygen atom, assumed to be externally supplied, is explored by evaluating the oxygen migration barriers with the formation of one-dimensional oxygen-vacancy channel.

Bioresorbable pressure sensors protected with thermally grown silicon dioxide for the monitoring of chronic diseases and healing processes.

Pressures in the intracranial, intraocular and intravascular spaces are clinically useful for the diagnosis and management of traumatic brain injury, glaucoma and hypertension, respectively. Conventional devices for measuring these pressures require surgical extraction after a relevant operational time frame. Bioresorbable sensors, by contrast, eliminate this requirement, thereby minimizing the risk of infection, decreasing the costs of care and reducing distress and pain for the patient. However, the operational lifetimes of bioresorbable pressure sensors available at present fall short of many clinical needs. Here, we present materials, device structures and fabrication procedures for bioresorbable pressure sensors with lifetimes exceeding those of previous reports by at least tenfold. We demonstrate measurement accuracies that compare favourably to those of the most sophisticated clinical standards for non-resorbable devices by monitoring intracranial pressures in rats for 25 days. Assessments of the biodistribution of the constituent materials, complete blood counts, blood chemistry and magnetic resonance imaging compatibility confirm the biodegradability and clinical utility of the device. Our findings establish routes for the design and fabrication of bioresorbable pressure monitors that meet requirements for clinical use.