Internet of Things-Enabled Patch With Built-in Microsensors and Wireless Chip: Real-Time Remote Monitoring of Patch Treatment.

Purpose: We aimed to design, develop, and evaluate an internet of things-enabled patch (IoT patch) for real-time remote monitoring of adherence (or patch wear time) during patch treatment in child participants in clinical trials. This study provides healthcare providers with a tool for objective, real-time, and remote assessment of adherence and for making required adjustments to treatment plans. Methods: The IoT patch had two temperature microsensors and a wireless chip. One sensor was placed closer to the skin than the other, resulting in a temperature difference depending on whether the patch was worn. When the patch was worn, it measured temperatures every 30 seconds and transmitted temperature data to a cloud server via a mobile application every 15 seconds. The patch was evaluated via 2 experiments with 30 healthy adults and 40 children with amblyopia. Results: Excellent monitoring accuracy was observed in both adults (mean delay of recorded time data, 0.4 minutes) and children (mean, 0.5 minutes). The difference between manually recorded and objectively recorded patch wear times showed good agreement in both groups. Experiment 1 showed accurate monitoring over a wide range of temperatures (from 0 to 30°C). Experiment 2 showed no significant differences in wearability (ease-of-use and comfort scores) between the IoT and conventional patches. Conclusions: The IoT patch offers an accurate, real-time, and remote system to monitor adherence to patch treatment. The patch is comfortable and easy to use. The utilization of an IoT patch may increase adherence to patch treatment based on accurate monitoring. Translational Relevance: Results show that the IoT patch can enable real-time adherence monitoring in clinical trials, improving treatment precision, and patient compliance to enhance outcomes.

A Novel Zwitterion Incorporated Nano-Crystalline Ceramic and Polymer for Bacterial Resistant Dental CAD-CAM Block.

OBJECTIVES: To create bacteria-resistant dental CAD-CAM blocks with a biofilm-resistant effect by incorporating Nano-crystalline ceramic and polymer (NCP) with 2-methacryloyloxyethyl phosphorylcholine (MPC) and sulfobetaine methacrylate (SBMA) and at an equimolar ratio, referred to as MS. METHODS: Experimental groups comprised NCP blocks containing zwitterions at 0.15wt% (MS015) and 0.45wt% (MS045). NCP blocks without MS served as control (CTRL). Flexural strength, surface hardness, water sorption and solubility, photometric properties, and cytotoxicity were assessed for all samples. Additionally, the resistance to single and multi-species bacterial adhesion was investigated. RESULTS: MS045 showed significant reduction in flexural strength (P < 0.01) compared to both CTRL and MS015. Both MS015 and MS045 showed significantly increased water sorption and significant reduction in water solubility compared to CTRL. Light transmission remained consistent across all MS content levels, but the irradiance value decreased by 12% in the MS045 group compared to the MS015 group. Notably, compared to the CTRL group, the MS015 group exhibited enhanced resistance to adhesion by Porphyromonas gingivalis and a multi-species salivary biofilm, with biofilm thickness and biomass reduced by 45% and 56%, respectively. CONCLUSIONS: NCP containing 0.15% MS can effectively reduce adhesion of multiple species of bacteria while maintaining physical and mechanical properties. CLINICAL SIGNIFICANCE: NCP integrating zwitterions is clinically advantageous in resisting bacterial adhesion at internal and external margins of milled indirect restoration.

Anisotropic Liesegang pattern for the nonlinear elastic biomineral-hydrogel complex.

The Liesegang pattern is a beautiful natural anisotropic patterning phenomenon observed in rocks and sandstones. This study reveals that the Liesegang pattern can induce nonlinear elasticity. Here, a Liesegang-patterned complex with biomineral-hydrogel repetitive layers is prepared. This Liesegang-patterned complex is obtained only when the biomineralization is performed under the supersaturated conditions. The Liesegang-patterned complex features a nonlinear elastic response, whereas a complex with a single biomineral shell shows a linear behavior, thus demonstrating that the Liesegang pattern is essential in achieving nonlinear elasticity. The stiff biomineral layers have buffered the concentrated energy on behalf of soft hydrogels, thereby exposing the hydrogel components to reduced stress and, in turn, enabling them to perform the elasticity continuously. Moreover, the nonlinear elastic Liesegang-patterned complex exhibits excellent stress relaxation to the external loading, which is the biomechanical characteristic of cartilage. This stress relaxation allows the bundle of fiber-type Liesegang-patterned complex to endure greater deformation.

Spatiotemporal Niche Separation among Passeriformes in the Halla Mountain Wetland of Jeju, Republic of Korea: Insights from Camera Trap Data.

This study analyzed 5322 camera trap photographs from Halla Mountain Wetland, documenting 1427 independent bird sightings of 26 families and 49 species of Passeriformes. Key observations include morning activities in Cyanoptila cyanomelana and Horornis canturians and afternoon activity in Muscicapa dauurica and Phoenicurus auroreus. Wetlands were significantly preferred (P_i = 0.398) despite their smaller area, contrasting with underutilized grasslands (P_i = 0.181). Seasonal activity variations were notable, with overlap coefficients ranging from 0.08 to 0.81 across species, indicating diverse strategies in resource utilization and thermoregulation. Population density was found to be a critical factor in habitat usage, with high-density species showing more consistent activity patterns. The study's results demonstrate the ecological adaptability of Passeriformes in the Halla Mountain Wetland while highlighting the limitations of camera trapping methods. These limitations include their fixed field of view and intermittent recording capability, which may not fully capture the spectrum of complex avian behaviors. This research underlines the need for future studies integrating various methodologies, such as direct observation and acoustic monitoring, to gain a more comprehensive understanding of avian ecology.

Low concentration zinc oxide nanoparticles enrichment enhances bacterial and pro-inflammatory resistance of calcium silicate-based cements.

Calcium silicate-based cement (CSC) is a commonly used material in endodontic treatment. However, it has limited antibacterial activity, especially for cases involving primary infections. Zinc oxide nanoparticles (ZnO-NPs) are recognized for their potential in biomedical applications due to their antibacterial properties and ability to reduce inflammation. This study aims to optimize CSC by incorporating ZnO-NPs to maintain its physical properties, enhance its antibacterial activity, and reduce the production of pro-inflammatory cytokines. ZnO-NPs were integrated into a commercial CSC (Endocem MTA) at 1 wt% (CSZ1) or 3 wt% (CSZ3). Setting time, compressive strength, and X-ray diffraction were then measured. In addition, pH, calcium ion release, and zinc ion release were measured for 7 days. Antibacterial activity against Enterococcus faecalis and viability of murine macrophages (RAW264.7) were determined using colorimetric assays. Gene expression levels of pro-inflammatory cytokines in lipopolysaccharide induced RAW264.7 were evaluated using quantitative polymerase chain reaction. Results were compared to an unmodified CSC group. In the CSZ3 group, there was a significant increase of approximately 12% in setting time and a reduction of about 36.4% in compressive strength compared to the control and CSZ1 groups. The presence of ZnO-NPs was detected in both CSZ1 and CSZ3. Both CSC and CSZ1 groups maintained an alkaline pH and released calcium ions, while zinc ions were significantly released in the CSZ1 group. Additionally, CSZ1 showed a 1.8-fold reduction of bacterial activity and exhibited around 85% reduction in colony-forming units compared to the CSC group. Furthermore, the CSZ1 group showed a more than 39% reduction in pro-inflammatory cytokine levels compared to the CSC group. Thus, enriching CSC with 1 wt% ZnO-NPs can enhance its antibacterial activity and reduce pro-inflammatory cytokines without showing any tangible adverse effects on its physical properties.

Occlusive membranes for guided regeneration of inflamed tissue defects.

Guided bone regeneration aided by the application of occlusive membranes is a promising therapy for diverse inflammatory periodontal diseases. Symbiosis, homeostasis between the host microbiome and cells, occurs in the oral environment under normal, but not pathologic, conditions. Here, we develop a symbiotically integrating occlusive membrane by mimicking the tooth enamel growth or multiple nucleation biomineralization processes. We perform human saliva and in vivo canine experiments to confirm that the symbiotically integrating occlusive membrane induces a symbiotic healing environment. Moreover, we show that the membrane exhibits tractability and enzymatic stability, maintaining the healing space during the entire guided bone regeneration therapy period. We apply the symbiotically integrating occlusive membrane to treat inflammatory-challenged cases in vivo, namely, the open and closed healing of canine premolars with severe periodontitis. We find that the membrane promotes symbiosis, prevents negative inflammatory responses, and improves cellular integration. Finally, we show that guided bone regeneration therapy with the symbiotically integrating occlusive membrane achieves fast healing of gingival soft tissue and alveolar bone.

Dimensional accuracy, mechanical property, and optical stability of zirconia orthodontic bracket according to yttria proportions.

This in vitro study evaluated comprehensively the performances of zirconia brackets with varying yttria proportions in manufacturing advanced orthodontic brackets. Three experimental groups of zirconia brackets were fabricated using yttria-stabilized zirconia (YSZ) materials with different yttria proportions-3 mol% yttria (3Y-YSZ), 4 mol% yttria (4Y-YSZ), and 5 mol% yttria (5Y-YSZ) (Tosoh Ceramic, Japan). A polycrystalline alumina ceramic bracket (3M™ Clarity™ Advanced, MBT 0.022-in. slot) was employed as the control group. Morphological properties, including slot surface structure and dimensions, were examined using scanning electron microscopy and surface profiler analysis. Manufacturing accuracy was assessed with root mean square calculations of trueness and precision. Mechanical properties were tested, encompassing static and kinetic frictional resistance (FR) and fracture strength. Optical stability was evaluated through 20,000 cycles of thermocycling and a 7-day immersion in various coloring agents. Within the limitations of this study, zirconia brackets containing 3 to 5 mol% YSZ presented enhanced reliability in terms of dimensional accuracy and demonstrated favorable optical stability. Notably, owing to its advantageous mechanical properties, the 3Y-YSZ variant showed remarkable potential as an advanced material for fabricating orthodontic brackets.

A novel orthodontic adhesive containing zinc-doped phosphate-based glass for preventing white spot lesions.

OBJECTIVES: This study aimed at demonstrating the remineralization effect of the enamel around the brackets to aid reduction in white spot lesions (WSLs) with use of zinc-doped phosphate-based glass (Zn-PBG) containing orthodontic adhesives. METHODS: Zn-PBG powder was synthesized, and particle morphology, size, and density were evaluated. Orthodontic adhesives with increasing loading percentage of Zn-PBG powder were prepared: ZnPG3 (3 wt.%), ZnPG6 (6 wt.%), and ZnPG9 (9 wt.%). Brackets were bonded on the etched enamel surface and stored in distilled water (DW) for 1 h. Following, Shear bond strength (SBS) along with adhesive remnant index were analyzed. The release of calcium (Ca), phosphorus (P), and zinc (Zn) from adhesive specimens in DW was evaluated after 7, 15 and 30 days of immersion. The remineralization effect was confirmed by microhardness and surface morphology analysis with scanning electron microscopy. RESULTS: The SBS value was observed between 20 and 22 MPa on enamel surface. The concentration of Ca, P and Zn released in DW increased with loading percentage of Zn-PBG. The microhardness increased in the experimental groups after immersion in artificial saliva for 7 days. Apatite-like crystal formation was observed after 30 days in the ZnPG 9 group. CONCLUSIONS: The orthodontic adhesive containing Zn-PBG with an optimal SBS performance has an enamel remineralization effect, and therefore can aid in prevention of WSLs. CLINICAL SIGNIFICANCE: The orthodontic adhesive containing Zn-PBG is clinically advantageous as it can promote remineralization and resist the formation of WSLs that may occur during orthodontic therapy.

Quantitative light-induced fluorescence enables effective detection of orthodontic adhesive residues in diverse environments.

BACKGROUND: Adhesive remnants post-orthodontic treatment might have deleterious effects on oral health, including enamel demineralization, plaque accumulation, and elevated risk of caries development. The aim of this study was to identify and characterize adhesive residues in an ex vivo environment rich in salivary microbiota using quantitative light-induced fluorescence (QLF) technology. METHODS: Disc-shaped adhesive samples with thickness ranging from 800 to 100 µm were prepared using GC Ortho, GOTO, T Orthobond, and Transbond XT and subsequently evaluated utilizing a QLF system. Bovine teeth containing GC Ortho and GOTO adhesives and isolated human premolar teeth bonded with brackets were subjected to a 10-day incubation in an artificial saliva environment. Daily imaging was conducted using QLF during incubation. Data with ΔR > 30% and simple hygiene score (SHS) were obtained with a software for further analysis. RESULTS: Fluorescence intensity exhibited significant differences among the four orthodontic adhesives (p < 0.05). Results of incubation in artificial saliva revealed that red fluorescence surrounding the adhesive on the tooth surface was distinctly observable from day five onwards, with ΔR > 30% and SHS levels higher than those of the control group without adhesive (p < 0.05). Observation of fluorescence images of isolated human premolar teeth with bonded brackets indicated that red fluorescence was primarily present around the brackets. CONCLUSIONS: Application of QLF is efficacious in identifying and demarcating adhesive residues within an environment rich in salivary microbiota.

Effect of strontium substitution on functional activity of phosphate-based glass.

Phosphate-based glass (PBG) is a bioactive agent, composed of a glass network with phosphate as the primary component and can be substituted with various therapeutic ions for functional enhancement. Strontium (Sr) has been shown to stimulate osteogenic activity and inhibit pro-inflammatory responses. Despite this potential, there are limited studies that focus on the proportion of Sr substituted and its impact on the functional activity of resulting Sr-substituted PBG (PSr). In this study, focusing on the cellular biological response we synthesized and investigated the functional activity of PSr by characterizing its properties and comparing the effect of Sr substitution on cellular bioactivity. Moreover, we benchmarked the optimal composition against 45S5 bioactive glass (BG). Our results showed that PSr groups exhibited a glass structure and phosphate network like that of PBG. The release of Sr and P was most stable for PSr6, which showed favorable cell viability. Furthermore, PSr6 elicited excellent early osteogenic marker expression and inhibition of pro-inflammatory cytokine expression, which was significant compared to BG. In addition, compared to BG, PSr6 had markedly higher expression of osteopontin in immunocytochemistry, higher ALP expression in osteogenic media, and denser alizarin red staining in vitro. We also observed a comparable in vivo regenerative response in a 4-week rabbit calvaria defect model. Therefore, based on the results of this study, PSr6 could be identified as the functionally optimized composition with the potential to be applied as a valuable bioactive component of existing biomaterials used for bone regeneration.

Comparison of translucency, thickness, and gap width of thermoformed and 3D-printed clear aligners using micro-CT and spectrophotometer.

The present study compared the thickness and gap width of thermoformed and 3D-printed clear aligners (CAs) using micro-computed tomography (micro-CT) and evaluated their translucency using spectrophotometer. Four groups of CAs were tested: thermoformed with polyethylene terephthalate glycol (TS) or copolyester-elastomer combination (TM), and 3D-printed TC-85 cleaned with alcohol (PA) or with centrifuge (PC). CIELab coordinates were measured (n = 10) to evaluate translucency. CAs (n = 10) were fitted onto respective models and micro-CT was performed to evaluate the thickness and gap width. Thickness and gap width were measured for different tooth type and location in sagittal sections on all sides. The PC group showed significantly higher translucency than the PA group, which was similar to the TS and TM groups (p < 0.01). After the manufacturing process, thickness reduction was observed in the thermoformed groups, whereas thickness increase was observed in the 3D printed-groups. The TM group showed the least gap width amongst the groups (p < 0.01). Thermoformed and 3D-printed CAs had significantly varied thicknesses and regions of best fit depending on the tooth type and location. Differences in the translucency and thickness of the 3D-printed CAs were observed depending on the cleaning methods.

Pattern of lip retraction according to the presence of lip incompetence in patients with Class II malocclusion.

Objective: The aim of this retrospective study was to compare changes in hard tissue and soft tissue after the four first premolars were extracted with anterior teeth retraction according to the presence or absence of lip incompetence. Methods: Patients who underwent the four first premolars were extracted with anterior teeth retraction were divided into competent (n = 20) and incompetent lip (n = 20) groups. Cephalometric measurements for hard tissue and soft tissue changes were performed pre-treatment and post-treatment. Results: In the competent group, the upper and lower lips retreated by 2.88 mm and 4.28 mm, respectively, and in the incompetent group by 4.13 mm and 5.57 mm, respectively; the differences between the two groups were significant (p < 0.05). A strong positive correlation between retraction of the upper lip and upper incisors was observed in both groups (p < 0.05), whereas a correlation between retraction of the lower lip and lower incisors was only found in the incompetent group. A simple linear regression analysis showed that the pattern of lip retraction following the retraction of the anterior teeth was more predictable in the incompetent group than in the competent group. Conclusions: These findings suggest that the initial evaluation of lip incompetence in patients with skeletal Class II is essential for the accurate prediction of the soft tissue changes following retraction of the anterior teeth in premolar extraction treatment. Therefore, sufficient explanation should be provided during patient consultations.

Prediction of Fishman's skeletal maturity indicators using artificial intelligence.

The present study aimed to evaluate the performance of automated skeletal maturation assessment system for Fishman's skeletal maturity indicators (SMI) for the use in dental fields. Skeletal maturity is particularly important in orthodontics for the determination of treatment timing and method. SMI is widely used for this purpose, as it is less time-consuming and practical in clinical use compared to other methods. Thus, the existing automated skeletal age assessment system based on Greulich and Pyle and Tanner-Whitehouse3 methods was further developed to include SMI using artificial intelligence. This hybrid SMI-modified system consists of three major steps: (1) automated detection of region of interest; (2) automated evaluation of skeletal maturity of each region; and (3) SMI stage mapping. The primary validation was carried out using a dataset of 2593 hand-wrist radiographs, and the SMI mapping algorithm was adjusted accordingly. The performance of the final system was evaluated on a test dataset of 711 hand-wrist radiographs from a different institution. The system achieved a prediction accuracy of 0.772 and mean absolute error and root mean square error of 0.27 and 0.604, respectively, indicating a clinically reliable performance. Thus, it can be used to improve clinical efficiency and reproducibility of SMI prediction.

Prediction of transition state structures of gas-phase chemical reactions via machine learning.

The elucidation of transition state (TS) structures is essential for understanding the mechanisms of chemical reactions and exploring reaction networks. Despite significant advances in computational approaches, TS searching remains a challenging problem owing to the difficulty of constructing an initial structure and heavy computational costs. In this paper, a machine learning (ML) model for predicting the TS structures of general organic reactions is proposed. The proposed model derives the interatomic distances of a TS structure from atomic pair features reflecting reactant, product, and linearly interpolated structures. The model exhibits excellent accuracy, particularly for atomic pairs in which bond formation or breakage occurs. The predicted TS structures yield a high success ratio (93.8%) for quantum chemical saddle point optimizations, and 88.8% of the optimization results have energy errors of less than 0.1 kcal mol-1. Additionally, as a proof of concept, the exploration of multiple reaction paths of an organic reaction is demonstrated based on ML inferences. I envision that the proposed approach will aid in the construction of initial geometries for TS optimization and reaction path exploration.

Skeletal and dentoalveolar effects of miniscrew-assisted rapid palatal expansion based on the length of the miniscrew: a randomized clinical trial.

OBJECTIVES: To compare skeletal and dentoalveolar changes of miniscrew-assisted rapid palatal expansion (MARPE) according to the length of the miniscrews. MATERIALS AND METHODS: This two-arm parallel-randomized controlled trial included 32 adult patients aged 19-35 years who received orthodontic treatment with MARPE. Patients were allocated to two groups, group long (L) and short (S), through block randomization according to the length of the miniscrews installed in MARPE. Cone-beam computed tomography was performed before expansion and after removal of the MARPE; superimposition of the images was conducted. The primary outcome included the amount of bone expansion and the change in the inclination of the anchorage teeth. The secondary outcome included the success rate of midpalatal suture opening and stability of the miniscrews. Blinding was performed during outcome assessment. RESULTS: The final sample comprised 31 patients. There was no significant difference in patient characteristics between group L (n = 16) and group S (n = 15). The change in the width of the processus zygomaticus (P = .010) and ectocanine (P = .001) was significantly higher in group L. A significantly higher success rate of the posterior miniscrews was seen in group L (P = .024). There was no statistically significant difference in the success rate of suture separation or change in tooth inclination. Notable complications were not reported. CONCLUSIONS: MARPE with longer miniscrews can increase the amount of expansion of the maxillary basal bone and canine alveolar bone. Although it also aided in miniscrew stability, it did not guarantee successful midpalatal suture separation.

Stability of vertical dimension following total arch intrusion.

BACKGROUND: The purpose of this study is to evaluate stability of vertical dimension following total arch intrusion using miniscrews by measuring the change during treatment and relapse amount after more than one year of retention. METHODS: Thirty patients (6 men, 24 women) were included in this study. Lateral cephalographs were taken with conventional radiography at the start of treatment (T0), after treatment (T1), and at least one year after treatment (T2). The evaluation was performed by measuring changes of selected parameters during treatment and the extent of relapse after more than one year. RESULTS: During total arch intrusion treatment (T1-T0), anterior and posterior teeth intruded significantly. The mean vertical distance between the maxillary posterior teeth and palatal plane was reduced by 2.30 mm (P < 0.001). The mean vertical distance between the maxillary anterior teeth and palatal plane was reduced by 2.04 mm (P < 0.001). The anterior facial height was also reduced by 2.70 mm (P < 0.001). During retention period (T2-T1), the vertical distance between the maxillary anterior teeth and the palatal plane significantly increased by 0.92 mm (P < 0.001). The anterior facial height increased by 0.81 mm (P < 0.01). CONCLUSIONS: Anterior facial height significantly decreases after treatment. During retention period, relapse of AFH and maxillary anterior teeth observed. There was no correlation between initial amount of AFH, mandibular plane angle, or SNPog and posttreatment AFH relapse. However, there was a significant correlation between the amount of intrusion of anterior and posterior teeth achieved by the treatment and the extent of relapse.

Effect of bacterial resistant zwitterionic derivative incorporation on the physical properties of resin-modified glass ionomer luting cement.

Biofilms induce microbial-mediated surface roughening and deterioration of cement. In this study, zwitterionic derivatives (ZD) of sulfobetaine methacrylate (SBMA) and 2-methacryloyloxyethyl phosphorylcholine, were added in concentrations of 0, 1, and 3% to three different types of commercially available resin-modified glass ionomer cement (RMGIC) (RMC-I: RelyX Luting 2, RMC-II: Nexus RMGI, and RMC-III: GC FujiCEM 2). The unmodified RMGICs served as the control group for comparison. The resistance of Streptococcus mutans to ZD-modified RMGIC was evaluated with a monoculture biofilm assay. The following physical properties of the ZD-modified RMGIC were assessed: wettability, film thickness, flexural strength, elastic modulus, shear bond strength, and failure mode. The ZD-modified RMGIC significantly inhibited biofilm formation, with at least a 30% reduction compared to the control group. The addition of ZD improved the wettability of RMGIC; however, only 3% of the SBMA group was statistically different (P < 0.05). The film thickness increased in proportion to the increasing ZD concentrations; there was no statistical difference within the RMC-I (P > 0.05). The experimental groups' flexural strength, elastic modulus, and shear bond strength showed an insignificant decrease from the control group; there was no statistical difference within the RMC-I (P > 0.05). The mode of failure differed slightly in each group, but all groups showed dominance in the adhesive and mixed failure. Thus, the addition of 1 wt.% ZD in RMGIC favorably enhanced the resistance to Streptococcus mutans without any tangible loss in flexural and shear bond strength.

Cerium oxide nanozymes confer a cytoprotective and bio-friendly surface micro-environment to methacrylate based oro-facial prostheses.

Poly-(methyl methacrylate) (PMMA) is the preferred biomaterial for orofacial prostheses used for the rehabilitation of naso-palatal defects. However, conventional PMMA has limitations determined by the complexity of the local microbiota and the friability of oral mucosa adjacent to these defects. Our purpose was to develop a new type of PMMA, i-PMMA, with good biocompatibility and better biological effects such as higher resistance to microbial adhesion of multiple species and enhanced antioxidant effect. The addition of cerium oxide nanoparticles to PMMA using a mesoporous nano-silica carrier and polybetaine conditioning, resulted in an increased release of cerium ions and enzyme mimetic activity, without tangible loss of mechanical properties. Ex vivo experiments confirmed these observations. In stressed human gingival fibroblasts, i-PMMA reduced the levels of reactive oxygen species and increased the expression of homeostasis-related proteins (PPARg, ATG5, LCI/III). Furthermore, i-PMMA increased the levels of expression of superoxide dismutase and mitogen-activated protein kinases (ERK and Akt), and cellular migration. Lastly, we demonstrated the biosafety of i-PMMA using two in vivo models: skin sensitization assay and oral mucosa irritation test, respectively. Therefore, i-PMMA offers a cytoprotective interface that prevents microbial adhesion and attenuates oxidative stress, thus supporting physiological recovery of the oral mucosa.

Reorientation methodology for reproducible head posture in serial cone beam computed tomography images.

Low dose and accessibility have increased the application of cone beam computed tomography (CBCT). Often serial images are captured for patients to diagnose and plan treatment in the craniofacial region. However, CBCT images are highly variable and lack harmonious reproduction, especially in the head's orientation. Though user-defined orientation methods have been suggested, the reproducibility remains controversial. Here, we propose a landmark-free reorientation methodology based on principal component analysis (PCA) for harmonious orientation of serially captured CBCTs. We analyzed three serial CBCT scans collected for 29 individuals who underwent orthognathic surgery. We first defined a region of interest with the proposed protocol by combining 2D rendering and 3D convex hull method, and identified an intermediary arrangement point. PCA identified the y-axis (anterioposterior) followed by the secondary x-axis (transverse). Finally, by defining the perpendicular z-axis, a new global orientation was assigned. The goodness of alignment (Hausdorff distance) showed a marked improvement (> 50%). Furthermore, we clustered cases based on clinical asymmetry and validated that the protocol was unaffected by the severity of the skeletal deformity. Therefore, it could be suggested that integrating the proposed algorithm as the preliminary step in CBCT evaluation will address a fundamental step towards harmonizing the craniofacial imaging records.