Optimization of Ternary InxGa1-xN Quantum Wells on GaN Microdisks for Full-Color GaN Micro-LEDs.

Red, green, and blue light InxGa1-xN multiple quantum wells have been grown on GaN/γ-LiAlO2 microdisk substrates by plasma-assisted molecular beam epitaxy. We established a mechanism to optimize the self-assembly growth with ball-stick model for InxGa1-xN multiple quantum well microdisks by bottom-up nanotechnology. We showed that three different red, green, and blue lighting micro-LEDs can be made of one single material (InxGa1-xN) solely by tuning the indium content. We also demonstrated that one can fabricate a beautiful InxGa1-xN-QW microdisk by choosing an appropriate buffer layer for optoelectronic applications.

Substrate-Induced Anisotropic Growth of CuAlO2 Platelets in a Liquid-Solid Reaction.

This study reports a simplified method to grow CuAlO2 crystals of submillimeter sizes with a highly anisotropic shape of a platelet. The solid-state reaction of forming CuAlO2 at ca. 1373 K in the first stage of the conventional flux method is no longer required. The CuAlO2 platelets nucleated directly onto the (0001)sapphire surface in a melt of Cu2O saturated with Al2O3 at 1473 K. The excess flux was mostly removed by the capped alumina plate on cooling with a limited amount of residue which can be leached afterward. The CuAlO2 platelets all have a 3R crystal structure with no line and planar defects observed by TEM. The CuAlO2 crystals emit a luminescence at 3.49 eV associated with resonant Raman effect resulted from a band-to-band transition in room-temperature PL measurement. The facile fabrication method for growing highly anisotropic CuAlO2 crystals paves the way for their practical application in photoelectrochemical devices.

Timing advances of commercial divalent-ion co-doped LYSO:Ce and SiPMs in sub-100 ps time-of-flight positron emission tomography.

Objective.Together with novel photodetector technologies and emerging electronic front-end designs, scintillator material research is one of the key aspects to obtain ultra-fast timing in time-of-flight positron emission tomography (TOF-PET). In the late 1990s, Cerium-doped lutetium-yttrium oxyorthosilicate (LYSO:Ce) has been established as the state-of-the-art PET scintillator due to its fast decay time, high light yield and high stopping power. It has been shown that co-doping with divalent ions, such as Ca2+and Mg2+, is beneficial for its scintillation characteristics and timing performance. Therefore, this work aims to identify a fast scintillation material to combine it with novel photosensor technologies to push the state of the art in TOF-PET.Approach.This study evaluates commercially available LYSO:Ce,Ca and LYSO:Ce,Mg samples manufactured by Taiwan Applied Crystal Co., LTD regarding their rise and decay times as well as their coincidence time resolution (CTR) with both ultra-fast high-frequency (HF) readout and commercially available readout electronics, i.e. the TOFPET2 ASIC.Main results.The co-doped samples exhibit state-of-the-art rise times of on average 60 ps and effective decay times of on average 35 ns. Using the latest technological improvements made on NUV-MT SiPMs by Fondazione Bruno Kessler and Broadcom Inc., a 3 × 3 × 19 mm3LYSO:Ce,Ca crystal achieves a CTR of 95 ps (FWHM) with ultra-fast HF readout and 157 ps (FWHM) with the system-applicable TOFPET2 ASIC. Evaluating the timing limits of the scintillation material, we even show a CTR of 56 ps (FWHM) for small 2 × 2 × 3 mm3pixels. A complete overview of the timing performance obtained with different coatings (Teflon, BaSO4) and different crystal sizes coupled to standard Broadcom AFBR-S4N33C013 SiPMs will be presented and discussed.Significance.This work thoroughly evaluates commercially available co-doped LYSO:Ce crystals and, in combination with novel NUV-MT SiPMs, shows a TOF performance that significantly exceeds the current state of the art.

The Singularity Paramagnetic Peak of Bi0.3Sb1.7Te3 with p-type Surface State.

The magnetization measurement was performed in the Bi0.3Sb1.7Te3 single crystal. The magnetic susceptibility revealed a paramagnetic peak independent of the experimental temperature variation. It is speculated to be originated from the free-aligned spin texture at the Dirac point. The ARPES reveals that the Fermi level lies below the Dirac point. The Fermi wavevector extracted from the de Haas-van Alphen oscillation is consistent with the energy dispersion in the ARPES. Our experimental results support that the observed paramagnetic peak in the susceptibility curve does not originate from the free-aligned spin texture at the Dirac point.

A Review on Low-Dimensional Nanomaterials: Nanofabrication, Characterization and Applications.

The development of modern cutting-edge technology relies heavily on the huge success and advancement of nanotechnology, in which nanomaterials and nanostructures provide the indispensable material cornerstone. Owing to their nanoscale dimensions with possible quantum limit, nanomaterials and nanostructures possess a high surface-to-volume ratio, rich surface/interface effects, and distinct physical and chemical properties compared with their bulk counterparts, leading to the remarkably expanded horizons of their applications. Depending on their degree of spatial quantization, low-dimensional nanomaterials are generally categorized into nanoparticles (0D); nanorods, nanowires, and nanobelts (1D); and atomically thin layered materials (2D). This review article provides a comprehensive guide to low-dimensional nanomaterials and nanostructures. It begins with the classification of nanomaterials, followed by an inclusive account of nanofabrication and characterization. Both top-down and bottom-up fabrication approaches are discussed in detail. Next, various significant applications of low-dimensional nanomaterials are discussed, such as photonics, sensors, catalysis, energy storage, diverse coatings, and various bioapplications. This article would serve as a quick and facile guide for scientists and engineers working in the field of nanotechnology and nanomaterials.

The Magnetic Susceptibility Bifurcation in the Ni-Doped Sb2Te3 Topological Insulator with Antiferromagnetic Order Accompanied by Weak Ferromagnetic Alignment.

The magnetic susceptibility reveals a discontinuity at Néel temperature and a hysteresis loop with low coercive field was observed below Néel temperature. The magnetic susceptibility of zero field cool and field cool processes coincide at a temperature above the discontinuity, and they split at temperature blow the discontinuity. The magnetic susceptibility splitting is larger at lower external magnetic fields. No more magnetic susceptibility splitting was observed at a magnetic field above 7000 Oe which is consistent with the magnetic anisotropy energy. Our study supports that these magnetic susceptibility characteristics originate from an antiferromagnetic order accompanied by weak ferromagnetism.

Topological Proximity-Induced Dirac Fermion in Two-Dimensional Antimonene.

Antimonene is a promising two-dimensional (2D) material that is calculated to have a significant fundamental bandgap usable for advanced applications such as field-effect transistors, photoelectric devices, and the quantum-spin Hall (QSH) state. Herein, we demonstrate a phenomenon termed topological proximity effect, which occurs between a 2D material and a three-dimensional (3D) topological insulator (TI). We provide strong evidence derived from hydrogen etching on Sb2Te3 that large-area and well-ordered antimonene presents a 2D topological state. Delicate analysis with a scanning tunneling microscope of the evolutionary intermediates reveals that hydrogen etching on Sb2Te3 resulted in the formation of a large area of antimonene with a buckled structure. A topological state formed in the antimonene/Sb2Te3 heterostructure was confirmed with angle-resolved photoemission spectra and density-functional theory calculations; in particular, the Dirac point was located almost at the Fermi level. The results reveal that Dirac fermions are indeed realized at the interface of a 2D normal insulator (NI) and a 3D TI as a result of strong hybridization between antimonene and Sb2Te3. Our work demonstrates that the position of the Dirac point and the shape of the Dirac surface state can be tuned by varying the energy position of the NI valence band, which modifies the direction of the spin texture of Sb-BL/Sb2Te3 via varying the Fermi level. This topological phase in 2D-material engineering has generated a paradigm in that the topological proximity effect at the NI/TI interface has been realized, which demonstrates a way to create QSH systems in 2D-material TI heterostructures.

Evaluation of the Feasibility of NaCaPO4-Blended Zirconia as a New CAD/CAM Material for Dental Restoration.

The computer-aided design/computer-aided manufacturing (CAD/CAM) fabrication technique has become one of the hottest topics in the dental field. This technology can be applied to fixed partial dentures, removable dentures, and implant prostheses. This study aimed to evaluate the feasibility of NaCaPO4-blended zirconia as a new CAD/CAM material. Eleven different proportional samples of zirconia and NaCaPO4 (xZyN) were prepared and characterized by X-ray diffractometry (XRD) and Vickers microhardness, and the milling property of these new samples was tested via a digital optical microscope. After calcination at 950 °C for 4 h, XRD results showed that the intensity of tetragonal ZrO2 gradually decreased with an increase in the content of NaCaPO4. Furthermore, with the increase in NaCaPO4 content, the sintering became more obvious, which improved the densification of the sintered body and reduced its porosity. Specimens went through milling by a computer numerical control (CNC) machine, and the marginal integrity revealed that being sintered at 1350 °C was better than being sintered at 950 °C. Moreover, 7Z3N showed better marginal fit than that of 6Z4N among thirty-six samples when sintered at 1350 °C (p < 0.05). The milling test results revealed that 7Z3N could be a new CAD/CAM material for dental restoration use in the future.

Rational design of hetero-dimensional C-ZnO/MoS2 nanocomposite anchored on 3D mesoporous carbon framework towards synergistically enhanced stability and efficient visible-light-driven photocatalytic activity.

For efficient solar energy harvesting, various engineering strategies to strengthen visible-light responsivity of ZnO photocatalyst is under intensive investigation. In this work, a new ternary C-ZnO/MoS2/mesoporous carbon nanocomposite was successfully prepared by a two-step solution-processed synthesis protocol. The ternary composite exhibits a well-interconnected 3D mesoporous microstructure assembled by carbon nanosheets, which is loaded with quasi 0D ZnO nanoparticles and 2D MoS2 nanosheets. The carbonaceous nanocomposites show enhanced visible-light-driven photocatalytic performance and high photo-corrosion resistance. The incorporation of carbon in the hybrid design has manifold benefits that drastically promotes the photoactivity and photostability. The significant enhancement in photodegradation activity of the hybrid catalysts can be ascribed to a few positive synergistic effects, such as increased surface area and active reaction sites, boosted surface charge utilization efficiency, and band-gap lowering. The high porosity of the distinct microstructure raises the dye adsorption within the material. Tailored interface/surface properties enable more effective mass transport and higher separation efficiency of photo-generated carriers. The modulated electronic structure leads to the narrowing of the ZnO optical bandgap. Meanwhile, coupling with carbon prevents ZnO from photo-corrosion. Our approach highlights the roles of carbon as structure directing and stabilizing agents as well as heteroatom in defect engineering for wide band-gap oxide materials. The rational material design of multivariate mixed-dimensional architecture also provides guiding insight for the advancement of heterogeneous photocatalyst materials with superior performance and durability. The presented engineering strategy would be a promising method for the preparation of nanomaterials supported on 3D carbon network with high porosity and visible-light-driven photocatalytic performance.

2D CTAB-MoSe2 Nanosheets and 0D MoSe2 Quantum Dots: Facile Top-Down Preparations and Their Peroxidase-Like Catalytic Activity for Colorimetric Detection of Hydrogen Peroxide.

We report the facile and economic preparation of two-dimensional (2D) and 0D MoSe2 nanostructures based on systematic and non-toxic top-down strategies. We demonstrate the intrinsic peroxidase-like activity of these MoSe2 nanostructures. The catalytic processes begin with facilitated decomposition of H2O2 by using MoSe2 nanostructures as peroxidase mimetics. In turn, a large amount of generated radicals oxidizes 3,3,5,5-tetramethylbenzidine (TMB) to produce a visible color reaction. The enzymatic kinetics of our MoSe2 nanostructures complies with typical Michaelis-Menten theory. Catalytic kinetics study reveals a ping-pong mechanism. Moreover, the primary radical responsible for the oxidation of TMB was identified to be È®2- by active species-trapping experiments. Based on the peroxidase mimicking property, we developed a new colorimetric method for H2O2 detection by using 2D and 0D MoSe2 nanostructures. It is shown that the colorimetric sensing capability of our MoSe2 catalysts is comparable to other 2D materials-based colorimetric platforms. For instance, the linear range of H2O2 detection is between 10 and 250 µM by using 2D functionalized MoSe2 nanosheets as an artificial enzyme. Our work develops a systematic approach to use 2D materials to construct novel enzyme-free mimetic for a visual assay of H2O2, which has promising prospects in medical diagnosis and food security monitoring.