RESUMEN
Development of efficient lithium-sulfur (Li-S) battery requires the need to develop an appropriate functional separator that allows strong facilitation and transport of lithium ions together with limited passage of polysulfides. In this work, a multifunctional separator (TB-BAA/SWCNT/PP) is developed through spin coating of a novel zwitterionic microporous polymer (TB-BAA) on the gutter layer constructed from single-walled carbon nanotubes (SWCNT), where commercially available polypropylene (PP) separator is used to act as the mechanical support. SWCNT in this study serves as the first modification layer to decrease the size of the macropores in the PP separator, while the ultrathin TB-BAA top barrier layer with the presence of zwitterionic side chains allows the creation of confined ionic channels with both lithiophilic and sulfophilic groups. Due to the presence of available chemical interactions with lithium polysulfides, selective ion transport can be foreseen through such separator. In this regard, shuttle effect that is frequently encountered in Li-S battery can be suppressed effectively via implementing the as-obtained functional separator, resulting in the creation of credible and stable sulfur electrochemistry. The TB-BAA/SWCNT/PP-based Li-S battery has been investigated to possess high cycling ability (capacity fading per cycle of 0.055% over 500 cycles at 1 C) together with decent rate capability (736.6 mAh g-1 at 3 C). In addition, a high areal capacity retention of 5.03 mAh cm-2 after 50 cycles can be also obtained under raised sulfur loading (5.4 mg cm-2).
RESUMEN
The shuttle effect and slow redox kinetics of sulfur cathode are the most significant technical challenges to the practical application of lithium-sulfur (Li-S) battery. Herein, a novel zwitterionic covalent organic framework (ZW-COF) wrapped onto carbon nanotubes (CNTs), labeled as ZW-COF@CNT, is developed by a reversible condensation reaction of 1,3,5-benzenetricarboxaldehyde (BTA) and 3,8-diamino-6-phenylphenanthridine (DPPD) with CNTs as a template and a subsequently-one-step post-synthetic grafting reaction with 1,3-propanesultone. The experimental results showed that, after loading active material sulfur, zwitterionic ZW-COF@CNT can effectively suppress the shuttle effect of the soluble lithium polysulfides (LiPSs) in Li-S batteries, and exhibits better cycling behavior than the as-developed neutral COF@CNT. Specifically, the as-obtained ZW-COF@CNT based sulfur cathode can maintain a discharge capacity of 944 mAh/g after 100 cycles, while that of COF@CNT based sulfur cathode drops to (665 mAh/g) after 100 cycles. Moreover, the ZW-COF@CNT based sulfur cathode delivers an attractive prolonged cycling behavior with a low capacity decay rate of 0.046 % per cycle at 1 C. This work sheds new light on rational selection and design of functionalized COFs based sulfur cathode in the Li-S battery.
RESUMEN
This Special Issue, entitled "Membranes for Gas Separation and Purification Processes", was introduced to discuss the recent progress in the development of membranes for gas separation and purification [...].
RESUMEN
Light hydrocarbons, obtained through the petroleum refining process, are used in numerous applications. The separation of the various light hydrocarbons is challenging and expensive due to their similar melting and boiling points. Alternative methods have been investigated to supplement cryogenic distillation, which is energy intensive. Membrane technology, on the other hand, can be an attractive alternative in light hydrocarbon separation as a phase change that is known to be energy-intensive is not required during the separation. In this regard, this study focuses on recent advances in mixed-matrix membranes (MMMs) for light hydrocarbon (C1-C3) separation based on gas permeability and selectivity. Moreover, the future research and development direction of MMMs in light hydrocarbon separation is discussed, considering the low intrinsic gas permeability of polymeric membranes.
RESUMEN
This Special Issue, entitled "Emerging Materials for Mixed-Matrix Membranes" was introduced to cover the recent progress in the development of materials for mixed-matrix membranes (MMMs) with potential application in fields such as sea water desalination, gas separation, pharmaceutical separation, wastewater treatment and the removal of pathogenic (viruses and bacteria) microorganisms as well as solvents and resource recovery [...].
RESUMEN
Membrane separation is a compelling technology for hydrogen separation. Among the different types of membranes used to date, the mixed-matrix membranes (MMMs) are one of the most widely used approaches for enhancing separation performances and surpassing the Robeson upper bound limits for polymeric membranes. In this review, we focus on the recent progress in MMMs for hydrogen separation. The discussion first starts with a background introduction of the current hydrogen generation technologies, followed by a comparison between the membrane technology and other hydrogen purification technologies. Thereafter, state-of-the-art MMMs, comprising emerging filler materials that include zeolites, metal-organic frameworks, covalent organic frameworks, and graphene-based materials, are highlighted. The binary filler strategy, which uses two filler materials to create synergistic enhancements in MMMs, is also described. A critical evaluation on the performances of the MMMs is then considered in context, before we conclude with our perspectives on how MMMs for hydrogen separation can advance moving forward.
RESUMEN
Three different zeolite nanocrystals (SAPO-34, PS-MFI and ETS-10) were incorporated into the polymer matrix (Matrimid® 5218) as polymer precursors, with the aim of fabricating mixed-matrix carbon molecular sieve membranes (CMSMs). These membranes are investigated for their potential for air separation process. Based on our gas permeation results, incorporating porous materials is feasible to improve O2 permeability, owing to the creation of additional porosities in the resulting mixed-matrix CMSMs. Owing to this, the performance of the CMSM with 30 wt% PS-MFI loading is able to surpass the upper bound limit. This study demonstrates the feasibility of zeolite nanocrystals in improving O2/N2 separation performance in CMSMs.
RESUMEN
To improve the CO2/N2 separation performance, mixed-matrix carbon molecular sieve membranes (mixed-matrix CMSMs) were fabricated and tested. Two carbon-based fillers, graphene oxide (GO) and activated carbon (YP-50F), were separately incorporated into two polymer precursors (Matrimid® 5218 and ODPA-TMPDA), and the resulting CMSMs demonstrated improved CO2 permeability. The improvement afforded by YP-50F was more substantial due to its higher accessible surface area. Based on the gas permeation data and the Robeson plot for CO2/N2 separation, the performances of the CMSMs containing 15 wt % YP-50F and 15 wt % GO in the mixed polymer matrix surpassed the 2008 Robeson upper bound of polymeric membranes. Hence, this study demonstrates the feasibility of such membranes in improving the CO2/N2 separation performance through the appropriate choice of carbon-based filler materials in polymer matrices.
RESUMEN
Hydrogen (H2) is an industrial gas that has showcased its importance in several well-known processes such as ammonia, methanol and steel productions, as well as in petrochemical industries. Besides, there is a growing interest in H2 production and purification owing to the global efforts to minimize the emission of greenhouse gases. Nevertheless, H2 which is produced synthetically is expected to contain other impurities and unreacted substituents (e.g., carbon dioxide, CO2; nitrogen, N2 and methane, CH4), such that subsequent purification steps are typically required for practical applications. In this context, membrane-based separation has attracted a vast amount of interest due to its desirable advantages over conventional separation processes, such as the ease of operation, low energy consumption and small plant footprint. Efforts have also been made for the development of high-performance membranes that can overcome the limitations of conventional polymer membranes. In particular, the studies on graphene-based membranes have been actively conducted most recently, showcasing outstanding H2-separation performances. This review focuses on the recent progress and potential challenges in graphene-based membranes for H2 purification.
RESUMEN
Nanocrystalline UiO-66 and its derivatives (containing -NH2, -Br, -(OH)2) were developed via pre-synthetic functionalization and incorporated into a polyimide membrane to develop a mixed-matrix membrane (MMM) for CO2/N2 separation. Incorporation of the non-functionalized UiO-66 nanocrystals into the polyimide membrane successfully improved CO2 permeability, with a slight decrease in CO2/N2 selectivity, owing to its large accessible surface area. The addition of other functional groups further improved the CO2/N2 selectivity of the polymeric membrane, with UiO-66-NH2, UiO-66-Br, and UiO-66-(OH)2 demonstrating improvements of 12%, 4%, and 17%, respectively. Further evaluation by solubility-diffusivity analysis revealed that the functionalized UiO-66 in MMMs can effectively increase CO2 diffusivity while suppressing N2 sorption, thus, resulting in improved CO2/N2 selectivity. Such results imply that the structural tuning of UiO-66 by the incorporation of various functional groups is an effective strategy to improve the CO2 separation performance of MMMs.
RESUMEN
MXenes are emerging rapidly as a new family of multifunctional nanomaterials with prospective applications rivaling that of graphenes. Herein, a timely account of the design and performance evaluation of MXene-based membranes is provided. First, the preparation and physicochemical characteristics of MXenes are outlined, with a focus on exfoliation, dispersion stability, and processability, which are crucial factors for membrane fabrication. Then, different formats of MXene-based membranes in the literature are introduced, comprising pristine or intercalated nanolaminates and polymer-based nanocomposites. Next, the major membrane processes so far pursued by MXenes are evaluated, covering gas separation, wastewater treatment, desalination, and organic solvent purification. The potential utility of MXenes in phase inversion and interfacial polymerization, as well as layer-by-layer assembly for the preparation of nanocomposite membranes, is also critically discussed. Looking forward, exploiting the high electrical conductivity and catalytic activity of certain MXenes is put into perspective for niche applications that are not easily achievable by other nanomaterials. Furthermore, the benefits of simulation/modeling approaches for designing MXene-based membranes are exemplified. Overall, critical insights are provided for materials science and membrane communities to navigate better while exploring the potential of MXenes for developing advanced separation membranes.
RESUMEN
The energy-intensive ethylene/ethane separation process is a key challenge to the petrochemical industry. HKUST-1, a metal-organic framework (MOF) which possesses high accessible surface area and porosity, is utilized in mixed-matrix membrane fabrication to investigate its potential for improving the performance for C2H4/C2H6 separation. Prior to membrane fabrication and gas permeation analysis, nanocrystal HKUST-1 was first synthesized. This step is critical in order to ensure that defect-free mixed-matrix membranes can be formed. Then, polyimide-based polymers, ODPA-TMPDA and 6FDA-TMPDA, were chosen as the matrices. Our findings revealed that 20 wt% loading of HKUST-1 was capable of improving C2H4 permeability (155% for ODPA-TMPDA and 69% for 6FDA-TMPDA) without excessively sacrificing the C2H4/C2H6 selectivity. The C2H4 and C2H6 diffusivity, as well as solubility, were also improved substantially as compared to the pure polymeric membranes. Overall, our results edge near the upper bound, confirming the effectiveness of leveraging nanocrystal HKUST-1 filler for performance enhancements in mixed-matrix membranes for C2H4/C2H6 separation.
RESUMEN
Membrane-based air separation (O2/N2) is of great importance owing to its energy efficiency as compared to conventional processes. Currently, dense polymeric membranes serve as the main pillar of industrial processes used for the generation of O2- and N2-enriched gas. However, conventional polymeric membranes often fail to meet the selectivity needs owing to the similarity in the effective diameters of O2 and N2 gases. Meanwhile, mixed-matrix membranes (MMMs) are convenient to produce high-performance membranes while keeping the advantages of polymeric materials. Here, we propose a novel MMM for O2/N2 separation, which is composed of Matrimid® 5218 (Matrimid) as the matrix, cobalt(II) phthalocyanine microparticles (CoPCMPs) as the filler, and Pluronic® F-127 (Pluronic) as the compatibilizer. By the incorporation of CoPCMPs to Matrimid, without Pluronic, interfacial defects were formed. Pluronic-treated CoPCMPs, on the other hand, enhanced O2 permeability and O2/N2 selectivity by 64% and 34%, respectively. We explain the enhancement achieved with the increase of both O2 diffusivity and O2/N2 solubility selectivity.
RESUMEN
Metal-organic frameworks (MOFs) with coordinatively unsaturated (open) metal sites have been intensively investigated in gas separations because their active sites can selectively interact with targeted molecules such as CO2. Although such MOFs have shown to exhibit exceptional CO2 uptake capacity at equilibrium, the dynamic separation behavior is often not satisfactory to be considered in practical applications. Herein, we report a facile and efficient self-sacrifice template strategy based on the nanoscale Kirkendall effect to form novel Co-MOF-74 hollow nanorods enabling adsorption/desorption of gas molecules in a facilitated manner. The time-dependent microscopic and diffraction examinations were performed to elucidate the formation mechanism of Co-MOF-74 hollow nanorods and to obtain insights into the factors critical to maintaining the rodlike morphology. Such nanostructured MOF exhibited much sharper CO2 molecular separation behavior than conventional MOF bulk crystals under a dynamic flow condition, because of its enhanced adsorption kinetics through the shortened diffusion distance. Such enhanced dynamic molecular separation behavior was further confirmed by chromatographic separations where a significant peak narrowing was demonstrated.
RESUMEN
Biogas is an increasingly attractive renewable resource, envisioned to secure future energy demands and help curb global climate change. To capitalize on this resource, membrane processes and state-of-the-art membranes must efficiently recover methane (CH4) from biogas by separating carbon dioxide (CO2). Composite (a.k.a. mixed-matrix) membranes, prepared from common polymers and rationally selected/engineered fillers, are highly promising for this application. This review comprehensively examines filler materials that are capable of enhancing the CO2/CH4 separation performance of polymeric membranes. Specifically, we highlight novel synthetic strategies for engineering filler materials to develop high-performance composite membranes. Besides, as the matrix components (polymers) of composite membranes largely dictate the overall gas separation performances, we introduce a new empirical metric, the "Filler Enhancement Index" ( Findex), to aid researchers in assessing the effectiveness of the fillers from a big data perspective. The Findex systematically decouples the effect of polymer matrices and critically evaluates both conventional and emerging fillers to map out a future direction for next-generation (bio)gas separation membranes. Beyond biogas separation, this review is of relevance to a broader community with interests in composite membranes for other gas separation processes, as well as water treatment applications.
RESUMEN
Separation of acetylene from carbon dioxide and ethylene is challenging in view of their similar sizes and physical properties. Metal-organic frameworks (MOFs) in general are strong candidates for these separations owing to the presence of functional pore surfaces that can selectively capture a specific target molecule. Here, we report a novel 3D microporous cationic framework named JCM-1. This structure possesses imidazolium functional groups on the pore surfaces and pyrazolate as a metal binding group, which is well known to form strong metal-to-ligand bonds. The selective sorption of acetylene over carbon dioxide and ethylene in JCM-1 was successfully demonstrated by equilibrium gas adsorption analysis as well as dynamic breakthrough measurement. Furthermore, its excellent hydrolytic stability makes the separation processes highly recyclable without a substantial loss in acetylene uptake capacity.