RESUMEN
Understanding the intricate details of the surface atomic structure and composition of catalysts during the oxygen evolution reaction (OER) is crucial for developing catalysts with high stability in water electrolyzers. While many notable studies highlight surface amorphization and reconstruction, systematic analytical tracing of the catalyst surface as a function of overpotential remains elusive. Heteroepitaxial (001) films of chemically stable and lattice-oxygen-inactive LaCoO3 are thus utilized as a model catalyst to demonstrate a series of atomic-resolution observations of the film surface at different anodic potentials. The first key finding is that atoms at the surface are fairly dynamic even at lower overpotentials. Angstrom-scale atomic displacements within the perovskite framework are identified below a certain potential level. Another noteworthy feature is that amorphization (or paracrystallization) with no long-range order is finally induced at higher overpotentials. In particular, surface analyses consistently support that the oxidation of lattice oxygen is coupled with amorphous phase formation at the high potentials. Theoretical calculations also reveal an upward shift of oxygen 2p states toward the Fermi level, indicating enhanced lattice oxygen activation when atom displacement occurs more extensively. This study emphasizes that the degradation behavior of OER catalysts can distinctively vary depending on the overpotential level.
RESUMEN
The utilization of an in-plane lattice misfit in an oxide epitaxially grown on another oxide with a different lattice parameter is a well-known approach to induce strains in oxide materials. However, achieving a sufficiently large misfit strain in this heteroepitaxial configuration is usually challenging, unless the thickness of the grown oxide is kept well below a critical value to prevent the formation of misfit dislocations at the interface for relaxation. Instead of adhering to this conventional approach, here, we employ nanometer-scale large strain fields built around misfit dislocations to examine the effects of two distinct types of strainsâtension and compressionâon the generation of oxygen vacancies in heteroepitaxial LaCoO3 films. Our atomic-level observations, coupled with local electron-beam irradiation, clarify that the in-plane compression notably suppresses the creation of oxygen vacancies, whereas the formation of vacancies is facilitated under tensile strain. Demonstrating that the defect generation can considerably vary with the type of strain, our study highlights that the experimental approach adopted in this work is applicable to other oxide systems when investigating the strain effects on vacancy formation.
RESUMEN
Biological systems are composed of hierarchical structures made of a large number of proteins. These structures are highly sophisticated and challenging to replicate using artificial synthesis methods. To exploit these structures in materials science, biotemplating is used to achieve biocomposites that accurately mimic biological structures and impart functionality of inorganic materials, including electrical conductivity. However, the biological scaffolds used in previous studies are limited to stereotypical and simple morphologies with little synthetic diversity because of a lack of control over their morphologies. This study proposes that the specific protein assemblies within the cell-derived extracellular matrix (ECM), whose morphological features are widely tailorable, can be employed as versatile biotemplates. In a typical procedure, a fibrillar assembly of fibronectin-a constituent protein of the ECM-is metalized through an antibody-guided biotemplating approach. Specifically, the antibody-bearing nanogold is attached to the fibronectin through antibody-antigen interactions, and then metals are grown on the nanogold acting as a seed. The biomimetic structure can be adapted for hydrogen production and sensing after improving its electrical conductivity through thermal sintering or additional metal growth. This study demonstrates that cell-derived ECM can be an attractive option for addressing the diversity limitation of a conventional biotemplate.
Asunto(s)
Matriz Extracelular , Fibronectinas , Fibronectinas/metabolismo , Matriz Extracelular/metabolismo , Anticuerpos/metabolismo , BiomiméticaRESUMEN
Since the recognition of a significant oxygen-redox contribution to enhancing the capacity of Li transition-metal oxide cathodes, the oxygen release and subsequent structural variations together with capacity fading are critical issues to achieve better electrochemical performance. As most previous reports dealt with the structural degradation of cathodes after electrochemical cycling, it is fairly difficult to clarify how substantial the effect of lattice strain on the oxygen release will be while exclusively ruling out any electrochemical influences. By utilizing nanoindentation and mechanical surface polishing of single-crystal LiCoO2 and Li2 MnO3 , the local variations of both the atomic structure and oxygen content are scrutinized. Atomic-column-resolved imaging reveals that local LiM (M = Co and Mn) disordering and further amorphization are induced by mechanical strain. Moreover, substantial oxygen deficiency in the regions with these structural changes is directly identified by spectroscopic analyses. Ab initio density functional theory calculations also demonstrate energetically favorable formation of oxygen vacancies under shear strain. Providing direct evidence of oxygen release as a consequence of lattice strain, the findings in this work suggest that efficient strain relaxation will be of great significance for longevity of the anion framework in layered oxide cathodes.
RESUMEN
Since two major criteria for melting were proposed by Lindemann and Born in the early 1900s, many simulations and observations have been carried out to elucidate the premelting phenomena largely at the crystal surfaces and grain boundaries below the bulk melting point. Although dislocations and clusters of vacancies and interstitials were predicted as possible origins to trigger the melting, experimental direct observations demonstrating the correlation of premelting with lattice defects inside a crystal remain elusive. Using atomic-column-resolved imaging with scanning transmission electron microscopy in polycrystalline BaCeO3, here we clarify the initiation of melting at two-dimensional faults inside the crystals below the melting temperature. In particular, melting in a layer-by-layer manner rather than random nucleation at the early stage was identified as a notable finding. Emphasizing the value of direct atomistic observation, our study suggests that lattice defects inside crystals should not be overlooked as preferential nucleation sites for phase transformation including melting.
RESUMEN
As the physical properties of ABX3 perovskite-based oxides strongly depend on the geometry of oxygen octahedra containing transition-metal cations, precise identification of the distortion, tilt, and rotation of the octahedra is an essential step toward understanding the structure-property correlation. Here we discover an important electrostatic origin responsible for remarkable Jahn-Teller-type tetragonal distortion of oxygen octahedra during atomic-level direct observation of two-dimensional [AX] interleaved shear faults in five different perovskite-type materials, SrTiO3, BaCeO3, LaCoO3, LaNiO3, and CsPbBr3. When the [AX] sublayer has a net charge, for example [LaO]+ in LaCoO3 and LaNiO3, substantial tetragonal elongation of oxygen octahedra at the fault plane is observed and this screens the strong repulsion between the consecutive [LaO]+ layers. Moreover, our findings on the distortion induced by local charge are identified to be a general structural feature in lanthanide-based An + 1BnX3n + 1-type Ruddlesden-Popper (RP) oxides with charged [LnO]+ (Ln = La, Pr, Nd, Eu, and Gd) sublayers, among more than 80 RP oxides and halides with high symmetry. The present study thus demonstrates that the local uneven electrostatics is a crucial factor significantly affecting the crystal structure of complex oxides.
RESUMEN
An initial crystalline phase can transform into another phases as cations are electrochemically inserted into its lattice. Precise identification of phase evolution at an atomic level during transformation is thus the very first step to comprehensively understand the cation insertion behavior and subsequently achieve much higher storage capacity in rechargeable cells, although it is sometimes challenging. By intensively using atomic-column-resolved scanning transmission electron microscopy, we directly visualize the simultaneous intercalation of both H2O and Zn during discharge of Zn ions into a V2O5 cathode with an aqueous electrolyte. In particular, when further Zn insertion proceeds, multiple intermediate phases, which are not identified by a macroscopic powder diffraction method, are clearly imaged at an atomic scale, showing structurally topotactic correlation between the phases. The findings in this work suggest that smooth multiphase evolution with a low transition barrier is significantly related to the high capacity of oxide cathodes for aqueous rechargeable cells, where the crystal structure of cathode materials after discharge differs from the initial crystalline state in general.
RESUMEN
Although numerous studies on oxide catalysts for an efficient oxygen evolution reaction have been carried out to compare their catalytic performance and suggest new compositions, two significant constraints have been overlooked. One is the difference in electronic conduction behavior between catalysts (metallic versus insulating) and the other is the strong crystallographic surface orientation dependence of the catalysis in a crystal. Consequently, unless a comprehensive comparison of the oxygen-evolution catalytic activity between samples is made on a crystallographically identical surface with sufficient electron conduction, misleading interpretations on the catalytic performance and mechanism may be unavoidable. To overcome these limitations, we utilize both metallic (001) LaNiO3 epitaxial thin films together with metal dopants and semiconducting (001) LaCoO3 epitaxial thin films supported with a conductive interlayer. We identify that Fe, Cr, and Al are beneficial to enhance the catalysis in LaNiO3 although their perovskite counterparts, LaFeO3, LaCrO3, and LaAlO3, with a large bandgap are inactive. Furthermore, semiconducting LaCoO3 is found to have more than one order higher activity than metallic LaNiO3, in contrast to previous reports. Showing the importance of facilitating electron conduction, our work highlights the impact of the near-Fermi-level d-orbital states on the oxygen-evolution catalysis performance in perovskite oxides.
RESUMEN
As chemical reactions and charge-transfer simultaneously occur on the catalyst surface during electrocatalysis, numerous studies have been carried out to attain an in-depth understanding on the correlation among the surface structure and composition, the electrical transport, and the overall catalytic activity. Compared with other catalysis reactions, a relatively larger activation barrier for oxygen evolution/reduction reactions (OER/ORR), where multiple electron transfers are involved, is noted. Many works over the past decade thus have been focused on the atomic-scale control of the surface structure and the precise identification of surface composition change in catalyst materials to achieve better conversion efficiency. In particular, recent advances in various analytical tools have enabled noteworthy findings of unexpected catalytic features at atomic resolution, providing significant insights toward reducing the activation barriers and subsequently improving the catalytic performance. In addition to summarizing important surface issues, including lattice defects, related to the OER and ORR in this Review, we present the current status and discuss future perspectives of oxide- and alloy-based catalysts in terms of atomic-scale observation and manipulation.
RESUMEN
Cu-based p-type semiconducting oxides have been sought for water-reduction photocathodes to enhance the energy-conversion efficiency in photoelectrochemical cells. CuBi2O4 has recently attracted notable attention as a new family of p-type oxides, based on its adequate band gap. Although the identification of a major defect structure should be the first step toward understanding the electronic conduction behavior, no direct experimental analysis has been carried out yet. Using atomic-scale scanning transmission electron microscopy together with chemical probing, we identify a substantial amount of BiCu-CuBi antisite intermixing as a major point-defect type. Our density functional theory calculations also show that antisite BiCu can seriously hinder the hole-polaron hopping between Cu, in agreement with lower conductivity and a larger thermal activation barrier under a higher degree of intermixing. These findings highlight the value of the direct identification of point defects for a better understanding of electronic properties in complex oxides.
RESUMEN
A great deal of research has recently been focused on Ruddlesden-Popper (RP) two-dimensional planar faults consisting of intervened [AO] monolayers in an ABO3 perovskite framework due to the structurally peculiar shear configuration. In this work, we scrutinize the effect of elastic strain on the generation behavior of RP faults, which are electrocatalytically very active sites for the oxygen evolution reaction (OER), in (001) epitaxial LaNiO3 thin films through by using two distinct single-crystal substrates with different cubic lattice parameters. Atomic-scale direct observations reveal that RP faults can be more favorably created when tensile misfit strain is exerted. Furthermore, we demonstrate that the controlled growth of thin films show notably enhanced OER activity by the RP faults. The findings in this study highlight the impact of symmetry-breaking defect formation for better oxygen electrocatalysis in perovskite oxides.
RESUMEN
A substantial amount of interest has been focused on ABO3-type perovskite oxides over the past decade as oxygen electrocatalysts. Despite many studies on various compositions, the correlation between the structure of the oxygen octahedra and electrocatalytic property has been overlooked, and there accordingly have been a very limited number of attempts regarding control of atomistic structure. Utilizing epitaxial LnNiO3 (Ln = La, Pr, Nd) thin films, here we demonstrate that simple electrochemical exchange of Fe in the surface region with several-unit-cell thickness is notably effective to boost the catalytic activity for the oxygen evolution reaction by different orders of magnitude. Furthermore, we directly establish that strong distortion of oxygen octahedra at the angstrom scale is readily induced during the Fe exchange, and that this structural perturbation permits easier charge transfer. The findings suggest that structural alteration can be an efficient approach to achieve exceptional electrocatalysis in crystalline oxides.
RESUMEN
The electrochemical (de)intercalation reactions of lithium ions are initiated at the electrode surface in contact with an electrolyte solution. Therefore, substantial structural degradation, which shortens the cycle life of cells, is frequently observed at the surface of cathode particles, including lithium-metal intermixing, phase transitions, and dissolution of lithium and transition metals into the electrolyte. Furthermore, in contrast to the strict restriction of moisture in lithium-ion cells with nonaqueous organic electrolytes, electrode materials in aqueous-electrolyte cells are under much more reactive environments with water and oxygen, thereby leading to serious surface chemical reactions on the cathode particles. The present article presents key results regarding structural and composition variations at the surface of oxide-based cathodes in both high-performance nonaqueous and recently proposed aqueous lithium-ion batteries; in particular, focusing on direct atomic-scale observations preformed by means of scanning transmission electron microscopy. Precise identification of surface degradation at the atomic level is thus emphasized because it can provide significant insights into overcoming the limitations of current lithium-ion batteries.
RESUMEN
Supported metal nanoparticles hold great promise for many fields, including catalysis and renewable energy. Here we report a novel methodology for the in situ growth of architecturally tailored, regenerative metal nanocatalysts that is applicable to a wide range of materials. The main idea underlying this strategy is to selectively diffuse catalytically active metals along the grain boundaries of host oxides and then to reduce the diffused metallic species to form nanoclusters. As a case study, we choose ceria and zirconia, the most recognized oxide supports, and spontaneously form various metal particles on their surface with controlled size and distribution. Metal atoms move back and forth between the interior (as cations) and the exterior (as clusters) of the host oxide lattice as the reductive and oxidative atmospheres repeat, even at temperatures below 700 °C. Furthermore, they exhibit excellent sintering/coking resistance and reactivity toward chemical/electrochemical reactions, demonstrating potential to be used in various applications.
RESUMEN
Stabilized Bi2O3 has gained a considerable amount of attention as a solid electrolyte material for low-temperature solid oxide fuel cells due to its superior oxygen-ion conductivity at the temperature of relevance (≤500 °C). Despite many research efforts to measure the transport properties of stabilized Bi2O3, the effects of grain boundaries on the electrical conductivity have rarely been reported and their results are even controversial. Here, we attempt quantitatively to assess the grain boundary contribution out of the total ionic conductivity at elevated temperatures (350-500 °C) by fabricating epitaxial and nano-polycrystalline thin films of yttrium-stabilized Bi2O3. Surprisingly, both epitaxial and polycrystalline films show nearly identical levels of ionic conductivity, as measured by alternating current impedance spectroscopy and this is the case despite the fact that the polyfilm possesses nanosized columnar grains and thus an extremely high density of the grain boundaries. The highly conductive nature of grain boundaries in stabilized Bi2O3 is discussed in terms of the clean and chemically uniform grain boundary without segregates, and the implications for device application are suggested.
RESUMEN
In many ion-conducting polycrystalline oxides, grain boundaries are generally accepted as rate-limiting obstacles to rapid ionic diffusion, often resulting in overall sluggish transport. Consequently, based on a precise understanding of the structural and compositional features at grain boundaries, systematic control of the polycrystalline microstructure is a key factor to achieve better ionic conduction performance. In this study, we clarify that a nanometer-thick amorphous phase at most grain boundaries in proton-conducting BaCeO3 polycrystals is responsible for substantial retardation of proton migration and moreover is very reactive with water and carbon dioxide gas. By a combination of atomic-scale chemical analysis and physical imaging, we demonstrate that highly densified BaCeO3 polycrystals free of a grain-boundary amorphous phase can be easily fabricated by a conventional ceramic process and show sufficiently high proton conductivity together with significantly improved chemical stability. These findings emphasize the value of direct identification of intergranular phases and subsequent manipulation of their distribution in ion-conducting oxide polycrystals.
RESUMEN
Although theoretical studies and experimental investigations have demonstrated the presence of space-charge-induced dopant segregation, most work has been confined largely to the crystal-free surface and some special grain boundaries, and to the best of our knowledge there has been no systematic comparison to understand how the segregation varies at different types of interfaces in polycrystals. Here, through atomic-column resolved scanning transmission electron microscopy in real polycrystalline samples, we directly elucidate the space-charge segregation features at five distinct types of interfaces in an ABO3 perovskite oxide doped with A- and B-site donors. A series of observations reveals that both the interfacial atomic structure and the subsequent segregation behaviour are invariant regardless of the interface type. The findings in this study thus suggest that the electrostatic potential variation by the interface excess charge and compensating space charge provides a crucial contribution to determining not only the distribution of dopants but also the interfacial structure in oxides.
RESUMEN
Atomic-scale direct probing of active sites and subsequent elucidation of the structure-activity relationship are important issues involving oxide-based electrocatalysts to achieve better electrochemical conversion efficiency. By generating Ruddlesden-Popper (RP) two-dimensional homologous faults via simple control of the cation nonstoichiometry in LaNiO3 thin films, we demonstrate that strong tetragonal distortion of [NiO6] octahedra is induced by more than 20% elongation of Ni-O bonds in the faults. In addition to direct visualization of the elongation by scanning transmission electron microscopy, we identify that the distorted [NiO6] octahedra in the faults show considerably higher electrocatalytic activities than other surface sites during the electrochemical oxygen evolution reaction. This unequivocal evidence of the octahedral distortion and its impact on electrocatalysis in LaNiO3 suggests that the formation of RP-type faults can provide an efficient way to control the octahedral geometry and thereby remarkably enhance the oxygen catalytic performance of perovskite oxides.
RESUMEN
A record-high, near-theoretical intrinsic magnetoelectric (ME) coupling of 7 V cm-1 Oe-1 is achieved in a heterostructure of piezoelectric Pb(Zr,Ti)O3 (PZT) film deposited on magnetostrictive Metglas (FeBSi). The anchor-like, nanostructured interface between PZT and Metglas, improved crystallinity of PZT by laser annealing, and optimum volume of crystalline PZT are found to be the key factors in realizing such a giant strain-mediated ME coupling.
RESUMEN
In most proton-conducing perovskite oxides, the electrostatic attraction between negatively charged acceptor dopants and protonic defects having a positive charge is known to be a major cause of retardation of proton conduction, a phenomenon that is generally referred to as proton trapping. We experimentally show that proton trapping can be suppressed by clustering of positively charged oxygen vacancies to acceptors in BaZrO3-δ and BaCeO3-δ . In particular, to ensure the vacancy-acceptor association is effective against proton trapping, the valence electron density of acceptors should not significantly vary when the oxygen vacancies cluster, based on the weak hybridization between the valence d or p orbitals of acceptors and the 2p orbitals of oxygen.