Experimental and Numerical Assessment of Supporting Road Signs Masts Family for Compliance with the Standard EN 12767.

The analysis aimed to assess the passive safety of supporting masts for road signs in accordance with EN 12767. Experimental tests were carried out based on the requirements of the standard for the smallest and the largest constructions within the product family. Numerical models of crash tests were prepared for whole product family using the Finite Element Method in the LS-Dyna environment. Based on the comparison of the experimental tests and the numerical calculations, the usefulness of the numerical model for estimating the actual value of the Acceleration Severity Index (ASI) and the Theoretical Head Impact Velocity (THIV) was assessed. With the use of these relationships the values of ASI and THIV for masts not tested experimentally were estimated. It was confirmed that the analyzed masts met the requirements for the passive safety of structures set out in the standard EN 12767. It was possible since as a result of the impact, the mast column detached from the base, allowing the vehicle to continue moving. The behavior of the masts was primarily influenced by the destruction of the safety connectors. The paper presents the most important elements from the point of view of designing such solutions.

High-speed OCT-based ocular biometer combined with an air-puff system for determination of induced retraction-free eye dynamics.

We demonstrate a swept source OCT-based ocular biometer integrated with an air-puff stimulus to study the reaction of the eye to mechanical stimulation in vivo. The system enables simultaneous measurement of the stimulus strength and high-speed imaging of the eye dynamics along the visual axis. We characterize the stimulus and perform optimization of the data acquisition for a proper interpretation of the results. Access to the dynamics of axial eye length allows for a determination of the eye retraction, which is used to correct the air-puff induced displacement of ocular structures. We define the parameters to quantify the reaction of the eye to the air puff and determine their reproducibility in a group of healthy subjects. We observe the corneal deformation process and axial wobbling of the crystalline lens. OCT biometer combined with the air puff is the first instrument with the potential to provide comprehensive information on the biomechanics of ocular components.

Assessment of the influence of viscoelasticity of cornea in animal ex vivo model using air-puff optical coherence tomography and corneal hysteresis.

Application of the air-puff swept source optical coherence tomography (SS-OCT) instrument to determine the influence of viscoelasticity on the relation between overall the air-puff force and corneal apex displacement of porcine corneas ex vivo is demonstrated. Simultaneous recording of time-evolution of the tissue displacement and air pulse stimulus allows obtaining valuable information related in part to the mechanical properties of the cornea. A novel approach based on quantitative analysis of the corneal hysteresis of OCT data is presented. The corneal response to the air pulse is assessed for different well-controlled intraocular pressure (IOP) levels and for the progression of cross-linking-induced stiffness of the cornea. Micrometer resolution, fast acquisition and noncontact character of the air-puff SS-OCT measurements have potential to improve the in vivo assessment of mechanical properties of the human corneas.

Microarchitecture parameters describe bone structure and its strength better than BMD.

INTRODUCTION AND HYPOTHESIS: Some papers have shown that bone mineral density (BMD) may not be accurate in predicting fracture risk. Recently microarchitecture parameters have been reported to give information on bone characteristics. The aim of this study was to find out if the values of volume, fractal dimension, and bone mineral density are correlated with bone strength. METHODS: Forty-two human bone samples harvested during total hip replacement surgery were cut to cylindrical samples. The geometrical mesh of layers of bone mass obtained from microCT investigation and the volumes of each layer and fractal dimension were calculated. The finite element method was applied to calculate the compression force F causing ε = 0.8% strain. RESULTS: There were stronger correlations for microarchitecture parameters with strength than those for bone mineral density. The values of determination coefficient R(2) for mean volume and force were 0.88 and 0.90 for mean fractal dimension and force, while for BMD and force the value was 0.53. The samples with bigger mean bone volume of layers and bigger mean fractal dimension of layers (more complex structure) presented higher strength. CONCLUSION: The volumetric and fractal dimension parameters better describe bone structure and strength than BMD.

The relationship between trabecular bone structure modeling methods and the elastic modulus as calculated by FEM.

Trabecular bone cores were collected from the femoral head at the time of surgery (hip arthroplasty). Investigated were 42 specimens, from patients with osteoporosis and coxarthrosis. The cores were scanned used computer microtomography (microCT) system at an isotropic spatial resolution of 36 microns. Image stacks were converted to finite element models via a bone voxel-to-element algorithm. The apparent modulus was calculated based on the assumptions that for the elastic properties, E = 10 MPa and ν = 0.3. The compressive deformation as calculated by finite elements (FE) analysis was 0.8%. The models were coarsened to effectively change the resolution or voxel size (from 72 microns to 288 microns or from 72 microns to 1080 microns). The aim of our study is to determine how an increase in the distance between scans changes the elastic properties as calculated by FE models. We tried to find a border value voxel size at which the module values were possible to calculate. As the voxel size increased, the mean voxel volume increased and the FEA-derived apparent modulus decreased. The slope of voxel size versus modulus relationship correlated with several architectural indices of trabecular bone.

Study of the behavior of the trabecular bone under cyclic compression with stepwise increasing amplitude.

This paper presents the results of a study of 61 trabecular bone samples exposed to a cyclic (1 Hz) compression load. The load was increased stepwise. Characteristic patterns of the hysteresis loop for the middle cycles of successive steps of load and for respective steps of load are presented. Characteristic patterns of secant modulus were also determined. The fatigue life results recorded were compared with the indices of bone architecture determined using micro-CT. Using Pearson's correlation, the best relationship between fatigue life and bone volume ratio (BV/TV) and the maximum load for which there was also reported a maximal value secant stiffness were identified. Based on these findings, it was determined that it is possible to use stepwise increasing load for analysis of the fatigue behavior of trabecular bone.

Investigation of statistical relationships between quantities describing bone architecture, its fractal dimensions and mechanical properties.

The paper presents linear, logarithmic and exponential regression tabecular bone indices, fractal dimensions and strength. The analysis of the above parameters was supported by determining non-parametric correlation coefficients: Spearman's ρ, gamma and Kendall's τ. The principal components' analysis (PCA) was also performed in order to reduce the number of indices describing the variance in the data set. The analysis showed the most independent indices: lacunarity (λm, λmin, λmax), BMD, Conn.D., SMI, DA, ρA and age.