Redox and luminescent properties of robust and air-stable N-heterocyclic carbene group 4 metal complexes.

Robust and air-stable homoleptic group 4 complexes of the type M(L)2 [1-3; M = Ti, Zr, Hf; L = dianionic bis(aryloxide) N-heterocyclic carbene (NHC) ligand] were readily synthesized from the NHC proligand 1,3-bis(3,5-di-tert-butyl-2-hydroxyphenyl)imidazolinium chloride (H3L,Cl) and appropriate group 4 precursors. As deduced from cyclic voltammetry studies, the homoleptic bis-adduct zirconium and hafnium complexes 2 and 3 can also be oxidized, with up to four one-electron-oxidation signals for the zirconium derivative 2 (three reversible signals). Electron paramagnetic resonance data for the one-electron oxidation of complexes 1-3 agree with the formation of ligand-centered species. Compounds 2 and 3 are luminescent upon excitation in the absorption band at 362 nm with emissions at 485 and 534 nm with good quantum yields (ϕ = 0.08 and 0.12) for 2 and 3, respectively. In contrast, the titanium complex 1 does not exhibit luminescent properties upon excitation in the absorption band at 310 and 395 nm. Complexes 2 and 3 constitute the first examples of emissive nonmetallocene group 4 metal complexes.

NIR emission of cyclic [4]rotaxanes containing π-extended porphyrin chromophores.

The photophysical properties of a Cu(I) [4]rotaxane 4(4+) and of the demetalated [4]rotaxane 3 have been determined and compared to those of the component Zn porphyrin 2. All samples emit in the NIR region (700-1200 nm). The luminescence from the interlocked structures is bathochromically shifted with respect to 2 and displays a lower emission quantum yield, much lower for 4(4+) than for 3. The occurrence of intra-molecular electron or energy transfer is excluded and the decrease in luminescence yield is discussed in terms of the energy gap law and of electronic interactions between components of the cyclic interlocked structure. In toluene a dual emission behavior, similar to that of 2, is observed for 3 and ascribed to the presence of two non-equilibrated excited states, π-π* and CT in nature with lifetimes of 0.80 and 0.14 ns, respectively.

Copper(I)-assembled [3]rotaxane whose two rings act as flapping wings.

A new copper-complexed [3]rotaxane consisting of two coordinating 30-membered rings threaded by a two-binding-site axis has been prepared in good yield from relatively simple organic fragments. The main specificity of the system originates from the stoppering reaction, based on "click" chemistry, and thus from the presence of two triazole groups at positions next to the bidentate chelates of the axis central part. The geometry of the coordinating atoms belonging to the axis is such that the triazole groups can either be part of the coordinating fragments when the metal center is 5-coordinate or be not at all involved in coordination to the metal when the latter is 4-coordinate. To be more specific, when the two complexed metal centers are monovalent copper(I) centers, the triazoles are not included in the metal coordination sphere, whereas when the metal centers are Cu(II) or Zn(2+), the triazole groups are bound to the metals. This is easily explained by the fact that Cu(I) is preferably 4-coordinate and Cu(II) and Zn(2+) are 5-coordinate. The interconversion between both situations (4- or 5-coordinate) can be quantitatively induced by metal exchange (Cu(I)/Zn(2+)) or by a redox process (Cu(II)/Cu(I)). It leads to important geometrical changes and in particular to a strong modification of the angle between the two rings. As a consequence, the two threaded rings undergo a motion which is reminiscent of a wing-flapping movement similar to that of birds. This flapping motion is fast and quantitative. It should lead to new functional molecular machines in the future.

Library of second-generation cycloruthenated compounds and evaluation of their biological properties as potential anticancer drugs: passing the nanomolar barrier.

A library of 32 organoruthenium compounds has been synthesised. Known and novel C-N cyclometalated compounds as well as N-C-N and N-N-C pincer derivatives of this metal have been used in this purpose. Most of the compounds have been tested for their in vitro antitumoral behaviours, good to excellent activities have thus been found. Several of the newly synthesized compounds pass the symbolic barrier of the nanomolar range for their IC(50) indicating a critical improvement. The level of activity is tentatively correlated to physicochemical properties of the compounds such as their Ru(III/II) redox potential and their lipophilicity (log P).

Synthesis of [5]rotaxanes containing bi- and tridentate coordination sites in the axis.

A new example of a linear [5]rotaxane has been synthesized by using the traditional "gathering-and-threading" approach but based on an unusual axle incorporating a symmetrical bis(bidentate) chelating fragment built on a 4,7-phenanthroline core. The stoppering reaction is particularly noteworthy since, instead of using a trivial bulky stopper as precursor to the blocking group, two semistoppered copper-complexed [2]pseudorotaxanes (namely [2]semirotaxanes) are used, which leads to the desired [5]rotaxane in good yield. The efficiency of the method relies on the use of "click" chemistry, with its very mild conditions, and on the protection by a transition-metal (copper(I)) of the various coordinating groups present in the fragments to be interconnected (terpy and bidentate chelating groups), thus inhibiting potential detrimental side reactions during the copper-catalyzed stoppering reaction. Since the external fragments and the central core of the system contain tri- and bidentate chelating units, respectively, the axle of the final [5]rotaxane incorporates two types of coordinating units: two external terpy groups (terpy: 2,2':6',2''-terpyridine) and two central bidentate ligands. Such a situation enables the system to tidy two different metals centers, and to localize them in a priori well-defined positions. This is what was observed when mixing the free ligand with a mixture of Zn(2+) and Li(+) : the zinc(II) ions were unambiguously shown to occupy the external sites, whereas the Li(+) cations were found in the central part of the [5]rotaxane. An X-ray diffraction study carried out on a [3]pseudorotaxane, the axis of which is similar to the central part of the [5]rotaxane axle, demonstrates that Zn(2+) is clearly five-coordinate, the fifth ligand being a counterion, even when the coordination site of the pseudorotaxane is designed for four-coordinate metals, which is in marked contrast with copper(I) or Li(+) .

Electron stimulation of internal torsion of a surface-mounted molecular rotor.

A molecular rotor which includes a central rotator group was investigated by scanning tunneling microscopy at 4.9 K as it was grafted on a Cu(111) surface via its two terminal groups. Topographs with submolecular resolution revealed several distinct molecular conformations which we attribute to different angular orientations of the rotator and which are locally stable states according to density functional theory calculations. Time-resolved tunneling current spectra showed that the rotator undergoes a torsional motion around the molecular long axis as stimulated by tunneling electrons in a one-electron process with an excitation energy threshold of 355 meV. Calculations identified an intrinsic axial vibration mode of the rotator group at 370 meV as adsorbed on the surface, which we propose to be the channel for effectively converting the tunneling electron energy into the mechanical energy of the intramolecular torsion.

Probing electronic superexchange coupling at isolated poly-p-phenylene molecules.

Superexchange coupling in poly-p-phenylene molecular wires was probed using scanning tunneling microscopy/spectroscopy at cryogenic temperatures. The coupling strength was characterized by measuring the energy splitting between the molecular states constructed by symmetric and antisymmetric dimerization of molecular fragments' orbitals. The results confirm the theoretically predicted exponential decay behavior of the superexchange coupling on a single-molecule level. A decay constant of 0.10 +/- 0.02 A(-1) was obtained. Owing to the high spatial resolution of scanning tunneling microscopy, the molecules' internal states (e.g., molecular conformation) as well as external states (e.g., interaction with foreign atoms or molecules) were elucidated with atomic precision at the mean time of characterizing the superexchange coupling. This method provides a new approach to quantify how intramolecular charge transfer is influenced by molecular conformation and interaction with the surroundings.

Templated synthesis of cyclic [4]rotaxanes consisting of two stiff rods threaded through two bis-macrocycles with a large and rigid central plate as spacer.

Two related cyclic [4]rotaxanes consisting of double macrocycles and rigid rods incorporating two bidentate chelates have each been prepared in high yield. The first step is a multigathering and threading reaction driven by coordination of two different bidentate chelates (part of either the rings or the rods) to each copper(I) center so as to afford the desired precursor. In both cases, the assembly step is done under very mild conditions, and it is quantitative. The second key reaction is the stopper-attaching reaction, based on click chemistry. Even if the quadruple stoppering reaction is not quantitative, it is relatively high-yielding (60% and 95%), and the copper-driven assembly process is carried out at room temperature without any aggressive reagent. The final copper-complexed [4]rotaxanes obtained contain two aromatic plates roughly parallel to one another located at the center of each bis-macrocycle. In the most promising case in terms of host-guest properties, the plates are zinc(II) porphyrins of the tetra-aryl series. The compounds have been fully characterized by various spectroscopic techniques ((1)H NMR, mass spectrometry, and electronic absorption spectroscopy). Unexpectedly, the copper-complexed porphyrinic [4]rotaxane could be crystallized as its 4PF(6)(-) salt to afford X-ray quality crystals. The structure obtained is in perfect agreement with the postulated chemical structure of the compound. It is particularly attractive in terms of symmetry and molecular aesthetics. The distance between the zinc atoms of the two porphyrins is 8.673 A, which is sufficient to allow insertion between the two porphyrinic plates of small ditopic basic substrates able to interact with the central porphyrinic Zn atoms. This prediction has been confirmed by absorption spectroscopy measurements in the presence of various organic substrates. However, large substrates cannot be introduced in the corresponding recognition site and are thus complexed mostly in an exo fashion, being located outside the receptor cavity. Noteworthy, the stability constants of the 1:1 host-guest complexes are high (10(7) M(-1)).

Cyclometalated Ru(II) complexes with improved octahedral geometry: synthesis and photophysical properties.

Cyclometalated bis-tridentate ruthenium(II) complexes incorporating 2,6-diquinolin-8-ylpyridine ligands and exhibiting broad visible absorptions are described. A [Ru(N(wedge)N(wedge)N)(N(wedge)C(wedge)N)](+) complex based only on ligands with expanded bite angles has a metal-to-ligand charge-transfer excited-state lifetime of 16 ns, which is attributed to a strong ligand field and therefore reduced deactivation via metal-centered states.

Excited-state relaxation dynamics of Re(I) tricarbonyl complexes with macrocyclic phenanthroline ligands studied by time-resolved IR spectroscopy.

Two sets of supramolecular rhenium carbonyl-phenanthroline complexes were prepared: fac-[Re(Cl)(CO)(3)(N,N)] and fac-[Re(Etpy)(CO)(3)(N,N)](+), where N,N is 2,9-di-anisyl-1,10-phenanthroline (dap) or two related macrocyclic ligands, where the two anisyl groups are connected by a polyether chain of different length and rigidity (m27, m30), which wraps around and above the equatorial Re(CO)(2) group. The excited-state character and relaxation dynamics of these complexes were investigated by picosecond time-resolved IR spectroscopy in the spectral region of C[triple bond, length as m-dash]O stretching vibrations, nu(CO). The results were interpreted with the aid of DFT and TD-DFT calculations of the molecular structures and electron-density redistribution upon excitation. [Re(Cl)(CO)(3)(phen-macrocycle)] in CH(2)Cl(2) have the same type of lowest excited state as analogous acyclic phen or bpy complexes, that is a mixed Re(CO)(3)-->phen and Cl-->phen MLCT/XLCT, together with some pipi*(phen) IL character. Its relaxation dynamics are qualitatively similar to those of phen or bpy complexes. However, relaxation of [Re(Cl)(CO)(3)(m30)] shows a slow kinetics component ( approximately 22 ps) which arises from confined local solvent molecules and/or from conformational movements of the flexible m30 polyether ring. In contrast, attaching anisyl groups at the 2 and 9 phen positions in [Re(Etpy)(CO)(3)(phen-macrocycle)](+) effectively "freezes" excited-state relaxation in MeCN, regardless of the presence of the macrocyclic ring. The lowest excited triplet state has a mixed MLCT/IL character. Restricting the solvent access to the excited chromophore clearly affects both the character and dynamics of the lowest excited state.

Adjustable receptor based on a [3]rotaxane whose two threaded rings are rigidly attached to two porphyrinic plates: synthesis and complexation studies.

The design and synthesis of a new type of receptor based on a [3]rotaxane, consisting of one thread and two threaded rings, is reported, as well as some of its complexing properties toward given guests. Two rings rigidly attached to porphyrins are threaded by a stiff rod incorporating two 2,2'-bipyridine-like chelates, the threading process being driven by two Cu(I) atoms acting as templates. A double-stoppering reaction based on click chemistry leads to the copper-complexed [3]rotaxane in which the rings are located close to the central part of the thread and the distance between the two porphyrin plates is short. Removal of the two Cu(I) cations releases the two rings which are now free to move along and around the thread. In these two states of the [3]rotaxane, free and complexed with copper, the two zinc(II) porphyrins attached to the rings can bind different ditopic guests bearing pyridyl groups or amines as terminal functions. UV-visible and NMR DOSY experiments were realized with guests of different sizes, and the association constants were determined. The free [3]rotaxane is both a strong and highly adaptable receptor with high stability constants for the host/guest complexes, log K being in the range of 6.3-7.5 for guests with a length varying between 2.8 and 18 A. The copper-complexed [3]rotaxane is still a good receptor for small guests due to an entropic gain for this preorganized molecule compared to the free [3]rotaxane, but it is a less strong receptor for guests which do not fit the short distance between the two porphyrins.

Computational, structural, and mechanistic analysis of the electrochemically driven pirouetting motion of a copper rotaxane.

A mechanism for the electrochemically driven reorganization of a model copper [2]pseudorotaxane is proposed on the basis of density functional theory computations and validated by comparing to experimental results. We investigate in detail the ligand reorganization around the Cu ion from a 4 to 5 coordination number that follows the conversion of the oxidation state from +1 to +2. It is found that for both the oxidation and the reduction processes the rearrangement proceeds in a concerted fashion via a single transition state. Energy paths involving stable decoordinated-coordinated intermediates are computed to be higher in energy. The cyclic voltammogram simulated using the computed transition theory state rate constants in solvent medium is in good agreement with the experimental voltammogram. Further, we report on the computed concentration change of stable (Cu(+)(4), Cu(2+)(5)) and metastable species (Cu(2+)(4), Cu(+)(5)) during single cyclic voltammetry (CV) cycle as a function of the applied voltage or time (the subscripts 4 and 5 refer to the coordination number of the copper center).

Quantitative formation of [4]pseudorotaxanes from two rods and two bis-macrocycles incorporating porphyrinic plates between the rings.

[4]pseudorotaxanes consisting of two very large coordinating bis-macrocycles and rigid rods incorporating two side-by-side chelates have been obtained quantitatively utilising the gathering and threading effect of copper(I); the assemblies obtained are several nanometres long and they contain two face-to-face zinc porphyrins which will be used to complex various organic substrates.

Cyclic [2]pseudorotaxane tetramers consisting of two rigid rods threaded through two bis-macrocycles: copper(I)-templated synthesis and X-ray structure studies.

Variously substituted coordinating rigid rods have been synthesized which incorporate a central 4,7-phenanthroline nucleus attached to two 2-pyridyl groups via its 3 and 8 positions, so as to yield bis-bidentate chelates, the two-coordinating axes of the chelates being parallel to one another. Regardless of the nature of the substituents borne by the rods, the copper(I)-induced threading reaction of two such rods through the rings of two bis-macrocycles affords in a quantitative yield the 4-copper(I) threaded assembly. The [2]pseudorotaxane tetramers thus obtained have been fully characterized in solution and, for one of them, an X-ray structure could be obtained, confirming the threaded nature of the complex and providing important structural information.

Iridium terpyridine complexes as functional assembling units in arrays for the conversion of light energy.

In photosynthesis, sunlight energy is converted into a chemical potential by an electron transfer sequence that is started by an excited state and ultimately yields a long-lived charge-separated state. This process can be reproduced by carefully designed multicomponent artificial arrays of three or more components, and the stored energy can be used to oxidize or reduce molecules in solution, to inject electrons or holes, or to create an electron flow. Therefore, the process is important both for artificial-photosynthesis research and for photovoltaic and optoelectronic applications. Molecular arrays for photoinduced charge separation often use chromophores that resemble the natural ones. However, new synthetic components, including transition metal complexes, have had some success. This Account discusses the use of bis-terpyridine (tpy) metal complexes as assembling and functional units of such multicomponent arrays. M(tpy)2(n+) complexes have the advantage of yielding linear arrays with unambiguous geometry. Originally, Ru(tpy)2(2+) and Os(tpy)2(2+) were used as photosensitizers in triads containing typical organic donors and acceptors. However, it soon became evident that the relatively low excited state of these complexes could act as an energy drain of the excited state of the photosensitizer and, thus, seriously compete with charge separation. A new metal complex that preserved the favorable tpy geometry and yet had a higher energy level was needed. We identified Ir(tpy)2(3+), which displayed a higher energy level, a more facile reduction that favored charge separation, a longer excited-state lifetime, and strong spectroscopic features that were useful for the identification of intermediates. Ir(tpy)2(3+) was used in arrays with electron-donating gold porphyrin and electron-accepting free-base porphyrins. A judicious change of the free-base porphyrin photosensitizer with zinc porphyrin allowed us to shape the photoreactivity and led to charge separation with unity yield and a lifetime on the order of a microsecond. In a subsequent approach, an Ir(tpy)2(3+) derivative was connected to an amine electron donor and a bisimide electron acceptor in an array 5 nm long. In this case, the complex acted as photosensitizer, and long-lived charge separation over the extremities (>100 micros, nearly independent of the presence of oxygen) was achieved. The efficiency of the charge separation was modest, but it was improved later, after a modification aiming at decoupling the donor and photosensitizer components. This study represents an example of how the performances of an artificial photofunctional array can be modeled by a judicious design assisted by a detailed knowledge of the systems.

Ruthenium-based light-driven molecular machine prototypes: synthesis and properties.

In the past years, many dynamic systems often referred to as "molecular machines" have been elaborated. They are generally set in motion by external stimuli like chemical, electrochemical, or photochemical reactions. Light irradiation seems particularly promising since the input signal can be switched on and off fast and readily on a very small place. In this tutorial review, we will highlight recent advances in the design and synthesis of various ruthenium(II) complexed rotaxanes, catenanes, scorpionates or macrocycles. In these compounds, one part of the system is set in motion by photochemically expelling a given chelate. We will discuss the behaviour of various topologically non-trivial systems like catenanes and rotaxanes as well as acyclic and macrocyclic models.

A [3]rotaxane with two porphyrinic plates acting as an adaptable receptor.

Following a multistep procedure, the copper(I)-templated strategy allowed preparation of a multifunctional [3]rotaxane. The dumbbell consists of a central two-bidentate chelate unit and two terminal stoppers. The two rings threaded on the rotaxane axis consist each of a 1,10-phenanthroline-incorporating macrocycle, rigidly connected to an appended zinc-complexed porphyrin. The copper(I) template can be removed, affording a free rotaxane whose two rings can glide freely along the axis and spin around it. The dumbbell being very long (approximately 85 A in its extended conformation from one stopper to the other), the porphyrin-porphyrin distance can be varied over a wide range. The two porphyrinic plates constitute the key elements of a receptor able to complex various guests between the plates. The ability of the threaded rings to move freely makes the host perfectly adjustable, allowing capture of geometrically very different guests. The copper(I)-complexed rotaxane also acts as an efficient receptor, although its adaptability is obviously more limited than that of its free rotaxane counterpart.