Sustainable valorization of pitaya (Hylocereus spp.) peel in a semi-continuous high-pressure hydrothermal process to recover value-added products.

This study evaluated the use of a semi-continuous high-pressure hydrothermal process for the recovery of value-added products from pitaya peel. The process was carried out at 15 MPa, a water flow rate of 2 mL/min, a solvent-to-feed ratio of 60 g water/g pitaya peel, and temperatures ranging from 40 to 210 °C. The results show that extraction temperatures (between 40 and 80 °C) promoted the recovery of betacyanin (1.52 mg/g), malic acid (25.6 mg/g), and citric acid (25.98 mg/g). The major phenolic compounds obtained were p-coumaric acid (144.63 ± 0.42 µg/g), protocatechuic acid (91.43 ± 0.32 µg/g), and piperonylic acid (74.2 ± 0.31 µg/g). The hydrolysis temperatures (between 150 and 210 °C) could produce sugars (18.09 mg/g). However, the hydrolysis process at temperatures above 180 °C generated Maillard reaction products, which increased the total phenolic compounds and antioxidant activity of the hydrolysates. Finally, the use of semi-continuous high-pressure hydrothermal process can be a sustainable and promising approach for the recovery of value-added compounds from pitaya peel, advocating a circular economy approach in the agri-food industry.

Assessment comparison of commercial TiO2 and TiO2 sol-gel on the degradation of caffeine using artificial radiation.

The presence of endocrine disrupting compounds in water receptor bodies, such as drugs, currently has in scientific field a great focus of studies focused on advanced water treatment techniques that enable the decontamination of water sources and public supply. In this context, this study focused on the characterization and evaluation of photocatalytic activity of catalysts calcined and uncalcined synthesized TiO2 and the commercial sol-gel route from caffeine degradation. The photocatalysts were characterized by N2 physisorption, X-ray diffraction, scanning electron microscopy (SEM/EDS), photoacoustic spectroscopy, and infrared spectroscopy (FTIR). They seek to evaluate the main textural, structural, chemical, and morphological differences that the method of synthesis can promote in obtaining a titanium oxide-based catalyst. Thus, the results of this study demonstrate that the synthesis method significantly influences the activity of the materials and that calcined TiO2 catalyst prepared using the sol-gel method has promising photocatalytic capabilities for the elimination of drugs such as caffeine when present in wastewater.

Photocatalytic Degradation of Textile dye Orange-122 Via Electrospray Mass Spectrometry

Abstract This work reports the study of the potential application of Zn/TiO2 catalysts, obtained by the sol-gel method, in processes of environmental decontamination through the reactions of photodegradation of textile dye, followed by electrospray mass spectrometry. The catalysts synthesis was performed according to a 2² factorial design with repetition at the central point. The characterization techniques used were: N2 adsorption measurements (BET method), scanning electron microscopy with energy dispersive X-ray (MEV/EDS), X-ray diffraction and point of zero charge (PZC). The photocatalytic tests were performed in batch in the presence of sunlight, and to evaluate the degradation kinetics study, a rapid direct injection electrospray mass spectrometry (DI-ESI-MS) method has been developed. By the photocatalytic tests, the calcination temperature of 400 °C has shown the best results of discoloration for the reactive Orange-122 dye (99.76%) in a reaction time of 2h. The discoloration kinetics were a pseudo-first order, and a statistical analysis was performed to investigate the effects of the variables and to optimize the conditions of discoloration to the dye. After the reactional time of 2 h, an ion of m/z 441.5 was detected by ESI-MS, indicating that the photocatalytic process was effective for the degradation of the dye to secondary compounds.

Evaluation of the effect of different treatment methods on sugarcane vinasse remediation.

Sugarcane vinasse is a by-product obtained during ethanol production in sugar-ethanol plants. For each 1 L of ethanol produced approximately 11 L of vinasse are generated. As this residue is obtained in high amounts, it is used as fertilizer in sugarcane crops. However, despite being rich in nutrients, sugarcane vinasse is approximately one hundred times more polluting than domestic sewage, making it an environmental problem. Thus, the aim of the present study was to propose a treatment sequence for sugarcane vinasse and evaluate the possibility of energetic use of the generated sludge in the coagulation/flocculation stage. pH, conductivity, turbidity and decreases in UV/Vis absorption spectra were determined for each treatment step. In addition, the upper calorific value of the generated sludge was also determined, while ash (adsorption treatment) and catalyst (heterogeneous photocatalysis) characterizations were also carried out. At the end of the treatment, initial vinasse turbidity was reduced by 100% and pH and conductivity values were stabilized. The sludge presented a higher calorific value of approximately 3,000 kcal kg-1 and the ash and catalyst displayed favorable characteristics to be applied to the sugarcane vinasse treatment stages.