CO2 leakage simulation: Effects of the decreasing pH to the survival and reproduction of two crustacean species.

The effects of CO2-related acidification on two crustacean populations, the isopod Cyathura carinata and the amphipod Elasmopus rapax, were studied. Three pH levels were tested: artificial seawater without CO2 injection and two levels of reduced pH. Even though RNA:DNA ratio was reduced for both species, no statistical significant differences were found between the control and the treatments. Both species experienced a reduction in survivorship, longevity and the body length of surviving animals; although the impairment observed in E. rapax was more severe than in C. carinata. The long life span isopod and the short life span amphipod experienced a high degree of impairment in the reproduction, likely due to the reallocation of resources from reproduction to body maintenance and increasing survival by postponing the brood production. Regardless of the underlying processes and the energetic pathways, both experienced failure to reproduce, which could lead to the local extinction of these species.

Intraspecific variation in the response of the estuarine European isopod Cyathura carinata (Krøyer, 1847) to ocean acidification.

In the present study the model isopod, Cyathura carinata were exposed to four pHNIST treatments (control: 7.9; 7.5, 7, 6.5) in order to determine the tolerance and pH threshold value this estuarine species withstand under future acidification scenarios. Seawater acidification significantly affected the lifespan of C. carinata, where population density was remarkably reduced at the lowest pH treatment. The longevity, survivorship and swimming activity (related to the acquisition of energy) of these isopods decreased with decreasing pH. Furthermore, to determine the possible metabolic plasticity of this species, the swimming activity, the Na+/K + -ATPase activity (relevant for osmoregulation process), and the RNA:DNA ratio (an indicator of fitness) were measure from two populations of C. carinata, one inhabiting a stable environment (pHNIST 7.5-8.0) and one inhabiting a fluctuating pCO2 regimes (pH 3.3-8.5) subjected to three pH treatments (7.9, 7.0 and 6.5). The population from high fluctuating pCO2 conditions showed capacity to withstand to pH 6.5, as well as higher longevity and metabolic plasticity, when compared with the population from the habitat with slight pCO2 variation. These results indicate that Cyathura population from stable environments could be vulnerable to ocean acidification because it could trigger detrimental effects on its survival energy budget, and growth. However, ocean acidification has limited effect on the energy budget and survival of C. carinata population from highly variable habitats, suggesting that they are able to cope with the elevated energy demand. The difference showed between populations is likely an indication of genetic differentiation in tolerance to ocean acidification, possibly attributable to local adaptations, which could provide the raw material necessary for adaptation to future conditions. In addition, our results suggest that when assessing marine crustacean responses to changing environments on a global scale, variability in population and metabolic responses need to be considered.

Wettability and friction control of a stainless steel surface by combining nanosecond laser texturing and adsorption of superhydrophobic nanosilica particles.

In this work, we present functionalization of AISI 316 L surfaces by nanosecond Nd:YAG laser texturing and adsorption of superhydrophobic fluoroalkylsilane functionalized 30-nm silica nanoparticles. Surface modification by varying the distance between laser-produced micro(µ)-channels leads to different surface roughnesses. After nanosilica coating, the superhydrophilic laser-textured surfaces change into superhydrophobic surfaces with the same µ-roughness. A higher µ-channel density leads to more hydrophobic surfaces after coating. This enables a study of the combined effect of surface wettability and morphology on the friction coefficient and wear resistance. Experiments were performed in dry and water environments. In the case of dry friction, increased µ-roughness leads to a higher friction coefficient, and the water-repellency modification by nanosilica particles has no influence on the tribological behaviour. In contrast, in the water environment, the wettability presents an important contribution to the properties of contact surfaces: hydrophobic surfaces exhibit a lower friction coefficient, especially at higher densities of µ-channels. Energy-dispersive X-ray spectroscopy analysis of surfaces before and after the tribological experiments is performed, revealing the difference in weight % of Si in the worn surface compared to the unworn surface, which varies according to the nature of the surface morphology due to laser texturing in both dry and water environments.

Lethal and sublethal responses in the clam Scrobicularia plana exposed to different CO2-acidic sediments.

One of the main impacts expected in CO2 leakage scenarios from carbon capture and storage in sub-seabed geological structures is the acidification of the environment. In the present work, laboratory-scale experiments were performed to investigate the effects of seawater acidification (pH 7.0, 6.5, 6.0, and control) in native clams (Scrobicularia plana) over 21 days of exposure. For this purpose, a battery of biomarkers (GSI, EROD, GST, GPX, LPO, and DNA damage) were analysed in the digestive glands of individuals collected on days 7, 14 and 21. Seawater acidification significantly affected the average life span of S. plana, and both the biomarkers analysed and the multivariate analysis approach demonstrated that seawater acidification induced a strong oxidative stress response in the clam. Oxidative stress overwhelmed the capacity of S. plana to defend its cells against it, resulting in DNA damage. Furthermore, the decline in the population of S. plana in their natural habitat could lead to a reduction in available food resources for avifauna, ichthyofauna, and for the local economy because this clam is a commercial species in the south of Europe.

Alterations in the macrobenthic fauna from Guadarranque River (Southern Spain) associated with sediment-seawater acidification deriving from CO2 leakage.

Nowadays, Carbon Storage in Sub-Seabed Geological Structures (CS-SSGS) is having much interest. Nonetheless, these technologies are still under development, especially the leakage of the stored CO2 and the consequent acidification of the environment. Therefore, the goal of this study is to test the impact of CO2-induced acidification on a macrobenthic community due to leakages from CS-SSGS using a mesocosm-based experiment. Results confirmed the significant correlation between the abundance of the species and the pH (positively), and the alkalinity (negatively). Additionally, the BIOENV analysis showed that the majority of the variability in the abundance of the total species was explained for the alkalinity. The correlation analysis showed differential vulnerabilities of different species, especially Cyathura carinata and a non-calcifier species as Hediste diversicolor. Nevertheless, these results showed the importance of taking into account the indirect effect associated with acidification processes, as metal release from sediment.

Several benthic species can be used interchangeably in integrated sediment quality assessment.

The selection of the best management option for contaminated sediments requires the biological assessment of sediment quality using bioindicator organisms. There have been comparisons of the performance of different test species when exposed to naturally occurring sediments. However, more research is needed to determine their suitability to be used interchangeably. The sensitivity of two amphipod species (Ampelisca brevicornis and Corophium volutator) to sediments collected from four different commercial ports in Spain was tested. For comparison the lugworm, Arenicola marina, which is typically used for bioaccumulation testing, was also tested. Chemical analyses of the sediments were also conducted. All species responded consistently to the chemical exposure tests, although the amphipods, as expected, were more sensitive than the lugworm. It was found that C. volutator showed higher vulnerability than A.brevicornis. It was concluded that the three species can be used interchangeably in the battery of tests for integrated sediment quality assessment.

Effective-medium theory of elastic waves in random networks of rods.

We formulate an effective medium (mean field) theory of a material consisting of randomly distributed nodes connected by straight slender rods, hinged at the nodes. Defining wavelength-dependent effective elastic moduli, we calculate both the static moduli and the dispersion relations of ultrasonic longitudinal and transverse elastic waves. At finite wave vector k the waves are dispersive, with phase and group velocities decreasing with increasing wave vector. These results are directly applicable to networks with empty pore space. They also describe the solid matrix in two-component (Biot) theories of fluid-filled porous media. We suggest the possibility of low density materials with higher ratios of stiffness and strength to density than those of foams, aerogels, or trabecular bone.

Morphometric changes in the human pulmonary acinus during inflation.

Despite decades of research into the mechanisms of lung inflation and deflation, there is little consensus about whether lung inflation occurs due to the recruitment of new alveoli or by changes in the size and/or shape of alveoli and alveolar ducts. In this study we use in vivo (3)He lung morphometry via MRI to measure the average alveolar depth and alveolar duct radius at three levels of inspiration in five healthy human subjects and calculate the average alveolar volume, surface area, and the total number of alveoli at each level of inflation. Our results indicate that during a 143 ± 18% increase in lung gas volume, the average alveolar depth decreases 21 ±5%, the average alveolar duct radius increases 7 ± 3%, and the total number of alveoli increases by 96 ± 9% (results are means ± SD between subjects; P < 0.001, P < 0.01, and P < 0.00001, respectively, via paired t-tests). Thus our results indicate that in healthy human subjects the lung inflates primarily by alveolar recruitment and, to a lesser extent, by anisotropic expansion of alveolar ducts.

Imaging alveolar-duct geometry during expiration via ³He lung morphometry.

Acinar geometry has been the subject of several morphological and imaging studies in the past; however, surprisingly little is known about how the acinar microstructure changes when the lung inflates or deflates. Lung morphometry with hyperpolarized (3)He diffusion MRI allows non-destructive evaluation of lung microstructure and acinar geometry, which has important applications in understanding basic lung physiology and disease. In this study, we have measured the alveolar and acinar duct sizes at physiologically relevant volumes by (3)He lung morphometry in six normal, excised, and unfixed canine lungs. Our results imply that, during a 37% decrease in lung volume, the acinar duct radius decreases by 19%, whereas the alveolar depth increases by 9% (P < 0.0001 and P < 0.05, respectively via paired t-tests with a Bonferroni correction). A comparison to serial sections under the microscope validates the imaging results and opens the door to in vivo human studies of lung acinar geometry and physiology during respiration using (3)He lung morphometry.

³He lung morphometry technique: accuracy analysis and pulse sequence optimization.

The (3)He lung morphometry technique (Yablonskiy et al., JAP, 2009), based on MRI measurements of hyperpolarized gas diffusion in lung airspaces, provides unique information on the lung microstructure at the alveolar level. 3D tomographic images of standard morphological parameters (mean airspace chord length, lung parenchyma surface-to-volume ratio, and the number of alveoli per unit lung volume) can be created from a rather short (several seconds) MRI scan. These parameters are most commonly used to characterize lung morphometry but were not previously available from in vivo studies. A background of the (3)He lung morphometry technique is based on a previously proposed model of lung acinar airways, treated as cylindrical passages of external radius R covered by alveolar sleeves of depth h, and on a theory of gas diffusion in these airways. The initial works approximated the acinar airways as very long cylinders, all with the same R and h. The present work aims at analyzing effects of realistic acinar airway structures, incorporating airway branching, physiological airway lengths, a physiological ratio of airway ducts and sacs, and distributions of R and h. By means of Monte-Carlo computer simulations, we demonstrate that our technique allows rather accurate measurements of geometrical and morphological parameters of acinar airways. In particular, the accuracy of determining one of the most important physiological parameter of lung parenchyma - surface-to-volume ratio - does not exceed several percent. Second, we analyze the effect of the susceptibility induced inhomogeneous magnetic field on the parameter estimate and demonstrate that this effect is rather negligible at B(0) ≤ 3T and becomes substantial only at higher B(0) Third, we theoretically derive an optimal choice of MR pulse sequence parameters, which should be used to acquire a series of diffusion-attenuated MR signals, allowing a substantial decrease in the acquisition time and improvement in accuracy of the results. It is demonstrated that the optimal choice represents three not equidistant b-values: b(1)=0, b(2)∼2 s/cm(2), b(3)∼8 s/cm(2).

Quantitative assessment of lung microstructure in healthy mice using an MR-based 3He lung morphometry technique.

The recently developed technique of lung morphometry using hyperpolarized (3)He diffusion magnetic resonance (MR) (Yablonskiy DA, Sukstanskii AL, Woods JC, Gierada DS, Quirk JD, Hogg JC, Cooper JD, Conradi MS. J Appl Physiol 107: 1258-1265, 2009) permits in vivo study of lung microstructure at the alveolar level. Originally proposed for human lungs, it also has the potential to study small animals. The technique relies on theoretical developments in the area of gas diffusion in lungs linking the diffusion attenuated MR signal to the lung microstructure. To adapt this technique to small animals, certain modifications in MR protocol and data analysis are required, reflecting the smaller size of mouse alveoli and acinar airways. This is the subject of the present paper. Herein, we established empirical relationships relating diffusion measurements to geometrical parameters of lung acinar airways with dimensions typical for mice and rats by using simulations of diffusion in the airways. We have also adjusted the MR protocol to acquire data with much shorter diffusion times compared with humans to accommodate the substantially smaller acinar airway length. We apply this technique to study mouse lungs ex vivo. Our MR-based measurements yield mean values of lung surface-to-volume ratio of 670 cm(-1), alveolar density of 3,200 per mm(3), alveolar depth of 55 µm, and mean chord length of 62 µm, all consistent with published data obtained histologically in mice by unbiased methods. The proposed technique can be used for in vivo experiments, opening a door for longitudinal studies of lung morphometry in mice and other small animals.

Janus nematic colloids driven by light.

We present an experimental analysis of different equilibrium orientations and light driven transformations of Janus particles in the nematic liquid crystal 5CB. Depending on the preparation technique of homeotropic (DMOAP) and planar (Au) hemispheres we have observed two types of director field configurations: dipolar-like in the case of Au/DMOAP capped colloids and boojum-like in the case of DMOAP/Au capped colloids. Using the manipulation of Au/DMOAP capped colloids with laser tweezers we report on light driven irreversible orientational transformations into Saturn-ring and a novel, boojum-ring configuration. On the contrary, boojum-like DMOAP/Au capped colloids can act as rotators when exposed to the laser filed. Observed rotation is continuous around an axis perpendicular to the laser beam axis, with the frequency increasing linearly with the laser power.

Colloids on free-standing smectic films.

We study the structure of a free-standing smectic-A film around a micron-size polystyrene colloid adsorbed onto the film. We find that a colloid or a cluster of colloids is surrounded by an optically distinct and radially decorated meniscus ending with a sharp edge. The observed strong and finite-range attraction between the adsorbed colloids is driven by the fusion of menisci. We interpret the structure of the smectic meniscus in terms of a model dominated by the surface free energy and we argue that the characteristic appearance of the meniscus is due to layer undulations.

Test of clock model in ellipsometric study of thin and thick free-standing films of an antiferroelectric liquid crystal.

The temperature dependences of the ellipsometric parameters in a weak dc external field are studied in thin and thick free-standing films of MHPOBC. The results for thin films consisting of two, three, and four layers are analyzed within the discrete phenomenological model. We find very good quantitative agreement between the theory and experiment, which indicates an odd-even effect. We find that the XY structures are stable for an odd number of layers, whereas planar, Ising-like structures are stable for an even number of layers. The experiments on thick (several tens of layers) films show a combination of bulklike and free-surface behavior. This is most pronounced at high temperatures, where the interior of the film is not tilted, whereas the layers at the air interfaces show qualitatively similar temperature dependance of the ellipsometric parameters as in the four-layer film.

Structures and phase transitions in thin free standing films of an antiferroelectric liquid crystal.

The premises of a discrete mean-field model for polar smectic liquid crystals are tested by analyzing the ellipsometric experiments on two, three, and four-layer freestanding films of MHPOBC. The measured temperature dependences of the ellipsometric parameters in a weak dc external field are compared to the predictions of a simple clock model. A very good quantitative agreement is found indicating an odd-even effect: XY structures are stable for odd and Ising-like structures for an even number of layers.

Sediment quality in the Guadalquivir estuary: lethal effects associated with the Aznalcóllar mining spill.

Monitoring from 1998 to 2001 has assessed the impact of the Aznalcóllar mining spill on the sediment quality in the Guadalquivir estuary. Chemical analysis has been completed with biological effects measured in different organisms. The toxicity of sediments obtained from dilutions of toxic mud and from environmental stations affected by the accidental spill was tested using the amphipod Ampelisca brevicornis and the clam Scrobicularia plana. The results obtained show that amphipods are more sensitive to the accidental spill than the clams. A dilution of clean sediment by more than 1.8% of toxic mud produced 100% mortality of amphipods. In GR2 station is detected toxicity to amphipods but not to clams. The rest of the environmental stations show no toxicity. Toxicity to amphipods in GR2 station decreased along time (from 50% to 60% of mortality in 1998 to 10 to 15% in 2001) and it can be associated with a recovery of the areas impacted by the accidental spill.

Structure and dynamics of freely suspended film of the smectic-C*alpha phase in an external transverse electric field.

We present a theoretical analysis of static and dynamic properties of freely suspended films of the smectic-C*alpha phase in an external electric field, applied along the smectic layers. The analysis is performed within the "clock" model, where the interactions up to next-nearest neighbors are considered. The calculated critical electric field for the unwinding of the smectic-C*alpha phase is of the order of several 100 V/mm and strongly depends on the interlayer interactions. The calculated relaxation rates of the eigenfluctuations of a system of N layers are in the kilohertz range for phase fluctuations and several megahertz for amplitude fluctuations.

MR imaging of diffusion of (3)He gas in healthy and diseased lungs.

Hyperpolarized (3)He gas MRI was used to form maps of the effective diffusivity of gas in human lungs. Images of diffusion as well as spin density are presented from a study of 11 healthy volunteers and 5 patients with severe emphysema. The effective rate of diffusion, D(e), of the gas is reduced by the alveolar walls; tissue destruction in emphysema is hypothesized to result in larger D(e). Indeed, the mean value of D(e) in the emphysematous lungs is found here to be about 2.5 times that of healthy lungs, although still smaller than the unrestricted diffusivity of (3)He in free air. Histograms of D(e) values across coronal slices are presented. The results are discussed in terms of spatial variations, variations among individuals, healthy and diseased, and variations due to changes in lung volume. Magn Reson Med 44:174-179, 2000.

Dynamic echo planar MR imaging of lung ventilation with hyperpolarized (3)He in normal subjects and patients with severe emphysema.

We applied the rapid imaging capability of echo planar MR pulse sequences and hyperpolarized (3)He ventilation imaging to observe the dynamic distribution of gas in the lungs during breathing. Findings in five normal volunteers (age 19-53 years) and four patients with severe smoking-related emphysema (age 56-71 years) were compared. All studies were performed on a 1.5 T whole body scanner using a 30 cm Helmholtz surface coil and 0.5 l of 20-40% polarized (3)He mixed with 1-2 l nitrogen. Our echo planar imaging pulse sequence allowed acquisition of each image in 0.04 s, with a pixel size of 7 mm(2) (TR = 40.5 ms, TE = 12.1 ms, flip angle = 22 degrees, echo train length = 32, matrix = 32 x 64, field of view = 225 x 450 mm, slice thickness = 10 mm). Imaging was performed in the transaxial plane repeatedly at 3, 10 or 20 evenly spaced levels, immediately before and during breathing of the gas mixture. In normal subjects during the first breath, (3)He appeared throughout each slice first in the mid lungs, then in the lower lungs, then in the upper lungs, with slightly greater signal in the dependent posterior regions. In patients with emphysema, sequential filling of different lung regions was seen during the first breath, with delayed filling of other regions observed during rebreathing and room air washout. We conclude that subsecond dynamic (3)He MR ventilation imaging can reveal normal and abnormal ventilation phenomena not seen with conventional scintigraphic methods, and offers another approach to the study of ventilation physiology and pathophysiology.