RESUMEN
We report on the realization and characterization of two different designs for resonant THz cavities, based on wire-grid polarizers as input/output couplers, and injected by a continuous-wave quantum cascade laser (QCL) emitting at 2.55 THz. A comparison between the measured resonators parameters and the expected theoretical values is reported. With achieved quality factor Q ≈ 2.5 × 10(5), these cavities show resonant peaks as narrow as few MHz, comparable with the typical Doppler linewidth of THz molecular transitions and slightly broader than the free-running QCL emission spectrum. The effects of the optical feedback from one cavity to the QCL are examined by using the other cavity as a frequency reference.
RESUMEN
Mid-infrared digital holography based on CO2 lasers has proven to be a powerful coherent imaging technique due to reduced sensitivity to mechanical vibrations, increased field of view, high optical power, and possible vision through scattering media, e.g., smoke. Here we demonstrate a similar and more compact holographic system based on an external cavity quantum cascade laser emitting at 8 µm. Such a setup, which includes a highly sensitive microbolometric camera, allows the acquisition of speckle holograms of scattering objects, which can be processed in real time. In addition, by exploiting the broad laser tunability, we can acquire holograms at different wavelengths, from which we extract phase images not subjected to phase wrapping, at synthetic wavelengths ranging from hundreds of micrometers to several millimeters.
RESUMEN
Optical frequency comb synthesizers have represented a revolutionary approach to frequency metrology, providing a grid of frequency references for any laser emitting within their spectral coverage. Extending the metrological features of optical frequency comb synthesizers to the terahertz domain would be a major breakthrough, due to the widespread range of accessible strategic applications and the availability of stable, high-power and widely tunable sources such as quantum cascade lasers. Here we demonstrate phase-locking of a 2.5 THz quantum cascade laser to a free-space comb, generated in a LiNbO(3) waveguide and covering the 0.1-6 THz frequency range. We show that even a small fraction (<100 nW) of the radiation emitted from the quantum cascade laser is sufficient to generate a beat note suitable for phase-locking to the comb, paving the way to novel metrological-grade terahertz applications, including high-resolution spectroscopy, manipulation of cold molecules, astronomy and telecommunications.
RESUMEN
We measure the absolute frequency of seven out of the nine allowed transitions between the 2 (3)S and 2 (3)P hyperfine manifolds in a metastable (3)He beam by using an optical frequency comb synthesizer-assisted spectrometer. The relative uncertainty of our measurements ranges from 1×10(-11) to 5×10(-12), which is, to our knowledge, the most precise result for any optical ^{3}He transition to date. The resulting 2 (3)P-2 (3)S centroid frequency is 276,702,827,204.8(2.4) kHz. Comparing this value with the known result for the (4)He centroid and performing ab initio QED calculations of the (4)He-(3)He isotope shift, we extract the difference of the squared nuclear charge radii δr(2) of (3)He and (4)He. Our result for δr(2)=1.074(3) fm(2) disagrees by about 4σ with the recent determination [R. van Rooij et al., Science 333, 196 (2011)].
RESUMEN
A laser system composed of two lasers phase-locked onto an Optical Frequency Comb Synthesizer (OFCS), operating around 1083 nm, was developed. An absolute frequency precision of 6x10(-13) at 1s, limited by the OFCS, was measured with a residual rms phase-noise of 71 mrad and 87 mrad for the two phase-locks, respectively. Multiplex spectroscopy on 1083 nm Helium transitions with this set-up is demonstrated. Generalization of this system to a larger number of OFCS assisted laser sources for wider frequency separations, even in other spectral regions, is discussed.
