RESUMEN
The Biomedical Imaging and Therapy facility of the Canadian Light Source comprises two beamlines, which together cover a wide X-ray energy range from 13â keV up to 140â keV. The beamlines were designed with a focus on synchrotron applications in preclinical imaging and veterinary science as well as microbeam radiation therapy. While these remain a major part of the activities of both beamlines, a number of recent upgrades have enhanced the versatility and performance of the beamlines, particularly for high-resolution microtomography experiments. As a result, the user community has been quickly expanding to include researchers in advanced materials, batteries, fuel cells, agriculture, and environmental studies. This article summarizes the beam properties, describes the endstations together with the detector pool, and presents several application cases of the various X-ray imaging techniques available to users.
RESUMEN
The activity of basic multicellular units (BMU) in cortical bone is classically described as a sequential order of events- resorption, reversal and formation. This simplified portrayal of the remodeling process is pervasive despite the reported variability in remodeling space morphology. These variations may reflect meaningful nuances in BMU activity but methods to quantify 3D remodeling space morphology within the context of the cellular activity are currently lacking. This study developed new techniques to define zones of BMU activity based on the 3D morphology of remodeling spaces in rabbit cortical bone and integrated morphological data with the BMU longitudinal erosion rate (LER) to elucidate the spatial-temporal coordination of BMUs and estimate mineral apposition rate (MAR). The tibiae of New Zealand white rabbits (n = 5) were imaged in vivo using synchrotron radiation and two weeks later ex vivo with desktop microCT. The in vivo and ex vivo datasets were co-registered, and 27 remodeling spaces were identified at both timepoints. A radial profile representing the 3D morphology was the platform for partitioning the remodeling spaces into resorption, reversal and formation zones. Manual, automated and semi-automated partitioning approaches were compared, and the zone-segmentations were used to calculate the length, change in radius and slope of each zone. The manual approach most accurately defined the zones of idealized remodeling spaces with known dimensions (relative error = 0.9-9.2 %) while the semi-automated method reliably defined the zones in rabbit remodeling spaces (ICC = 0.85-1.00). Combining LER and the manually derived zone dimensions indicated that a BMU passes through a cross-section in approximately 18.8 days with resorption, reversal and formation taking 4.1, 2.2, and 12.5 days, respectively. MAR estimated by the 3D analysis was not significantly different than that determined with classic histomorphometry (p = 0.48). These techniques have the potential to assess dynamic parameters of bone resorption and formation, eliminate the need for fluorochrome labeling and provide a more comprehensive perspective of the remodeling process.
Asunto(s)
Remodelación Ósea , Resorción Ósea , Animales , Conejos , Huesos , Hueso Cortical/diagnóstico por imagen , Tibia/diagnóstico por imagenRESUMEN
Accurate evaluation of morphological changes in articular cartilage are necessary for early detection of osteoarthritis (OA). 3T magnetic resonance imaging (MRI) has highly sensitive contrast resolution and is widely used clinically to detect OA. However, synchrotron radiation phase-contrast imaging computed tomography (SR-PCI) can also provide contrast to tissue interfaces that do not have sufficient absorption differences, with the added benefit of very high spatial resolution. Here, MRI was compared with SR-PCI for quantitative evaluation of human articular cartilage. Medial tibial condyles were harvested from non-OA donors and from OA patients receiving knee replacement surgery. Both imaging methods revealed that average cartilage thickness and cartilage volume were significantly reduced in the OA group, compared to the non-OA group. When comparing modalities, the superior resolution of SR-PCI enabled more precise mapping of the cartilage surface relative to MRI. As a result, MRI showed significantly higher average cartilage thickness and cartilage volume, compared to SR-PCI. These data highlight the potential for high-resolution imaging of articular cartilage using SR-PCI as a solution for early OA diagnosis. Recognizing current limitations of using a synchrotron for clinical imaging, we discuss its nascent utility for preclinical models, particularly longitudinal studies of live animal models of OA.
Asunto(s)
Cartílago Articular , Osteoartritis de la Rodilla , Intervención Coronaria Percutánea , Animales , Humanos , Cartílago Articular/diagnóstico por imagen , Osteoartritis de la Rodilla/diagnóstico por imagen , Sincrotrones , Imagen por Resonancia Magnética/métodos , Articulación de la Rodilla/diagnóstico por imagenRESUMEN
Basic Multicellular Units (BMUs) conduct bone remodeling, a critical process of tissue turnover which, if imbalanced, can lead to disease, including osteoporosis. Parathyroid hormone (PTH 1-34; Teriparatide) is an osteoanabolic treatment for osteoporosis; however, it elevates the rate of intra-cortical remodeling (activation frequency) leading, at least transiently, to increased porosity. The purpose of this study was to test the hypothesis that PTH not only increases the rate at which cortical BMUs are initiated but also increases their progression (Longitudinal Erosion Rate; LER). Two groups (n = 7 each) of six-month old female New Zealand white rabbits were both administered 30 µg/kg of PTH once daily for a period of two weeks to induce remodeling. Their distal right tibiae were then imaged in vivo by in-line phase contrast micro-CT at the Canadian Light Source synchrotron. Over the following two weeks the first group (PTH) received continued daily PTH while the second withdrawal group (PTHW) was administrated 0.9 % saline. At four weeks all animals were euthanized, their distal tibiae were imaged by conventional micro-CT ex vivo and histomorphometry was performed. Matching micro-CT datasets (in vivo and ex vivo) were co-registered in 3D and LER was measured from 612 BMUs. Counter to our hypothesis, mean LER was lower (p < 0.001) in the PTH group (30.19 ± 3.01 µm/day) versus the PTHW group (37.20 ± 2.77 µm/day). Despite the difference in LER, osteonal mineral apposition rate (On.MAR) did not differ between groups indicating the anabolic effect of PTH was sustained after withdrawal. The slowing of BMU progression by PTH warrants further investigation; slowed resorption combined with elevated bone formation rate, may play an important role in how PTH enhances coupling between resorption and formation within the BMU. Finally, the prolonged anabolic response following withdrawal may have utility in terms of optimizing clinical dosing regimens.
Asunto(s)
Osteoporosis , Hormona Paratiroidea , Conejos , Femenino , Animales , Hormona Paratiroidea/uso terapéutico , Tibia/diagnóstico por imagen , Densidad Ósea , Canadá , Osteoporosis/tratamiento farmacológico , Hueso CorticalRESUMEN
BACKGROUND: Bone tissue engineering, based on three-dimensional (3D) printing technology, has emerged as a promising approach to treat bone defects using scaffolds. The objective of this study was to investigate the influence of porosity and internal structure on the mechanical properties of scaffolds. METHODS: We fabricated composite scaffolds (which aimed to replicate trabecular bone) from polycaprolactone (PCL) reinforced with 30% (wt.) nano-hydroxyapatite (nHAp) by extrusion printing. Scaffolds with various porosities were designed and fabricated with and without an interlayer offset, termed as staggered and lattice structure, respectively. Mechanical compressive testing was performed to determine scaffold elastic modulus and yield strength. Linear regression was used to evaluate mechanical properties as a function of scaffold porosity. RESULTS: Different relationships between mechanical properties and porosities were noted for the staggered and lattice structures. For elastic moduli, the two relationships intersected (porosity = 55%) such that the lattice structure exhibited higher moduli with porosity values greater than the intersection point; vice versa for the staggered structure. The lattice structure exhibited higher yield strength at all porosities. Mechanical testing results also indicated elastic moduli and yield strength properties comparable to trabecular bone (elastic moduli: 14-165 MPa; yield strength: 0.9-10 MPa). CONCLUSIONS: Taken together, this study demonstrates that scaffolds printed from PCL/30% (wt.) nHAp with lattice and staggered structure offer promise for treating trabecular bone defects. This study identified the effect of porosity and internal structure on scaffold mechanical properties and provided suggestions for developing scaffolds with mechanical properties for substituting trabecular bone.
Asunto(s)
Sustitutos de Huesos , Durapatita , Durapatita/química , Andamios del Tejido/química , Poliésteres/química , Ingeniería de Tejidos/métodos , Porosidad , Impresión TridimensionalRESUMEN
BACKGROUND: Scaffolds are of great importance in tissue engineering applications as they provide a mechanically supportive environment for cellular activity, which is particularly necessary for hard tissues such as bone. Notably, the mechanical properties of a scaffold vary with differing design parameters such as those related to scaffold height and internal structure. Thus, the present study aimed to explore the relationship between design parameters and mechanical properties of composite polycaprolactone (PCL) and nano-hydroxyapatite (nHAp) scaffolds fabricated by three-dimensional (3D) printing. METHODS: We designed and printed scaffolds with different internal structures (lattice and staggered) and varying heights (4, 6, 8 and 10 layers), and consistent porosity (50%) for the purpose of comparison. Then, we examined the scaffold microstructure (pore size and penetration between layers) using scanning electron microscopy (SEM) and mechanical properties (elastic modulus and yield strength) using compressive testing. RESULTS: Our results illustrated that the microstructural parameters were related to scaffold design. At higher heights, pore size increased while penetration between layers decreased; thus, mechanical properties were affected. Results of mechanical testing demonstrated that for lattice scaffolds, elastic modulus was similar for 6 vs 4, and 8 vs 4 layers but ~33% lower for 10 layers vs 4 layers. Similarly, yield strength was comparable for 6 vs 4, and 8 vs 4 layers but ~27% lower for 10 layers vs 4 layers. With staggered scaffolds, when compared to 4-layer results, elastic modulus was similar for 6 layers but was ~43% lower for 8 layers and ~38% lower for 10 layers. Staggered scaffolds had ~38%, ~51%, and ~76% lower yield strength when the number of layers were increased from 4 to 6, 8, and 10 layers, respectively. When comparing lattice and staggered scaffolds with the same layer number, elastic modulus was similar, apart from 8-layer scaffolds where the staggered design was ~42% lower than lattice. Yield strength was similar between 4-layer staggered and lattice scaffolds, while staggered scaffolds with 6, 8, and 10 number of layers showed ~43%, ~45%, ~68% lower strength, respectively, than those found in lattice scaffolds with the same layer numbers. CONCLUSIONS: Mechanical properties of 3D printed scaffolds depended on scaffold height for both lattice and staggered internal structures. Staggered scaffolds had lower mechanical properties than the lattice scaffolds with the same height and were more sensitive to the change in scaffold height. Taken together, lattice scaffolds demonstrated the advantages of more stable mechanical properties over staggered scaffolds. Also, scaffolds with lower height were more promising in terms of mechanical properties compared to scaffolds with greater height.
Asunto(s)
Durapatita , Andamios del Tejido , Durapatita/química , Andamios del Tejido/química , Ingeniería de Tejidos/métodos , Huesos , Porosidad , Poliésteres/química , Impresión TridimensionalRESUMEN
OBJECTIVES: In modern bone biology, the term "remodeling" generally refers to internal bone turnover that creates secondary osteons. However, it is also widely used by skeletal biologists, including biological anthropologists as a catch-all term to refer to different skeletal changes. In this review, we investigated how "remodeling" is used across topics on skeletal biology in biological anthropology to demonstrate potential problems with such pervasive use of a generalized term. METHODS: Using PubMed and Google Scholar, we selected and reviewed 205 articles that use the term remodeling to describe skeletal processes and have anthropological implications. Nine edited volumes were also reviewed as examples of collaborative work by different experts to demonstrate the diverse and extensive use of the term remodeling. RESULTS: Four general meanings of bone "remodeling" were identified, namely, internal turnover, functional adaptation, fracture repair, and growth remodeling. Additionally, remodeling is also used to refer to a broad array of pathological skeletal changes. DISCUSSION: Although we initially identified four general meanings of bone remodeling, they are not mutually exclusive and often occur in combination. The term "remodeling" has become an extensively used catch-all term to refer to different processes and outcomes of skeletal changes, which inevitably lead to misunderstanding and a loss of information. Such ambiguity and confusion are potentially problematic as the field of biological anthropology becomes increasingly multidisciplinary. Therefore, we advocate for precise, context-specific definitions and explanations of bone remodeling as it continues to be used across disciplines within and beyond biological anthropology.
Asunto(s)
Antropología , Huesos , Huesos/diagnóstico por imagen , Remodelación ÓseaRESUMEN
Visualization of low-density tissue scaffolds made from hydrogels is important yet challenging in tissue engineering and regenerative medicine (TERM). For this, synchrotron radiation propagation-based imaging computed tomography (SR-PBI-CT) has great potential, but is limited due to the ring artifacts commonly observed in SR-PBI-CT images. To address this issue, this study focuses on the integration of SR-PBI-CT and helical acquisition mode (i.e. SR-PBI-HCT) to visualize hydrogel scaffolds. The influence of key imaging parameters on the image quality of hydrogel scaffolds was investigated, including the helical pitch (p), photon energy (E) and the number of acquisition projections per rotation/revolution (Np), and, on this basis, those parameters were optimized to improve image quality and to reduce noise level and artifacts. The results illustrate that SR-PBI-HCT imaging shows impressive advantages in avoiding ring artifacts with p = 1.5, E = 30â keV and Np = 500 for the visualization of hydrogel scaffolds in vitro. Furthermore, the results also demonstrate that hydrogel scaffolds can be visualized using SR-PBI-HCT with good contrast while at a low radiation dose, i.e. 342â mGy (voxel size of 26â µm, suitable for in vivo imaging). This paper presents a systematic study on hydrogel scaffold imaging using SR-PBI-HCT and the results reveal that SR-PBI-HCT is a powerful tool for visualizing and characterizing low-density scaffolds with a high image quality in vitro. This work represents a significant advance toward the non-invasive in vivo visualization and characterization of hydrogel scaffolds at a suitable radiation dose.
Asunto(s)
Sincrotrones , Andamios del Tejido , Tomografía Computarizada por Rayos X/métodos , Ingeniería de Tejidos/métodos , HidrogelesRESUMEN
Temporal aspects of ligand specificity have been shown to play a significant role in the case of pulsatile hormone secretion, as exemplified by parathyroid hormone (PTH) binding to its receptor (PTH1R), a G-protein-coupled receptor expressed on surfaces of osteoblasts and osteocytes. The latter binding reaction regulates intracellular signalling and subsequently modulates skeletal homeostasis via bone remodelling. PTH glandular secretion patterns dictate bone cellular activity. In healthy humans, 70% of PTH is secreted in a tonic fashion, whereas 30% is secreted in low-amplitude and high-frequency bursts occurring every 10-20 min, superimposed on the tonic secretion. Changes in the PTH secretion patterns have been associated with various bone diseases. In this paper, we analyse PTH glandular secretion patterns for healthy and pathological states and their link to bone cellular responsiveness (αR). We utilise a two-state receptor ligand binding model of PTH to PTH1R together with a cellular activity function which is able to distinguish various aspects of the stimulation signal including peak dose, time of ligand exposure, and exposure period. Formulating and solving several constrained optimisation problems, we investigate the potential of pharmacological manipulation of the diseased glandular secretion and via clinical approved external PTH injections to restore healthy bone cellular responsiveness. Based on the mean experimentally reported data, our simulation results indicate cellular responsiveness in healthy subjects is sensitive to the tonic baseline stimulus and it is 28% of the computed maximum responsiveness. Simulation results for pathological cases of glucocorticoid-induced osteoporosis, hyperparathyroidism, initial and steady state hypocalcemia clamp tests indicate αR values significantly larger than the healthy baseline (1.7, 2.2, 4.9 and 1.9-times, respectively). Manipulation of the pulsatile glandular secretion pattern, while keeping the mean PTH concentration constant, allowed restoration of healthy baseline values from these catabolic bone diseases. Conversely, PTH glandular diseases that led to maximum bone cellular responsiveness below the healthy baseline value can't be restored to baseline via glandular manipulation. However, external PTH injections allowed restoration of these latter cases.
Asunto(s)
Enfermedades Óseas , Hormona Paratiroidea , Humanos , Hormona Paratiroidea/metabolismo , Osteocitos/metabolismo , Ligandos , Progresión de la EnfermedadRESUMEN
Cellular communication in the mechanosensory osteocyte Lacuno-Canalicular Network (LCN) regulates bone tissue remodeling throughout life. Age-associated declines in LCN size and connectivity dysregulate mechanosensitivity to localized remodeling needs of aging or damaged tissue, compromising bone quality. Synchrotron radiation-based micro-Computed Tomography (SRµCT) and Confocal Laser Scanning Microscopy (CLSM) were employed to visualize LCN and vascular canal morphometry in an age series of the anterior femur (males n = 14, females n = 11, age range = 19-101, mean age = 55). Age-associated increases in vascular porosity were driven by pore coalescence, including a significant expansion in pore diameter and a significant decline in pore density. In contrast, the LCN showed significant age-associated reductions in lacunar volume fraction, mean diameter, and density, and in canalicular volume fraction and connectivity density. Lacunar density was significantly lower in females across the lifespan, exacerbating their age-associated decline. Canalicular connectivity density was also significantly lower in females but approached comparable declining male values in older age. Our data illuminate the trajectory and potential morphometric sources of age-associated bone loss. Increased vascular porosity contributes to bone fragility with aging, while an increasingly reduced and disconnected LCN undermines the mechanosensitivity required to repair and reinforce bone. Understanding why and how this degradation occurs is essential for improving the diagnosis and treatment of age-related changes in bone quality and fragility.
Asunto(s)
Huesos , Imagenología Tridimensional , Femenino , Humanos , Masculino , Adulto Joven , Adulto , Persona de Mediana Edad , Anciano , Anciano de 80 o más Años , Imagenología Tridimensional/métodos , Microtomografía por Rayos X , Fémur/diagnóstico por imagen , OsteocitosRESUMEN
The food industry has long been searching for an efficient replacement for saturated-fatty-acid-rich fats for baking applications. Although oleogels have been considered a potential alternative for saturated and trans fats, their success in food application has been poor. The present study explored the use of oleofoams obtained by whipping the pulse protein foam-templated oleogels for cake baking. Oleogels were prepared at room temperature by adding canola oil containing high-melting monoglyceride (MAG) or candelilla wax (CW) to the freeze-dried pea or faba bean protein-stabilized foams. Oleogels were then whipped to create the oleofoams; however, only the oleogels containing MAG could form oleofoams. CW-oleogel could not form any oleofoam. The most stable oleofoams with the highest overrun, stability, and storage modulus were obtained from 3% MAG+pulse protein foam-templated oleogels. The MAG plus protein foam-templated oleogels showed smaller and more packed air bubbles than MAG-only oleofoam, which was ascribed to the protein's ability to stabilize air bubbles and provide a network in the continuous oil phase to restrict air bubble movement. A novel batter preparation method for oleofoam was developed to increase air bubble incorporation. The X-ray microtomography images of the cakes showed a non-homogeneous distribution of larger air bubbles in the oleofoam cake compared to the shortening cake although their total porosity was not much different. The oleofoam cakes made with the new method yielded similar hardness and chewiness compared to the shortening cakes. By improving rheology and increasing air incorporation in the batter, high-quality cakes can be obtained with MAG-containing oleofoams made from pulse protein foam-templated oleogels.
RESUMEN
Simulated microgravity (SMG) inhibits osteoblast differentiation (OBD) and induces bone loss via the inhibition of the Wnt/ß-catenin pathway. However, the mechanism by which SMG alters the Wnt/ß-catenin pathway is unknown. We previously demonstrated that SMG altered the focal adhesion kinase (FAK)-regulated mTORC1, AMPK and ERK1/2 pathways, leading to the inhibition of tumor cell proliferation/metastasis and promoting cell apoptosis. To examine whether FAK similarly mediates SMG-dependent changes to Wnt/ß-catenin in osteoblasts, we characterized mouse MC3T3-E1 cells cultured under clinostat-modeled SMG (µg) conditions. Compared to cells cultured under ground (1 g) conditions, SMG reduces focal adhesions, alters cytoskeleton structures, and down-regulates FAK, Wnt/ß-catenin and Wnt/ß-catenin-regulated molecules. Consequently, protein-2 (BMP2), type-1 collagen (COL1), alkaline-phosphatase activity and matrix mineralization are all inhibited. In the mouse hindlimb unloading (HU) model, SMG-affected tibial trabecular bone loss is significantly reduced, according to histological and micro-computed tomography analyses. Interestingly, the FAK activator, cytotoxic necrotizing factor-1 (CNF1), significantly suppresses all of the SMG-induced alterations in MC3T3-E1 cells and the HU model. Therefore, our data demonstrate the critical role of FAK in the SMG-induced inhibition of OBD and bone loss via the Wnt/ß-catenin pathway, offering FAK signaling as a new therapeutic target not only for astronauts at risk of OBD inhibition and bone loss, but also osteoporotic patients.
Asunto(s)
Proteína-Tirosina Quinasas de Adhesión Focal , Osteoblastos , Ingravidez , Vía de Señalización Wnt , beta Catenina , Células 3T3 , Animales , Activación Enzimática , Quinasa 1 de Adhesión Focal/metabolismo , Proteína-Tirosina Quinasas de Adhesión Focal/metabolismo , Ratones , Osteoblastos/citología , Osteoblastos/metabolismo , Microtomografía por Rayos X , beta Catenina/metabolismoRESUMEN
Treating large bone defects, known as critical-sized defects (CSDs), is challenging because they are not spontaneously healed by the patient's body. Due to the limitations associated with conventional bone grafts, bone tissue engineering (BTE), based on three-dimensional (3D) bioprinted scaffolds, has emerged as a promising approach for bone reconstitution and treatment. Bioprinting technology allows for incorporation of living cells and/or growth factors into scaffolds aiming to mimic the structure and properties of the native bone. To date, a wide range of biomaterials (either natural or synthetic polymers), as well as various cells and growth factors, have been explored for use in scaffold bioprinting. However, a key challenge that remains is the fabrication of scaffolds that meet structure, mechanical, and osteoconductive requirements of native bone and support vascularization. In this review, we briefly present the latest developments and discoveries of CSD treatment by means of bioprinted scaffolds, with a focus on the biomaterials, cells, and growth factors for formulating bioinks and their bioprinting techniques. Promising state-of-the-art pathways or strategies recently developed for bioprinting bone scaffolds are highlighted, including the incorporation of bioactive ceramics to create composite scaffolds, the use of advanced bioprinting technologies (e.g., core/shell bioprinting) to form hybrid scaffolds or systems, as well as the rigorous design of scaffolds by taking into account of the influence of such parameters as scaffold pore geometry and porosity. We also review in-vitro assays and in-vivo models to track bone regeneration, followed by a discussion of current limitations associated with 3D bioprinting technologies for BTE. We conclude this review with emerging approaches in this field, including the development of gradient scaffolds, four-dimensional (4D) printing technology via smart materials, organoids, and cell aggregates/spheroids along with future avenues for related BTE.
RESUMEN
Ancestors of the Antarctic icefishes (family Channichthyidae) were benthic and had no swim bladder, making it energetically expensive to rise from the ocean floor. To exploit the water column, benthopelagic icefishes were hypothesized to have evolved a skeleton with "reduced bone," which gross anatomical data supported. Here, we tested the hypothesis that changes to icefish bones also occurred below the level of gross anatomy. Histology and micro-CT imaging of representative craniofacial bones (i.e., ceratohyal, frontal, dentary, and articular) of extant Antarctic fish species specifically evaluated two features that might cause the appearance of "reduced bone": bone microstructure (e.g., bone volume fraction and structure linear density) and bone mineral density (BMD, or mass of mineral per volume of bone). Measures of bone microstructure were not consistently different in bones from the icefishes Chaenocephalus aceratus and Champsocephalus gunnari, compared to the related benthic notothenioids Notothenia coriiceps and Gobionotothen gibberifrons. Some quantitative measures, such as bone volume fraction and structure linear density, were significantly increased in some icefish bones compared to homologous bones of non-icefish. However, such differences were rare, and no microstructural measures were consistently different in icefishes across all bones and species analyzed. Furthermore, BMD was similar among homologous bones of icefish and non-icefish Antarctic notothenioids. In summary, "reduced bone" in icefishes was not due to systemic changes in bone microstructure or BMD, raising the prospect that "reduced bone" in icefish occurs only at the gross anatomic level (i.e., smaller or fewer bones). Given that icefishes exhibit delayed skeletal development compared to non-icefish Antarctic fishes, combining these phenotypic data with genomic data might clarify genetic changes driving skeletal heterochrony.
Asunto(s)
Densidad Ósea , Perciformes , Animales , Regiones Antárticas , Peces/anatomía & histología , Perciformes/anatomía & histologíaRESUMEN
Bones represent a valuable biological archive of environmental lead (Pb) exposure for modern and archaeological populations. Synchrotron radiation X-ray fluorescence imaging (SR-XFI) generates maps of Pb in bone on a microstructural scale, potentially providing insights into an individual's history of Pb exposure and, in the context of archaeological bone, the biogenic or diagenetic nature of its uptake. The aims of this study were to (1) examine biogenic spatial patterns for Pb from bone samples of modern cadavers compared with patterns observed archaeologically, and (2) test the hypothesis that there are spatial differences in the distribution of Pb for diagenetic and biogenic modes of uptake in bone. To address these aims, this study used inductively coupled plasma-mass spectrometry (ICP-MS) and SR-XFI on unaltered and experimentally altered cadaveric bone samples (University of Saskatchewan, Saskatoon, SK) and archaeological bone samples from 18th to 19th century archaeological sites from Antigua and Lithuania. Bone concentrations of modern individuals are relatively low compared to those of archaeological individuals. SR-XFI results provide insights into modern Saskatchewan Pb exposure with some samples demonstrating a pattern of relatively low Pb exposure with higher levels of Pb exposure occurring in bone structures of a relatively older age that formed earlier in life, likely during the era of leaded gasoline (pre-1980s), and other samples demonstrating a pattern of fairly consistent, low-level exposure. Results support hypotheses for the spatial distribution of Pb corresponding to biogenic vs. diagenetic uptake. Diagenetic Pb is mainly confined to the periosteal surface of each sample with some enrichment of cracks and sub-periosteal canals. This may be useful in the future for differentiating diagenetic from biogenic Pb accumulation, analyzing environmental contamination, and informing sampling strategies in archaeological or fossil bone.
Asunto(s)
Plomo , Sincrotrones , Anciano , Arqueología , Humanos , Imagen Óptica , Rayos XRESUMEN
For humans and other mammals to eat effectively, teeth must develop properly inside the jaw. Deciphering craniodental integration is central to explaining the timely formation of permanent molars, including third molars which are often impacted in humans, and to clarifying how teeth and jaws fit, function and evolve together. A factor long-posited to influence molar onset time is the jaw space available for each molar organ to form within. Here, we tested whether each successive molar initiates only after a minimum threshold of space is created via jaw growth. We used synchrotron-based micro-CT scanning to assess developing molars in situ within jaws of C57BL/6J mice aged E10 to P32, encompassing molar onset to emergence. We compared total jaw, retromolar and molar lengths, and molar onset times, between upper and lower jaws. Initiation time and developmental duration were comparable between molar upper and lower counterparts despite shorter, slower-growing retromolar space in the upper jaw, and despite size differences between upper and lower molars. Timing of molar formation appears unmoved by jaw length including space. Conditions within the dental lamina likely influence molar onset much more than surrounding jaw tissues. We theorize that molar initiation is contingent on sufficient surface area for the physical reorganization of dental epithelium and its invagination of underlying mesenchyme.
RESUMEN
PURPOSE: The purpose of this study was to evaluate the efficacy and toxicity of a novel lanthanum compound, La(XT), in an ovariectomized (OVX) rat model of osteoporosis. METHODS: Twenty-four ovariectomized female Sprague Dawley rats were divided into 3 groups receiving a research diet with/without treatment compounds (alendronate: 3 mg/kg; La(XT) 100 mg/kg) for three months. At the time of sacrifice, the kidney, liver, brain, lung and spleen were collected for histological examination. The trabecular bone structure of the tibiae was evaluated using micro-CT and a three-point metaphyseal mechanical test was used to evaluate bone failure load and stiffness. RESULTS: No significant differences were noted in plasma levels of calcium, phosphorus, creatinine, alanine aminotransferase (ALT), and aspartate aminotransferase (AST) between the La(XT) treatment compared to the non-treated OVX group. Alendronate-treated animals (positive control) showed higher BV/TV, Tb.N and lower Tb.Th and Tb.Sp when compared to the non-treated OVX group. Mechanical analysis indicated that stiffness was higher in the alendronate (32.88%, p = 0.04) when compared to the non-treated OVX group. Failure load did not differ among the groups. CONCLUSIONS: No kidney or liver toxicities of La(XT) treatments were found during the three-month study. The absence of liver and kidney toxicity with drug treatment for 3 months, as well as the increased trabecular bone stiffness are encouraging for the pursuit of further studies with La(XT) for a longer duration of time.
RESUMEN
Given their strong affinity for the skeleton, trace elements are often stored in bones and teeth long term. Diet, geography, health, disease, social status, activity, and occupation are some factors which may cause differential exposure to, and uptake of, trace elements, theoretically introducing variability in their concentrations and/or ratios in the skeleton. Trace element analysis of bioarchaeological remains has the potential, therefore, to provide rich insights into past human lifeways. This review provides a historical overview of bioarchaeological trace element analysis and comments on the current state of the discipline by highlighting approaches with growing momentum. Popularity for the discipline surged following preliminary studies in the 1960s to 1970s that demonstrated the utility of strontium (Sr) as a dietary indicator. During the 1980s, Sr/Ca ratio and multi-element studies were commonplace in bioarchaeology, linking trace elements with dietary phenomena. Interest in using trace elements for bioarchaeological inferences waned following a period of critiques in the late 1980s to 1990s that argued the discipline failed to account for diagenesis, simplified complex element uptake and regulation processes, and used several unsuitable elements for palaeodietary reconstruction (e.g. those under homeostatic regulation, those without a strong affinity for the skeleton). In the twenty-first century, trace element analyses have been primarily restricted to Sr and lead (Pb) isotope analysis and the study of toxic trace elements, though small pockets of bioarchaeology have continued to analyse multiple elements. Techniques such as micro-sampling, element mapping, and non-traditional stable isotope analysis have provided novel insights which hold the promise of helping to overcome limitations faced by the discipline. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s12520-020-01262-4.
RESUMEN
BACKGROUND: It is known that a number of parameters can influence the post-printing properties of bone tissue scaffolds. Previous research has primarily focused on the effect of parameters associated with scaffold design (e.g., scaffold porosity) and specific scaffold printing processes (e.g., printing pressure). To our knowledge, no studies have investigated variations in post-printing properties attributed to the techniques used to synthesize the materials for printing (e.g., melt-blending, powder blending, liquid solvent, and solid solvent). METHODS: Four material preparation techniques were investigated to determine their influence on scaffold properties. Polycaprolactone/nano-hydroxyapatite 30% (wt.) materials were synthesized through melt-blending, powder blending, liquid solvent, and solid solvent techniques. The material printability and the properties of printed scaffolds, in terms of swelling/degradation, mechanical strength, morphology, and thermal properties, were examined and compared to one another using Kruskal-Wallis nonparametric statistical analysis. RESULTS: Material prepared through the liquid solvent technique was found to have limited printability, while melt-blended material demonstrated the highest degree of uniformity and lowest extent of swelling and degradation. Scaffolds prepared with powder-blended material demonstrated the highest Young's modulus, yield strength, and modulus of resilience; however, they also demonstrated the highest degree of variability. The higher degree of inhomogeneity in the material was further supported by thermal gravimetric analysis. While scaffolds printed from melt-blended, powder-blended, and solid solvent materials demonstrated a high degree of micro-porosity, the liquid solvent material preparation technique resulted in minimal micro-porosity. CONCLUSIONS: Study results indicate that specific techniques used to prepare materials influence the printing process and post-printing scaffold properties. Among the four techniques examined, melt-blended materials were found to be the most favorable, specifically when considering the combination of printability, consistent mechanical properties, and efficient preparation. Techniques determined to be favourable based on the properties investigated should undergo further studies related to biological properties and time-dependent properties beyond 21-days.
RESUMEN
OBJECTIVES: This research focused on osteoarthritis (OA) lesions on modern patients to 1) identify consistently observed lesions not included within current paleopathological measures of OA, 2) assess the correspondence of bone and cartilage lesions with clinical OA diagnostic criteria, and 3) discuss the correspondence of bone lesions with sources of pain reported in clinical literature. MATERIALS: Tibial plateaus from 62 patients undergoing total knee replacement surgery due to OA were examined. METHODS: Plateaus were scored for several non-standard OA criteria, including non-articular and X-ray visible lesions and pre-maceration cartilage lesions, as well as articular surface criteria standard in paleopathology. RESULTS: Proliferative bone in the intercondylar region was present in 95 % of specimens, while areas of dense trabecular bone and lytic defects, both on the inferior side of the plateaus, were present in 98 % and 83 %, respectively. CONCLUSIONS: The inferior lytic defects may be physical evidence of bone marrow lesions (BML), a clinical OA indicator visible via MRI. Previous research has linked BML to pain, inflammation, and ligament pathology. The latter conditions have also been associated with intercondylar enthesophytes and third intercondylar tubercle of Parsons (TITP), both of which were observed in the intercondylar regions. SIGNIFICANCE: Several non-articular lesions not currently included in paleopathological measures of OA were consistently observed. SUGGESTIONS FOR FUTURE RESEARCH: A similar analysis of a control sample of non-OA tibial plateaus would better contextualize these results. LIMITATIONS: The sample's high average age (65.8 years) and severe OA stage may hamper generalizability to archaeological collections.