Investigating the mechanism of phosphorene nanoribbon synthesis by discharging black phosphorus intercalation compounds.

Phosphorene nanoribbons (PNRs) can be synthesised in intrinsically scalable methods from intercalation of black phosphorus (BP), however, the mechanism of ribbonisation remains unclear. Herein, to investigate the point at which nanoribbons form, we decouple the two key synthesis steps: first, the formation of the BP intercalation compound, and second, the dissolution into a polar aprotic solvent. We find that both the lithium intercalant and the negative charge on the phosphorus host framework can be effectively removed by addition of phenyl cyanide to return BP and investigate whether fracturing to ribbons occurred after the first step. Further efforts to exfoliate mechanically with or without solvent reveal that the intercalation step does not form ribbons, indicating that an interaction between the amidic solvent and the intercalated phosphorus compound plays an important role in the formation of nanoribbons.

The local ordering of polar solvents around crystalline carbon nitride nanosheets in solution.

The crystalline graphitic carbon nitride, poly-triazine imide (PTI) is highly unusual among layered materials since it is spontaneously soluble in aprotic, polar solvents including dimethylformamide (DMF). The PTI material consists of layers of carbon nitride intercalated with LiBr. When dissolved, the resulting solutions consist of dissolved, luminescent single to multilayer nanosheets of around 60-125 nm in diameter and Li+ and Br- ions originating from the intercalating salt. To understand this unique solubility, the structure of these solutions has been investigated by high-energy X-ray and neutron diffraction. Although the diffraction patterns are dominated by inter-solvent correlations there are clear differences between the X-ray diffraction data of the PTI solution and the solvent in the 4-6 Å-1 range, with real space differences persisting to at least 10 Å. Structural modelling using both neutron and X-ray datasets as a constraint reveal the formation of distinct, dense solvation shells surrounding the nanoparticles with a layer of Br-close to the PTI-solvent interface. This solvent ordering provides a configuration that is energetically favourable underpinning thermodynamically driven PTI dissolution. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

Amphoteric dissolution of two-dimensional polytriazine imide carbon nitrides in water.

Crystalline two-dimensional carbon nitrides with polytriazine imide (PTI) structure are shown to act amphoterically, buffering both HCl and NaOH aqueous solutions, resulting in charged PTI layers that dissolve spontaneously in their aqueous media, particularly for the alkaline solutions. This provides a low energy, green route to their scalable solution processing. Protonation in acid is shown to occur at pyridinic nitrogens, stabilized by adjacent triazines, whereas deprotonation in base occurs primarily at basal plane NH bridges, although NH2 edge deprotonation is competitive. We conclude that mildly acidic or basic pHs are necessary to provide sufficient net charge on the nanosheets to promote dissolution, while avoiding high ion concentrations which screen the repulsion of like-charged PTI sheets in solution. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

Production of Magnetic Arsenic-Phosphorus Alloy Nanoribbons with Small Band Gaps and High Hole Conductivities.

Quasi-1D nanoribbons provide a unique route to diversifying the properties of their parent 2D nanomaterial, introducing lateral quantum confinement and an abundance of edge sites. Here, a new family of nanomaterials is opened with the creation of arsenic-phosphorus alloy nanoribbons (AsPNRs). By ionically etching the layered crystal black arsenic-phosphorus using lithium electride followed by dissolution in amidic solvents, solutions of AsPNRs are formed. The ribbons are typically few-layered, several micrometers long with widths tens of nanometers across, and both highly flexible and crystalline. The AsPNRs are highly electrically conducting above 130 K due to their small band gap (ca. 0.035 eV), paramagnetic in nature, and have high hole mobilities, as measured with the first generation of AsP devices, directly highlighting their properties and utility in electronic devices such as near-infrared detectors, quantum computing, and charge carrier layers in solar cells.

Influence of Dispersion Interactions on the Polymorphic Stability of Crystalline Oxides.

The accurate determination of relative phase stabilities using DFT methods is a significant challenge when some of these can vary by only a few kJ/mol. Here, we demonstrate that for a selection of oxides (TiO2, MnO2, and ZnO) the inclusion of dispersion interactions, accomplished using the DFT-D3 correction scheme, allows for the correct ordering and an improved calculation of the energy differences between polymorphic phases. The energetic correction provided is of the same order of magnitude as the energy difference between phases. D3-corrected hybrid functionals systematically yield results closest to experiment. We propose that the inclusion of dispersion interactions makes a significant contribution to the relative energetics of polymorphic phases, especially those with different densities, and should therefore be included for calculations of relative energies using DFT methods.

Approaching Theoretical Performances of Electrocatalytic Hydrogen Peroxide Generation by Cobalt-Nitrogen Moieties.

Electrocatalytic oxygen reduction reaction (ORR) has been intensively studied for environmentally benign applications. However, insufficient understanding of ORR 2 e- -pathway mechanism at the atomic level inhibits rational design of catalysts with both high activity and selectivity, causing concerns including catalyst degradation due to Fenton reaction or poor efficiency of H2 O2 electrosynthesis. Herein we show that the generally accepted ORR electrocatalyst design based on a Sabatier volcano plot argument optimises activity but is unable to account for the 2 e- -pathway selectivity. Through electrochemical and operando spectroscopic studies on a series of CoNx /carbon nanotube hybrids, a construction-driven approach based on an extended "dynamic active site saturation" model that aims to create the maximum number of 2 e- ORR sites by directing the secondary ORR electron transfer towards the 2 e- intermediate is proven to be attainable by manipulating O2 hydrogenation kinetics.

Band Structure Engineering of Bi4O4SeCl2 for Thermoelectric Applications.

The mixed anion material Bi4O4SeCl2 has an ultralow thermal conductivity of 0.1 W m-1 K-1 along its stacking axis (c axis) at room temperature, which makes it an ideal candidate for electronic band structure optimization via doping to improve its thermoelectric performance. Here, we design and realize an optimal doping strategy for Bi4O4SeCl2 from first principles and predict an enhancement in the density of states at the Fermi level of the material upon Sn and Ge doping. Experimental work realizes the as-predicted behavior in Bi4-x Sn x O4SeCl2 (x = 0.01) through the precise control of composition. Careful consideration of multiple accessible dopant sites and charge states allows for the effective computational screening of dopants for thermoelectric properties in Bi4O4SeCl2 and may be a suitable route for assessing other candidate materials.

Shock-formed carbon materials with intergrown sp3- and sp2-bonded nanostructured units.

Studies of dense carbon materials formed by bolide impacts or produced by laboratory compression provide key information on the high-pressure behavior of carbon and for identifying and designing unique structures for technological applications. However, a major obstacle to studying and designing these materials is an incomplete understanding of their fundamental structures. Here, we report the remarkable structural diversity of cubic/hexagonally (c/h) stacked diamond and their association with diamond-graphite nanocomposites containing sp3-/sp2-bonding patterns, i.e., diaphites, from hard carbon materials formed by shock impact of graphite in the Canyon Diablo iron meteorite. We show evidence for a range of intergrowth types and nanostructures containing unusually short (0.31 nm) graphene spacings and demonstrate that previously neglected or misinterpreted Raman bands can be associated with diaphite structures. Our study provides a structural understanding of the material known as lonsdaleite, previously described as hexagonal diamond, and extends this understanding to other natural and synthetic ultrahard carbon phases. The unique three-dimensional carbon architectures encountered in shock-formed samples can place constraints on the pressure-temperature conditions experienced during an impact and provide exceptional opportunities to engineer the properties of carbon nanocomposite materials and phase assemblages.

Low thermal conductivity in a modular inorganic material with bonding anisotropy and mismatch.

The thermal conductivity of crystalline materials cannot be arbitrarily low, as the intrinsic limit depends on the phonon dispersion. We used complementary strategies to suppress the contribution of the longitudinal and transverse phonons to heat transport in layered materials that contain different types of intrinsic chemical interfaces. BiOCl and Bi2O2Se encapsulate these design principles for longitudinal and transverse modes, respectively, and the bulk superlattice material Bi4O4SeCl2 combines these effects by ordering both interface types within its unit cell to reach an extremely low thermal conductivity of 0.1 watts per kelvin per meter at room temperature along its stacking direction. This value comes within a factor of four of the thermal conductivity of air. We demonstrated that chemical control of the spatial arrangement of distinct interfaces can synergically modify vibrational modes to minimize thermal conductivity.

Aquaporin-like water transport in nanoporous crystalline layered carbon nitride.

Designing next-generation fuel cell and filtration devices requires the development of nanoporous materials that allow rapid and reversible uptake and directed transport of water molecules. Here, we combine neutron spectroscopy and first-principles calculations to demonstrate rapid transport of molecular H2O through nanometer-sized voids ordered within the layers of crystalline carbon nitride with a polytriazine imide structure. The transport mechanism involves a sequence of molecular orientation reversals directed by hydrogen-bonding interactions as the neutral molecules traverse the interlayer gap and pass through the intralayer voids that show similarities with the transport of water through transmembrane aquaporin channels in biological systems. The results suggest that nanoporous layered carbon nitrides can be useful for developing high-performance membranes.

Probing Mg Intercalation in the Tetragonal Tungsten Bronze Framework V4Nb18O55.

While commercial Li-ion batteries offer the highest energy densities of current rechargeable battery technologies, their energy storage limit has almost been achieved. Therefore, there is considerable interest in Mg batteries, which could offer increased energy densities in comparison to Li-ion batteries if a high-voltage electrode material, such as a transition-metal oxide, can be developed. However, there are currently very few oxide materials which have demonstrated reversible and efficient Mg2+ insertion and extraction at high voltages; this is thought to be due to poor Mg2+ diffusion kinetics within the oxide structural framework. Herein, the authors provide conclusive evidence of electrochemical insertion of Mg2+ into the tetragonal tungsten bronze V4Nb18O55, with a maximum reversible electrochemical capacity of 75 mA h g-1, which corresponds to a magnesiated composition of Mg4V4Nb18O55. Experimental electrochemical magnesiation/demagnesiation revealed a large voltage hysteresis with charge/discharge (1.12 V vs Mg/Mg2+); when magnesiation is limited to a composition of Mg2V4Nb18O55, this hysteresis can be reduced to only 0.5 V. Hybrid-exchange density functional theory (DFT) calculations suggest that a limited number of Mg sites are accessible via low-energy diffusion pathways, but that larger kinetic barriers need to be overcome to access the entire structure. The reversible Mg2+ intercalation involved concurrent V and Nb redox activity and changes in crystal structure, as confirmed by an array of complementary methods, including powder X-ray diffraction, X-ray absorption spectroscopy, and energy-dispersive X-ray spectroscopy. Consequently, it can be concluded that the tetragonal tungsten bronzes show promise as intercalation electrode materials for Mg batteries.

The Role of Phosphate Group in Doped Cobalt Molybdate: Improved Electrocatalytic Hydrogen Evolution Performance.

The hydrogen evolution reaction (HER) is a critical process in the electrolysis of water. Recently, much effort has been dedicated to developing low-cost, highly efficient, and stable electrocatalysts. Transition metal phosphides are investigated intensively due to their high electronic conductivity and optimized absorption energy of intermediates in acid electrolytes. However, the low stability of metal phosphide materials in air and during electrocatalytic processes causes a decay of performance and hinders the discovery of specific active sites. The HER in alkaline media is more intricate, which requires further delicate design due to the Volmer steps. In this work, phosphorus-modified monoclinic ß-CoMoO4 is developed as a low-cost, efficient, and stable HER electrocatalyst for the electrolysis of water in alkaline media. The optimized catalyst shows a small overpotential of 94 mV to reach a current density of 10 mA cm-2 for the HER with high stability in KOH electrolyte, and an overpotential of 197 mV to reach a current density of 100 mA cm-2. Combined computational and in situ spectroscopic techniques show P is present as a surface phosphate ion; that electron holes localize on the surface ions and both (P-O1-) and Co3+-OH- are prospective surface active sites for the HER.

Diamond-Graphene Composite Nanostructures.

The search for new nanostructural topologies composed of elemental carbon is driven by technological opportunities as well as the need to understand the structure and evolution of carbon materials formed by planetary shock impact events and in laboratory syntheses. We describe two new families of diamond-graphene (diaphite) phases constructed from layered and bonded sp3 and sp2 nanostructural units and provide a framework for classifying the members of this new class of materials. The nanocomposite structures are identified within both natural impact diamonds and laboratory-shocked samples and possess diffraction features that have previously been assigned to lonsdaleite and postgraphite phases. The diaphite nanocomposites represent a new class of high-performance carbon materials that are predicted to combine the superhard qualities of diamond with high fracture toughness and ductility enabled by the graphitic units and the atomically defined interfaces between the sp3- and sp2-bonded nanodomains.

Modular Design via Multiple Anion Chemistry of the High Mobility van der Waals Semiconductor Bi4O4SeCl2.

Making new van der Waals materials with electronic or magnetic functionality is a chemical design challenge for the development of two-dimensional nanoelectronic and energy conversion devices. We present the synthesis and properties of the van der Waals material Bi4O4SeCl2, which is a 1:1 superlattice of the structural units present in the van der Waals insulator BiOCl and the three-dimensionally connected semiconductor Bi2O2Se. The presence of three anions gives the new structure both the bridging selenide anion sites that connect pairs of Bi2O2 layers in Bi2O2Se and the terminal chloride sites that produce the van der Waals gap in BiOCl. This retains the electronic properties of Bi2O2Se while reducing the dimensionality of the bonding network connecting the Bi2O2Se units to allow exfoliation of Bi4O4SeCl2 to 1.4 nm height. The superlattice structure is stabilized by the configurational entropy of anion disorder across the terminal and bridging sites. The reduction in connective dimensionality with retention of electronic functionality stems from the expanded anion compositional diversity.

Quantifying hexagonal stacking in diamond.

Diamond is a material of immense technological importance and an ancient signifier for wealth and societal status. In geology, diamond forms as part of the deep carbon cycle and typically displays a highly ordered cubic crystal structure. Impact diamonds, however, often exhibit structural disorder in the form of complex combinations of cubic and hexagonal stacking motifs. The structural characterization of such diamonds remains a challenge. Here, impact diamonds from the Popigai crater were characterized with a range of techniques. Using the MCDIFFaX approach for analysing X-ray diffraction data, hexagonality indices up to 40% were found. The effects of increasing amounts of hexagonal stacking on the Raman spectra of diamond were investigated computationally and found to be in excellent agreement with trends in the experimental spectra. Electron microscopy revealed nanoscale twinning within the cubic diamond structure. Our analyses lead us to propose a systematic protocol for assigning specific hexagonality attributes to the mineral designated as lonsdaleite among natural and synthetic samples.

Formation of an ion-free crystalline carbon nitride and its reversible intercalation with ionic species and molecular water.

The development of processes to tune the properties of materials is essential for the progression of next-generation technologies for catalysis, optoelectronics and sustainability including energy harvesting and conversion. Layered carbon nitrides have also been identified as of significant interest within these fields of application. However, most carbon nitride materials studied to date have poor crystallinity and therefore their properties cannot be readily controlled or easily related to their molecular level or nanoscale structures. Here we report a process for forming a range of crystalline layered carbon nitrides with polytriazine imide (PTI) structures that can be interconverted by simple ion exchange processes, permitting the tunability of their optoelectronic and chemical properties. Notable outcomes of our work are (a) the creation of a crystalline, guest-ion-free PTI compound that (b) can be re-intercalated with ions or molecules using "soft chemistry" approaches. This includes the intercalation of HCl, demonstrating a new ambient pressure route to the layered PTI·xHCl material that was previously only available by a high-pressure-high-temperature route (c). Our work also shows (d) that the intercalant-free (IF-) PTI material spontaneously absorbs up to 10 weight% H2O from the ambient atmosphere and that this process is reversible, leading to potential applications for membranes and water capture in dry environments.

Phase stability of intercalated V2O5 battery cathodes elucidated through the Goldschmidt tolerance factor.

Orthorhombic V2O5 is a promising Mg battery cathode material, and reversible intercalation in the layered α-phase has been claimed experimentally. However, these results, based on electrochemistry and XRD, are controversial. Previous computational studies have predicted high activation barriers (∼1 eV) for ionic migration in α-V2O5, although improved Mg2+ mobility is expected in the δ-phase. Here, hybrid-exchange density functional theory is used to discuss structure, stability and intercalation in the α and δ phases, beginning with a model system with MV2O5 stoichiometry, and varying ionic radius of the M cations. The relative stability of the two phases upon intercalation of M is rationalised through a tolerance factor-like behavioural trend, providing a framework for phase selection using intercalants of different ionic size. This tolerance factor behaviour is due to the presence of ferroelectrically distorted (2 × 2 × 2) perovskite blocks within the α-V2O5 structure. The δ-phase is found to undergo a barrierless phase change to α in fully charged (de-intercalated) MgxV2O5 (x = 0), indicating that stabilisation of δ-MgxV2O5 is required at low x if the δ phase is to be retained for higher Mg mobility. By employing dispersion interactions to accurately reproduce the interlayer distance, activation barriers for ion migration are found to be higher than reported in previous studies, clarifying questions regarding the extent of Mg intercalation that can be achieved experimentally. Interlayer ions are found to lower activation barriers for Mg2+ mobility by up to ∼330 meV in the α phase by expanding the interlayer space. The results address open questions about the electrochemical performance of orthorhombic V2O5 as Mg battery cathode material, and indicate atomic level mechanisms that activate ionic mobility in layered V2O5.

Fast Exfoliation and Functionalisation of Two-Dimensional Crystalline Carbon Nitride by Framework Charging.

Two-dimensional (2D) layered graphitic carbon nitride (gCN) nanosheets offer intriguing electronic and chemical properties. However, the exfoliation and functionalisation of gCN for specific applications remain challenging. We report a scalable one-pot reductive method to produce solutions of single- and few-layer 2D gCN nanosheets with excellent stability in a high mass yield (35 %) from polytriazine imide. High-resolution imaging confirmed the intact crystalline structure and identified an AB stacking for gCN layers. The charge allows deliberate organic functionalisation of dissolved gCN, providing a general route to adjust their properties.

Thermodynamics and defect chemistry of substitutional and interstitial cation doping in layered α-V2O5.

A systematic study of the location and energetics of cation dopants in α-V2O5 has been conducted using pair-potential methods, supplemented by first-principles calculations. The consequences of doping on intrinsic defect equilibria have been discussed and the effects of selected dopants on Li+ and Mg2+ diffusion energy barriers have been investigated.

Room Temperature Magnetically Ordered Polar Corundum GaFeO3 Displaying Magnetoelectric Coupling.

The polar corundum structure type offers a route to new room temperature multiferroic materials, as the partial LiNbO3-type cation ordering that breaks inversion symmetry may be combined with long-range magnetic ordering of high spin d5 cations above room temperature in the AFeO3 system. We report the synthesis of a polar corundum GaFeO3 by a high-pressure, high-temperature route and demonstrate that its polarity arises from partial LiNbO3-type cation ordering by complementary use of neutron, X-ray, and electron diffraction methods. In situ neutron diffraction shows that the polar corundum forms directly from AlFeO3-type GaFeO3 under the synthesis conditions. The A3+/Fe3+ cations are shown to be more ordered in polar corundum GaFeO3 than in isostructural ScFeO3. This is explained by DFT calculations which indicate that the extent of ordering is dependent on the configurational entropy available to each system at the very different synthesis temperatures required to form their corundum structures. Polar corundum GaFeO3 exhibits weak ferromagnetism at room temperature that arises from its Fe2O3-like magnetic ordering, which persists to a temperature of 408 K. We demonstrate that the polarity and magnetization are coupled in this system with a measured linear magnetoelectric coupling coefficient of 0.057 ps/m. Such coupling is a prerequisite for potential applications of polar corundum materials in multiferroic/magnetoelectric devices.