Digital workflow for image-guided immediate implant placement by using the socket-shield technique and custom abutment in the esthetic area.

Marginal bone loss around immediately placed implants may compromise esthetic outcomes in the anterior maxilla. The relatively recent socket-shield technique of partial extraction therapy has been described as being useful to maintain the structure of peri-implant tissues. The present technique report introduced a digital workflow to perform image-guided implant placement after partial extraction therapy. In this technique, digital 3-dimensional images are used to plan and orient the flapless surgical procedure and to digitally design a custom abutment based on the natural emergence profile as segmented from the tooth to be extracted.

Correlation among alveolar bone assessments provided by CBCT, micro-CT, and 14 T MRI.

OBJECTIVES: The aim of this study was to evaluate bone mineral adipose tissue (BMAT) volume in 21 alveolar bone specimens, as determined by 14 T MRI, and correlate them to the radiodensity values obtained pre-operatively of regions of interest (ROIs) by cone beam computed tomography (CBCT), and to the bone-volume-to-tissue-volume ratio values obtained by micro-CT, the gold-standard for morphometric data collection. METHODS: Partially edentulous patients were submitted to a CBCT scan, and the radiographic bone densities in each ROI were automatically calculated using coDiagnostiX software. Based on the CBCT surgical planning, a CAD/CAM stereolithographic surgical guide was fabricated to retrieve a bone biopsy from the same ROIs scanned preoperatively, and then to orientate the subsequent implant placement. The alveolar bone biopsies were then collected and scanned using the micro-CT and 14 T MRI techniques. Pearson's correlation test was performed to correlate the results obtained using the three different techniques. RESULTS: In the 21 eligible bone specimens (6 females, 15 males), age (mean age 52.9 years), micro-CT, and 14 T MRI variables were found to be normally distributed (p > 0.05). The strongest-and only statistically significant (p < 0.05)-correlation was found between micro-CT and 14 T MRI values (r = 0.943), and the weakest, between 14 T MRI and CBCT values (r = -0.068). CONCLUSIONS: The findings suggest that 14 T MRI can be used to evaluate BMAT as an indirect marker for bone volume, and that CBCT is not a reliable technique to provide accurate bone density values.

Estimating bone mineral density using MRI in medicine and dentistry: a literature review.

OBJECTIVES: Studies performed in the medical area have shown that an indirect diagnosis of bone mineral density (BMD) is feasible by assessing the amount of bone marrow fat with non-ionizing magnetic resonance imaging (MRI). In dentistry, radiographic methods are still the most used for alveolar bone diagnosis. The present literature review aimed at addressing the role of MRI in assessing BMD in medicine and dentistry. METHODS: MEDLINE and EMBASE databases were searched for articles published up to 2019. RESULTS: A total of 428 potentially eligible papers were screened. Of these, 397 were excluded after title, abstract and keyword assessment, yielding 31 papers that potentially met the inclusion criteria. Eleven studies were then excluded because their full texts did not discuss the role of MRI in the indirect diagnosis of BMD. As a result, a total of 20 studies were finally identified as eligible for inclusion in this literature review. Most studies found satisfactory accuracy of MRI for indirectly assessing BMD by quantifying bone mineral fat (BMF). However, only one of these studies was on dentistry. CONCLUSION: Within the limitations of this study, the present findings suggest that MRI is accurate to indirectly estimate bone density by assessing BMF, and could be clinically relevant during dental treatment planning.

Full Digital Workflow for Anterior Immediate Implants Using Custom Abutments.

The full digital workflow involves the combination of intraoral and cone beam computerized tomography scans. In the present case report, a second intraoral scan is performed after soft tissue management facilitated by the use of a 3-dimensional-printed interim implant restoration. The new STL file resulting from the second intraoral scan can be associated with the previous STL from the initial intraoral scan. The custom abutment was also digitally designed as an STL file, and no implant scan bodies were required for intraoral scanning.

Influence of receiver bandwidth on MRI artifacts caused by orthodontic brackets composed of different alloys.

PURPOSE: The aim of this in vitro study was to assess the role of bandwidth on the area of magnetic resonance imaging (MRI) artifacts caused by orthodontic appliances composed of different alloys, using different pulse sequences in 1.5 T and 3.0 T magnetic fields. MATERIALS AND METHODS: Different phantoms containing orthodontic brackets (ceramic, ceramic bracket with a stainless-steel slot, and stainless steel) were immersed in agar gel and imaged in 1.5 T and 3.0 T MRI scanners. Pairs of gradient-echo (GE), spin-echo (SE), and ultrashort echo time (UTE) pulse sequences were used differing in bandwidth only. The area of artifacts from orthodontic devices was automatically estimated from pixel value thresholds within a region of interest (ROI). Mean values for similar pulse sequences differing in bandwidth were compared at 1.5 T and 3.0 T using analysis of variance. RESULTS: The comparison of groups revealed a significant inverse association between bandwidth values and artifact areas of the stainless-steel bracket and the self-ligating ceramic bracket with a stainless-steel slot (P<0.05). The areas of artifacts from the ceramic bracket were the smallest, but were not reduced significantly in pulse sequences with higher bandwidth values (P<0.05). Significant differences were also observed between 1.5 T and 3.0 T MRI using SE and UTE, but not using GE 2-dimensional or 3-dimensional pulse sequences. CONCLUSION: Higher receiver bandwidth might be indicated to prevent artifacts from orthodontic appliances in 1.5 T and 3.0 T MRI using SE and UTE pulse sequences.

Correlation between magnetic resonance imaging and cone-beam computed tomography for maxillary sinus graft assessment.

PURPOSE: Little is known regarding the accuracy of clinical magnetic resonance imaging (MRI) protocols with acceptable scan times in sinus graft assessment. The aim of this study was to evaluate the correlations between MRI and cone-beam computed tomographic (CBCT) measurements of maxillary sinus grafts using 2 different clinical MRI imaging protocols. MATERIALS AND METHODS: A total of 15 patients who underwent unilateral sinus lift surgery with biphasic calcium phosphate were included in this study. CBCT, T1-weighted MRI, and T2-weighted MRI scans were taken 6 months after sinus lift surgery. Linear measurements of the maximum height and buccolingual width in coronal images, as well as the maximum anteroposterior depth in sagittal images, were performed by 2 trained observers using CBCT and MRI Digital Imaging and Communication in Medicine files. Microcomputed tomography (micro-CT) was also performed to confirm the presence of bone tissue in the grafted area. Correlations between MRI and CBCT measurements were assessed with the Pearson test. RESULTS: Significant correlations between CBCT and MRI were found for sinus graft height (T1-weighted, r=0.711 and P<0.05; T2-weighted, r=0.713 and P<0.05), buccolingual width (T1-weighted, r=0.892 and P<0.05; T2-weighted, r=0.956 and P<0.05), and anteroposterior depth (T1-weighted, r=0.731 and P<0.05; T2-weighted, r=0.873 and P<0.05). The presence of bone tissue in the grafted areas was confirmed via micro-CT. CONCLUSION: Both MRI pulse sequences tested can be used for sinus graft measurements, as strong correlations with CBCT were found. However, correlations between T2-weighted MRI and CBCT were slightly higher than those between T1-weighted MRI and CBCT.

Comparison between different cone-beam computed tomography devices in the detection of mechanically simulated peri-implant bone defects.

PURPOSE: This study compared 2 cone-beam computed tomography (CBCT) systems in the detection of mechanically simulated peri-implant buccal bone defects in dry human mandibles. MATERIALS AND METHODS: Twenty-four implants were placed in 7 dry human mandibles. Peri-implant bone defects were created in the buccal plates of 16 implants using spherical burs. All mandibles were scanned using 2 CBCT systems with their commonly used acquisition protocols: i-CAT Gendex CB-500 (Imaging Sciences, Hatfield, PA, USA; field of view [FOV], 8 cm×8 cm; voxel size, 0.125 mm; 120 kVp; 5 mA; 23 s) and Orthopantomograph OP300 (Intrumentarium, Tuusula, Finland; FOV, 6 cm×8 cm; voxel size, 0.085 mm; 90 kVp; 6.3 mA; 13 s). Two oral and maxillofacial radiologists assessed the CBCT images for the presence of a defect and measured the depth of the bone defects. Diagnostic performance was compared in terms of the area under the curve (AUC), accuracy, sensitivity, specificity, and intraclass correlation coefficient. RESULTS: High intraobserver and interobserver agreement was found (P<0.05). The OP300 showed slightly better diagnostic performance and higher detection rates than the CB-500 (AUC, 0.56±0.03), with a mean accuracy of 75.0%, sensitivity of 81.2%, and specificity of 62.5%. Higher contrast was observed with the CB-500, whereas the OP300 formed more artifacts. CONCLUSION: Within the limitations of this study, the present results suggest that the choice of CBCT systems with their respective commonly used acquisition protocols does not significantly affect diagnostic performance in detecting and measuring buccal peri-implant bone loss.

Impact of radiotherapy on mandibular bone: A retrospective study of digital panoramic radiographs.

PURPOSE: The purpose of this study was to investigate the impact of radiotherapy on mandibular bone tissue in head and neck cancer patients through an analysis of pixel intensity and fractal dimension values on digital panoramic radiographs. MATERIALS AND METHODS: Thirty patients with radiographic records from before and after 3-dimensional (3D) conformational radiotherapy were selected. A single examiner carried out digital analyses of pixel intensity values and fractal dimensions, with the areas of interest unilaterally located in the right angle medullary region of the mandible below the mandibular canal and posterior to the molar region. RESULTS: Statistically significant decreases were observed in the mean pixel intensity (P=0.0368) and fractal dimension (P=0.0495) values after radiotherapy. CONCLUSION: The results suggest that 3D conformational radiotherapy for head and neck cancer negatively affected the trabecular microarchitecture and mandibular bone mass.

Fully Digital Workflow with Magnetically Connected Guides for Full-Arch Implant Rehabilitation Following Guided Alveolar Ridge Reduction.

This technique report describes a fully digital workflow in which two surgical guides (i.e. one for alveolar bone reduction and the other for implant placement) are magnetically connected to ensure stability during full-arch implant surgery following guided bone reduction. Digital prosthesis design as well as virtual bone reduction and implant planning are developed from the superimposition of facial, intraoral and CBCT scans. With this technique, different surgical guides and interim poly(methylmethacrylate) (PMMA) fixed prosthesis are precisely connected with magnets after being digitally designed and 3D-printed. As a result, such magnetic connection allows for satisfactory stability of the implant surgical guide, as well as of the interim fixed PMMA fixed prosthesis during capture of screw-retained abutments.

Three dimensionally printed surgical guides for removing fixation screws from onlay bone grafts in flapless implant surgeries.

The present technique report describes a digital workflow for flapless implant surgery after onlay block bone graft healing in the esthetic area. Virtual removal of block fixation screws and optimal single-tooth implant position and digital crown waxing were planned from cone beam computed tomography (CBCT) and intraoral scans. Two different surgical guides were digitally designed and 3D-printed to allow for flapless implant surgery. The first surgical guide was used to remove all 3 fixation screws from a healed onlay block graft, whereas the second guide was used to determine the implant position and direction. The present methodology may be considered a time-efficient flapless approach for placing implants in sites with block grafts.

Clinical relevance of Digital Dentistry during COVID-19 outbreak: a scoped review

Aim: To perform a scoped literature review on advantages of digital workflows in dentistry that could be widely adopted to address safety issues raised during the coronavirus (COVID-19) pandemic. Methods: Recent studies on any advantages of digital dentistry ­ as compared to conventional methods ­ that could help addressing the new safety demands for dental treatments that emerged due to the current pandemic were included. PUBMED, Embase, and Web of Knowledge databases were searched for eligible articles published in the last five years. The guidelines of PRISMA statement were followed during data extraction and evaluation. Results: The present search strategy yielded 181 publications. After application of exclusion criteria, a total of 34 studies were finally considered eligible to be discussed. Among the most important advantages of digital dentistry that contribute to safety during the current pandemic are: reduced number of clinical appointments required, shorter chairside time, less invasive surgeries and safer procedures. Conclusion: Within the limitations of this study, the findings observed herein suggest that the use of digital workflows in dentistry could lead to increased safety and reduced transmission of COVID-19 during the current pandemic

Comparison of Pixel Values of Maxillary Sinus Grafts and Adjacent Native Bone With Cone-Beam Computed Tomography.

PURPOSE: Pixel values from cone-beam computed tomography (CBCT) are proportional to bone density. This study aimed to correlate and compare pixel values of healed maxillary sinus grafts and adjacent native bone (NB). MATERIAL AND METHODS: This study was conducted on CBCT scan patients referred for maxillary sinus floor augmentation with biphasic calcium phosphate (n = 31). Graft height and width measurements were performed. In addition, mean pixel values were calculated in 3 different regions: NB, sinus graft close to NB (CNB), and sinus graft far from NB (FNB). Micro-CT and histological analyses of bone specimens of a representative case were also performed. RESULTS: Significant correlations were found between CNB and graft height (r = 0.41; P < 0.021); and FNB and graft width (r = 0.519, P < 0.003). In addition, pixel values from both graft groups (CNB and FNB) differed significantly (P < 0.001). Finally, histological sections revealed smaller areas with newly formed bone in the FNB area. CONCLUSIONS: Within the limitations of this study, the present findings suggest that pixel values of sinus grafted areas are directly correlated with the extension of the grafted area.

Correlation between index panoramic radiomorfometric and primary stability of implants / Correlação entre índices radiomorfométricos panorâmicos e estabilidade primária de implantes

ABSTRACT Objective: To evaluate the correlation between panoramic radiomorphometric index of bone density, stability quotient and the insertion torque of the implant. Methods: A total of 97 implants were analyzed. Panoramic radiographs calculated the Panoramic Mandibular Index and the Mental Index, in addition to the evaluation of the Mandibular Cortical Index. The insertion torque and the stability quotient of the implant were recorded during the surgical moment. The correlation analysis between the variables described above was performed using the Spearman test, at a significance level of 5%. Results: Significant correlations were found between age and mandibular cortical index (p = 0.000 and r = 0.429), insertion torque and age (p = 0.011 and r = 0.263), stability quotient of the implant in the Vestibulo-Lingual direction and The mesio-distal direction (p = 0.000 and r = 0.582), mandibular and mental panoramic index (p = 0.000 and r = 0.809), mandibular and mental cortical index (p = 0.005 and r = -0.288) and mandibular cortical index Mandibular panoramic view (p = 0.000 and r = -0.366). All other correlations were not significant (p <0.05). Conclusion: The results of this work suggest that the panoramic radiomorphometric indices may contribute to the pre-diagnosis of the primary stability of dental implants.

RESUMO Objetivo: Avaliar a correlação entre índices radiomorfométricos panorâmicos de densidade óssea, quociente de estabilidade e o torque de inserção do implante. Métodos: Foi analisado um total de 97 implantes. Nas radiografias panorâmicas, foram calculados os índices Panorâmico Mandibular e o índice Mentual, além da avaliação do índice Cortical Mandibular. O torque de inserção e o quociente de estabilidade do implante foram registrados durante o momento cirúrgico. A análise de correlação entre as variáveis descritas acima foi realizada com por meio do teste de Spearman, a um nível de significância de 5%. Resultados: Foram encontradas correlações significantes entre as variáveis idade e o índice Cortical Mandibular (p=0.000 e r=0.429), torque de inserção e a idade (p=0.011 e r=0.263), quociente de estabilidade do implante na direção Vestibulo-Lingual e a direção Mesio-Distal (p=0.000 e r=0.582), índice panorâmico mandibular e o mentual (p=0.000 e r= 0.809), índice cortical mandibular e o mentual (p=0.005 e r=-0.288) e índice cortical mandibular e o panorâmico mandibular (p=0.000 e r=-0.366). Todas as outras correlações não foram significantes (p<0.05). Conclusão: Os resultados deste trabalho sugerem que os índices radiomorfométricos panorâmicos podem contribuir para o pré-diagnóstico da estabilidade primária de implantes dentários.

Comparison of conventional imaging techniques and CBCT for periodontal evaluation: A systematic review.

PURPOSE: This study aimed to carry out a systematic review of studies in the literature comparing conventional imaging techniques with cone-beam computed tomography in terms of the role of these techniques for assessing any of the following periodontal conditions and parameters: infrabony defects, furcation involvement, height of the alveolar bone crest, and the periodontal ligament space. MATERIALS AND METHODS: Interventional and observational studies comparing conventional imaging techniques with cone-beam computed tomography were considered eligible for inclusion. The MEDLINE and Embase databases were searched for articles published through 2017. The PRISMA statement was followed during data assessment and extraction. RESULTS: The search strategy yielded 351 publications. An initial screening of the publications was performed using abstracts and key words, and after the application of exclusion criteria, 13 studies were finally identified as eligible for review. CONCLUSION: These studies revealed cone-beam computed tomography to be the best imaging technique to assess infrabony defects, furcation lesions, the height of the alveolar bone crest, and the periodontal ligament space.

Assessment of alveolar bone marrow fat content using 15 T MRI.

OBJECTIVES: Bone marrow fat is inversely correlated with bone mineral density. The aim of this study is to present a method to quantify alveolar bone marrow fat content using a 15 T magnetic resonance imaging (MRI) scanner. STUDY DESIGN: A 15 T MRI scanner with a 13-mm inner diameter loop-gap radiofrequency coil was used to scan seven 3-mm diameter alveolar bone biopsy specimens. A 3-D gradient-echo relaxation time (T1)-weighted pulse sequence was chosen to obtain images. All images were obtained with a voxel size (58 µm3) sufficient to resolve trabecular spaces. Automated volume of the bone marrow fat content and derived bone volume fraction (BV/TV) were calculated. Results were compared with actual BV/TV obtained from micro-computed tomography (CT) scans. RESULTS: Mean fat tissue volume was 20.1 ± 11%. There was a significantly strong inverse correlation between fat tissue volume and BV/TV (r = -0.68; P = .045). Furthermore, there was a strong agreement between BV/TV derived from MRI and obtained with micro-CT (interclass correlation coefficient = 0.92; P = .001). CONCLUSIONS: Bone marrow fat of small alveolar bone biopsy specimens can be quantified with sufficient spatial resolution using an ultra-high-field MRI scanner and a T1-weighted pulse sequence.

Comparison of the diagnostic performance of panoramic and occlusal radiographs in detecting submandibular sialoliths.

PURPOSE: The aim of this study was to assess and compare the diagnostic performance of panoramic and occlusal radiographs in detecting submandibular sialoliths. MATERIALS AND METHODS: A total of 40 patients (20 cases and 20 controls) were included in this retrospective study. Cases were defined as subjects with a submandibular sialolith confirmed by computed tomography (CT), whereas controls did not have any submandibular calcifications. Three observers with different expertise levels assessed panoramic and occlusal radiographs of all subjects for the presence of sialoliths. Intraobserver and interobserver agreement were assessed using the kappa test. Sensitivity, specificity, accuracy, positive and negative predictive values, and the diagnostic odds ratio of panoramic and occlusal radiographs in screening for submandibular sialoliths were calculated for each observer. RESULTS: The sensitivity and specificity values for occlusal and panoramic radiographs all ranged from 80% to 100%. The lowest values of sensitivity and specificity observed among the observers were 82.6% and 80%, respectively (P=0.001). Intraobserver and interobserver agreement were higher for occlusal radiographs than for panoramic radiographs, although panoramic radiographs demonstrated a higher overall accuracy. CONCLUSION: Both panoramic and occlusal radiographic techniques displayed satisfactory diagnostic performance and should be considered before using a CT scan to detect submandibular sialoliths.

Diagnostic performance of fractal dimension and radiomorphometric indices from digital panoramic radiographs for screening low bone mineral density

A number of panoramic radiographic measurements have been associated with osteoporotic alterations. However, little is known about the differences in sensitivity and specificity among these measurements for screening low bone mineral density (BMD). Aim: To correlate and compare precision, sensitivity and specificity of panoramic radiomorphometric indices and fractal dimension (FD) for screening low BMD (i.e. osteopenia and osteoporosis). Methods: Sixty-eight female patients (42.78±15.59 years) were included in this study. Body mass index (BMI), mandibular cortical index (MCI), mandibular cortical width (MCW), FD and connectivity (C) were assessed. Low BMD was diagnosed by peripheral dual-energy X-ray absorptiometry (p-DXA). Non-parametric correlations were assessed among all variables. In addition, sensitivity and specificity of MCI, MCW and FD were estimated for screening low BMD. Results: Significant correlation was found between FD and BMI (p=0.013; r=0.269). In addition, FD was the most sensitive method for screening low BMD (70.8%, p=0.001). FD and MCI presented a significant and relatively high sensitivity, whereas MCW presented a high specificity for screening low systemic BMD Conclusions: Among the analyzed methods, FD and MCI offer a significant and relatively high sensitivity, whereas MCW offers a high specificity for screening low BMD (Au)

Reliability and Reproducibility of Manual and Automated Volumetric Measurements of Periapical Lesions.

INTRODUCTION: The present study aimed to test the reliability and reproducibility of 2 methods: manual and automated segmentation (using a threshold-based region growing algorithm) for measuring the volume of periapical lesions. METHODS: A total of 43 cone-beam computed tomographic scans (14 men and 29 women, mean age of 54.6 ± 8.5 years) were analyzed by 3 observers. Intraobserver reproducibility and interobserver reliability were assessed using the intraclass correlation coefficient. Parametric correlation between manual and automated volumetric measurements was performed. In addition, the Student t test was also used to compare the mean time required for manual and automated volumetric measurements. RESULTS: Automated segmentation showed slightly higher intraclass correlation coefficient values for all observers. A strong significant correlation was found between manual and automated volumetric measurements performed by the 3 observers. A significant difference in the mean procedure time was also found between both methods (P = .001). CONCLUSIONS: Within the limitations of this study, the present results suggest that automated segmentation with a region growing algorithm is faster and slightly more reliable to calculate the volume of periapical lesions.