Application of texture analysis methods for the characterization of cultured meat.

Mechanical characterization supposes a key step in the development of cultured meat to help mimicking the sensorial properties of already existing commercial products based on traditional meat. This work presents two well stablished methods that can help studying cultured meat mechanical characteristics: texture profile analysis (double compression test) and rheology. These techniques provide data about the elastic and viscous behaviour of the samples but also values about other texture characteristics such as springiness, cohesiveness, chewiness and resilience. In this work, we present a comparison of cultured meat-based samples with commercial of the shelf common meat products (sausage, turkey and chicken breast). Results show that both Young's and Shear modulus in the cultured meat samples can be compared to commercial products in order to understand its properties. The texture characteristics for the cultured meat studied, show values within the range of commercial products. These results demonstrate the applicability of this methodology for the adjustment of mechanical properties of cultured meat products.

Depositing Molecular Graphene Nanoribbons on Ag(111) by Electrospray Controlled Ion Beam Deposition: Self-Assembly and On-Surface Transformations.

The chemical processing of low-dimensional carbon nanostructures is crucial for their integration in future devices. Here we apply a new methodology in atomically precise engineering by combining multistep solution synthesis of N-doped molecular graphene nanoribbons (GNRs) with mass-selected ultra-high vacuum electrospray controlled ion beam deposition on surfaces and real-space visualisation by scanning tunnelling microscopy. We demonstrate how this method yields solely a controllable amount of single, otherwise unsublimable, GNRs of 2.9 nm length on a planar Ag(111) surface. This methodology allows for further processing by employing on-surface synthesis protocols and exploiting the reactivity of the substrate. Following multiple chemical transformations, the GNRs provide reactive building blocks to form extended, metal-organic coordination polymers.

Collecting up to 115% of Singlet-Fission Products by Single-Walled Carbon Nanotubes.

In this contribution, we focused on integrating a phenylene-bridged dibenzodiazahexacene dimer (o-DAD), which is singlet fission (SF) active, onto single-walled carbon nanotubes (SWCNTs) as a low-energy sink for energetically low lying excited states that stem from SF. Spectroscopic and microscopic assays assisted in documenting that SWCNT/o-DAD feature high stability in THF as a result of electronic interactions between the individual constituents. For example, statistical Raman analysis underlined n-doping of SWCNTs in the presence of o-DAD. Fluorescence spectroscopy prompted an energy transfer between the individual constituents, a conclusion that was exclusively derived from the quenching of the o-DAD-centered fluorescence. Excitation spectroscopy with a focus on the SWCNT fluorescence confirmed independently this conclusion by showing o-DAD-centered features. Our work was rounded off by time-resolved transient absorption measurements with SWCNT/o-DAD, in which evidence was gathered for the sequential o-DAD-centered SF with an efficiency of 112% followed by a unidirectional energy transfer from o-DAD to SWCNT and a rapid deactivation. The energy transfer efficiency from SF products such as (S1S0)CT and 1(T1T1) exceeded the 100% threshold with values of 115%, which is conventionally found in energy transfer schemes.

Singlet Fission in Pyrene-Fused Azaacene Dimers.

Singlet fission has emerged as a promising strategy to avoid the loss of extra energy through thermalization in solar cells. A family of dimers consisting of nitrogen-doped pyrene-fused acenes that undergo singlet fission with triplet quantum yields as high as 125 % are presented. They provide new perspectives for nitrogenated polycyclic aromatic hydrocarbons and for the design of new materials for singlet fission.

Giant Star-Shaped Nitrogen-Doped Nanographenes.

Star-shaped nanographenes (SNGs) are large monodisperse polycyclic aromatic hydrocarbons that are larger than a nanometer and have shown a lot of promise in a wide range of applications including electronics, energy conversion, and sensing. Herein, we report a new family of giant star-shaped N-doped nanographenes with diameters up to 6.5 nm. Furthermore, the high solubility of this SNG family in neutral organic solvents at room temperature allowed a complete structural, optoelectronic, and electrochemical characterisation, which together with charge transport studies illustrate their n-type semiconducting character.

A thiadiazole-capped nanoribbon with 18 linearly fused rings.

Polycyclic aromatic hydrocarbons that extend over 2 nm in one dimension are seen as monodisperse graphene nanoribbons, which have attracted significant attention for a broad range of applications in organic electronics and photonics. Herein we report the synthesis of a stable bisthiadiazole-capped pyrene-containing nanoribbon with 18 linearly fused rings (NR-18-TD). Thanks to the presence of alternating tert-butyl and tri-iso-butylsilyl groups, NR-18-TD is highly soluble in organic solvents and therefore its structure and fundamental optoelectronic, redox and electrical properties could be unambiguously established. This work illustrates that NR-18-TD is a promising soluble NR-based n-type semiconductor for applications in organic electronics.

Tuning the ease of formation of on-surface metal-adatom coordination polymers featuring diketones.

We use pyrene-4,5,9,10-tetraketone molecules with substituents of varying bulkiness in the 2,7 positions to probe the generality and versatility of the previously reported on-surface coordination of two diketones with a single metal atom, leading to one-dimensional coordination polymers. Three different low index surfaces of group 11 metals (Cu, Ag and Au) are used to provide both the support and the metal atoms for metal-organic coordination. By real space visualisation with single molecule resolution employing scanning tunnelling microscopy we investigate the molecular self-assembly and show how this can be substantiated with the formation of metal-organic linear and cyclic oligomers, depending on the employed substrate.

Monodisperse N-Doped Graphene Nanoribbons Reaching 7.7 Nanometers in Length.

The properties of graphene nanoribbons are highly dependent on structural variables such as width, length, edge structure, and heteroatom doping. Therefore, atomic precision over all these variables is necessary for establishing their fundamental properties and exploring their potential applications. An iterative approach is presented that assembles a small and carefully designed molecular building block into monodisperse N-doped graphene nanoribbons with different lengths. To showcase this approach, the synthesis and characterisation of a series of nanoribbons constituted of 10, 20 and 30 conjugated linearly-fused rings (2.9, 5.3, and 7.7 nm in length, respectively) is presented.

Twisted Aromatic Frameworks: Readily Exfoliable and Solution-Processable Two-Dimensional Conjugated Microporous Polymers.

Twisted two-dimensional aromatic frameworks have been prepared by overcrowding the nodes with bulky and rigid substituents. The highly distorted aromatic framework with alternating out-of-plane substituents results in diminished interlayer interactions that favor the exfoliation and dispersion of individual layers in organic media.

Enhancement of the Performance of Perovskite Solar Cells, LEDs, and Optical Amplifiers by Anti-Solvent Additive Deposition.

The efficiency of perovskite optoelectronic devices is increased by a novel method; its suitability for perovskite solar cells, light-emitting diodes, and optical amplifiers is demonstrated. The method is based on the introduction of organic additives during the anti-solvent step in the perovskite thin-film deposition process. Additives passivate grain boundaries reducing non-radiative recombination. The method can be easily extended to other additives.

Bisthiadiazole-Fused Tetraazapentacenequinone: An Air-Stable Solution-Processable n-Type Organic Semiconductor.

The synthesis and characterization of a tetraazapentacenequinone fused to two thiadiazoles is reported. This linear derivative constituting seven fused rings shows a very low LUMO level (-4.46 eV) and a low HOMO-LUMO gap (1.77 eV). Its high solubility, endowed by four triisopropylsilyl groups, allows the fabrication of air-stable field-effect transistors by liquid deposition methods that show electron mobilities up to 2.42 × 10(-3) cm(2) V(-1) s(-1) without any device optimization.

An electron-conducting pyrene-fused phenazinothiadiazole.

A pyrene-fused phenazinothiadiazole that shows electron mobilities (µe = 0.016 cm(2) V(-1) s(-1)) two orders of magnitude higher than those reported for pyrene-fused pyrazaacenes is described.

An Air-Stable DPP-thieno-TTF Copolymer for Single-Material Solar Cell Devices and Field Effect Transistors.

Following an approach developed in our group to incorporate tetrathiafulvalene (TTF) units into conjugated polymeric systems, we have studied a low band gap polymer incorporating TTF as a donor component. This polymer is based on a fused thieno-TTF unit that enables the direct incorporation of the TTF unit into the polymer, and a second comonomer based on the diketopyrrolopyrrole (DPP) molecule. These units represent a donor-acceptor copolymer system, p(DPP-TTF), showing strong absorption in the UV-visible region of the spectrum. An optimized p(DPP-TTF) polymer organic field effect transistor and a single material organic solar cell device showed excellent performance with a hole mobility of up to 5.3 × 10(-2) cm(2)/(V s) and a power conversion efficiency (PCE) of 0.3%, respectively. Bulk heterojunction organic photovoltaic devices of p(DPP-TTF) blended with phenyl-C71-butyric acid methyl ester (PC71BM) exhibited a PCE of 1.8%.

Solution processable diketopyrrolopyrrole (DPP) cored small molecules with BODIPY end groups as novel donors for organic solar cells.

Two novel triads based on a diketopyrrolopyrrole (DPP) central core and two 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) units attached by thiophene rings have been synthesised having high molar extinction coefficients. These triads were characterised and used as donor materials in small molecule, solution processable organic solar cells. Both triads were blended with PC71BM as an acceptor in different ratios by wt % and their photovoltaic properties were studied. For both the triads a modest photovoltaic performance was observed, having an efficiency of 0.65%. Moreover, in order to understand the ground and excited state properties and vertical absorption profile of DPP and BODIPY units within the triads, theoretical DFT and TDDFT calculations were performed.

Synthesis and properties of novel star-shaped oligofluorene conjugated systems with BODIPY cores.

Star-shaped conjugated systems with varying oligofluorene arm length and substitution patterns of the central BODIPY core have been synthesised, leading to two families of compounds, T-B1-T-B4 and Y-B1-Y-B4, with T- and Y-shaped motifs, respectively. Thermal stability, cyclic voltammetry, absorption and photoluminescence spectroscopy of each member of these two families were studied in order to determine their suitability as emissive materials in photonic applications.