Controlled silver electrodeposition on gold nanoparticle antibody tags for ultrasensitive prostate specific antigen sensing using electrochemical and optical smartphone detection.

One of the current challenges in medicine is to achieve a rapid and unequivocal detection and quantification of extremely low levels of disease biomarkers in complex biological samples. Here, we present the development and analytical evaluation of a low-cost smartphone-based system designed for ultrasensitive detection of the prostate-specific antigen (PSA) using two detection alternatives: electrochemical or optical, by coupling the smartphone with a portable potentiostat or magnifying lenses. An antibody tagged with gold nanoparticles (AuNPs), and indium tin oxide coated polyethylene terephthalate platform (ITO-PET) have been used to develop a sandwich-type immunoassay. Then, a controlled silver electrodeposition on the AuNPs surface is carried out, enhancing their size greatly. Due to such strong nanoparticle-size amplification (from nm to µm), the final detection can be dual, by measuring current intensity or the number of silver-enlarged microstructures generated. The proposed strategies exhibited limit detections (LOD) of 102 and 37 fg/mL for electrochemical and optical detection respectively. The developed immunosensor reaches excellent selectivity and performance characteristics to quantify biomarkers at clinically relevant values without any pretreatment. These proposed procedures could be useful to check and verify possible recurrence after clinical treatment of tumors or even report levels of disease serum biomarkers in early stages.

Progress and Challenge of Sensors for Dairy Food Safety Monitoring.

One of the most consumed foods is milk and milk products, and guaranteeing the suitability of these products is one of the major concerns in our society. This has led to the development of numerous sensors to enhance quality controls in the food chain. However, this is not a simple task, because it is necessary to establish the parameters to be analyzed and often, not only one compound is responsible for food contamination or degradation. To attempt to address this problem, a multiplex analysis together with a non-directed (e.g., general parameters such as pH) analysis are the most relevant alternatives to identifying the safety of dairy food. In recent years, the use of new technologies in the development of devices/platforms with optical or electrochemical signals has accelerated and intensified the pursuit of systems that provide a simple, rapid, cost-effective, and/or multiparametric response to the presence of contaminants, markers of various diseases, and/or indicators of safety levels. However, achieving the simultaneous determination of two or more analytes in situ, in a single measurement, and in real time, using only one working 'real sensor', remains one of the most daunting challenges, primarily due to the complexity of the sample matrix. To address these requirements, different approaches have been explored. The state of the art on food safety sensors will be summarized in this review including optical, electrochemical, and other sensor-based detection methods such as magnetoelastic or mass-based sensors.

A plasmonic MNAzyme signal amplification strategy for quantification of miRNA-4739 breast cancer biomarker.

A major challenge in the 21st century is the development of point-of-care diagnostic tools capable to detect and quantify disease biomarkers in a straightforward, affordable, sensitive, and specific manner. The remarkable plasmonic properties of gold nanoparticles (AuNPs) have promoted their use for development of simple methodologies for nucleic acid detection in combination with a variety of oligonucleotides amplification techniques. Here, assemblies of AuNPs with Multicomponent Nucleic Acid enzymes (MNAzymes) has been successfully used in the design of a highly sensitive and simple bioassay for rapid spectroscopic detection and quantification of miRNA-4739 in blood samples. The miRNA selected is a doxorubicin chemoresistant biomarker in breast cancer which overexpression promotes the proliferation, progression, and survival of cancer cells. In this work, two alternatives experimental designs, based on use of MNAzymes and AuNPs, have been optimized and applied for sensitive miRNA-4739 quantification: one based on a traditional direct measurement of wavelength shift and a second non-conventional simple approach based on isolation and measurement of free nanoparticles absorbance. Improvement in sensitivity and, higher measurement accuracy and precision were achieved with the second approach. The developed bioassay provides a detection limit as low as 7 pmolL-1 for miRNA-4739 quantification and performed satisfactory selectivity and well practical applicability by analysis of the miRNA-4739 in blood, demonstrating that the proposed strategy is a promising and suitable spectroscopic method for breast cancer diagnosis thought liquid biopsy of circulating tumoral cells.

Functionalized heteroatom-doped carbon dots for biomedical applications: A review.

Carbon nanoparticles (CDs) have recently drawn a great attention in (bio)chemical analysis, sensing and bioimaging owing to their photostability, water stability, minimal toxicity, biocompatibility and ease of surface functionalization. While the vast majority of CDs applications rely on exploiting their fluorescent properties, doping such nanomaterials with various elements has recently received increasing attention as an effective approach to modify their optoelectronic characteristics, introducing novel improved optical features such as phosphorescence, upconversion luminescence or multimodal imaging capabilities. This review article focuses in the recent advances on the synthesis of heteroatom-doped CDs, exhibiting distinctive features of high value for sensing and imaging, as well as various functionalization schemes developed for guided analyte labeling. Relevant applications in chemical sensing, bioimaging and disease therapy are here presented. A final section intends to provide an overview towards future developments of such emerging light-emitting nanomaterials in the design of future devices and strategies for (bio)analytical chemistry.

Relative and Transport Efficiency-Independent Approach for the Determination of Nanoparticle Size Using Single-Particle ICP-MS.

Herein, we introduce the first relative single-particle inductively coupled plasma mass spectrometry (spICP-MS) approach where size calibration is carried out using the target NP itself measured under different instrumental conditions without external dependence on the complex and prone-to-error determination of transport efficiency or mass flux calibrations, in contrast to most spICP-MS approaches. The simple approach proposed allows determining gold nanoparticle (AuNP) sizes, with errors ranging from 0.3 to 3.1% (corroborated by HR-TEM). It has been demonstrated that the changes observed in the single-particle histograms obtained for a suspension of AuNPs under different sensitivity conditions (n = 5) are directly and exclusively related to the mass (size) of the target AuNP itself. Interestingly, the relative nature of the approach shows that once the ICP-MS system has been calibrated with a generic NP standard, it is no longer necessary to repeat the calibration for the size determination of different unimetallic NPs carried out along time (at least 8 months), independently of their size (16-73 nm) and even nature (AuNP or AgNP). Additionally, neither the NP surface functionalization with biomolecules nor protein corona formation led to significant changes (relative errors slightly increased 1.3- to 1.5-fold, up to 7%) in the NP size determination, in contrast to conventional spICP-MS approaches where relative errors increased 2- to 8-fold, up to 32%. This feature could be especially valuable for the analysis of NPs in real samples without the need of matrix-matched calibration.

Impact of Potentially Toxic Compounds in Cow Milk: How Industrial Activities Affect Animal Primary Productions.

Potentially toxic elements (PTEs) and polycyclic aromatic hydrocarbons (PAHs) frequently coexist in soils near industrial areas and sometimes in environmental compartments directly linked to feed (forage) and food (milk) production. However, the distribution of these pollutants along the dairy farm production chain is unclear. Here, we analyzed soil, forage, and milk samples from 16 livestock farms in Spain: several PTEs and PAHs were quantified. Farms were compared in terms of whether they were close to (<5 km) or far away from (>5 km) industrial areas. The results showed that PTEs and PAHs were enriched in the soils and forages from farms close to industrial areas, but not in the milk. In the soil, the maximum concentrations of PTEs reached 141, 46.1, 3.67, 6.11, and 138 mg kg-1 for chromium, arsenic, cadmium, mercury, and lead, respectively, while fluoranthene (172.8 µg kg-1) and benzo(b)fluoranthene (177.4 µg kg-1) were the most abundant PAHs. Principal component analysis of the soil PTEs suggested common pollution sources for iron, arsenic, and lead. In the forage, the maximum contents of chromium, arsenic, cadmium, mercury, and lead were 32.8, 7.87, 1.31, 0.47, and 7.85 mg kg-1, respectively. The PAH found in the highest concentration in the feed forage was pyrene (120 µg kg-1). In the milk, the maximum PTE levels were much lower than in the soil or the feed forages: 74.1, 16.1, 0.12, 0.28, and 2.7 µg kg-1 for chromium, arsenic, cadmium, mercury, and lead, respectively. Neither of the two milk samples exceeded the 20 µg kg-1 limit for lead set in EU 1881/2006. Pyrene was the most abundant PAH found in the milk (39.4 µg kg-1), while high molecular weight PAHs were not detected. For PTEs, the results showed that soil-forage transfer factors were higher than forage-milk ratios. Our results suggest that soils and forages around farms near industries, as well as the milk produced from those farms, have generally low levels of PTE and PAH contaminants.

The Potential of ICP-MS as a Complementary Tool in Nanoparticle-Protein Corona Analysis.

The prolific applicability of nanomaterials has made them a common citizen in biological systems, where they interact with proteins forming a biological corona complex. These complexes drive the interaction of nanomaterials with and within the cells, bringing forward numerous potential applications in nanobiomedicine, but also arising toxicological issues and concerns. Proper characterization of the protein corona complex is a great challenge typically handled with the combination of several techniques. Surprisingly, despite inductively coupled plasma mass spectrometry (ICP-MS) being a powerful quantitative technique whose application in nanomaterials characterization and quantification has been consolidated in the last decade, its application to nanoparticle-protein corona studies is scarce. Furthermore, in the last decades, ICP-MS has experienced a turning point in its capabilities for protein quantification through sulfur detection, hence becoming a generic quantitative detector. In this regard, we would like to introduce the potential of ICP-MS in the nanoparticle protein corona complex characterization and quantification complementary to current methods and protocols.

AF4-UV/VIS-MALS-ICPMS/MS for the characterization of the different nanoparticulated species present in oligonucleotide-gold nanoparticle conjugates.

In-depth characterization of functionalized nanomaterials is still a remaining challenge in nanobioanalytical chemistry. In this work, we propose the online coupling of Asymmetric Flow Field-Flow Fractionation (AF4) with UV/Vis, Multiangle Light Scattering (MALS) and Inductively Coupled Plasma-Tandem Mass Spectrometry (ICP-MS/MS) detectors to carry out, in less than 10 min and directly in the functionalization reaction mixture, the complete characterization of gold nanoparticles (AuNPs) functionalized with oligonucleotides and surface-modified with polyethylene glycol (PEG). AF4 separation provided full separation of the bioconjugates from the original AuNPs while P/Au and S/Au ICP-MS/MS ratios in the bioconjugate fractographic peaks could be used to compute the corresponding stoichiometries, oligonucleotide/AuNP and PEG/AuNPs. MALS detection clearly showed the coexistence of two distinct nanoparticulated populations in the bioconjugation mixture, which were demonstrated to be different not only in size but in functionality as well. The major bioconjugate population showed lower hydrodynamic ratios (18 nm) with higher and steadier oligonucleotides/AuNPs (92) and PEG/AuNPs (2350) stoichiometries, in comparison to the minor abundant population (54 nm, 51 and 1877, respectively). Moreover, the ratio between the absorbance signals measured at 520 nm and 650 nm reflects a lower AuNP aggregation in the major (10.5) than in the minor (4.5) population. Results obtained prove the benefits of a detailed characterization to find out if subsequent purification of functionalized AuNP-oligonucleotides is required to design more efficiently their final bioanalytical application.

An Affordable NIR Spectroscopic System for Fraud Detection in Olive Oil.

Adulterations of olive oil are performed by adding seed oils to this high-quality product, which are cheaper than olive oils. Food safety controls have been established by the European Union to avoid these episodes. Most of these methodologies require expensive equipment, time-consuming procedures, and expert personnel to execute. Near-infrared spectroscopy (NIRS) technology has many applications in the food processing industry. It analyzes food safety and quality parameters along the food chain. Using principal component analysis (PCA), the differences and similarities between olive oil and seed oils (sesame, sunflower, and flax oil) have been evaluated. To quantify the percentage of adulterated seed oil in olive oils, partial least squares (PLS) have been employed. A total of 96 samples of olive oil adulterated with seed oils were prepared. These samples were used to build a spectra library covering various mixtures containing seed oils and olive oil contents. Eighteen chemometric models were developed by combining the first and second derivatives with Standard Normal Variable (SNV) for scatter correction to classify and quantify seed oil adulteration and percentage. The results obtained for all seed oils show excellent coefficients of determination for calibration higher than 0.80. Because the instrumental aspects are not generally sufficiently addressed in the articles, we include a specific section on some key aspects of developing a high-performance and cost-effective NIR spectroscopy solution for fraud detection in olive oil. First, spectroscopy architectures are introduced, especially the Texas Instruments Digital Light Processing (DLP) technology for spectroscopy that has been used in this work. These results demonstrate that the portable prototype can be used as an effective tool to detect food fraud in liquid samples.

Inorganic nanoparticles coupled to nucleic acid enzymes as analytical signal amplification tools.

Nucleic acid enzymes (NAzymes) are a class of nucleic acid molecules with catalytic activity, which can be modulated by the presence of different species such as metal ions, genetic biomarkers, small molecules or proteins, among others. NAzymes offer several important advantages for development of novel bioanalytical strategies, resulting from their functionality as specific recognition elements and as amplified analytical signal generators, making them ideal candidates for developing highly specific bioanalytical strategies for the detection of a wide variety of targets. When coupled with the exceptional features of inorganic nanoparticles (NPs), the sensitivity of the assays can be significantly improved, allowing the detection of targets using many different detection techniques including visual readout, spectrophotometry, fluorimetry, electrochemiluminescence, voltammetry, and single-particle inductively coupled plasma-mass spectrometry. Here we provide an overview of the fundamentals of novel strategies developed to achieve analytical signal amplification based on the use of NAzymes coupled with inorganic NPs. Some representative examples of such strategies for the highly sensitive detection of different targets will be presented, including metal ions, proteins, DNA- or RNA-based biomarkers, and small molecules or microorganisms. Furthermore, future prospective challenges will be discussed.

Near-Infrared Sensors for Onsite and Noninvasive Quantification of Macronutrients in Breast Milk.

Breast milk is an optimal food that covers all the nutritional needs of the newborn. It is a dynamic fluid whose composition varies with lactation period. The neonatal units of hospitals have human milk banks, a service that analyzes, stores, and distributes donated human milk. This milk is used to feed premature infants (born before 32 weeks of gestation or weighing less than 1500 g) whose mothers, for some reason, cannot feed them with their own milk. Here, we aimed to develop near-infrared spectroscopy (NIRS) measures for the analysis of breast milk. For this purpose, we used a portable NIRS instrument scanning in the range of 1396-2396 nm to collect the spectra of milk samples. Then, different chemometrics were calculated to develop 18 calibration models with and without using derivatives and the standard normal variate. Once the calibration models were developed, the best treatments were selected according to the correlation coefficients (r2) and prediction errors (SECVs). The best results for the assayed macronutrients were obtained when no pre-treatment was applied to the NIR spectra of fat (r2 = 0.841, SECV = 0.51), raw protein (r2 = 0.512, SECV = 0.21), and carbohydrates (r2 = 0.741, SECV = 1.35). SNV plus the first derivative was applied to obtain satisfactory results for energy (r2 = 0.830, SECV = 9.60) quantification. The interpretation of the obtained results showed the richness of the NIRS spectra; moreover, the presence of specific bands for fat provided excellent statistics in quantitative models. These results demonstrated the ability of portable NIRS sensors in a methodology developed for the quality control of macronutrients in breast milk.

Signal amplification strategies for clinical biomarker quantification using elemental mass spectrometry.

The current trends in modern medicine towards early diagnosis, or even prognosis, of different diseases have brought about the need for the corresponding biomarker detection at ever lower levels in really complex matrices. To do so, it is necessary to use proper extremely sensitive detection techniques such as elemental mass spectrometry. However, target labelling with metals for subsequent sensitive ICP-MS detection falls short nowadays even if resorting to inorganic nanoparticles containing a high number of detectable elements. Thus, new amplification strategies are being proposed to face this analytical challenge that will be critically discussed in this paper. Fundamentals of different novel strategies developed to achieve signal amplification and sensitive elemental mass spectrometry detection are here discussed. Some representative examples of relevant clinical applications are highlighted, along with future prospects and challenges.

Formation Mechanism and Toxicological Significance of Biogenic Mercury Selenide Nanoparticles in Human Hepatoma HepG2 Cells.

It is widely recognized that the toxicity of mercury (Hg) is attenuated by the simultaneous administration of selenium (Se) compounds in various organisms. In this study, we revealed the mechanisms underlying the antagonistic effect of sodium selenite (Na2SeO3) on inorganic Hg (Hg2+) toxicity in human hepatoma HepG2 cells. Observations by transmission electron microscopy indicated that HgSe (tiemannite) granules of up to 100 nm in diameter were accumulated in lysosomal-like structures in the cells. The HgSe granules were composed of a number of HgSe nanoparticles, each measuring less than 10 nm in diameter. No accumulation of HgSe nanoparticles in lysosomes was observed in the cells exposed to chemically synthesized HgSe nanoparticles. This suggests that intracellular HgSe nanoparticles were biologically generated from Na2SeO3 and Hg2+ ions transported into the cells and were not derived from HgSe nanoparticles formed in the extracellular fluid. Approximately 85% of biogenic HgSe remained in the cells at 72 h post culturing, indicating that biogenic HgSe was hardly excreted from the cells. Moreover, the cytotoxicity of Hg2+ was ameliorated by the simultaneous exposure to Na2SeO3 even before the formation of insoluble HgSe nanoparticles. Our data confirmed for the first time that HepG2 cells can circumvent the toxicity of Hg2+ through the direct interaction of Hg2+ with a reduced form of Se (selenide) to form HgSe nanoparticles via a Hg-Se soluble complex in the cells. Biogenic HgSe nanoparticles are considered the ultimate metabolite in the Hg detoxification process.

Distributions of mercury and selenium in rats ingesting mercury selenide nanoparticles.

Mercury (Hg) is one of the most toxic environmental pollutants, and is biocondensed via the food chain. Selenium (Se) is an essential element that possesses an antagonistic property towards Hg in vivo. The antagonistic property is explained by the assumption that Hg and Se directly interact to form HgSe nanoparticles (HgSe NPs) in organs. It is presumed that the toxic effects of HgSe NPs are lower than that of ionic Hg; however, no precise evaluation has been conducted so far. In the present study, we evaluated the distribution of HgSe NPs ingested in Se-deficient rats. The recovery of serum selenoproteins from a deficient level was not observed in rats orally administered HgSe NPs. In addition, the excretion of Hg and Se via urine was not observed. Interestingly, the biosynthesis of selenoproteins and urinary selenometabolites would have required the production of selenide through the degradation of HgSe NPs. Therefore, it seems that selenide and Hg are not released from HgSe NPs in vivo. The administration of HgSe NPs did not increase Hg and Se concentrations in organs, and almost all HgSe NPs were recovered in feces, indicating no or low bioaccessibility of HgSe NPs even in Se-deficient rats. These results suggest that HgSe NPs are biologically inert and do not become a secondary environmental pollutant of Hg.

Electrochemical quantification of Ag2S quantum dots: evaluation of different surface coating ligands for bacteria determination.

In this work, novel silver sulphide quantum dots (Ag2S QD) are electrochemically quantified for the first time. The method is based on the electrochemical reduction of Ag+ to Ag0 at -0.3 V on screen-printed carbon electrodes (SPCEs), followed by anodic stripping voltammetric oxidation that gives a peak of currents at +0.06 V which represents the analytical signal. The optimized methodology allows the quantification of water-stabilized Ag2S QD in the range of approximately 2 × 109-2 × 1012 QD·mL-1 with a good reproducibility (RSD: 5%). Moreover, as proof-of-concept of relevant biosensing application, Ag2S QD are evaluated as tags for Escherichia coli (E. coli) bacteria determination. Bacteria tagged with QD are separated by centrifugation from the sample solution and placed on the SPCE surface for quantitative analysis. The effect of two different Ag2S QD surface coating/stabilizing agents on both the voltammetric response and the bacteria sensing is also evaluated. 3-mercaptopropionic acid (3-MPA) is studied as model of short length coating ligand with no affinity for the bacteria, while boronic acid (BA) is evaluated as longer length ligand with chemical affinity for the polysaccharides present in the peptidoglycan layer on the bacteria cells surface. The biosensing system allows to detect bacteria in the range 10-1-103 bacteria·mL-1 with a limit of detection as low as 1 bacteria·mL-1. This methodology is a promising proof-of-concept alternative to traditional laboratory-based tests, with good sensitivity and short time and low cost of analysis. Graphical abstractNovel silver sulphide quantum dots (Ag2S QD) are electrochemically quantified for the first time. Moreover, Ag2S QD are evaluated as tags for Escherichia coli bacteria determination. The effect of two different QD surface coating ligands is also evaluated.

Capabilities of asymmetrical flow field - Flow fractionation on-line coupled to different detectors for characterization of water-stabilized quantum dots bioconjugated to biomolecules.

The asymmetric flow field-flow fractionation (AF4) coupled on-line with elemental (inductively coupled plasma-mass spectrometry, ICP-MS) and molecular (fluorescence and UV) detection has been investigated as a powerful tool for the characterization of bioinorganic nano-conjugates. In this study, we described methods for the characterization of biotin-antibody complexes bioconjugated with streptavidin quantum dots (QDs-SA-b-Ab). Operating parameters of AF4 separation technique were optimized and two procedures are proposed using a channel thickness of 350 µm and 500 µm. The use of a 500 µm spacer allowed to achieve an efficient AF4 separation of the QDs-SA-b-Ab complexes from the excess of individual species used in the bioconjugation that was required for a proper characterization of the bioconjugates. Optimization of the AF4 allowed a separation resolution good enough to isolate the QDs-SA-b-Ab bioconjugates from the free excess of b-Ab and QD-SA. The efficiency of the bioconjugation process could be then calculated, obtaining a value of 86% for a 1 QDs-SA: 5 b-Ab bioconjugation ratio. In addition, sample recovery around 90% was achieved.

Design of Engineered Cyclodextrin Derivatives for Spontaneous Coating of Highly Porous Metal-Organic Framework Nanoparticles in Aqueous Media.

Nanosized metal-organic frameworks (nanoMOFs) MIL-100(Fe) are highly porous and biodegradable materials that have emerged as promising drug nanocarriers. A challenging issue concerns their surface functionalization in order to evade the immune system and to provide molecular recognition ability, so that they can be used for specific targeting. A convenient method for their coating with tetraethylene glycol, polyethylene glycol, and mannose residues is reported herein. The method consists of the organic solvent-free self-assembly on the nanoMOFs of building blocks based on ß-cyclodextrin facially derivatized with the referred functional moieties, and multiple phosphate groups to anchor to the nanoparticles' surface. The coating of nanoMOFs with cyclodextrin phosphate without further functional groups led to a significant decrease of macrophage uptake, slightly improved by polyethylene glycol or mannose-containing cyclodextrin phosphate coating. More notably, nanoMOFs modified with tetraethylene glycol-containing cyclodextrin phosphate displayed the most efficient "stealth" effect. Mannose-coated nanoMOFs displayed a remarkably enhanced binding affinity towards a specific mannose receptor, such as Concanavalin A, due to the multivalent display of the monosaccharide, as well as reduced macrophage internalization. Coating with tetraethylente glycol of nanoMOFs after loading with doxorubicin is also described. Therefore, phosphorylated cyclodextrins offer a versatile platform to coat nanoMOFs in an organic solvent-free, one step manner, providing them with new biorecognition and/or "stealth" properties.

Simple and rapid electrochemical quantification of water-stabilized HgSe nanoparticles of great concern in environmental studies.

The sensitive monitoring of mercury (II) selenide nanoparticles (HgSe NPs) is of great potential relevance in environmental studies, since such NPs are believed to be the ultimate metabolic product of the lifesaving mechanism pathway of Hg detoxification in biological systems. In this context, we take advantage of using gold-nanostructured screen-printed carbon electrodes (SPCE-Au) for the rapid, simple and sensitive electrochemical quantification of engineered water-stable HgSe NPs, as an advantageous alternative to conventional elemental analysis techniques. HgSe NPs are first treated in an optimized oxidative/acidic medium for Hg2+ release, followed by sensitive electrochemical detection by anodic stripping voltammetry (ASV). To the best of our knowledge, this is the first time that water-stable HgSe NPs are quantified using electrochemical techniques. The low limit of detection achieved (3.86 × 107 HgSe NPs/mL) together with the excellent repeatability (RSD: 3%), reproducibility (RSD: 5%) and trueness (relative error: 10%), the good performance in real sea water samples (recoveries of the analytical signal higher than 90%) and the simplicity/low cost of analysis make our method an ideal candidate for HgSe NPs monitoring in future environmental studies.

Near-infrared fluorescent nanoprobes for highly sensitive cyanide quantification in natural waters.

Near infrared (NIR) emitting Ag2S quantum dots have been synthesized, characterized and evaluated for chemical sensing applications. After their optical characterization, it was observed that the Ag2S quantum dots present both, excitation and emission in the NIR region, and an excellent quantum yield of 33.2%. These features are of great value for many biological applications, since autofluorescence of biological tissues or cells is minimized, and also for environmental applications, where other fluorescent concomitant species with excitation and emission in the ultraviolet-visible region might be present. Different purification procedures were evaluated in order to obtain a stable and homogeneous population of nanoparticles, which is necessary to perform quantitative analysis (e.g.: mass spectrometry-based applications), as well as to obtain a narrow NIR emission spectrum for optical applications. Comprehensive characterization using X-ray diffraction, transmission electron microscopy, and asymmetric flow field flow fractionation coupled to inductively coupled plasma-mass spectrometry has been performed to obtain parameters not easily achieved and of great interest in different research areas, such as the nanoparticle concentration NIR-emitting nanoparticles, and the surface ligand density, which directly affects to the interactions of the nanoparticles with their close environment, including unspecific adsorptions, cellular uptake, macrophage interaction, etc. Finally, the capability for sensing analytes of environmental interest based on direct-interactions of a reactive compound with the surface of the nanoparticle has been also evaluated. Quenching of the NIR emission upon interaction of the Ag2S quantum dots with cyanide ions was observed. Hence, a rapid, selective and highly sensitive methodology was developed for the detection of cyanide in natural waters.

Controlling Ligand Surface Density on Streptavidin-Magnetic Particles by a Simple, Rapid, and Reliable Chemiluminescent Test.

The use of functionalized magnetic particles is increasing because they simplify the analytical process and yield promising results in a wide range of applications. Particularly, streptavidin-coated magnetic beads offer the possibility of rapid and very efficient grafting of biomolecules. Unfortunately, current methods to monitor and compute this grafting process are cumbersome and scarce. We describe herein a simple, rapid, and reliable chemiluminescent assay we have developed to check the grafting rate of functionalized magnetic beads. The power of the assay also relies on its ability to predict the amount of ligands required to obtain a precise grafting rate. In addition, results were correlated with a more general parameter in material functionalization characterization like surface ligand density. Finally, the assay was validated for a wide variety of biotinylated biomolecule sizes, ranging from small molecules (around 200 Da) to antibodies (around 150 kDa). This approach will allow a precise quantification and prediction of the functionalization of magnetic particles that is of enormous importance for quality control in many applications.