Protraction Headgear Compliance and Orthognathic Surgery in Patients With Cleft Lip and Palate.

Assess cephalometric parameters and the need for orthognathic surgery (OS) and its relationship with compliance in protraction headgear (PHG).Retrospective case series.Hospital cleft-craniofacial center.23 patients with nonsyndromic cleft lip and palate and history of lip and palate repair.Patients received PHG and orthodontic treatment. Compliant patients were compared to patients that were not. Protraction was applied with 170-gram elastics and patients were instructed to wear for at least 12 hours daily.Cephalometric measurements at initial (T1), post-PHG (T2), and pre-surgical or post-orthodontic treatment (T3) of at least age 15 for females and 17 for males and the presence of OS were compared.83% (19) of patients reported compliance with therapy. Of those compliant, 68% (13) had OS and 32% (6) did not (P = .99). Inter-group comparisons at T1 between compliant and noncompliant showed no significant differences and the non-OS patients started with larger nasolabial angles (P < .05). At T2, there were no significant cephalometric differences between groups. At T3, compliant patients showed significantly more upper incisor proclination than noncompliant patients. Between OS and non-OS, OS patients had significantly decreased ANB, Wits, convexity, overjet, and FMA and larger nasolabial angles (P < .05).Patients compliant with PHG showed no difference in the need for OS. However, after orthodontic treatment, compliant patients showed more upper incisor proclination and OS patients with decreased ANB, Wits, convexity, overjet, FMA, and larger nasolabial angles.

The Association Between Age at Palatoplasty and Speech and Language Outcomes in Children With Cleft Palate: An Observational Chart Review Study.

OBJECTIVE: To determine whether timing of palatoplasty (early, standard, or late) is associated with speech and language outcomes in children with cleft palate. DESIGN: Retrospective case series. SETTING: Tertiary care children's hospital. PARTICIPANTS: Records from 733 children born between 2005 and 2015 and treated at the Cleft Craniofacial Clinic of a tertiary children's hospital were retrospectively reviewed. Exclusion criteria were cleft repair at an outside hospital, intact secondary palate, absence of postpalatoplasty speech evaluation, syndromes, staged palatoplasty, and introduction to clinic after 12 months of age. Data from 232 children with cleft palate ± cleft lip were analyzed. INTERVENTIONS: Palatoplasty. MAIN OUTCOME MEASURES: Speech/language delays and disorders at 20 months and 5 years of age based on formal hospital or community-based testing or screening evaluation in the Cleft Craniofacial Clinic; additional speech surgery. RESULTS: Median age at palatoplasty was 12.6 months (range: 8.8-21.9 months). Age at palatoplasty was classified as early (<11 months, n = 28), standard (11-13 months, n = 158), or late (>13 months, n = 46). Late palatoplasty was associated with increased odds of speech/language delays and speech therapy at 20 months, and language delays at 5 years, compared with standard or early palatoplasty (P < .05 for all comparisons). However, speech sound production disorders, velopharyngeal incompetence, tube replacement, and hearing loss were not significantly associated with age at palatoplasty. CONCLUSIONS: Late palatoplasty may be associated with short- and long-term delays in speech/language development. Future studies with standardized surgical technique/timing and outcome measures are required to more definitively describe the impact of age at palatoplasty on speech/language development.

Chronic Recurrent Multifocal Osteomyelitis of the Mandible: A Diagnostic Challenge.

Chronic recurrent multifocal osteomyelitis is a rare autoinflammatory bone disorder of children and adolescents characterized by monofocal or multifocal inflammatory bone lesions that are culture-negative on biopsy, associated with periods of exacerbation and resolution that can last over several months to years. Although it is predominantly a disease of long bones and the spine, craniofacial involvement is not uncommon, affecting the mandible in up to one-fifth of cases. Similarities with other causes of osteitis in clinical presentation and imaging, and the lack of specific symptoms or laboratory tests, make chronic recurrent multifocal osteomyelitis mainly a diagnosis of exclusion. An accurate diagnosis is required for appropriate treatment to induce remission. This article highlights the challenges faced by plastic and oral surgeons in diagnosing mandibular chronic recurrent multifocal osteomyelitis, and describes two pediatric patients affected with the disease. Both cases were initially confused with other entities, leading to unnecessary initial treatments and a delayed diagnosis. A review aimed at surgeons summarizes the major aspects of this condition so that it is considered as a differential diagnosis in young patients presenting with a facial bony mass. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

Rescue of Premature Coronal Suture Fusion with TGF-ß2 Neutralizing Antibody in Rabbits with Delayed-Onset Synostosis.

OBJECTIVES: An overexpression of Tgf-ß2 leads to calvarial hyperostosis and suture fusion in individuals with craniosynostosis. Inhibition of Tgf-ß2 may help rescue fusing sutures and restore normal growth. The present study was designed to test this hypothesis. DESIGN: Twenty-eight New Zealand White rabbits with delayed-onset coronal synostosis had radiopaque markers placed on either side of the coronal sutures at 10 days of age. The rabbits were randomly assigned to: (1) sham control rabbits (n = 10), (2) rabbits with control IgG (100 µg/suture) delivered in a collagen vehicle (n = 9), and (3) rabbits with Tgf-ß2 neutralizing antibody (100 µg/suture) delivered in a collagen vehicle (n = 9). Longitudinal growth data were collected at 10, 25, 42, and 84 days of age. Sutures were harvested at 84 days of age for histomorphometry. RESULTS: Radiographic analysis showed significantly greater ( P < .05) coronal suture marker separation, craniofacial length, cranial vault length, height, shape indices, cranial base length, and more lordotic cranial base angles in rabbits treated with anti-Tgf-ß2 antibody than in controls at 42 and 84 days of age. Histologically, rabbits treated with anti-Tgf-ß2 antibody at 84 days of age had patent and significantly ( P < .05) wider coronal sutures and greater sutural area compared to controls. CONCLUSIONS: These data support our hypothesis that antagonism of Tgf-ß2 may rescue fusing coronal sutures and facilitate craniofacial growth in this rabbit model. These findings also suggest that cytokine therapy may have clinical significance in infants with progressive postgestational craniosynostosis.

Soft Tissue Regeneration Incorporating 3-Dimensional Biomimetic Scaffolds.

Soft tissue replacement and repair is crucial to the ever-developing field of reconstructive surgery as trauma, pathology, and congenital deficits cannot be adequately restored if soft tissue regeneration is deficient. Predominant approaches were sometimes limited to harvesting autografts, but through regenerative medicine and tissue engineering, the hope of fabricating custom constructs is now a feasible and fast-approaching reality. The breadth of this field includes tissues ranging from skin, mucosa, muscle, and fat and hopes to not only provide construct to replace a tissue but also to replace its function.

Circularly Polarized Luminescence from Helically Chiral N,N,O,O-Boron-Chelated Dipyrromethenes.

Helically chiral N,N,O,O-boron chelated dipyrromethenes showed solution-phase circularly polarized luminescence (CPL) in the red region of the visible spectrum (λem (max) from 621 to 663 nm). The parent dipyrromethene is desymmetrised through O chelation of boron by the 3,5-ortho-phenolic substituents, inducing a helical chirality in the fluorophore. The combination of high luminescence dissymmetry factors (|glum | up to 4.7 ×10(-3) ) and fluorescence quantum yields (ΦF up to 0.73) gave exceptionally efficient circularly polarized red emission from these simple small organic fluorophores, enabling future application in CPL-based bioimaging.

Biophysical characterization of laforin-carbohydrate interaction.

Laforin is a human dual-specificity phosphatase (DSP) involved in glycogen metabolism regulation containing a carbohydrate-binding module (CBM). Mutations in the gene coding for laforin are responsible for the development of Lafora disease, a progressive fatal myoclonus epilepsy with early onset, characterized by the intracellular deposition of abnormally branched, hyperphosphorylated insoluble glycogen-like polymers, called Lafora bodies. Despite the known importance of the CBM domain of laforin in the regulation of glycogen metabolism, the molecular mechanism of laforin-glycogen interaction is still poorly understood. Recently, the structure of laforin with bound maltohexaose was determined and despite the importance of such breakthrough, some molecular interaction details remained missing. We herein report a thorough biophysical characterization of laforin-carbohydrate interaction using soluble glycans. We demonstrated an increased preference of laforin for the interaction with glycans with higher order of polymerization and confirmed the importance of tryptophan residues for glycan interaction. Moreover, and in line with what has been described for other CBMs and lectins, our results confirmed that laforin-glycan interactions occur with a favourable enthalpic contribution counter-balanced by an unfavourable entropic contribution. The analysis of laforin-glycan interaction through the glycan side by saturation transfer difference (STD)-NMR has shown that the CBM-binding site can accommodate between 5 and 6 sugar units, which is in line with the recently obtained crystal structure of laforin. Overall, the work in the present study complements the structural characterization of laforin and sheds light on the molecular mechanism of laforin-glycan interaction, which is a pivotal requisite to understand the physiological and pathological roles of laforin.

Is Computed Tomography an Adequate Imaging Modality for the Evaluation of Juvenile Ossifying Fibroma? A Comparison of 2 Imaging Modalities (Computed Tomography and Magnetic Resonance Imaging).

PURPOSE: Given the problems of overuse of medical technology and the current burden of health care cost in the United States, it is important to establish clear imaging guidelines to diagnose conditions such as juvenile ossifying fibroma (JOF). This study compared the efficacy of computed tomography (CT) and magnetic resonance imaging (MRI) in the evaluation of JOF and thus could aid establishing such guidelines. MATERIALS AND METHODS: Radiologic criteria were established by 2 radiologists to compare the efficacy of CT and MRI in the evaluation of JOF. The following parameters were compared: presence of a well-defined corticated border, presence of a well-delineated internal calcified component, fluid-to-fluid levels, and anatomic extent of the lesion. Six patients diagnosed with JOF of the craniofacial bones from 2002 to 2013 had preoperative CT and MRI studies available for review. RESULTS: After review of CT and MRI images, fluid-to-fluid levels and anatomic extent of the lesions were comparable on CT and MRI. However, the corticated borders and the internal calcified component were better defined on CT images, which also enabled for distinction between the 2 subtypes of JOF. No MRI characteristics were identified that allowed for this distinction. CONCLUSION: Based on these findings, CT is an adequate and preferable imaging modality in the evaluation of JOF.

In vivo study of magnesium plate and screw degradation and bone fracture healing.

Each year, millions of Americans suffer bone fractures, often requiring internal fixation. Current devices, like plates and screws, are made with permanent metals or resorbable polymers. Permanent metals provide strength and biocompatibility, but cause long-term complications and may require removal. Resorbable polymers reduce long-term complications, but are unsuitable for many load-bearing applications. To mitigate complications, degradable magnesium (Mg) alloys are being developed for craniofacial and orthopedic applications. Their combination of strength and degradation make them ideal for bone fixation. Previously, we conducted a pilot study comparing Mg and titanium devices with a rabbit ulna fracture model. We observed Mg device degradation, with uninhibited healing. Interestingly, we observed bone formation around degrading Mg, but not titanium, devices. These results highlighted the potential for these fixation devices. To better assess their efficacy, we conducted a more thorough study assessing 99.9% Mg devices in a similar rabbit ulna fracture model. Device degradation, fracture healing, and bone formation were evaluated using microcomputed tomography, histology and biomechanical tests. We observed device degradation throughout, and calculated a corrosion rate of 0.40±0.04mm/year after 8 weeks. In addition, we observed fracture healing by 8 weeks, and maturation after 16 weeks. In accordance with our pilot study, we observed bone formation surrounding Mg devices, with complete overgrowth by 16 weeks. Bend tests revealed no difference in flexural load of healed ulnae with Mg devices compared to intact ulnae. These data suggest that Mg devices provide stabilization to facilitate healing, while degrading and stimulating new bone formation.

Fracture healing using degradable magnesium fixation plates and screws.

PURPOSE: Internal bone fixation devices made with permanent metals are associated with numerous long-term complications and may require removal. We hypothesized that fixation devices made with degradable magnesium alloys could provide an ideal combination of strength and degradation, facilitating fracture fixation and healing while eliminating the need for implant removal surgery. MATERIALS AND METHODS: Fixation plates and screws were machined from 99.9% pure magnesium and compared with titanium devices in a rabbit ulnar fracture model. Magnesium device degradation and the effect on fracture healing and bone formation were assessed after 4 weeks. Fracture healing with magnesium device fixation was compared with that of titanium devices using qualitative histologic analysis and quantitative histomorphometry. RESULTS: Micro-computed tomography showed device degradation after 4 weeks in vivo. In addition, 2-dimensional micro-computed tomography slices and histologic staining showed that magnesium degradation did not inhibit fracture healing or bone formation. Histomorphology showed no difference in bone-bridging fractures fixed with magnesium and titanium devices. Interestingly, abundant new bone was formed around magnesium devices, suggesting a connection between magnesium degradation and bone formation. CONCLUSION: Our results show potential for magnesium fixation devices in a loaded fracture environment. Furthermore, these results suggest that magnesium fixation devices may enhance fracture healing by encouraging localized new bone formation.

Management of cleft lip and palate and cleft orthognathic considerations.

Cleft lip and palate are among the most common congenital anomalies in humans. The treatment of this group of patients is best conducted by a multidisciplinary team approach. This article discusses the accepted treatment algorithm and timeline, as well as special considerations for this patient group when performing orthognathic surgery. Patients with cleft lip and palate often present with significantly more technical and challenging procedures, so clinicians should familiarize themselves with these special considerations before attempting to care for these individuals.

Regeneration of periosteum by human bone marrow stromal cell sheets.

PURPOSE: The presence of a functional periosteum accelerates healing in bone defects by providing a source of progenitor cells that aid in repair. We hypothesized that bone marrow stromal cell (BMSC) sheets could be used to engineer functional periosteal tissues. MATERIALS AND METHODS: BMSCs were cultured to hyperconfluence and produced sufficient extracellular matrix to form robust tissue sheets. The sheets were wrapped around calcium phosphate pellets and implanted subcutaneously in mice for 8 weeks. Histologic comparisons were made between calcium phosphate samples with and without BMSC sheet wraps. Bone and periosteum formation were analyzed through tissue morphology and tissue-specific protein expression. RESULTS: Calcium phosphate pellets wrapped in BMSC sheets regenerated a bone-like tissue, but pellets lacking the cell sheet wrap did not. The bone-like tissue seen on the calcium phosphate scaffolds wrapped with the BMSC sheets was enclosed within a periosteum-like tissue characterized morphologically and through expression of periostin. CONCLUSIONS: These data indicate that cell sheet technology has potential for regenerating a functional periosteum-like tissue that could aid in future orthopedic therapy.

The utility of hybrid promotion and tenure tracks for dental school faculty.

The promotion and tenure process for faculty members varies, by design, for different disciplines, departments, and academic institutions. For many faculty members in U.S. dental schools, the process may thus appear nebulous and be difficult to navigate. In this article, we review the history, forces of change, and some of the mechanisms utilized for promotion and tenure of faculty in the health sciences, particularly for clinician-educators. Some institutions have successfully created hybrid tracks for clinician-educators in order to develop and recognize these faculty members' scholarly activity in addition to their clinical teaching. Hybrid tracks empower faculty members to successfully perform scholarly activities that realistically reflect institutional missions. The authors of this article conclude with a number of practical suggestions to enhance development and retention of faculty using the hybrid promotion and tenure mechanism. These include demonstrating the congruence of institutional mission, faculty activities, and promotion and tenure guidelines; developing scholarly activities for clinician-educators that can be measured in the promotion and tenure process; rewarding scholarly achievement for clinician-educators utilizing the promotion and tenure mechanism; and developing an evaluation system that accounts for changes in mission and faculty activities.

A method for direct fabrication of a lingual splint for management of pediatric mandibular fractures.

SUMMARY: Pediatric mandibular fractures have successfully been managed in various ways. The use of a lingual splint is one such option. The typical indirect method for acrylic lingual splint fabrication involves obtaining dental impressions. Dental models are produced from those impressions so that model surgery may be performed. The splint is then made on those models using resin powder and liquid monomer in a wet laboratory and transferred to the patient. Obvious limitations to this technique exist for both patient and operator. We present a technique for direct, intraoperative, fabrication of a splint using commercially available light-cured material that avoids some of the shortcomings of the indirect method. Recommendations are made based on available material safety information.

Growth and development considerations for craniomaxillofacial surgery.

The purpose of craniomaxillofacial surgery is to improve function, occlusion, craniofacial balance, and aesthetics. Accurate diagnosis, assessment, and careful treatment planning are essential in achieving a successful outcome, and an understanding of the pattern of facial growth is integral in this process. Patients with craniofacial congenital dysmorphologies, posttraumatic asymmetries, or disturbances of facial balance from radiation may have functional and/or aesthetic issues that require treatment. Understanding the complexities of growth in the skull and face is a key component to appropriate treatment planning for these disorders. This article reviews growth and development in the craniofacial skeleton.