Capsules, toxins and AtxA as virulence factors of emerging Bacillus cereus biovar anthracis.

Emerging B. cereus strains that cause anthrax-like disease have been isolated in Cameroon (CA strain) and Côte d'Ivoire (CI strain). These strains are unusual, because their genomic characterisation shows that they belong to the B. cereus species, although they harbour two plasmids, pBCXO1 and pBCXO2, that are highly similar to the pXO1 and pXO2 plasmids of B. anthracis that encode the toxins and the polyglutamate capsule respectively. The virulence factors implicated in the pathogenicity of these B. cereus bv anthracis strains remain to be characterised. We tested their virulence by cutaneous and intranasal delivery in mice and guinea pigs; they were as virulent as wild-type B. anthracis. Unlike as described for pXO2-cured B. anthracis, the CA strain cured of the pBCXO2 plasmid was still highly virulent, showing the existence of other virulence factors. Indeed, these strains concomitantly expressed a hyaluronic acid (HA) capsule and the B. anthracis polyglutamate (PDGA) capsule. The HA capsule was encoded by the hasACB operon on pBCXO1, and its expression was regulated by the global transcription regulator AtxA, which controls anthrax toxins and PDGA capsule in B. anthracis. Thus, the HA and PDGA capsules and toxins were co-regulated by AtxA. We explored the respective effect of the virulence factors on colonisation and dissemination of CA within its host by constructing bioluminescent mutants. Expression of the HA capsule by itself led to local multiplication and, during intranasal infection, to local dissemination to the adjacent brain tissue. Co-expression of either toxins or PDGA capsule with HA capsule enabled systemic dissemination, thus providing a clear evolutionary advantage. Protection against infection by B. cereus bv anthracis required the same vaccination formulation as that used against B. anthracis. Thus, these strains, at the frontier between B. anthracis and B. cereus, provide insight into how the monomorphic B. anthracis may have emerged.

The spore differentiation pathway in the enteric pathogen Clostridium difficile.

Endosporulation is an ancient bacterial developmental program that culminates with the differentiation of a highly resistant endospore. In the model organism Bacillus subtilis, gene expression in the forespore and in the mother cell, the two cells that participate in endospore development, is governed by cell type-specific RNA polymerase sigma subunits. σ(F) in the forespore, and σ(E) in the mother cell control early stages of development and are replaced, at later stages, by σ(G) and σ(K), respectively. Starting with σ(F), the activation of the sigma factors is sequential, requires the preceding factor, and involves cell-cell signaling pathways that operate at key morphological stages. Here, we have studied the function and regulation of the sporulation sigma factors in the intestinal pathogen Clostridium difficile, an obligate anaerobe in which the endospores are central to the infectious cycle. The morphological characterization of mutants for the sporulation sigma factors, in parallel with use of a fluorescence reporter for single cell analysis of gene expression, unraveled important deviations from the B. subtilis paradigm. While the main periods of activity of the sigma factors are conserved, we show that the activity of σ(E) is partially independent of σ(F), that σ(G) activity is not dependent on σ(E), and that the activity of σ(K) does not require σ(G). We also show that σ(K) is not strictly required for heat resistant spore formation. In all, our results indicate reduced temporal segregation between the activities of the early and late sigma factors, and reduced requirement for the σ(F)-to-σ(E), σ(E)-to-σ(G), and σ(G)-to-σ(K) cell-cell signaling pathways. Nevertheless, our results support the view that the top level of the endosporulation network is conserved in evolution, with the sigma factors acting as the key regulators of the pathway, established some 2.5 billion years ago upon its emergence at the base of the Firmicutes Phylum.

Distinct functions of polysaccharide deacetylases in cell shape, neutral polysaccharide synthesis and virulence of Bacillus anthracis.

Peptidoglycan deacetylases (PGNG-dacs) belong to the Carbohydrate Esterase Family 4 (CE4) and have been described as required for bacterial evasion to lysozyme and innate immune responses. Interestingly, there is an unusual occurrence of 10 putative polysaccharide deacetylases, including five PGNG-dacs, in the Bacillus sp. genomes, especially B. cereus and B. anthracis. To elucidate the physiological role of these multiple deacetylases, we employed genetic analysis and protein localization studies of five putative PGNG-dacs from B. anthracis as well as biochemical analysis of their corresponding homologues from B. cereus. Our data confirm that three enzymes are PGNG-dacs. While BA1977, associated with lateral peptidoglycan synthesis, is a bona fide peptidoglycan deacetylase involved in resistance to host lysozyme and required for full virulence, BA1961 and BA3679 participate in the biogenesis of the peptidoglycan during both elongation and cell division. Furthermore, two enzymes are important for neutral polysaccharide attachment to PG and consequently anchoring of S-layer proteins (BA5436) and for polysaccharide modification (BA2944). Our results provide novel and fundamental insights into the function of polysaccharide deacetylases in a major bioterrorism agent.

CEMOVIS on a pathogen: analysis of Bacillus anthracis spores.

BACKGROUND INFORMATION: Under conditions of starvation, bacteria of Bacillus ssp. are able to form a highly structured cell type, the dormant spore. When the environment presents more favourable conditions, the spore starts to germinate, which will lead to the release of the vegetative form in the life cycle, the bacillus. For Bacillus anthracis, the aetiological agent of anthrax, germination is normally linked to host uptake and represents an important step in the onset of anthrax disease. Morphological studies analysing the organization of the spore and the changes during germination at the electron microscopy level were only previously performed with techniques relying on fixation with aldehydes and osmium, and subsequent dehydration, which can produce artefacts. RESULTS AND CONCLUSIONS: In the present study, we describe the morphology of dormant spores using CEMOVIS (Cryo-Electron Microscopy of Vitreous Sections). Biosafety measures do not permit freezing of native spores of B. anthracis without chemical fixation. To study the influence of aldehyde fixation on the ultrastructure of the spore, we chose to analyse spores of the closely related non-pathogen Bacillus cereus T. For none of the investigated structures could we find a difference in morphology induced by aldehyde fixation compared with the native preparations for CEMOVIS. This result legitimizes work with aldehyde-fixed spores from B. anthracis. Using CEMOVIS, we describe two new structures present in the spore: a rectangular structure, which connects the BclA filaments with the basal layer of the exosporium, and a repetitive structure, which can be found in the terminal layer of the coat. We studied the morphological changes of the spore during germination. After outgrowth of the bacillus, coat and exosporium stay associated, and the layered organization of the coat, as well as the repetitive structure within it, remain unchanged.

Characterization of Acp, a peptidoglycan hydrolase of Clostridium perfringens with N-acetylglucosaminidase activity that is implicated in cell separation and stress-induced autolysis.

This work reports the characterization of the first known peptidoglycan hydrolase (Acp) produced mainly during vegetative growth of Clostridium perfringens. Acp has a modular structure with three domains: a signal peptide domain, an N-terminal domain with repeated sequences, and a C-terminal catalytic domain. The purified recombinant catalytic domain of Acp displayed lytic activity on the cell walls of several Gram-positive bacterial species. Its hydrolytic specificity was established by analyzing the Bacillus subtilis peptidoglycan digestion products by coupling reverse phase-high-pressure liquid chromatography (RP-HPLC) and matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) analysis, which displayed an N-acetylglucosaminidase activity. The study of acp expression showed a constant expression during growth, which suggested an important role of Acp in growth of C. perfringens. Furthermore, cell fractionation and indirect immunofluorescence staining using anti-Acp antibodies revealed that Acp is located at the septal peptidoglycan of vegetative cells during exponential growth phase, indicating a role in cell separation or division of C. perfringens. A knockout acp mutant strain was obtained by using the insertion of mobile group II intron strategy (ClosTron). The microscopic examination indicated a lack of vegetative cell separation in the acp mutant strain, as well as the wild-type strain incubated with anti-Acp antibodies, demonstrating the critical role of Acp in cell separation. The comparative responses of wild-type and acp mutant strains to stresses induced by Triton X-100, bile salts, and vancomycin revealed an implication of Acp in autolysis induced by these stresses. Overall, Acp appears as a major cell wall N-acetylglucosaminidase implicated in both vegetative growth and stress-induced autolysis.

Structure of the exosporium and sublayers of spores of the Bacillus cereus family revealed by electron crystallography.

We report on the first step in mapping out the spatial location of structural proteins within the exosporium, namely a description of its three-dimensional architecture. Using electron microscopy and image analysis, we have characterized crystalline fragments from the exosporium of Bacillus cereus, B. thuringiensis and B. anthracis strains and identified up to three distinct crystal types. Type I and type II crystals were examined in three dimensions and shown to form arrays of interlinked crown-like structures each enclosing a cavity approximately 26-34 A deep with threefold symmetry. The arrays appear to be permeated by tunnels allowing access from one surface to the other, possibly indicating that the exosporium forms a semi-permeable barrier. The pore size of approximately 23-34 A would allow passage of the endospore germinants, alanine or inosine but not degradative enzymes or antibodies. Thus the structures appear compatible with a protective role for the exosporium. Furthermore the outermost crystalline layer must act as a scaffold for binding the BclA protein that contributes to the 'hairy nap' layer. The array of crowns may also act as a matrix for the binding or adsorption of other proteins that have been identified in the exosporium such as GroEL, immune inhibitor A and arginase.

Identification of the Bacillus anthracis (gamma) phage receptor.

Bacillus anthracis, a gram-positive, spore-forming bacterium, is the etiological agent of anthrax. It belongs to the Bacillus cereus group, which also contains Bacillus cereus and Bacillus thuringiensis. Most B. anthracis strains are sensitive to phage gamma, but most B. cereus and B. thuringiensis strains are resistant to the lytic action of phage gamma. Here, we report the identification of a protein involved in the bacterial receptor for the gamma phage, which we term GamR (Gamma phage receptor). It is an LPXTG protein (BA3367, BAS3121) and is anchored by the sortase A. A B. anthracis sortase A mutant is not as sensitive as the parental strain nor as the sortase B and sortase C mutants, whereas the GamR mutant is resistant to the lytic action of the phage. Electron microscopy reveals the binding of the phage to the surface of the parental strain and its absence from the GamR mutant. Spontaneous B. anthracis mutants resistant to the phage harbor mutations in the gene encoding the GamR protein. A B. cereus strain that is sensitive to the phage possesses a protein similar (89% identity) to GamR. B. thuringiensis 97-27, a strain which, by sequence analysis, is predicted to harbor a GamR-like protein, is resistant to the phage but nevertheless displays phage binding.

Contribution of ExsFA and ExsFB proteins to the localization of BclA on the spore surface and to the stability of the bacillus anthracis exosporium.

Spores of Bacillus anthracis, the etiological agent of anthrax, and the closely related species Bacillus cereus and Bacillus thuringiensis, possess an exosporium, which is the outermost structure surrounding the mature spore. It consists of a paracrystalline basal layer and a hair-like outer layer. To date, the structural contribution of only one exosporium component, the collagen-like glycoprotein BclA, has been described. It is the structural component of the hair-like filaments. Here, we describe two other proteins, ExsFA and ExsFB, which are probably organized in multimeric complexes with other exosporium components, including BclA. Single and double exsF deletion mutants were constructed and analyzed. We found that inactivation of exsF genes affects the BclA content of spores. BclA is produced by all mutants. However, it is partially and totally released after mother cell lysis of the DeltaexsFA and DeltaexsFA DeltaexsFB mutant strains, respectively. Electron microscopy revealed that the exsF mutant spores have defective exosporia. The DeltaexsFA and DeltaexsFA DeltaexsFB spore surfaces are partially and totally devoid of filaments, respectively. Moreover, for all mutants, the crystalline basal layer appeared unstable. This instability revealed the presence of two distinct crystalline arrays that are sloughed off from the spore surface. These results indicate that ExsF proteins are required for the proper localization of BclA on the spore surface and for the stability of the exosporium crystalline layers.

In vivo Bacillus anthracis gene expression requires PagR as an intermediate effector of the AtxA signalling cascade.

Transcription of the major Bacillus anthracis virulence genes is triggered by CO2, a signal mimicking the host environment. A 182-kb plasmid, pXO1, carries the anthrax toxin genes and the genes responsible for their regulation of transcription, namely atxA and, pagR, the second gene of the pag operon. AtxA has major effects on the physiology of B. anthracis. It coordinates the transcription activation of the toxin genes with that of the capsule biosynthetic enzyme operon, located on the second virulence plasmid, pXO2. In rich medium, B. anthracis synthesises alternatively two S-layer proteins (Sap and EA1). An exponential phase "Sap-layer" is subsequently replaced by a stationary phase "EA1-layer". S-layer gene transcription is controlled by alternative sigma factors and by Sap acting as a transcriptional repressor of eag. Furthermore, in vitro in presence of CO2 and in vivo, AtxA is part of the sap and eag regulatory network. Only eag is significantly expressed in these conditions and this is due to AtxA activating eag and repressing sap transcription. PagR, and not AtxA itself, is the direct effector of this regulation by binding to sap and eag promoter regions. Therefore, PagR mediates the effect of AtxA on eag and sap and is the most downstream element of a signalling cascade initiated by AtxA. Taken together, these results indicate that the B. anthracis transcriptional regulator AtxA is controlling the synthesis of the three toxin components and of the surface elements (capsule and S-layer). Thus, AtxA is a master regulator that coordinates the response to host signals by orchestrating positive and negative controls over genes located on all genetic elements.

Polymorphism in the collagen-like region of the Bacillus anthracis BclA protein leads to variation in exosporium filament length.

We recently identified a Bacillus anthracis glycoprotein which is a structural constituent of the exosporium filaments (P. Sylvestre, E. Couture-Tosi, and M. Mock, Mol. Microbiol. 45:169-178, 2002). This Bacillus collagen-like protein (BclA) contains an internal collagen-like region (CLR) of GXX repeats which includes a large proportion of GPT triplets. Here, we report that the polymorphic marker Ceb-Bams13, for which there are nine alleles (P. Le Flèche et al., BMC Microbiol. 1:2, 2001), maps within the open reading frame encoding BclA. The bclA gene in 11 B. anthracis strains representative of seven Ceb-Bams13 alleles was sequenced and compared to the Ames bclA gene sequence. The amino- and carboxy-terminal sequences surrounding the CLR are conserved. The CLR itself is highly polymorphic: it contains between 17 and 91 GXX repeats and one to eight copies of the 21-amino-acid sequence (GPT)(5)GDTGTT, named the BclA repeat. The length of the filament on the spore surface differed between the strains. We exchanged the bclA gene between strains with different CLRs and examined the spore surfaces by electron microscopy analysis. The length of the BclA CLR is responsible for the variation in filament length.

Structural analysis and evidence for dynamic emergence of Bacillus anthracis S-layer networks.

Surface layers (S-layers), which form the outermost layers of many Bacteria and Archaea, consist of protein molecules arranged in two-dimensional crystalline arrays. Bacillus anthracis, a gram-positive, spore-forming bacterium, responsible for anthrax, synthesizes two abundant surface proteins: Sap and EA1. Regulatory studies showed that EA1 and Sap appear sequentially at the surface of the parental strain. Sap and EA1 can form arrays. The structural parameters of S-layers from mutant strains (EA1(-) and Sap(-)) were determined by computer image processing of electron micrographs of negatively stained regular S-layer fragments or deflated whole bacteria. Sap and EA1 projection maps were calculated on a p1 symmetry basis. The unit cell parameters of EA1 were a = 69 A, b = 83 A, and gamma = 106 degrees, while those of Sap were a = 184 A, b = 81 A, and gamma = 84 degrees. Freeze-etching experiments and the analysis of the peripheral regions of the cell suggested that the two S-layers have different settings. We characterized the settings of each network at different growth phases. Our data indicated that the scattered emergence of EA1 destabilizes the Sap S-layer.

A collagen-like surface glycoprotein is a structural component of the Bacillus anthracis exosporium.

Bacillus anthracis, the aetiological agent of anthrax, is a Gram-positive spore-forming bacterium. The exosporium is the outermost integument surrounding the mature spore. Here, we describe the purification and the characterization of an immunodominant protein of the spore surface. This protein was abundant, glycosylated and part of the exosporium. The amino-terminal sequence was determined and the corresponding gene was identified. It encodes a protein of 382 amino acid residues, the central part of which contains a region of GXX motifs presenting similarity to mammalian collagen proteins. Thus, this collagen-like surface protein was named BclA (for Bacillus collagen-like protein of anthracis). BclA was absent from vegetative cells; it was detected only in spores and sporulating cells. A potential promoter, dependent on the sigma factor sigma(K), which is required for a variety of events late in sporulation, was found upstream from the bclA gene. A bclA deletion mutant was constructed and analysed. Electron microscopy studies showed that BclA is a structural component of the filaments covering the outer layer of the exosporium.

Developmental switch of S-layer protein synthesis in Bacillus anthracis.

Adjustment of the synthesis of abundant protein to the requirements of the cell involves processes critical to the minimization of energy expenditure. The regulation of S-layer genes might be a good model for such processes because expression must be controlled, such that the encoded proteins exactly cover the surface of the bacterium. Bacillus anthracis has two S-layer genes, sap and eag, encoding the S-layer proteins Sap and EA1 respectively. We report that the production and surface localization of Sap and EA1 are under developmental control, suggesting that an exponential phase 'Sap layer' is subsequently replaced by a stationary phase 'EA1 layer'. This switch is controlled at the transcriptional level: sap is most certainly transcribed by RNA polymerase containing sigmaA, whereas eag expression depends on sigmaH. More importantly, Sap is required for the temporal control of eag, and EA1 is involved in strict feedback regulation of eag. This control may be direct because both S-layer proteins bind, in vitro, the eag promoter, specifically suggesting that they might act as transcriptional repressors.

Inactivation of the spirochete recA gene results in a mutant with low viability and irregular nucleoid morphology.

Recently, we have shown the first evidence for allelic exchange in Leptospira spp. By using the same methodology, the cloned recA of Leptospira biflexa was interrupted by a kanamycin resistance cassette, and the mutated allele was then introduced into the L. biflexa chromosome by homologous recombination. The recA double-crossover mutant showed poor growth in liquid media and was considerably more sensitive to DNA-damaging agents such as mitomycin C and UV light than the wild-type strain. The efficiency of plating of the recA mutant was about 10% of that of the parent strain. In addition, microscopic observation of the L. biflexa recA mutant showed cells that are more elongated than those of the wild-type strain. Fluorescent microscopy of stained cells of the L. biflexa wild-type strain revealed that chromosomal DNA is distributed throughout most of the length of the cell. In contrast, the recA mutant showed aberrant nucleoid morphologies, i.e., DNA is condensed at the midcell. Our data indicate that L. biflexa RecA plays a major role in ensuring cell viability via mechanisms such as DNA repair and, indirectly, active chromosome partitioning.