Comparison between twin block appliance and mandibular advancement on clear aligners in the improvement of airway dimension: incremental versus maximum bite advancement.

Objective: The aim of the present retrospective study was to compare the changes resulting from treatment using the MA and the TB with special regard to the oro-and naso-pharyngeal sagittal airway dimensions in subjects with dentoskeletal Class II malocclusions and positive history of Sleep Disorder Breathing (SDB) diagnosed through the Pediatric Sleep Questionnaire (PSQ). Materials and methods: This retrospective study involved 2 groups of subjects: patients treated with Twin Block (TB group: n = 22, 10 males, 12 females; mean age 12.0 ± 1.3 years) and patients treated with Mandibular Advancement (MA group: n = 23, 11 males, 12 females; mean age 12.2 ± 1.1 years). Pretreatment (T1) and posttreatment (T2) lateral cephalograms were analyzed. All patients underwent the PSQ to diagnose SDB. Results: In both treated groups there was an increase in the airways dimensions and an improvement in symptoms related SDB. The statistical comparison of the changes between T1 and T2 in the TB group showed a significant increment in upper airway size (PNS-AD2, +1.50 mm + -3.30; McNamara's upper pharynx dimension, +2.21 + -4.21) after active treatment. The MA group showed similar results during active treatment with a significant increase in both upper (PNS-AD2, +2.72 + -2.65; McNamara's upper pharynx dimension, +2.97 + -3.07) and lower (PNS-AD1, +2.17 mm + -3.54) airway size. Conclusions: Despite the different structure of these two devices and the different advancement protocols, both appliances were valuable as a suitable treatment option for Class II patients with respiratory disorders, inducing an increase of upper and lower airway size and a significant reduction in diurnal symptoms.

Wilson curve modification in permanent dentition: a retrospective comparison between clear aligners and continuous archwire treatment.

OBJECTIVES: To evaluate leveling of the Curve of Wilson (COW) by two different treatment appliances (clear aligners [CA] and continuous archwire fixed appliances [FA]) in a permanent dentition sample of patients. MATERIALS AND METHODS: Digital casts of 40 patients (CA group = 20 patients; FA group = 20 patients) were collected. Angular values for COW, right and left vertical height difference of lower first molars, and linear distance between lower teeth and the WALA ridge were analyzed for pre- (T1), posttreatment (T2) and on final virtual (ClinCheck) models (T2-CC) of the CA group. An unpaired t-test was used to evaluate significant intergroup differences (P < .05), while a paired t-test was used for posttreatment CA intragroup comparison. RESULTS: FA group showed better control of second molar crown positions compared to CA group (47-WALA = -0.2 ± 0.1 mm, 37-WALA = -0.6 ± 0.3 mm). No significant difference was detected for linear distance of lower first molars and the WALA ridge or for vertical height difference. CA group showed a greater reduction of distance between lower premolars and the WALA ridge (mean difference: -0.5 mm for both 45-WALA and 35-WALA; mean difference: -0.5 mm for 44-WALA, -0.6 mm for 34-WALA). Predictability for the CA group was high for every measurement (87% Right COW, 89% Left COW, 88% 46 Vertical Diff, 87% 36 Vertical Diff). CONCLUSIONS: Clear aligner and continuous archwire mechanics were effective in leveling COW. FA was more effective in changing crown position of lower second molars with respect to the WALA ridge, while CA provided a greater distance reduction between lower premolars and WALA ridges compared to FA.

Predictability of expansion movements performed by clear aligners in mixed dentition in both arches: a retrospective study on digital casts.

BACKGROUND: to evaluate the predictability of expansion achieved in patients in early mixed dentition treated with Clear Aligners (CA), analyzing the efficiency of the expansion at the end of the first set of aligners and at the end of the therapy in the upper and lower arch. METHODS: 36 patients (20 F, 16 M; mean age 8.3 ± 1.5 years) were selected retrospectively from the Department of Orthodontics of the Hospital of Rome "Tor Vergata". All subjects were treated with CA with no other auxiliaries than attachments. For each patient a standardized sequential expansion protocol was planned for both arches. Digital dental casts were created at three observation periods from an intraoral scanner: prior to treatment (T0), at the end of the first set of aligners (T1), at the end of treatment (T2). The 3D models in planned position determined by the first Clincheck (CC) were obtained for comparison with T1 and T2. Six linear transversal measurements were used to evaluate the dimensional changes and the predictability of expansion movements, comparing T1-CC and T2-CC. RESULTS: a statistically significant increase within the pre-treatment and the final outcomes for all the variables examined was found. In the upper arch, the greatest level of predictability was detected at the level of the first (46.44%) and second deciduous molar width (44.95%) at T1. The analysis of T2-CC changes showed a significant increase in the percentage of predictability of expansion at the level of the first permanent molars, at mesial (54.86%) and distal (58.92%) width. In the lower arch, a higher percentage of predictability than the upper arch was reported at T1-CC and T2-CC, with the greatest values at the level of second (T1-CC: 48.70%; T2-CC: 75.32%) and first deciduous molar width (T1-CC: 45.71%; T2-CC: 72.75%). CONCLUSIONS: CA can induce significant transversal increments. The predictability of expansion is variable, but it did not exceed the 50% during the first set of aligners. It was necessary to apply refinement set to achieve a good predictability for expansion of about 70%. The expansion in the lower arch was observed to be more predictable than in the upper arch.

Severe Crowding Associated with Lower Canine Premature Resorption: Interceptive Treatment with Clear Aligners-A Pilot Study.

BACKGROUND: Early mixed dentition represents a critical phase since crowding conditions can occur. The interceptive resolution of dental crowding allows favorable arch and occlusal development. The aim of the present investigation was to evaluate dentoalveolar changes of clear aligner treatment planned to manage lower incisor crowding, loss of arch length, and midline deviation in early mixed dentition. METHODS: A total of 13 patients (7 females, 6 males, 9.4 ± 1.2 age) treated with clear aligners were selected. Arch dimensions and incisor inclinations were evaluated before (T0) and at the end of interceptive treatment (T1). A paired t-test was chosen to compare T1-T0 changes. The level of significance was set at 5%. RESULTS: The greatest significant increase in mandibular width was observed at the level of the first deciduous molars (+2.44 ± 1.4 mm), followed by the second permanent molars (+2.16 ± 1.4 mm). Lower arch length and arch depth showed a statistically relevant increase (2 ± 0.6 mm and 4.5 ± 1.6 mm, respectively). The mean lower dental midline changes were statistically significant (1.42 ± 0.73 mm). CONCLUSIONS: Early treatment with clear aligners, including the combination of transversal arch development, maintenance of leeway space, and guidance of eruption, represents a valid treatment strategy in early mixed dentition to manage arch crowding and occlusion development.

Friction and wear behavior of a mechanical oscillating strip system used for interproximal enamel reduction: a quantitative and qualitative scanning electronic microscope evaluation.

OBJECTIVES: To evaluate wear and friction properties of oscillating strips in order to validate the importance of a standardized interproximal enamel reduction (IPR) sequence to preserve their efficiency and lifetime. MATERIALS AND METHODS: Fifteen complete oscillating IPR sequences were tested by means of tribological tests (Linear Reciprocating Tribometer, C.S.M. Instruments, Peseaux, Switzerland). Fifteen single 0.2-mm metallic strips underwent a long continuous cycle of 240 minutes. Strip surface roughness and waviness measurements were assessed by means of a contact probe surface profiler (TalySurf CLI 2000; Taylor Hobson, Leicester, UK) and TayMap software. Statistical analysis was performed with independent-samples t-test. Significance was at the P < .05 level. Scanning electronic microscopy analysis of strip surfaces was conducted with an FEI Quanta 200 (Hillsboro, Ore) in high vacuum at 30.00 kV. RESULTS: Resin strips revealed a significant reduction in surface roughness (Ra, Rt, RDq) and a significant increase in waviness parameters (Wa, Wt). Rt and RDq values significantly decreased upon use of the metallic strips. Significantly higher values of Wa (+ 2.84 µm) and Wt (+0.1 µm) were observed only for the 0.2-mm metallic strips. Higher friction values were observed when the metallic strips were tested singularly rather than within the entire sequence. Lower Ra and Rt values were revealed when 0.2-mm metallic strips were tested up to 240 minutes. CONCLUSIONS: The application of a standardized oscillating sequence allows for more efficient wear performance of the strips with a significant impact on their abrasive power and lifetime.

Long-term effects produced by early treatment of Class III malocclusion with rapid maxillary expansion and facemask followed by fixed appliances: A multicentre retro-prospective controlled study.

OBJECTIVE: To assess the short- and long-term dentoskeletal effects of early Class III treatment with rapid maxillary expansion and facemask (RME/FM) followed by fixed appliances. MATERIALS AND METHODS: A total of 44 patients (27 females, 17 males) treated consecutively with RME/FM were included from the archives of 3 centres. Three lateral cephalograms were available: T0 (before the start of RME/FM therapy, mean age 8.1 ± 1.8 years), T1 (immediately after RME/FM, mean age 9.8 ± 1.6 years), and T2 (long-term observation, mean age 19.5 ± 1.6 years). A control group of 17 untreated Class III subjects (12 females and 5 males) also was selected. Between-group statistical comparisons were performed with ANCOVA. RESULTS: No statistically significant differences for any of the cephalometric variables were found at T0. In the short term, the treated group showed significant improvements in ANB (+2.9°), Wits appraisal (+2.7 mm), SNA (+1.8°) and SNB (-1.1°). A significant closure of CoGoMe angle (-1.3°) associated with smaller increments along Co-Gn (-2.4 mm) also was found together with a significant increase in intermaxillary divergence (+1.3°). In the long-term, significant improvements in ANB (+2.6°), Wits appraisal (+2.7 mm) and SNB (-1.7°) were recorded together with a significant closure of the CoGoMe angle (-2.9°). No significant long-term changes in vertical skeletal relationships were found. CONCLUSIONS: RME/FM therapy was effective in improving Class III dentoskeletal relationships in the short term. These changes remained stable in the long-term due mainly to favourable mandibular changes.

Long-Term Assessment of Treatment Timing for Rapid Maxillary Expansion and Facemask Therapy Followed by Fixed Appliances: A Multicenter Retro-Prospective Study.

BACKGROUND: to determine the role of treatment timing in the long-term effects produced by rapid maxillary expansion and facemask therapy (RME/FM) in Class III patients. METHODS: This study compared two sample groups treated with RME/FM followed by fixed appliances: the early prepubertal group (EPG) (17 patients; mean age before treatment (T0), 5.8 ± 0.7 years; range, 4.3-6.9 years) and the late prepubertal group (LPG) (17 patients; mean age at T0, 10.1 ± 0.8 years; range, 9.0-11.1 years). Lateral cephalograms for the two groups were examined before treatment (T0) and at a long-term observation (T1) (EPG, 19.8 ± 1.0 years; LPG, 21.0 ± 2.1 years). Independent sample t-tests were performed to compare the two groups at T0 and T1. RESULTS: No statistically significant differences were found for any of the cephalometric variables at T0, except for the total mandibular length, overjet, and inclination of the maxillary incisors to the palatal plane, which were greater in the LPG. At T1, no statistically significant differences were detected for any of the cephalometric variables. CONCLUSIONS: There were no significant long-term differences when treating Class III patients with RME/FM, either during an early prepubertal phase (≤7 years of age) or during a late prepubertal phase (≥9 years of age).

Upper Airway Characteristics and Morphological Changes by Different MADs in OSA Adult Subjects Assessed by CBCT 3D Imaging.

This study aimed to analyse the effectiveness of four different designs of the Mandibular Advancement Device (MAD) and the morphological changes on upper airway characteristics of Obstructive Sleep Apnea (OSA) patients inducted by each of them, detected by Cone Beam Computer Tomography (CBCT) 3D imaging. Twenty-two patients were recruited after an OSA diagnosis with PSG. Four different customised and titratable MADs were used and an initial CBCT scan was obtained for each patient. Six months after the end of the MAD titration phase, all the subjects performed a second PSG with the MAD in situ; the second PSG showed an Apnoea-Hypopnoea Index (AHI) of <5 or a decrease of 50% in AHI when compared with the initial AHI. Moreover, a second CBCT scan with the MAD in situ was performed. DICOM files were imported into the airway analysis software programme and the pharyngeal area around the oropharynx was highlighted. The area and volume of the oropharynx with and without the device was evaluated. A considerable improvement of the airway was observed (+33.76%), and a significant difference in the enlargement ratio between the posterior soft palate (+32.41%) and the posterior tongue (+36.96%) region was also found. The greatest increase in airway volume was achieved in patients treated with the MAD Forward and TAP (+42.77% and +41.63%, respectively). MAD therapy is effective to treat moderate to severe OSA with an increased upper airway volume. The design of the MAD can influence the effectiveness of the treatment.

Effects of IPR by mechanical oscillating strips system on biological structures: a quantitative and qualitative evaluation.

BACKGROUND: To evaluate by means of profilometric analysis and scanning electronic microscope (SEM) the effects on enamel surfaces of oscillating mechanical systems for interproximal enamel reduction (IPR). Fifteen complete (Group 1) oscillating IPR sequence and 15 single metallic strips (Group 2) for active IPR phase of 0.2 mm were selected and tested on 30 freshly extracted teeth by means of tribological tests with alternative dry-sliding motion (Linear Reciprocating Tribometer, C.S.M. Instruments, Peseaux, Switzerland). Enamel surface roughness and waviness measurements were assessed by contact probe surface profiler (TalySurf CLI 2000; Taylor Hobson, Leicester, UK) and a TayMap software for the 3D analysis. Statistical analysis was performed with independent samples t-test. Significance was established at the P < .05 level. SEM analysis of enamel surfaces was conducted with a FEI Quanta 200 (Hillsboro, USA) in high vacuum at 30.00 kV. Images were acquired at 30X, 100X, and 300X of magnification. RESULTS: Teeth undergone Group 1 showed lower values of surface roughness (Ra - 0.34 µm, Rt - 1.55 µm) and significant increase of waviness parameters (Wa 0.25 µm, Wt 4.02 µm) when compared with those treated with Group 2. SEM evaluation showed smoothers and more regular surfaces when IPR was performed by complete IPR sequence. Single metallic strip determined more irregular surfaces characterized by extended grooves, alternated with enamel ridges and irregular fragments. CONCLUSION: The adoption of a standardized oscillating IPR sequence determines more regular and harmonious enamel surfaces at the end of the procedure. An adequate polishing after IPR plays a crucial role to guarantee a good long-term prognosis and a good respect of biological structures.

Dentoskeletal effects of clear aligner vs twin block-a short-term study of functional appliances.

PURPOSE: The twin block (TB) is one of the most widely used functional appliances for the correction of class II malocclusions. Align Technology (San Jose, CA, USA) developed the Invisalign® mandibular advancement (MA) that replicates the mechanism of action of a functional appliance. The aim of this study was to compare the changes produced by the TB versus those by MA. METHODS: The records of 56 class II patients treated with the TB (TB group: n = 35) or the MA (MA group: n = 21) were compared to a control sample of 15 untreated class II subjects (UC2). RESULTS: The TB and MA groups showed a significant reduction of the ANB angle, compared to the controls (TB group: -1.5°; MA group: -1.5°; UC2 group: +0.2°). For the Co-Gn values, the TB and MA groups showed significant differences when compared with the UC2 group with an increase of 8.4 mm in TB patients and of 8.3 mm in MA patients. The increase of the distance of Pg to the true vertical line (TVL) was the only measurement where significant differences between the three groups were found with a greater advancement of the soft tissue pogonion in the TB group compared with the MA group and the UC2 group (TB group: +3 mm; MA group: +0.9 mm; UC2 group: -1.6 mm). The angle between the palatal plane and mandibular plane revealed a more relevant reduction in the TB and MA groups. Both appliances were able to reduce overjet and vertical overbite values. CONCLUSIONS: Treatment with the MA and TB appliances produced a significant elongation of the mandible with an improvement in sagittal relationship, overjet, and vertical overbite and with good control of the vertical relationship. TB subjects showed a greater advancement of the soft tissue chin.

Upper arch dimensional changes with clear aligners in the early mixed dentition : A prospective study.

BACKGROUND: One goal of orthodontic treatment in mixed dentition is to expand the maxillary arch to allow proper tooth alignment and a correction of sagittal and vertical malocclusions. However, for most treatment protocols, expected outcome is not really clear to allow for a standardization of phase I orthodontic treatments. This lack of information makes it difficult for clinicians to predict tooth movements, including transverse expansion efficacy with Invisalign® (Align Technology, Santa Clara, CA, USA) in children. Therefore, the aim of the present study was to evaluate the transverse maxillary arch development with the Invisalign First System® in growing subjects. METHODS: The study group included 23 subjects (9 females, 14 males, mean age 9.4 ± 1.2 years). Patients were treated nonextraction with Invisalign First System® clear aligners with no auxiliaries other than Invisalign® attachments. Transverse interdental widths were measured only in the upper arch on each model at the start (T1) and at the end (T2) of treatment. A paired t­test was chosen to compare T2-T1 changes. The level of significance was set at 5%. RESULTS: The greatest increase of maxillary width was detected at the level of the upper first deciduous molars (+3.7 ± 1.4 mm; P < 0.001), followed by the level of the second deciduous molars (+3.4 ± 1.6 mm; P < 0.001) and by the deciduous canine (+2.6 ± 2.0 mm; P < 0.001). Upper first molars showed a greater expansion in the intermolar mesial width (+3.2 ± 1.2 mm; P < 0.001) than in the intermolar distal (+1.7 ± 1.2 mm; P < 0.001) and transpalatal width (+1.2 ± 1.2 mm; P < 0.01). CONCLUSIONS: The Invisalign First System® can be considered effective in growing patients who require maxillary arch development. The greatest net increase was detected at the level of upper first deciduous molars, whereas the upper first molars showed a greater expansion in the intermolar mesial width due to a rotation that occurs around its palatal root.

Dentoskeletal effects of rapid maxillary expander therapy in early mixed dentition patients with different vertical growing patterns without posterior crossbite: A retrospective study.

INTRODUCTION: This study aimed to analyze the variation of dentoskeletal effects after rapid maxillary expander therapy in subjects with different vertical growth patterns. METHODS: The study sample consisted of 94 patients (32 males, 62 females; mean age 8.9 ± 1.5 years) treated with rapid maxillary expander (RME) anchored on first permanent molars. For each subject, lateral cephalograms and maxillary digital dental casts were available before RME, immediately after appliance removal, and 1 year after appliance removal. All the subjects were divided into 3 groups according to their vertical facial patterns (low-angle, normal-angle, and high-angle). Cephalometric analysis was conducted on lateral cephalograms. The virtual 3-dimensional models were used to analyze the torque of the first permanent molars and intercanine and intermolar width. The differences between the vertical facial subgroups were contrasted by analysis of variance multicomparison test (P <0.05). RESULTS: In the short-term (from before to immediately after RME removal), high-angle subjects showed a mandibular clockwise rotation compared with other groups. No significant long-term vertical and sagittal skeletal changes (from before to 1 year after RME removal) were found between the groups. A greater increase in maxillary molar torque was observed in high-angle subjects than in the other groups. The low-angle patients showed a greater increase in the intercanine diameter. CONCLUSIONS: Hyperdivergent subjects showed increased buccal tipping of the anchor molars after the expansion. Hypodivergent and normodivergent subjects showed lower buccal tipping after the expansion and an increased expansion effect in the anterior region.

Mandibular morphometric analysis in open bite early treatment relapse subjects: a retrospective observational pilot study.

BACKGROUND: The purpose of this retrospective study was to evaluate the mandibular shape differences between a group of success and a group of failure Anterior Open Bite (AOB) malocclusion early orthodontic treatment in growing subjects, in order to identify mandibular features of relapse. METHODS: Twenty three patients (7 males, 16 females, 9.3 years ±1,5 years) were enrolled from the Department of Orthodontics at the University of Rome Tor Vergata. Inclusion criteria were: white ancestry, overbite < 0 mm, mixed dentition phase, end-to-end or Class I molar relationship, first skeletal class assessed on lateral cephalograms (0° < ANB < 4°), cervical skeletal maturation CS1-CS2, no previous orthodontic treatment, no congenital diseases. Pre-treatment (T1) lateral cephalograms were acquired. Each patient underwent early orthodontic treatment with Rapid Maxillary Expander (RME) and Bite Block (BB) or Quad-Helix Crib (QHC) until open bite correction. Radiographic records were recollected at T2 (permanent dentition, skeletal cervical maturation CS3-CS4). Mean interval time T2-T1 was 4.2 years ±6 months. According to treatment stability, a Relapse Group (RG 11 patients, 3 M, 8F; 13.7 years ±8 months, 7 subjects treated with RME/BB, 4 with QH/C) and a Success Group (SG, 12 patients, 4 M, 8F; 13.4 ± 10 months, 7 subjects treated with QH/C, 5 with RME/BB) were identified. On the lateral radiographs the mandibular length (Co-Gn), the inferior gonial angle (NGo^GoMe) and the antegonial notch depth (AND) were analyzed. Then the mandibular Geometric Morphometric analysis (GMM) was applied. Intergroup statistically significant differences were found using student's t-tests. Procrustes analysis and principal component analysis (PCA) were performed for the GMM. RESULTS: At T1 no statistically significant differences were found between RG and SG, however higher values of antegonial notch depth were found in RG. T2-T1 comparison showed in RG statistically significant increases in Co-Gn (p = 0.04), NGo^GoMe angle (p = 0.01) and antegonial notch depth (p = 0,04). PC1 confirmed the increase in the antegonial notch depth in RG when compared to SG at T2. CONCLUSIONS: The increased antegonial notch depth associated with the increased mandibular length and the increased gonial angle could be responsible of relapse of early orthodontic treatment in open bite growing subjects.

Analysis of Maxillary First Molar Derotation with Invisalign Clear Aligners in Permanent Dentition.

The objective of this study was to examine the distal rotation of mesial rotated maxillary first permanent molars in a sample of Class II dental malocclusion adult patients treated with Invisalign Clear Aligners (CA). Forty patients (20 males, 20 females, 22.4 ± 3.9 years) were included in the study sample (Department of Orthodontics of University of Rome "Tor Vergata"). Inclusion criteria were: Caucasian ancestry, complete permanent dentition with fully erupted upper second molars, Class II molar relationship, absence of tooth or craniofacial anomalies or caries and periodontal diseases. Pre-treatment (T1), post-treatment (T2) digital casts, and final ClinCheck simulation models (T2CC) were analysed. To measure the rotation of maxillary first molars, Henry's angle (H°) was evaluated. Maxillary first molars with an H° > 11° were considered mesio-rotated (in total 59 teeth). The treatment CA protocol included disto-rotation without distalization movements. At T1, T2 and T2CC five measurements on the collected dental casts were analysed: Henry's angle (H°); mesial buccal expansion (ME); distal buccal expansion (DE); mesial buccal sagittal (MS); and distal buccal sagittal (DS). A comparison between the results of T2-T1 and T2CC-T2 was performed using a paired t-test. The differences between T2-T1 highlighted a significant distal rotation of the maxillary first molars (−7.4°) and an expansion movement of 2.20 mm for ME and 1.50 mm for DE. In the post-treatment, the mesial buccal cusps shifted of 1.0 mm, while the distal buccal cusps showed a distal movement of 0.9 mm. Analysing the H° comparison between T2CC-T2, the difference was −1.1°. The T2CC-T2 comparison in the sagittal plane showed a difference of 0.9 mm for the MS and 0.7 mm for the DS. The accuracy was 82% for molar derotation movement. In conclusion, CA provides the upper arch expansion associated with the upper first molars' distal rotation. These movements provide 2 mm of improvement in arch perimeter and molar intercuspation.

Effects of pendulum appliance versus clear aligners in the vertical dimension during Class II malocclusion treatment: a randomized prospective clinical trial.

BACKGROUND: The aim of the present study was to compare the effects on vertical dentoskeletal dimension produced by Pendulum appliance and Clear Aligners in patients with Class II malocclusion. TRIAL DESIGN: This is a prospective two-arm parallel group randomized clinical trial with 1:1 allocation ratio. METHODS: The Pendulum Group (PG) consisted of 20 patients (15F, 5 M) with a mean age of 17.2 ± 4.3 years. The Clear Aligners Group (CAG) comprised 20 patients (13F, 7 M) with a mean age of 17.2 ± 3.2 years. Distalization's protocol in PG involved the activation of TMA wires till the achievement of Class I molar relationship. A protocol of sequential distalization was applied in the CAG. For each subject lateral cephalograms have been analyzed before treatment (T1) and at the end of the therapy (T2). Descriptive statistics and statistical between-group comparisons (PG vs CAG) were calculated for the craniofacial starting forms at T1 and for the T2-T1 changes. Statistical between-group comparisons for the T2-T1 changes were performed with independent samples t-tests (P < 0.05). RESULTS: The PG showed significantly greater increases in SN^GoGn° when compared with CAG (+ 2.1 and - 0.3 degrees, respectively). Clockwise rotation of the occlusal plane with significantly greater increase of SN^POccl angle was observed in PG (+ 2.8 degrees) when compared with CAG (- 4.2 degrees). The PG revealed a significant increase in the N-Me variable with a mean change of + 4.4 mm compared to the CAG with mean values of - 1.2 mm. The PG showed an increase in the ArGo^GoMe angle (+ 0.7° degrees) compared to the CAG (- 3.4° degrees). The PG showed significantly greater increases in both maxillary and mandibular first molar to palatal plane (+ 1.3 and + 2.1 mm, respectively) when compared with CAG (- 0.9 and - 0.2 mm, respectively). CONCLUSIONS: Upper molar distalization with clear aligners represents a valid alternative to non-extraction treatment of Class II malocclusion, reducing the extrusion of maxillary first molars and improving the management of the occlusal plane and vertical dimension. TRIAL REGISTRATION: ClinicalTrials.gov, NCT05298280. Registered 28 March 2022-Retrospectively registered, https://clinicaltrials.gov .

Light-curing process for clear aligners' attachment reproduction: comparison between two nanocomposites cured by the auxiliary of a new tool.

BACKGROUND: Attachments' configuration play an important role during Clear Aligner Treatment (CAT) for aligner retention and control of movements planned. The aims were to compare the macroscopic morphology of attachments reproduced with flowable (FNC) and conventional (CNC) composites and the effects on them of two light-guide tips with different dimensions. METHODS: 4 resin casts derived from the initial scan of the same patient were obtained. 10 vestibular attachments were replaced on both upper and lower arches of each model with CNC (Models A, B) and FNC (Models C, D). Each composite was cured by means of the same LED lamp with both regular light-guide (Models A, B) and push and light tool® (Models C, D). The 80 attachments were qualitative analyzed by means of a digital stereo microscope. Surface roughness and waviness measurements were assessed by contact probe surface profiler (TalySurf CLI 2000; Taylor Hobson, Leicester, United Kingdom). Statistical analysis was performed with independent samples t-tests. Significance was established at the P < 0.05 level. RESULTS: Model A showed lower values of surface roughness (Ra - 1.41 µm, Rt - 3.46 µm) and waviness (Wa - 2.36 µm, Wt - 10.95 µm) when compared with Model C. Significant reduction of waviness (Wa - 3.85 µm, Wt - 4.90 µm) was observed on Model B when compared with Model D. Significant increase of roughness and waviness parameters (Ra 3.88 µm, Rt 21.07, Wa 2.89 µm, Wt 14.74 µm) was found when CNC sample (Model A) was cured with regular light-guide tip. Higher values (Ra 2.33 µm, Rt 24.07 µm, Wa 1.67 µm, Wt 20.79 µm) were observed after regular light-guide tips curing on FNC sample (Model C). CONCLUSIONS: CNC resins determine more regular surfaces of attachments profiles. The additional use of a smaller light- guide of the LED push and light tool® allows to improve the macroscopic morphology of the attachments and to maximize light irradiance delivering by enhancing the polymerization process and the integrity of the features during the treatment.

Evaluation of the Upper Arch Morphological Changes after Two Different Protocols of Expansion in Early Mixed Dentition: Rapid Maxillary Expansion and Invisalign® First System.

Background: The objective of this retrospective study was to analyze the morphological changes of the upper arch after two protocols of expansion, the Invisalign® First system and rapid maxillary expansion (RME), in mixed dentition by means of geometric morphometric analysis (GMM). Methods: Digital dental casts of 32 children treated either with RME (RME group: 17 subjects; mean age 8.1 years) or the First system (First group: subjects; mean age 8.4 years) were collected. For both the RG and FG, pre-(T1) and post-treatment(T2) digital models were created. A total of 14 landmarks were digitized and GMM was applied. Procrustes analysis and principal component analysis (PCA) were performed. Results: The PC1 resulting from the T2-T1 comparison in the RG g showed statistically significant morphological changes in the posterior region of the upper arch shape, without significant variations in the anterior region. The comparison of the T2-T1 changes in the FG showed an increase in the transverse dimension at the level of the canine and the first deciduous molar widths, with morphological variation in the anterior region due to frontal teeth alignment. Conclusions: The First system induced shape modifications of the upper arch during expansion in contrast to RME. The FG presented an improvement in the maxillary arch shape, while the RG maintained the initial triangular shape.

Leveling the curve of Spee: Comparison between continuous archwire treatment and Invisalign system: A retrospective study.

INTRODUCTION: The purpose of this study was to evaluate and compare leveling of the curve of Spee (COS) achieved by traditional fixed appliances and Invisalign clear aligners (Align Technology, Santa Clara, Calif). METHODS: This retrospective study involved 2 groups of subjects with an increased COS depth. Patients treated with the Invisalign system (I group) and patients treated with the standard edgewise full-fixed appliance (F group). The I group included 30 subjects (13 males, 17 females; mean age, 24 years 5 months ± 19 months). The F group included 32 subjects (12 males, 20 females; mean age, 22 years 4 months ± 21 months). The 2 groups were matched for sex, age, vertical pattern, and observation period. Pretreatment (T0) and posttreatment (T1) lateral cephalograms were analyzed. COS depth was measured on digital dental casts. The intragroup variation between T0 and T1 was analyzed with a paired t test. The intergroup variation was evaluated using an unpaired t test. RESULTS: The leveling of COS was statistically significant, comparing T0 and T1 within the groups. The F group presented a statistically significant extrusion of posterior teeth, with a flaring of the mandibular incisors. The I group showed a statistically significant intrusion of the mandibular incisors, with excellent control in the proclination of incisors during the intrusion movement. CONCLUSIONS: Traditional continuous archwire treatment and the Invisalign system effectively level the COS.

Dento-skeletal response to three different protocols of rapid maxillary expansion in hyperdivergent growing subjects: a longitudinal retrospective study.

BACKGROUND: The aim of this study was to evaluate the dento-skeletal response in hyperdivergent growing patients comparing Rapid Maxillary Expansion (RME) using three different protocols. MATERIALS AND METHODS: Three groups of hyperdivergent subjects treated with RME were analyzed. In 41 patients (23F, 18M) the RME was bonded on the maxillary deciduous second molars (E-RME group); in 40 patients (24F, 16M) the RME was bonded on the first permanent maxillary molars (6-RME group); in 45 patients (26F,19M) the RME was bonded on the first permanent maxillary molars with a removable mandibular Bite-Block (6-RME/BB group). Lateral cephalograms and dental casts were scanned and digitally measured before treatment (T1), at the appliance removal (T2) and at least 1 year after the appliance removal (T3). The comparison was made within the same group and between the groups. Statistical comparisons were assessed with analysis of variance multi-comparison test (*P = 0.05). RESULTS: A significant increase of upper molars buccal tipping was observed in 6-RME group when compared with E-RME and 6-RME/BB groups in the short-term (T2-T1) and long-term (T3-T1); a significant intercanine width increase was observed in E-RME group at the same times. No significant differences in dentoalveolar variables were observed comparing E-RME group versus 6-RME/BB group. CONCLUSIONS: The E-RME protocol allows for a greater skeletal expansion and produces a lower buccal tipping of the first permanent upper molars. The use of the BB in 6-RME/BB group shows a similar attitude to the E-RME protocol then can be considered an effective therapeutic alternative.