RESUMEN
Permanent magnets are fundamental constituents in key sectors such as energy and transport, but also robotics, automatization, medicine, etc. High-performance magnets are based on rare earth elements (RE), included in the European list of critical raw materials list. The volatility of their market increased the research over the past decade to develop RE-free magnets to fill the large performance/cost gap existing between ferrites and RE-based magnets. The improvement of hard ferrites and Mn-Al-C permanent magnets plays into this important technological role in the near future. The possible substitution advantage was widely discussed in the literature considering both magnetic properties and economic aspects. To evaluate further sustainability aspects, the present paper gives a life cycle assessment quantifying the environmental gain resulting from the production of RE-free magnets based on traditional hexaferrite and Mn-Al-C. The analysis quantified an advantage of both magnets that overcomes the 95% in all the considered impact categories (such as climate change, ozone depletion, human toxicity) compared to RE-based technologies. The benefit also includes the health and safety of working time aspects, proving possible reduction of worker risks by 3-12 times. The results represent the fundamentals for the development of green magnets that are able to significantly contribute to an effective sustainable transition.
RESUMEN
There is evidence that DNA breathing (spontaneous opening of the DNA strands) plays a relevant role in the interactions of DNA with other molecules, and in particular in the transcription process. Therefore, having physical models that can predict these openings is of interest. However, this source of information has not been used before either in transcription start sites (TSSs) or promoter prediction. In this article, one such model is used as an additional information source that, when used by a machine learning (ML) model, improves the results of current methods for the prediction of TSSs. In addition, we provide evidence on the validity of the physical model, as it is able by itself to predict TSSs with high accuracy. This opens an exciting avenue of research at the intersection of statistical mechanics and ML, where ML models in bioinformatics can be improved using physical models of DNA as feature extractors.
Asunto(s)
Biología Computacional , ADN , Sitio de Iniciación de la Transcripción , Regiones Promotoras Genéticas , Biología Computacional/métodosRESUMEN
Porous silicon carbide is a promising material for ceramic receivers in next-generation concentrated solar power receivers. To investigate its tolerance to thermal shock, accelerated ageing of large coupons (50 × 50 × 5 mm) was conducted in a solar furnace to investigate the effects of thermal cycling up to 1000 °C, with gradients of up to 22 °C/mm. Non-destructive characterization by computed X-ray tomography and ultrasonic inspection could detect cracking from thermal stresses, and this informed the preparation of valid specimens for thermophysical characterization. The effect of thermal ageing on transient thermal properties, as a function of temperature, was investigated by using the light-flash method. The thermophysical properties were affected by increasing the severity of the ageing conditions; thermal diffusivity decreased by up to 10% and specific heat by up to 5%.
RESUMEN
The melting transition of Li-DNA fibers immersed in ethanol-water solutions has been studied using calorimetry and neutron diffraction techniques. The data have been analyzed using the Peyrard-Bishop-Dauxois model to determine the strengths of the intra- and inter-base pair potentials. The data and analysis show that the potentials are weaker than those for DNA in water. They become weaker still and the DNA less stable as the ethanol concentration increases but, conversely, the fibers become more compact and the distances between base pairs become more regular. The results show that the melting transition is relatively insensitive to local confinement and depends more on the interaction between the DNA and its aqueous environment.
Asunto(s)
ADN/química , Etanol/química , Calorimetría , ADN/metabolismo , Modelos Moleculares , Difracción de Neutrones , Conformación de Ácido Nucleico , Desnaturalización de Ácido Nucleico , Transición de Fase , Dispersión del Ángulo Pequeño , Soluciones/química , Termodinámica , Temperatura de Transición , Agua/químicaRESUMEN
The properties and structure of relevant interfaces involving molten alkali carbonates are studied using molecular dynamics simulation. Lithium carbonate and the Li/Na/K carbonate eutectic mixture are considered. Gas phases composed of pure CO2 or a model flue gas mixture are analyzed. Similarly, the adsorption of these gas phases on graphene are studied, showing competitive CO2 and N2 adsorption that develops liquid-like layers and damped oscillation behavior for density. The interaction of the studied carbonates with graphene is also characterized by development of adsorption layers through strong graphene-carbonate interactions and the development of hexagonal lattice arrangements, especially for lithium carbonate. The development of molten salts-vacuum interfaces is also considered, analyzing the ionic rearrangement in the interfacial region. The behavior of the selected gas phases on top of molten alkyl carbonate is also studied, showing the preferential adsorption of CO2 molecules when flue gases are considered.
RESUMEN
Polymeric electrospun fibers are becoming popular in microbial biotechnology because of their exceptional physicochemical characteristics, biodegradability, surface-to-volume ratio, and compatibility with biological systems, which give them a great potential as microbial supports to be used in production processes or environmental applications. In this work, we analyzed and compared the ability of Escherichia coli, Pseudomonas putida, Brevundimonas diminuta, and Sphingobium fuliginis to develop biofilms on different types of polycaprolactone (PCL) microfibers. These bacterial species are relevant in the production of biobased chemicals, enzymes, and proteins for therapeutic use and bioremediation. The obtained results demonstrated that all selected species were able to attach efficiently to the PCL microfibers. Also, the ability of pure cultures of S. fuliginis (former Flavobacterium sp. ATCC 27551, a very relevant strain in the bioremediation of organophosphorus compounds) to form dense biofilms was observed for the first time, opening the possibility of new applications for this microorganism. This material showed to have a high microbial loading capacity, regardless of the mesh density and fiber diameter. A comparative analysis between PCL and polylactic acid (PLA) electrospun microfibers indicated that both surfaces have a similar bacterial loading capacity, but the former material showed higher resistance to microbial degradation than PLA.
Asunto(s)
Fenómenos Fisiológicos Bacterianos , Biodegradación Ambiental , Biopelículas , Poliésteres/química , Microbiología AmbientalRESUMEN
The modification of carbon nanomaterials with biological molecules paves the way toward their use in biomedical and biotechnological applications, such as next-generation biocatalytic processes, development of biosensors, implantable electronic devices, or drug delivery. In this study, different commercial graphene derivatives, namely, monolayer graphene oxide (GO), graphene oxide nanocolloids (GOCs), and polycarboxylate-functionalized graphene nanoplatelets (GNs), were compared as biomolecule carrier matrices. Detailed spectroscopic analyses showed that GO and GOC were similar in composition and functional group content and very different from GN, whereas divergent morphological characteristics were observed for each nanomaterial through microscopy analyses. The commercial α-l-rhamnosidase RhaB1 from the probiotic bacterium Lactobacillus plantarum, selected as a model biomolecule for its relevant role in the pharma and food industries, was directly immobilized on the different materials. The binding efficiency and biochemical properties of RhaB1-GO, RhaB1-GOC, and RhaB1-GN composites were analyzed. RhaB1-GO and RhaB1-GOC showed high binding efficiency, whereas the enzyme loading on GN, not tested in previous enzyme immobilization studies, was low. The enzyme showed contrasting changes when immobilized on the different material supports. The effect of pH on the activity of the three RhaB1-immobilized versions was similar to that observed for the free enzyme, whereas the activity-temperature profiles and the response to the presence of inhibitors varied significantly between the RhaB1 versions. In addition, the apparent Km for the immobilized and soluble enzymes did not change. Finally, the free RhaB1 and the immobilized enzyme in GOC showed the best storage and reutilization stability, keeping most of their initial activity after 8 weeks of storage at 4 °C and 10 reutilization cycles, respectively. This study shows, for the first time, that distinct commercial graphene derivatives can influence differently the catalytic properties of an enzyme during its immobilization.
Asunto(s)
Grafito/química , Estabilidad de Enzimas , Enzimas Inmovilizadas , Glicósido Hidrolasas , Concentración de Iones de Hidrógeno , Lactobacillus plantarumRESUMEN
Although previously developed mesoscopic DNA models have successfully reproduced thermodynamic denaturation data, recent studies show that these overestimate the rate of denaturation by orders of magnitude. Using adapted Peyrard-Bishop-Dauxois (PBD) models, we have calculated the denaturation rates of several DNA hairpins and made comparison with experimental data. We show that the addition of a barrier at the onsite potential of the PBD model gives a more accurate description of the unzipping dynamics of short DNA sequences. The new models provide a refined theoretical insight on the dynamical mechanisms of unzipping which can have implications for the understanding of transcription and replication processes. Still, this class of adapted PBD models seems to have a fundamental limitation which implies that it is not possible to get agreement with available experimental results on the dynamics of long DNA sequences and at the same time maintain the good agreement regarding its thermodynamics. The reason for this is that the denaturation rate of long DNA chains is not dramatically lowered by the additional barrier-as the base-pairs that open are more likely to remain open, facilitating the opening of the full DNA molecule. Some care has to be taken, since experimental techniques suitable to the study of denaturation rates of long sequences seem not to agree with other experimental data on short DNA sequences. Further research, both theoretical and experimental, is therefore needed to resolve these inconsistencies-which will be a starting point for new minimalistic models that are able to describe both thermodynamics and dynamics at a predictive level.
Asunto(s)
ADN/química , Modelos Moleculares , Desnaturalización de Ácido Nucleico , TermodinámicaRESUMEN
Electrospun biodegradable polymers have emerged as promising materials for their applications in several fields, including biomedicine and food industry. For this reason, the susceptibility of these materials to be colonized by different pathogens is a critical issue for public health, and their study can provide future knowledge to develop new strategies against bacterial infections. In this work, the ability of three pathogenic bacterial species ( Pseudomonas aeruginosa, Acinetobacter baumannii, and Listeria monocytogenes) to adhere and form biofilm in electrospun polycaprolactone (PCL) microfibrous meshes was investigated. Bacterial attachment was analyzed in meshes with different microstructure, and comparisons with other materials (borosilicate glass and electrospun polylactic acid (PLA)) fibers were assessed. Analysis included colony forming unit (CFU) counts, scanning electron microscopy (SEM), and crystal violet (CV) staining. All the obtained data suggest that PCL meshes, regardless of their microstructure, are highly susceptible to be colonized by the pathogenic relevant bacteria used in this study, so a pretreatment or a functionalization with compounds that present some antimicrobial activity or antibiofilm properties is highly recommended before their application. Moreover, an experiment designed to simulate a chronic wound environment was used to demonstrate the ability of these meshes to detach biofilms from the substratum where they have developed, thus making them promising candidates to be used in wound cleaning and disinfection.
Asunto(s)
Poliésteres/química , Acinetobacter baumannii , Biopelículas , Listeria monocytogenes , Pseudomonas aeruginosaRESUMEN
The influence of molecular confinement on the melting transition of oriented Na-DNA fibers submerged in poly(ethylene glycol) (PEG) solutions has been studied. The PEG solution exerts an osmotic pressure on the fibers which, in turn, is related to the DNA intermolecular distance. Calorimetry measurements show that the melting temperature increases and the width of the transition decreases with decreasing intermolecular distance. Neutron scattering was used to monitor the integrated intensity and width of a Bragg peak from the B-form of DNA as a function of temperature. The data were quantitatively analyzed using the Peyrard-Bishop-Dauxois model. The experiments and analysis showed that long segments of double-stranded DNA persist until the last stages of melting and that there appears to be a substantial increase of the DNA dynamics as the melting temperature of the DNA is approached.
Asunto(s)
ADN/química , Temperatura de Transición , Animales , Rastreo Diferencial de Calorimetría , Neutrones , Polietilenglicoles , Salmón , Dispersión de Radiación , SolucionesRESUMEN
Despite numerous attempts, understanding the thermal denaturation of DNA is still a challenge due to the lack of structural data on the transition since standard experimental approaches to DNA melting are made in solution and do not provide spatial information. We report a measurement using neutron scattering from oriented DNA fibers to determine the size of the regions that stay in the double-helix conformation as the melting temperature is approached from below. A Bragg peak from the B form of DNA is observed as a function of temperature and its width and integrated intensity are measured. These results, complemented by a differential calorimetry study of the melting of B-DNA fibers as well as electrophoresis and optical observation data, are analyzed in terms of a one-dimensional mesoscopic model of DNA.
Asunto(s)
ADN Forma B/química , Temperatura de Transición , Animales , Modelos Moleculares , Difracción de Neutrones , Desnaturalización de Ácido NucleicoRESUMEN
The melting transition of DNA, whereby the strands of the double-helix structure completely separate at a certain temperature, has been characterized using neutron scattering. A Bragg peak from B-form fiber DNA has been measured as a function of temperature, and its widths and integrated intensities have been interpreted using the Peyrard-Bishop-Dauxois model with only one free parameter. The experiment is unique, as it gives spatial correlation along the molecule through the melting transition where other techniques cannot.
Asunto(s)
ADN/química , Difracción de Neutrones , Temperatura de Transición , Desnaturalización de Ácido NucleicoRESUMEN
DNA is not the static entity that structural pictures suggest. It has been longly known that it 'breathes' and fluctuates by local opening of the bases. Here we show that the effect of structural fluctuations, exhibited by AT-rich low stability regions present in some common transcription initiation regions, influences the properties of DNA in a distant range of at least 10 bp. This observation is confirmed by experiments on genuine gene promoter regions of DNA. The spatial correlations revealed by these experiments throw a new light on the physics of DNA and could have biological implications, for instance by contributing to the cooperative effects needed to assemble the molecular machinery that forms the transcription complex.
Asunto(s)
Secuencia Rica en At , ADN/química , Guanina/química , Regiones Promotoras Genéticas , Modelos Moleculares , TemperaturaRESUMEN
The ligand binding domain of the LDL receptor (LDLR) contains seven structurally homologous repeats. The fifth repeat (LR5) is considered to be the main module responsible for the binding of lipoproteins LDL and beta-VLDL. LR5, like the other homologous repeats, is around 40-residue long and contains three disulfide bonds and a conserved cluster of negatively charged residues surrounding a hexacoordinated calcium ion. The calcium coordinating cage is formed by the backbone oxygens of W193 and D198, and side-chain atoms of D196, D200, D206, and E207. The functionality of LDLR is closely associated with the presence of calcium. Magnesium ions are to some extent similar to calcium ions. However, they appear to be involved in different physiological events and their concentrations in extracellular and intracellular compartments are regulated by different mechanisms. Whether magnesium ions can play a role in the complex cycle of LDLR internalization and recycling is not known. We report here a detailed study of the interaction between LR5 and these two cations combining ITC, emission fluorescence, high resolution NMR, and MD simulations, at extracellular and endosomal pHs. Our results indicate that the conformational stability and internal dynamics of LR5 are strongly modulated by the specific bound cation. It appears that the difference in binding affinity for these cations is somewhat compensated by their different concentrations in late LDL-associated endosomes. While the mildly acidic and calcium-depleted environment in late endosomes has been proposed to contribute significantly to LDL release, the presence of magnesium might assist in efficient LDLR recycling. Proteins 2010. (c) 2009 Wiley-Liss, Inc.
Asunto(s)
Calcio/metabolismo , Magnesio/metabolismo , Receptores de LDL/metabolismo , Calorimetría , Concentración de Iones de Hidrógeno , Espectroscopía de Resonancia Magnética , Simulación de Dinámica Molecular , Unión Proteica , TermodinámicaRESUMEN
The ability of the telomeric DNA-binding protein, TRF2, to stimulate t-loop formation while preventing t-loop deletion is believed to be crucial to maintain telomere integrity in mammals. However, little is known on the molecular mechanisms behind these properties of TRF2. In this report, we show that TRF2 greatly increases the rate of Holliday junction (HJ) formation and blocks the cleavage by various types of HJ resolving activities, including the newly identified human GEN1 protein. By using potassium permanganate probing and differential scanning calorimetry, we reveal that the basic domain of TRF2 induces structural changes to the junction. We propose that TRF2 contributes to t-loop stabilisation by stimulating HJ formation and by preventing resolvase cleavage. These findings provide novel insights into the interplay between telomere protection and homologous recombination and suggest a general model in which TRF2 maintains telomere integrity by controlling the turnover of HJ at t-loops and at regressed replication forks.
Asunto(s)
ADN Cruciforme/metabolismo , Telómero/metabolismo , Proteína 2 de Unión a Repeticiones Teloméricas/metabolismo , Bacterias/enzimología , Emparejamiento Base , Secuencia de Bases , Bioensayo , Histidina/metabolismo , Resolvasas de Unión Holliday/metabolismo , Humanos , Datos de Secuencia Molecular , Permanganato de Potasio/farmacología , Unión Proteica/efectos de los fármacos , Estructura Terciaria de Proteína , Recombinasas/metabolismo , Saccharomyces cerevisiae/enzimología , Proteína 2 de Unión a Repeticiones Teloméricas/químicaRESUMEN
Flavodoxins, noncovalent complexes between apoflavodoxins and flavin mononucleotide (FMN), are useful models to investigate the mechanism of protein/flavin recognition. In this respect, the only available crystal structure of an apoflavodoxin (that from Anabaena) showed a closed isoalloxazine pocket and the presence of a bound phosphate ion, which posed many questions on the recognition mechanism and on the potential physiological role exerted by phosphate ions. To address these issues we report here the X-ray structure of the apoflavodoxin from the pathogen Helicobacter pylori. The protein naturally lacks one of the conserved aromatic residues that close the isoalloxazine pocket in Anabaena, and the structure has been determined in a medium lacking phosphate. In spite of these significant differences, the isoallozaxine pocket in H. pylori apoflavodoxin appears also closed and a chloride ion is bound at a native-like FMN phosphate site. It seems thus that it is a general characteristic of apoflavodoxins to display closed, non-native, isoalloxazine binding sites together with native-like, rather promiscuous, phosphate binding sites that can bear other available small anions present in solution. In this respect, both binding energy hot spots of the apoflavodoxin/FMN complex are initially unavailable to FMN binding and the specific spot for FMN recognition may depend on the dynamics of the two candidate regions. Molecular dynamics simulations show that the isoalloxazine binding loops are intrinsically flexible at physiological temperatures, thus facilitating the intercalation of the cofactor, and that their mobility is modulated by the anion bound at the phosphate site.
Asunto(s)
Apoproteínas/química , Mononucleótido de Flavina/química , Flavodoxina/química , Helicobacter pylori/química , Anabaena/química , Aniones/química , Apoproteínas/efectos de los fármacos , Sitios de Unión , Cristalografía por Rayos X , Flavodoxina/efectos de los fármacos , Modelos Moleculares , Análisis de Componente Principal , Unión Proteica , Conformación Proteica , Proteínas Recombinantes/químicaRESUMEN
It has been speculated that bubble formation of several base pairs due to thermal fluctuations is indicatory for biologically active sites. Recent evidence, based on experiments and molecular dynamics simulations using the Peyrard-Bishop-Dauxois model, seems to point in this direction. However, sufficiently large bubbles appear only seldom, which makes an accurate calculation difficult even for minimal models. In this Letter, we introduce a new method that is orders of magnitude faster than molecular dynamics. Using this method, we show that the present evidence is unsubstantiated.
Asunto(s)
ADN/química , ADN/genética , Modelos Químicos , Sitio de Iniciación de la Transcripción , Dependovirus/genética , Regiones Promotoras GenéticasRESUMEN
The theory of the liquid-glass transition is extended to describe the polymerization of RNA in a nucleotide-condensed state. In the glassy state the ribose subunits are joined by a 2'-5' or 3'-5' phosphodiester linkage to form the ribose-phosphate backbone similar to oligosaccharides and polysaccharides. The occurrence of the glass transition requires two conditions: (1) a supercooled state in a nucleotide-condensed state should exist below the temperature at which the whole RNA hydrolyzes; (2) the Gibbs free energy due to the Kauzmann entropy, which obeys a Curie law with a negative sign, must be larger than the height of the potential barrier for nucleotides to overcome to form the binding.
Asunto(s)
Modelos Biológicos , Nucleótidos/química , ARN/química , Nucleótidos/metabolismo , Transición de FaseRESUMEN
Proteins could be used to carry and deliver small compounds. As a tool for designing ligand binding sites in protein cores, a three-step virtual screening method is presented that has been optimised using existing data on T4 lysozyme complexes and tested in a newly engineered cavity in flavodoxin. The method can pinpoint, in large databases, ligands of specific protein cavities. In the first step, physico-chemical filters are used to screen the library and discard a majority of compounds. In the second step, a flexible, fast docking procedure is used to score and select a smaller number of compounds as potential binders. In the third step, a finer method is used to dock promising molecules of the hit list into the protein cavity, and an optimised free energy function allows discarding the few false positives by calculating the affinity of the modelled complexes. To demonstrate the portability of the method, several cavities have been designed and engineered in the flavodoxin from Anabaena PCC 7119, and the W66F/L44A double mutant has been selected as a suitable host protein. The NCI database has then been screened for potential binders, and the binding to the engineered cavity of five promising compounds and three tentative non-binders has been experimentally tested by thermal up-shift assays and spectroscopic titrations. The five tentative binders (some apolar and some polar), unlike the three tentative non-binders, are shown to bind to the host mutant and, importantly, not to bind to the wild type protein. The three-step virtual screening method developed can thus be used to identify ligands of buried protein cavities. We anticipate that the method could also be used, in a reverse manner, to identify natural or engineerable protein cavities for the hosting of ligands of interest.
Asunto(s)
Diseño de Fármacos , Flavodoxina/química , Muramidasa/química , Ingeniería de Proteínas , Bacteriófago T4/enzimología , Bacteriófago T4/genética , Simulación por Computador , Sistemas de Liberación de Medicamentos , Flavodoxina/metabolismo , Cinética , Ligandos , Muramidasa/genética , Muramidasa/metabolismo , Mutación , Biblioteca de Péptidos , Unión Proteica , Estructura Terciaria de Proteína , Temperatura , TermodinámicaRESUMEN
The contribution of a specific hydrogen bond in apoflavodoxin to protein stability is investigated by combining theory, experiment and simulation. Although hydrogen bonds are major determinants of protein structure and function, their contribution to protein stability is still unclear and widely debated. The best method so far devised to estimate the contribution of side-chain interactions to protein stability is double mutant cycle analysis, but the interaction energies so derived are not identical to incremental binding energies (the energies quantifying net contributions of two interacting groups to protein stability). Here we introduce double-deletion analysis of 'isolated' residue pairs as a means to precisely quantify incremental binding. The method is exemplified by studying a surface-exposed hydrogen bond in a model protein (Asp96/Asn128 in apoflavodoxin). Combined substitution of these residues by alanines slightly destabilizes the protein due to a decrease in hydrophobic surface burial. Subtraction of this effect, however, clearly indicates that the hydrogen-bonded groups in fact destabilize the native conformation. In addition, molecular dynamics simulations and classic double mutant cycle analysis explain quantitatively that, due to frustration, the hydrogen bond must form in the native structure because when the two groups get approximated upon folding their binding becomes favorable. We would like to remark that 1), this is the first time the contribution of a specific hydrogen bond to protein stability has been measured by experiment; and 2), more hydrogen bonds need to be analyzed to draw general conclusions on protein hydrogen bond energetics. To that end, the double-deletion method should be of help.