[Transverse characteristics of normodivergent patients in different sagittal skeletal patterns].

PURPOSE: This study aimed to measure and analyze the transverse indicators of normodivergent patients with different sagittal skeletal malocclusions, to explore the transverse characteristics of different sagittal skeletal malocclusions. METHODS: Lateral cephalograms and CBCT of 90 normodivergent patients with skeletal Class Ⅰ, Ⅱ and Ⅲ in their permanent dentition were collected. Dolphin software was applied to measure the widths of the basal bone, alveolar bone, dental arch and buccolingual inclination angle of the corresponding teeth in the maxillary and mandibular canine, premolar and molar areas. SPSS 22.0 software package was applied for statistical analysis of the data. RESULTS: The widths of the mandibular basal bone in canine, premolar and molar areas of skeletal Class Ⅲ were (27.15±2.74), (39.30±2.82) and (59.97±2.93) mm, respectively. The widths of the mandibular alveolar bone of skeletal Class Ⅲ were (25.38±1.78), (34.51±2.28) and (47.72±2.73) mm, respectively. The dental arch widths of the maxillary premolar and mandibular canine areas of skeletal Class Ⅲ were (48.70±2.35) and (30.69±2.31)mm, respectively. The above data of skeletal Class Ⅲ were significantly larger than those of skeletal Class Ⅰ and Ⅱ(P＜0.01). The dental arch widths of the maxillary canine, maxillary molar and mandibular molar areas of skeletal Class Ⅲ were (38.88±1.90), (59.51±3.40) and (56.01±2.86)mm, respectively, which were significantly larger than those of skeletal Class Ⅱ(P＜0.05). The maxillomandibular width difference of basal bone in the canine, premolar and molar areas of skeletal Class Ⅲ were (4.69±2.84), (2.31±2.39) and (3.27±2.05) mm, respectively, which were significantly less than that of skeletal Class Ⅰ and Ⅱ(P＜0.01). Compared with skeletal Class Ⅰ, the maxillary canines and first molars of skeletal Class Ⅱ had larger lingual inclination level, while the maxillary first premolars and first molars of skeletal Class Ⅲ had larger buccal inclination level, the mandibular canines and the mandibular first premolars of skeletal Class Ⅲ had larger lingual inclination level(P＜0.01). CONCLUSIONS: For normodivergent patients, the width of the mandibular base bone, alveolar bone, and maxillary and mandibular dental arch in skeletal Class Ⅲ is the widest, which is more likely to have width discrepancy in basal bone. In skeletal Class Ⅲ, the maxillary teeth are buccally inclined, and the mandibular teeth are ingually inclined. In skeletal Class Ⅱ, the maxillary teeth are lingually inclined, and the mandibular teeth are compensatory upright.

Evolving ω-amine transaminase AtATA guided by substrate-enzyme binding free energy for enhancing activity and stability against non-natural substrates.

In the field of chiral amine synthesis, ω-amine transaminase (ω-ATA) is one of the most established enzymes capable of asymmetric amination under optimal conditions. However, the applicability of ω-ATA toward more non-natural complex molecules remains limited due to its low transamination activity, thermostability, and narrow substrate scope. Here, by employing a combined approach of computational virtual screening strategy and combinatorial active-site saturation test/iterative saturation mutagenesis strategy, we have constructed the best variant M14C3-V5 (M14C3-V62A-V116S-E117I-L118I-V147F) with improved ω-ATA from Aspergillus terreus (AtATA) activity and thermostability toward non-natural substrate 1-acetylnaphthalene, which is the ketone precursor for producing the intermediate (R)-(+)-1-(1-naphthyl)ethylamine [(R)-NEA] of cinacalcet hydrochloride, showing activity enhancement of up to 3.4-fold compared to parent enzyme M14C3 (AtATA-F115L-M150C-H210N-M280C-V149A-L182F-L187F). The computational tools YASARA, Discovery Studio, Amber, and FoldX were applied for predicting mutation hotspots based on substrate-enzyme binding free energies and to show the possible mechanism with features related to AtATA structure, catalytic activity, and stability in silico analyses. M14C3-V5 achieved 71.8% conversion toward 50 mM 1-acetylnaphthalene in a 50 mL preparative-scale reaction for preparing (R)-NEA. Moreover, M14C3-V5 expanded the substrate scope toward aromatic ketone compounds. The generated virtual screening strategy based on the changes in binding free energies has successfully predicted the AtATA activity toward 1-acetylnaphthalene and related substrates. Together with experimental data, these approaches can serve as a gateway to explore desirable performances, expand enzyme-substrate scope, and accelerate biocatalysis.IMPORTANCEChiral amine is a crucial compound with many valuable applications. Their asymmetric synthesis employing ω-amine transaminases (ω-ATAs) is considered an attractive method. However, most ω-ATAs exhibit low activity and stability toward various non-natural substrates, which limits their industrial application. In this work, protein engineering strategy and computer-aided design are performed to evolve the activity and stability of ω-ATA from Aspergillus terreus toward non-natural substrates. After five rounds of mutations, the best variant, M14C3-V5, is obtained, showing better catalytic efficiency toward 1-acetylnaphthalene and higher thermostability than the original enzyme, M14C3. The robust combinational variant acquired displayed significant application value for pushing the asymmetric synthesis of aromatic chiral amines to a higher level.

Stereoselective synthesis of (R)-(+)-1-(1-naphthyl)ethylamine by ω-amine transaminase immobilized on amino modified multi-walled carbon nanotubes and biocatalyst recycling.

Immobilized enzymes exhibit favorable advantages in biocatalysis, such as high operation stability, feasible reusability, and improved organic solvents tolerance. Herein, an immobilized ω-amine transaminase AtATA@MWCNTs-NH2 is successfully prepared using amino modified multi-walled carbon nanotubes as carrier and glutaraldehyde as crosslinker. Under the optimum immobilization conditions, the activity recovery is 78.7%. Compared with purified enzyme AtATA, AtATA@MWCNTs-NH2 possesses superior stability, even in harsh conditions (e.g., high temperature, acidic or alkali environment, and different kind of organic solvents). To simplify the separation and extraction of products, we choose methanol (10%, v/v) as the cosolvent, replacing DMSO (20%, v/v) in our previous work, for the catalytic reaction of AtATA@MWCNTs-NH2. AtATA@MWCNTs-NH2 can be used for stereoselective synthesis (R)-(+)- 1(1-naphthyl)ethylamine ((R)-NEA) for 15 cycles, with the e.e.p (enantiomeric excess) > 99.5%. The catalytic process of AtATA@MWCNTs-NH2 achieves cycle production of (R)-NEA using methanol as cosolvent.

Theoretical investigation into the solvent effect on the thermal decomposition of RDX in tetrahydrofuran, acetone, toluene, and benzene.

In order to clarify the solvent effect on the thermal decomposition of explosive, the N-NO2 trigger-bond strengths and ring strains of RDX (cyclotrimethylenetrinitramine) in its H-bonded complexes with solvent molecules (i.e., tetrahydrofuran, acetone, toluene, and benzene), and the activation energies of the intermolecular hydrogen exchanges between the solvent molecules and C3H8O2N4 or CH4O2N2, as the model molecule of RDX, were investigated by the BHandHLYP, B3LYP, MP2(full), and M06-2X methods with the 6-311 + + G(2df,2p) basis set, accompanied by a comparison with the calculations by the integral equation formalism polarized continuum model. The solvent effects ignore the ring strain while strengthening the N-NO2 bond, leading to a possible decreased sensitivity, as is opposite to the experimental results. However, the activation energies are in the order of C3H8O2N4/CH4O2N2∙∙∙acetone < C3H8O2N4/CH4O2N2∙∙∙THF < C3H8O2N4/CH4O2N2∙∙∙toluene < C3H8O2N4/CH4O2N2∙∙∙benzene < C3H8O2N4/CH4O2N2, suggesting that the order of the critical explosion temperatures might be RDX∙∙∙acetone < RDX∙∙∙THF < RDX∙∙∙toluene < RDX∙∙∙benzene < RDX, as is roughly consistent with the experimental results. Therefore, the intermolecular hydrogen exchange with the HONO elimination is a possible mechanism of the solvent effect on the initial thermal decomposition of RDX. The solvent effect on the sensitivity is analyzed by the surface electrostatic potentials.