Benchmarking of X-Ray Fluorescence Microscopy with Ion Beam Implanted Samples Showing Detection Sensitivity of Hundreds of Atoms.

Single impurities in insulators are now often used for quantum sensors and single photon sources, while nanoscale semiconductor doping features are being constructed for electrical contacts in quantum technology devices, implying that new methods for sensitive, non-destructive imaging of single- or few-atom structures are needed. X-ray fluorescence (XRF) can provide nanoscale imaging with chemical specificity, and features comprising as few as 100 000 atoms have been detected without any need for specialized or destructive sample preparation. Presently, the ultimate limits of sensitivity of XRF are unknown - here, gallium dopants in silicon are investigated using a high brilliance, synchrotron source collimated to a small spot. It is demonstrated that with a single-pixel integration time of 1 s, the sensitivity is sufficient to identify a single isolated feature of only 3000 Ga impurities (a mass of just 350 zg). With increased integration (25 s), 650 impurities can be detected. The results are quantified using a calibration sample consisting of precisely controlled numbers of implanted atoms in nanometer-sized structures. The results show that such features can now be mapped quantitatively when calibration samples are used, and suggest that, in the near future, planned upgrades to XRF facilities might achieve single-atom sensitivity.

Single-Atom Control of Arsenic Incorporation in Silicon for High-Yield Artificial Lattice Fabrication.

Artificial lattices constructed from individual dopant atoms within a semiconductor crystal hold promise to provide novel materials with tailored electronic, magnetic, and optical properties. These custom-engineered lattices are anticipated to enable new, fundamental discoveries in condensed matter physics and lead to the creation of new semiconductor technologies including analog quantum simulators and universal solid-state quantum computers. This work reports precise and repeatable, substitutional incorporation of single arsenic atoms into a silicon lattice. A combination of scanning tunneling microscopy hydrogen resist lithography and a detailed statistical exploration of the chemistry of arsine on the hydrogen-terminated silicon (001) surface are employed to show that single arsenic dopants can be deterministically placed within four silicon lattice sites and incorporated with 97 ± 2% yield. These findings bring closer to the ultimate frontier in semiconductor technology: the deterministic assembly of atomically precise dopant and qubit arrays at arbitrarily large scales.

EUV-induced hydrogen desorption as a step towards large-scale silicon quantum device patterning.

Atomically precise hydrogen desorption lithography using scanning tunnelling microscopy (STM) has enabled the development of single-atom, quantum-electronic devices on a laboratory scale. Scaling up this technology to mass-produce these devices requires bridging the gap between the precision of STM and the processes used in next-generation semiconductor manufacturing. Here, we demonstrate the ability to remove hydrogen from a monohydride Si(001):H surface using extreme ultraviolet (EUV) light. We quantify the desorption characteristics using various techniques, including STM, X-ray photoelectron spectroscopy (XPS), and photoemission electron microscopy (XPEEM). Our results show that desorption is induced by secondary electrons from valence band excitations, consistent with an exactly solvable non-linear differential equation and compatible with the current 13.5 nm (~92 eV) EUV standard for photolithography; the data imply useful exposure times of order minutes for the 300 W sources characteristic of EUV infrastructure. This is an important step towards the EUV patterning of silicon surfaces without traditional resists, by offering the possibility for parallel processing in the fabrication of classical and quantum devices through deterministic doping.

Adsorption and Thermal Decomposition of Triphenyl Bismuth on Silicon (001).

We investigate the adsorption and thermal decomposition of triphenyl bismuth (TPB) on the silicon (001) surface using atomic-resolution scanning tunneling microscopy, synchrotron-based X-ray photoelectron spectroscopy, and density functional theory calculations. Our results show that the adsorption of TPB at room temperature creates both bismuth-silicon and phenyl-silicon bonds. Annealing above room temperature leads to increased chemical interactions between the phenyl groups and the silicon surface, followed by phenyl detachment and bismuth subsurface migration. The thermal decomposition of the carbon fragments leads to the formation of silicon carbide at the surface. This chemical understanding of the process allows for controlled bismuth introduction into the near surface of silicon and opens pathways for ultra-shallow doping approaches.

Momentum-Space Imaging of Ultra-Thin Electron Liquids in δ-Doped Silicon.

Two-dimensional dopant layers (δ-layers) in semiconductors provide the high-mobility electron liquids (2DELs) needed for nanoscale quantum-electronic devices. Key parameters such as carrier densities, effective masses, and confinement thicknesses for 2DELs have traditionally been extracted from quantum magnetotransport. In principle, the parameters are immediately readable from the one-electron spectral function that can be measured by angle-resolved photoemission spectroscopy (ARPES). Here, buried 2DEL δ-layers in silicon are measured with soft X-ray (SX) ARPES to obtain detailed information about their filled conduction bands and extract device-relevant properties. This study takes advantage of the larger probing depth and photon energy range of SX-ARPES relative to vacuum ultraviolet (VUV) ARPES to accurately measure the δ-layer electronic confinement. The measurements are made on ambient-exposed samples and yield extremely thin (< 1 nm) and dense (≈1014  cm-2 ) 2DELs. Critically, this method is used to show that δ-layers of arsenic exhibit better electronic confinement than δ-layers of phosphorus fabricated under identical conditions.

Resistless EUV lithography: Photon-induced oxide patterning on silicon.

In this work, we show the feasibility of extreme ultraviolet (EUV) patterning on an HF-treated silicon (100) surface in the absence of a photoresist. EUV lithography is the leading lithography technique in semiconductor manufacturing due to its high resolution and throughput, but future progress in resolution can be hampered because of the inherent limitations of the resists. We show that EUV photons can induce surface reactions on a partially hydrogen-terminated silicon surface and assist the growth of an oxide layer, which serves as an etch mask. This mechanism is different from the hydrogen desorption in scanning tunneling microscopy-based lithography. We achieve silicon dioxide/silicon gratings with 75-nanometer half-pitch and 31-nanometer height, demonstrating the efficacy of the method and the feasibility of patterning with EUV lithography without the use of a photoresist. Further development of the resistless EUV lithography method can be a viable approach to nanometer-scale lithography by overcoming the inherent resolution and roughness limitations of photoresist materials.

Room Temperature Incorporation of Arsenic Atoms into the Germanium (001) Surface.

Germanium has emerged as an exceptionally promising material for spintronics and quantum information applications, with significant fundamental advantages over silicon. However, efforts to create atomic-scale devices using donor atoms as qubits have largely focused on phosphorus in silicon. Positioning phosphorus in silicon with atomic-scale precision requires a thermal incorporation anneal, but the low success rate for this step has been shown to be a fundamental limitation prohibiting the scale-up to large-scale devices. Here, we present a comprehensive study of arsine (AsH3 ) on the germanium (001) surface. We show that, unlike any previously studied dopant precursor on silicon or germanium, arsenic atoms fully incorporate into substitutional surface lattice sites at room temperature. Our results pave the way for the next generation of atomic-scale donor devices combining the superior electronic properties of germanium with the enhanced properties of arsine/germanium chemistry that promises scale-up to large numbers of deterministically placed qubits.

In operando charge transport imaging of atomically thin dopant nanostructures in silicon.

Novel approaches to materials design, fabrication processes and device architectures have accelerated next-generation electronics component production, pushing device dimensions down to the nano- and atomic-scale. For device metrology methods to keep up with these developments, they should not only measure the relevant electrical parameters at these length-scales, but ideally do so during active operation of the device. Here, we demonstrate such a capability using the full functionality of an advanced scanning microwave/scanning capacitance/kelvin probe atomic force microscope to inspect the charge transport and performance of an atomically thin buried phosphorus wire device during electrical operation. By interrogation of the contact potential, carrier density and transport properties, we demonstrate the capability to distinguish between the different material components and device imperfections, and assess their contributions to the overall electric characteristics of the device in operando. Our experimental methodology will facilitate rapid feedback for the fabrication of patterned nanoscale dopant device components in silicon, now important for the emerging field of silicon quantum information technology. More generally, the versatile setup, with its advanced inspection capabilities, delivers a comprehensive method to determine the performance of nanoscale devices while they function, in a broad range of material systems.

Atomic-Scale Patterning of Arsenic in Silicon by Scanning Tunneling Microscopy.

Over the past two decades, prototype devices for future classical and quantum computing technologies have been fabricated by using scanning tunneling microscopy and hydrogen resist lithography to position phosphorus atoms in silicon with atomic-scale precision. Despite these successes, phosphine remains the only donor precursor molecule to have been demonstrated as compatible with the hydrogen resist lithography technique. The potential benefits of atomic-scale placement of alternative dopant species have, until now, remained unexplored. In this work, we demonstrate the successful fabrication of atomic-scale structures of arsenic-in-silicon. Using a scanning tunneling microscope tip, we pattern a monolayer hydrogen mask to selectively place arsenic atoms on the Si(001) surface using arsine as the precursor molecule. We fully elucidate the surface chemistry and reaction pathways of arsine on Si(001), revealing significant differences to phosphine. We explain how these differences result in enhanced surface immobilization and in-plane confinement of arsenic compared to phosphorus, and a dose-rate independent arsenic saturation density of 0.24 ± 0.04 monolayers. We demonstrate the successful encapsulation of arsenic delta-layers using silicon molecular beam epitaxy, and find electrical characteristics that are competitive with equivalent structures fabricated with phosphorus. Arsenic delta-layers are also found to offer confinement as good as similarly prepared phosphorus layers, while still retaining >80% carrier activation and sheet resistances of <2 kΩ/square. These excellent characteristics of arsenic represent opportunities to enhance existing capabilities of atomic-scale fabrication of dopant structures in silicon, and may be important for three-dimensional devices, where vertical control of the position of device components is critical.

Nondestructive imaging of atomically thin nanostructures buried in silicon.

It is now possible to create atomically thin regions of dopant atoms in silicon patterned with lateral dimensions ranging from the atomic scale (angstroms) to micrometers. These structures are building blocks of quantum devices for physics research and they are likely also to serve as key components of devices for next-generation classical and quantum information processing. Until now, the characteristics of buried dopant nanostructures could only be inferred from destructive techniques and/or the performance of the final electronic device; this severely limits engineering and manufacture of real-world devices based on atomic-scale lithography. Here, we use scanning microwave microscopy (SMM) to image and electronically characterize three-dimensional phosphorus nanostructures fabricated via scanning tunneling microscope-based lithography. The SMM measurements, which are completely nondestructive and sensitive to as few as 1900 to 4200 densely packed P atoms 4 to 15 nm below a silicon surface, yield electrical and geometric properties in agreement with those obtained from electrical transport and secondary ion mass spectroscopy for unpatterned phosphorus δ layers containing ~1013 P atoms. The imaging resolution was 37 ± 1 nm in lateral and 4 ± 1 nm in vertical directions, both values depending on SMM tip size and depth of dopant layers. In addition, finite element modeling indicates that resolution can be substantially improved using further optimized tips and microwave gradient detection. Our results on three-dimensional dopant structures reveal reduced carrier mobility for shallow dopant layers and suggest that SMM could aid the development of fabrication processes for surface code quantum computers.

Channels of oxygen diffusion in single crystal rubrene revealed.

Electronic devices made from organic materials have the potential to support a more ecologically friendly and affordable future. However, the ability to fabricate devices with well-defined and reproducible electrical and optical properties is hindered by the sensitivity to the presence of chemical impurities. Oxygen in particular is an impurity that can trap electrons and modify conductive properties of some organic materials. Until now the 3-dimensional profiling of oxygen species in organic semiconductors has been elusive and the effect of oxygen remains disputed. In this study we map out high-spatial resolution 3-dimensional distributions of oxygen inclusions near the surface of single crystal rubrene, using Time of Flight Secondary Ion Mass Spectroscopy (ToF-SIMS). Channels of diffused oxygen are found extending from uniform oxygen inclusion layers at the surface. These channels extend to depths in excess of 1.8 µm and act as an entry point for oxygen to diffuse along the ab-plane of the crystal with at least some of the diffused oxygen molecularly binding to rubrene. Our investigation of surfaces at different stages of evolution reveals the extent of oxygen inclusion, which affects rubrene's optical and transport properties, and is consequently of importance for the reliability and longevity of devices.

Investigating individual arsenic dopant atoms in silicon using low-temperature scanning tunnelling microscopy.

We study subsurface arsenic dopants in a hydrogen-terminated Si(001) sample at 77 K, using scanning tunnelling microscopy and spectroscopy. We observe a number of different dopant-related features that fall into two classes, which we call As1 and As2. When imaged in occupied states, the As1 features appear as anisotropic protrusions superimposed on the silicon surface topography and have maximum intensities lying along particular crystallographic orientations. In empty-state images the features all exhibit long-range circular protrusions. The images are consistent with buried dopants that are in the electrically neutral (D0) charge state when imaged in filled states, but become positively charged (D+) through electrostatic ionization when imaged under empty-state conditions, similar to previous observations of acceptors in GaAs. Density functional theory calculations predict that As dopants in the third layer of the sample induce two states lying just below the conduction-band edge, which hybridize with the surface structure creating features with the surface symmetry consistent with our STM images. The As2 features have the surprising characteristic of appearing as a protrusion in filled-state images and an isotropic depression in empty-state images, suggesting they are negatively charged at all biases. We discuss the possible origins of this feature.

Revealing surface oxidation on the organic semi-conducting single crystal rubrene with time of flight secondary ion mass spectroscopy.

To address the question of surface oxidation in organic electronics the chemical composition at the surface of single crystalline rubrene is spatially profiled and analyzed using Time of Flight - Secondary Ion Mass Spectroscopy (ToF-SIMS). It is seen that a uniform oxide (C42H28O) covers the surface while there is an increased concentration of peroxide (C42H28O2) located at crystallographic defects. By analyzing the effects of different primary ions, temperature and sputtering agents the technique of ToF-SIMS is developed as a valuable tool for the study of chemical composition variance both at and below the surface of organic single crystals. The primary ion beams C60(3+) and Bi3(+) are found to be most appropriate for mass spectroscopy and spatial profiling respectively. Depth profiling of the material is successfully undertaken maintaining the molecular integrity to a depth of ~5 µm using an Ar cluster ion source as the sputtering agent.

Site-dependent ambipolar charge states induced by group V atoms in a silicon surface.

We report that solitary bismuth and antimony atoms, incorporated at Si(111) surfaces, induce either positive or negative charge states depending on the site of the surface reconstruction in which they are located. This is in stark contrast to the hydrogenic donors formed by group V atoms in silicon bulk crystal and therefore has strong implications for the design and fabrication of future highly scaled electronic devices. Using scanning tunnelling microscopy (STM) and density functional theory (DFT) we determine the reconstructions formed by different group V atoms in the Si(111)2 × 1 surface. Based on these reconstructions a model is presented that explains the polarity as well as the location of the observed charges in the surface. Using locally resolved scanning tunnelling spectroscopy we are furthermore able to map out the spatial extent over which a donor atom influences the unoccupied surface and bulk electronic states near the Fermi-level. The results presented here therefore not only show that a dopant atom can induce both positive and negative charges but also reveal the nature of the local electronic structure in the region of the silicon surface where an individual donor atom is present.

Phosphine dissociation and diffusion on Si(001) observed at the atomic scale.

A detailed atomic-resolution scanning tunneling microscopy (STM) and density functional theory study of the adsorption, dissociation, and surface diffusion of phosphine (PH(3)) on Si(001) is presented. Adsorbate coverages from approximately 0.01 monolayer to saturation are investigated, and adsorption is performed at room temperature and 120 K. It is shown that PH(3) dissociates upon adsorption to Si(001) at room temperature to produce both PH(2) + H and PH + 2H. These appear in atomic-resolution STM images as features asymmetric-about and centered-upon the dimer rows, respectively. The ratio of PH(2) to PH is a function of both dose rate and temperature, and the dissociation of PH(2) to PH occurs on a time scale of minutes at room temperature. Time-resolved in situ STM observations of these adsorbates show the surface diffusion of PH(2) adsorbates (mediated by its lone pair electrons) and the dissociation of PH(2) to PH. The surface diffusion of PH(2) results in the formation of hemihydride dimers on low-dosed Si(001) surfaces and the ordering of PH molecules along dimer rows at saturation coverages. The observations presented here have important implications for the fabrication of atomic-scale P dopant structures in Si, and the methodology is applicable to other emerging areas of nanotechnology, such as molecular electronics, where unambiguous molecular identification using STM is necessary.