Assessing Gq-GPCR-induced human astrocyte reactivity using bioengineered neural organoids.

Astrocyte reactivity can directly modulate nervous system function and immune responses during disease and injury. However, the consequence of human astrocyte reactivity in response to specific contexts and within neural networks is obscure. Here, we devised a straightforward bioengineered neural organoid culture approach entailing transcription factor-driven direct differentiation of neurons and astrocytes from human pluripotent stem cells combined with genetically encoded tools for dual cell-selective activation. This strategy revealed that Gq-GPCR activation via chemogenetics in astrocytes promotes a rise in intracellular calcium followed by induction of immediate early genes and thrombospondin 1. However, astrocytes also undergo NF-κB nuclear translocation and secretion of inflammatory proteins, correlating with a decreased evoked firing rate of cocultured optogenetic neurons in suboptimal conditions, without overt neurotoxicity. Altogether, this study clarifies the intrinsic reactivity of human astrocytes in response to targeting GPCRs and delivers a bioengineered approach for organoid-based disease modeling and preclinical drug testing.

Humanized Biomimetic Nanovesicles for Neuron Targeting.

Nanovesicles (NVs) are emerging as innovative, theranostic tools for cargo delivery. Recently, surface engineering of NVs with membrane proteins from specific cell types has been shown to improve the biocompatibility of NVs and enable the integration of functional attributes. However, this type of biomimetic approach has not yet been explored using human neural cells for applications within the nervous system. Here, this paper optimizes and validates the scalable and reproducible production of two types of neuron-targeting NVs, each with a distinct lipid formulation backbone suited to potential therapeutic cargo, by integrating membrane proteins that are unbiasedly sourced from human pluripotent stem-cell-derived neurons. The results establish that both endogenous and genetically engineered cell-derived proteins effectively transfer to NVs without disruption of their physicochemical properties. NVs with neuron-derived membrane proteins exhibit enhanced neuronal association and uptake compared to bare NVs. Viability of 3D neural sphere cultures is not disrupted by treatment, which verifies the utility of organoid-based approaches as NV testing platforms. Finally, these results confirm cellular association and uptake of the biomimetic humanized NVs to neurons within rodent cranial nerves. In summary, the customizable NVs reported here enable next-generation functionalized theranostics aimed to promote neuroregeneration.

Mapping Astrocyte Transcriptional Signatures in Response to Neuroactive Compounds.

Astrocytes play central roles in normal brain function and are critical components of synaptic networks that oversee behavioral outputs. Despite their close affiliation with neurons, how neuronal-derived signals influence astrocyte function at the gene expression level remains poorly characterized, largely due to difficulties associated with dissecting neuron- versus astrocyte-specific effects. Here, we use an in vitro system of stem cell-derived astrocytes to identify gene expression profiles in astrocytes that are influenced by neurons and regulate astrocyte development. Furthermore, we show that neurotransmitters and neuromodulators induce distinct transcriptomic and chromatin accessibility changes in astrocytes that are unique to each of these neuroactive compounds. These findings are highlighted by the observation that noradrenaline has a more profound effect on transcriptional profiles of astrocytes compared to glutamate, gamma-aminobutyric acid (GABA), acetylcholine, and serotonin. This is demonstrated through enhanced noradrenaline-induced transcriptomic and chromatin accessibility changes in vitro and through enhanced calcium signaling in vivo. Taken together, our study reveals distinct transcriptomic and chromatin architecture signatures in astrocytes in response to neuronal-derived neuroactive compounds. Since astrocyte function is affected in all neurological disorders, this study provides a new entry point for exploring genetic mechanisms of astrocyte-neuron communication that may be dysregulated in disease.

Concepts toward directing human astroplasticity to promote neuroregeneration.

Astrocytes exhibit dynamic and complex reactions to various insults. Recently, investigations into the transitions that occur during cellular specification, differentiation, maturation, and disease responses have provided insights into understanding the mechanisms that underlie these altered states of reactivity and function. Here we summarize current concepts in how astrocyte state transitions, termed astroplasticity, are regulated, as well as how this affects neural circuit function through extracellular signaling. We postulate that a promising future approach toward enhancing functional repair after injury and disease would be to steer astrocytes away from an inhibitory response and toward one that is beneficial to neuroplasticity and neuroregeneration. Toward this goal, we discuss emerging biotechnological advancements, with a focus on human pluripotent stem cell bioengineering, which has high potential for effective manipulation and control of astroplasticity. Highlights include innovations in cellular transdifferentiation techniques, nanomedicine, organoid and three-dimensional (3D) spheroid microcircuit development, and the use of biomaterials to influence the extracellular environment. Current barriers and future applications are also summarized in order to augment the design of future preclinical trials aimed toward astrocyte-targeted neuroregeneration with a concept termed astrocellular therapeutics. Developmental Dynamics 248:21-33, 2019. © 2018 Wiley Periodicals, Inc.

Long-Term Cryopreservation and Revival of Tissue-Engineered Skeletal Muscle.

IMPACT STATEMENT: The ability to freeze, revive, and prolong the lifetime of tissue-engineered skeletal muscle without incurring any loss of function represents a significant advancement in the field of tissue engineering. Cryopreservation enables the efficient fabrication, storage, and shipment of these tissues. This in turn facilitates multidisciplinary collaboration between research groups, enabling advances in skeletal muscle regenerative medicine, organ-on-a-chip models of disease, drug testing, and soft robotics. Furthermore, the observation that freezing undifferentiated skeletal muscle enhances functional performance may motivate future studies developing stronger and more clinically relevant engineered muscle.

Synaptic Microcircuit Modeling with 3D Cocultures of Astrocytes and Neurons from Human Pluripotent Stem Cells.

A barrier to our understanding of how various cell types and signals contribute to synaptic circuit function is the lack of relevant models for studying the human brain. One emerging technology to address this issue is the use of three dimensional (3D) neural cell cultures, termed 'organoids' or 'spheroids', for long term preservation of intercellular interactions including extracellular adhesion molecules. However, these culture systems are time consuming and not systematically generated. Here, we detail a method to rapidly and consistently produce 3D cocultures of neurons and astrocytes from human pluripotent stem cells. First, pre-differentiated astrocytes and neuronal progenitors are dissociated and counted. Next, cells are combined in sphere-forming dishes with a Rho-Kinase inhibitor and at specific ratios to produce spheres of reproducible size. After several weeks of culture as floating spheres, cocultures ('asteroids') are finally sectioned for immunostaining or plated upon multielectrode arrays to measure synaptic density and strength. In general, it is expected that this protocol will yield 3D neural spheres that display mature cell-type restricted markers, form functional synapses, and exhibit spontaneous synaptic network burst activity. Together, this system permits drug screening and investigations into mechanisms of disease in a more suitable model compared to monolayer cultures.

3D printing for preoperative planning and surgical training: a review.

Surgeons typically rely on their past training and experiences as well as visual aids from medical imaging techniques such as magnetic resonance imaging (MRI) or computed tomography (CT) for the planning of surgical processes. Often, due to the anatomical complexity of the surgery site, two dimensional or virtual images are not sufficient to successfully convey the structural details. For such scenarios, a 3D printed model of the patient's anatomy enables personalized preoperative planning. This paper reviews critical aspects of 3D printing for preoperative planning and surgical training, starting with an overview of the process-flow and 3D printing techniques, followed by their applications spanning across multiple organ systems in the human body. State of the art in these technologies are described along with a discussion of current limitations and future opportunities.

Systematic Three-Dimensional Coculture Rapidly Recapitulates Interactions between Human Neurons and Astrocytes.

Human astrocytes network with neurons in dynamic ways that are still poorly defined. Our ability to model this relationship is hampered by the lack of relevant and convenient tools to recapitulate this complex interaction. To address this barrier, we have devised efficient coculture systems utilizing 3D organoid-like spheres, termed asteroids, containing pre-differentiated human pluripotent stem cell (hPSC)-derived astrocytes (hAstros) combined with neurons generated from hPSC-derived neural stem cells (hNeurons) or directly induced via Neurogenin 2 overexpression (iNeurons). Our systematic methods rapidly produce structurally complex hAstros and synapses in high-density coculture with iNeurons in precise numbers, allowing for improved studies of neural circuit function, disease modeling, and drug screening. We conclude that these bioengineered neural circuit model systems are reliable and scalable tools to accurately study aspects of human astrocyte-neuron functional properties while being easily accessible for cell-type-specific manipulations and observations.

Investigating the Life Expectancy and Proteolytic Degradation of Engineered Skeletal Muscle Biological Machines.

A combination of techniques from 3D printing, tissue engineering and biomaterials has yielded a new class of engineered biological robots that could be reliably controlled via applied signals. These machines are powered by a muscle strip composed of differentiated skeletal myofibers in a matrix of natural proteins, including fibrin, that provide physical support and cues to the cells as an engineered basement membrane. However, maintaining consistent results becomes challenging when sustaining a living system in vitro. Skeletal muscle must be preserved in a differentiated state and the system is subject to degradation by proteolytic enzymes that can break down its mechanical integrity. Here we examine the life expectancy, breakdown, and device failure of engineered skeletal muscle bio-bots as a result of degradation by three classes of proteases: plasmin, cathepsin L, and matrix metalloproteinases (MMP-2 and MMP-9). We also demonstrate the use of gelatin zymography to determine the effects of differentiation and inhibitor concentration on protease expression. With this knowledge, we are poised to design the next generation of complex biological machines with controllable function, specific life expectancy and greater consistency. These results could also prove useful for the study of disease-specific models, treatments of myopathies, and other tissue engineering applications.

Damage, Healing, and Remodeling in Optogenetic Skeletal Muscle Bioactuators.

A deeper understanding of biological materials and the design principles that govern them, combined with the enabling technology of 3D printing, has given rise to the idea of "building with biology." Using these materials and tools, bio-hybrid robots or bio-bots, which adaptively sense and respond to their environment, can be manufactured. Skeletal muscle bioactuators are developed to power these bio-bots, and an approach is presented to make them dynamically responsive to changing environmental loads and robustly resilient to induced damage. Specifically, since the predominant cause of skeletal muscle loss of function is mechanical damage, the underlying mechanisms of damage are investigated in vitro, and an in vivo inspired healing strategy is developed to counteract this damage. The protocol that is developed yields complete recovery of healthy tissue functionality within two days of damage, setting the stage for a more robust, resilient, and adaptive bioactuator technology than previously demonstrated. Understanding and exploiting the adaptive response behaviors inherent within biological systems in this manner is a crucial step forward in designing bio-hybrid machines that are broadly applicable to grand engineering challenges.

A modular approach to the design, fabrication, and characterization of muscle-powered biological machines.

Biological machines consisting of cells and biomaterials have the potential to dynamically sense, process, respond, and adapt to environmental signals in real time. As a first step toward the realization of such machines, which will require biological actuators that can generate force and perform mechanical work, we have developed a method of manufacturing modular skeletal muscle actuators that can generate up to 1.7 mN (3.2 kPa) of passive tension force and 300 µN (0.56 kPa) of active tension force in response to external stimulation. Such millimeter-scale biological actuators can be coupled to a wide variety of 3D-printed skeletons to power complex output behaviors such as controllable locomotion. This article provides a comprehensive protocol for forward engineering of biological actuators and 3D-printed skeletons for any design application. 3D printing of the injection molds and skeletons requires 3 h, seeding the muscle actuators takes 2 h, and differentiating the muscle takes 7 d.

A 3D-printed platform for modular neuromuscular motor units.

A complex and functional living cellular system requires the interaction of one or more cell types to perform specific tasks, such as sensing, processing, or force production. Modular and flexible platforms for fabrication of such multi-cellular modules and their characterization have been lacking. Here, we present a modular cellular system, made up of multi-layered tissue rings containing integrated skeletal muscle and motor neurons (MNs) embedded in an extracellular matrix. The MNs were differentiated from mouse embryonic stem cells through the formation of embryoid bodies (EBs), which are spherical aggregations of cells grown in a suspension culture. The EBs were integrated into a tissue ring with skeletal muscle, which was differentiated in parallel, to create a co-culture amenable to both cell types. The multi-layered rings were then sequentially placed on a stationary three-dimensional-printed hydrogel structure resembling an anatomical muscle-tendon-bone organization. We demonstrate that the site-specific innervation of a group of muscle fibers in the multi-layered tissue rings allows for muscle contraction via chemical stimulation of MNs with glutamate, a major excitatory neurotransmitter in the mammalian nervous system, with the frequency of contraction increasing with glutamate concentration. The addition of tubocurarine chloride (a nicotinic receptor antagonist) halted the contractions, indicating that muscle contraction was MN induced. With a bio-fabricated system permitting controllable mechanical and geometric attributes in a range of length scales, our novel engineered cellular system can be utilized for easier integration of other modular "building blocks" in living cellular and biological machines.

3D Printed Stem-Cell-Laden, Microchanneled Hydrogel Patch for the Enhanced Release of Cell-Secreting Factors and Treatment of Myocardial Infarctions.

Over the past several years, biomaterials loaded with mesenchymal stem cells (MSCs) have increasingly been used to reduce the myocardial fate of postinfarction collagen deposition and scar tissue formation. Despite successful gains, therapeutic efficacy has remained limited because of restricted transport of cell-secreting factors at the site of implantation. We hypothesized that an MSC-laden hydrogel patch with multiple microchannels would retain transplanted cells on target tissue and support transport of cell-secreting factors into tissue. By doing so, the gel patch will improve the therapeutic potential of the cells and minimize the degradation of myocardial tissue postinfarction. To examine this hypothesis, a stereolithographic apparatus (SLA) was used to introduce microchannels of controlled diameters (e.g., 500 and 1000 µm) during in situ cross-linking reaction of poly(ethylene glycol)dimethacrylate solution suspended with cells. Placement of the MSC-laden, microchanneled gel patch on the occluded left coronary artery in a murine model showed significant improvement in the ejection fraction, fractional shortening, and stroke volume, compared with gel patches without MSCs and MSC-laden gel patches without microchannels. In particular, the microchannels significantly reduced the number of cells required to recover cardiac function, while minimizing cardiac remodeling. In sum, the microchanneled gel patch would provide a means to prevent abnormal fibrosis resulting from acute ischemic injury.

Optogenetic skeletal muscle-powered adaptive biological machines.

Complex biological systems sense, process, and respond to their surroundings in real time. The ability of such systems to adapt their behavioral response to suit a range of dynamic environmental signals motivates the use of biological materials for other engineering applications. As a step toward forward engineering biological machines (bio-bots) capable of nonnatural functional behaviors, we created a modular light-controlled skeletal muscle-powered bioactuator that can generate up to 300 µN (0.56 kPa) of active tension force in response to a noninvasive optical stimulus. When coupled to a 3D printed flexible bio-bot skeleton, these actuators drive directional locomotion (310 µm/s or 1.3 body lengths/min) and 2D rotational steering (2°/s) in a precisely targeted and controllable manner. The muscle actuators dynamically adapt to their surroundings by adjusting performance in response to "exercise" training stimuli. This demonstration sets the stage for developing multicellular bio-integrated machines and systems for a range of applications.

Three-dimensionally printed biological machines powered by skeletal muscle.

Combining biological components, such as cells and tissues, with soft robotics can enable the fabrication of biological machines with the ability to sense, process signals, and produce force. An intuitive demonstration of a biological machine is one that can produce motion in response to controllable external signaling. Whereas cardiac cell-driven biological actuators have been demonstrated, the requirements of these machines to respond to stimuli and exhibit controlled movement merit the use of skeletal muscle, the primary generator of actuation in animals, as a contractile power source. Here, we report the development of 3D printed hydrogel "bio-bots" with an asymmetric physical design and powered by the actuation of an engineered mammalian skeletal muscle strip to result in net locomotion of the bio-bot. Geometric design and material properties of the hydrogel bio-bots were optimized using stereolithographic 3D printing, and the effect of collagen I and fibrin extracellular matrix proteins and insulin-like growth factor 1 on the force production of engineered skeletal muscle was characterized. Electrical stimulation triggered contraction of cells in the muscle strip and net locomotion of the bio-bot with a maximum velocity of ∼ 156 µm s(-1), which is over 1.5 body lengths per min. Modeling and simulation were used to understand both the effect of different design parameters on the bio-bot and the mechanism of motion. This demonstration advances the goal of realizing forward-engineered integrated cellular machines and systems, which can have a myriad array of applications in drug screening, programmable tissue engineering, drug delivery, and biomimetic machine design.

Enabling microscale and nanoscale approaches for bioengineered cardiac tissue.

In this issue of ACS Nano, Shin et al. present their finding that the addition of carbon nanotubes (CNT) in gelatin methacrylate (GelMA) results in improved functionality of bioengineered cardiac tissue. These CNT-GelMA hybrid materials demonstrate cardiac tissue with enhanced electrophysiological performance; improved mechanical integrity; better cell adhesion, viability, uniformity, and organization; increased beating rate and lowered excitation threshold; and protective effects against cardio-inhibitory and cardio-toxic drugs. In this Perspective, we outline recent progress in cardiac tissue engineering and prospects for future development. Bioengineered cardiac tissues can be used to build "heart-on-a-chip" devices for drug safety and efficacy testing, fabricate bioactuators for biointegrated robotics and reverse-engineered life forms, treat abnormal cardiac rhythms, and perhaps one day cure heart disease with tissue and organ transplants.