RESUMEN
Environmental pollution is a serious threat to human health and the natural environment, and it has aroused widespread concern. One of the most effective processes in the removal of pollutants from wastewater is the Fenton reaction. This process is based on the production of highly reactive â¢OH radicals due to the rapid reaction between Iron ions and hydrogen peroxide under acidic conditions. The hydroxyl radical has a high oxidation potential of E°(â¢OH/H2O) = 2.8 V/SHE at acidic pH, so they are extremely reactive and non-selective oxidizing agent towards organic contaminants in wastewater. In order to avoid the drawbacks of a standard Fenton reaction, a photo Fenton reaction has been tested working at neutral pH in water in the removal of refractory pollutants. For the first time, a heterogeneous system was experimented, impregnating porous metakaolin-based geopolymers, obtained by using hydrogen peroxide and vegetable oil in different ratios, as foaming agents, with iron working as photocatalyst. The dirty wastewater as scrubber water (SCRW) and liquid fraction of digestate (LFD) were tested obtaining 40-90% abatement of Total Carbon Content.
Asunto(s)
Contaminantes Ambientales , Contaminantes Químicos del Agua , Humanos , Aguas Residuales , Peróxido de Hidrógeno/química , Hierro/química , Agua , Oxidación-Reducción , Contaminantes Químicos del Agua/análisisRESUMEN
Agronomic practices and the winemaking process lead to the production of considerable quantities of waste and by-products. These are often considered waste with negative effects on environmental sustainability. However, vine shoots and grape stalks can be reused, representing a potential source of xylo-oligosaccharides and polyphenols. In this context, the purpose of this work was to obtain enriched extracts using three different autohydrolysis treatments with (i) H2O, (ii) H2O:EtOH, and (iii) H2O:Amberlyst. The obtained extracts were characterized by their xylo-oligosaccharide and polyphenol profiles using LC-MS techniques. The use of ethanol during autohydrolysis allowed for greater extraction of xylan-class compounds, especially in vine shoot samples, while an increase in antioxidant activity (128.04 and 425.66 µmol TE/g for ABTS and DPPH, respectively) and in total phenol content (90.92 mg GAE/g) was obtained for grape stalks.
Asunto(s)
Vitis , Vitis/química , Fenoles , Oligosacáridos/química , Polifenoles , Extractos Vegetales/química , Antioxidantes/farmacología , EtanolRESUMEN
The total amount of cellulose from paper, wood, food, and other human activity waste produced in the EU is in the order of 900 million tons per year. This resource represents a sizable opportunity to produce renewable chemicals and energy. This paper reports, unprecedently in the literature, the usage of four different urban wastes such as cigarette butts, sanitary pant diapers, newspapers, and soybean peels as cellulose fonts to produce valuable industrial intermediates such as levulinic acid (LA), 5-acetoxymethyl-2-furaldehyde (AMF), 5-(hydroxymethyl)furfural (HMF), and furfural. The process is accomplished by the hydrothermal treatment of cellulosic waste using both Brønsted and Lewis acid catalysts such as CH3COOH (2.5-5.7 M), H3PO4 (15%), and Sc(OTf)3 (20% w:w), thus obtaining HMF (22%), AMF (38%), LA (25-46%), and furfural (22%) with good selectivity and under relatively mild conditions (T = 200 °C, time = 2 h). These final products can be employed in several chemical sectors, for example, as solvents, fuels, and for new materials as a monomer precursor. The characterization of matrices was accomplished by FTIR and LCSM analyses, demonstrating the influence of morphology on reactivity. The low e-factor values and the easy scale up render this protocol suitable for industrial applications.
RESUMEN
Recycling of catalysts is often performed. Additive manufacturing (AM) received increasing attention in recent years in various fields such as engineering and medicine, among others. More recently, the fabrication of three-dimensional objects used as scaffolds in heterogeneous catalysis has shown innumerable advantages, such as easier handling and waste reduction, both leading to a reduction in times and costs. In this work, the fabrication and use of 3D-printed recyclable polylactic acid (PLA) scaffolds coated with an iron oxide active catalyst for Fenton reactions applied to aromatic model molecules, is presented. These molecules are representative of a wider class of intractable organic compounds, often present in industrial wastewater. The 3D-printed PLA-coated scaffolds were also tested using an industrial wastewater, determining the chemical oxygen demand (COD). The catalyst is characterized using electron microscopy coupled to elemental analysis (SEM/EDX) and thermogravimetry, demonstrating that coating leach is very limited, and it can be easily recovered and reused many times.
RESUMEN
A novel Pd-catalysed oxidative coupling between benzoic acids and vinylarenes or acrylates to furnish isocoumarins and phthalides is reported. The reaction proceeds smoothly in molten tetrabutylammonium acetate via a selective C-H bond activation, with very low percentage of ligand-free palladium acetate as the catalyst, under atmospheric pressure of oxygen. Sub-stoichiometric amount of copper acetate is also required as a reoxidant for the palladium.
Asunto(s)
Líquidos Iónicos , Paladio , Paladio/química , Isocumarinas/química , Catálisis , AcetatosRESUMEN
Photoreduction of CO2 with sunlight to produce solar fuels, also named artificial photosynthesis, is considered one of the most attractive strategies to face the challenge of reducing greenhouse gases and achieving climate neutrality. Following an approach in line with the principles of the circular economy, the low-cost catalytic system (1) based on an industrial by-product such as steel slag was assessed, which was properly modified with nanostructured palladium on its surface in order to make it capable of promoting the conversion of CO2 into methanol and hydrogen through a two-stage process of photoreduction and thermal conversion having formic acid as the intermediate. Notably, for the first time in the literature steel slag is used as photoreduction catalyst.
Asunto(s)
Hidrógeno , Metanol , Dióxido de Carbono , Fotosíntesis , Acero , AguaRESUMEN
Unprecedented in the literature, levulinic acid (LA), one of the top value-added intermediates of chemical industry, is obtained from cigarette butts as cellulose feedstock by means of a one-pot hydrothermal process carried out at 200 °C for 2 h and catalysed by phosphoric acid. The protocol avoids the use of more aggressive and toxic H2SO4 and HCl, that are generally employed on several cellulose sources (e.g. sludge paper), thus minimizing corrosion phenomena of plants. Neither chemical pre-treatment of butts nor specific purification procedure of LA are required. Notably, by simply modifying acid catalyst (e.g. using CH3COOH), another top value-added fine chemical such as 5-hydroxymethylfuraldehyde (HMF) is obtained, thus widening the scope of the method. Being cigarette filters a waste available in quantities of megatonnes per year, they represent an unlimited at no cost source of cellulose, thus enabling the up-scale to an industrial level of LA production.
RESUMEN
Curcumin (CM) is a natural polyphenol wellknown for its antioxidant and pharmaceutical properties, that can represent a renewable alternative to bisphenol A (BPA) for the synthesis of biobased polycarbonates (PC). In the presented strategy, preparation of the CMbased PC was coupled with chemical recycling of the fossilbased BPA polycarbonate (BPAPC) conducting a twosteps transpolymerization that replaces BPA monomer with CM or its tetrahydrogenated colorless product (THCM). In the first step of synthetic strategy, depolymerization of commercial BPAPC was carried out with phenol as nucleophile, according to our previous procedure based on zinc derivatives and ionic liquids as catalysts, thus producing quantitatively diphenyl carbonate (DPC) e BPA. In the second step, DPC underwent a melt transesterification with CM or THCM monomers affording the corresponding biobased polycarbonates, CMPC and THCMPC, respectively. THCM was prepared by reducing natural bisphenol with cyclohexene as a hydrogen donor and characterized by 1H-NMR and MS techniques. Polymerization reactions were monitored by infrared spectroscopy and average molecular weights and dispersity of the two biobased polymers THCMPC and CMPC were determined by means of gel permeation chromatography (GPC). Optical properties of the prepared polymers were also measured.
RESUMEN
Biowaxes synthesized from vegetable fatty acids are an alternative to petrochemical paraffins. A simple way of access to these compounds involves Fisher-type esterification of long-chain acids and alcohols under acidic conditions, but long reaction times and harsh conditions are commonly required. In this study, for the first time in the literature, biowax esters are prepared under flow conditions cutting dramatically both reaction times (from 12 h to 30 min) and temperature conditions, with respect to batch procedures (from 90-120 °C to 55 °C). This approach brings substantial improvements to the biowax synthesis process from an economic and environmental point of view, thus making the method up-scalable to the industrial level.
RESUMEN
The successful isolation and characterization of a dioxirane species in 1988 opened up one of the most attractive methods for the efficient oxidation of simple and/or structurally complex molecules. Dioxirane today rank among the most powerful tools in organic chemistry, with numerous applications in commercially important processes. They were quickly recognized as efficient oxygen transfer agents, especially for epoxidations and for a wide range of O-insertion reactions into C-H bonds. Dioxirane possess catalytic activity and appear as highly (chemo-, regio-, and stereo-) selective oxidants, despite their reactivity under mild and strictly neutral conditions being controlled by a combination of steric and electronic factors. In this review, we discuss some of the most recent and significant developments in the selective homogeneous and heterogeneous oxyfunctionalization of non-activated C-H bonds in hydrocarbons of natural and non-natural targets by using isolated dioxirane or, more generally, by using the ketones (i.e., the dioxirane precursors) as organocatalysts.
RESUMEN
The hydrogenolysis of mono- and dinuclear PdII hydroxides was investigated both experimentally and computationally. It was found that the dinuclear µ-hydroxide complexes {[(PCNR )Pd]2 (µ-OH)}(OTf) (PCNH =1-[3-[(di-tert-butylphosphino)methyl]phenyl]-1H-pyrazole; PCNMe =1-[3-[(di-tert-butylphosphino)methyl]phenyl]-5-methyl-1H-pyrazole) react with H2 to form the analogous dinuclear hydride species {[(PCNR )Pd]2 (µ-H)}(OTf). The dinuclear µ-hydride complexes were fully characterized, and are rare examples of structurally characterized unsupported singly bridged µ-H PdII dimers. The {[(PCNMe )Pd]2 (µ-OH)}(OTf) hydrogenolysis mechanism was investigated through experiments and computations. The hydrogenolysis of the mononuclear complex (PCNH )Pd-OH resulted in a mixed ligand dinuclear species [(PCNH )Pd](µ-H)[(PCC)Pd] (PCC=a dianionic version of PCNH bound through phosphorus P, aryl C, and pyrazole C atoms) generated from initial ligand "rollover" C-H activation. Further exposure to H2 yields the bisphosphine Pd0 complex Pd[(H)PCNH ]2 . When the ligand was protected at the pyrazole 5-position in the (PCNMe )Pd-OH complex, no hydride formed under the same conditions; the reaction proceeded directly to the bisphosphine Pd0 complex Pd[(H)PCNMe ]2 . Reaction mechanisms for the hydrogenolysis of the monomeric and dimeric hydroxides are proposed.
RESUMEN
Methyl(trifluoromethyl)dioxirane (TFDO) can be used for the oxyfunctionalization of SWCNTs filled with NaI and LuCl3 under mild conditions. The chosen metal halides are of interest for theranostics, both for imaging and therapy when in their radioactive form. The applied functionalization methodology does not require metal catalyst, preserves the integrity of the nanotubes during treatment, avoiding the release of the filling material. In this way, epoxidation can be considered as an efficient methodology for the functionalization of carbon nanocapsules, where the traditional harsh oxidation conditions by acids are not applicable.
RESUMEN
Silicon nanowires (SiNWs) decorated by pulsed laser ablation with gold or copper nanoparticles (labeled as AuNPs@SiNWs and CuNPs@SiNWs) were investigated for their catalytic properties. Results demonstrated high catalytic performances in the Caryl-N couplings and subsequent carbonylations for gold and copper catalysts, respectively, that have no precedents in the literature. The excellent activity, attested by the very high turn over number (TON) values, was due both to the uniform coverage along the NW length and to the absence of the chemical shell surrounding the metal nanoparticles (MeNPs). A high recyclability was also observed and can be ascribed to the strong covalent interaction at the Me-Si interface by virtue of metal "silicides" formation.
RESUMEN
Anatase (TiO2) and multiwalled carbon nanotubes bearing polyethylenimine (PEI) anchored on their surface were hybridized in different proportions according to a sol-gel method. The resulting nanocomposites (TiO2@PEI-MWCNTs), characterized by BET, XRD, XPS, SEM, and UV techniques, were found efficient catalysts for CO2 photoreduction into formic and acetic acids in water suspension and under visible light irradiation. PEI-grafted nanotubes co-catalysts are believed to act as CO2 activators by forming a carbamate intermediate allowing to accomplish the first example in the literature of polyamines/nanotubes/TiO2 mediated CO2 photoreduction to carboxylic acids.
RESUMEN
Low pressure plasma was used for preparing heterogeneous organocatalysts 2-(A)-(C) suitable for dioxirane-mediated epoxidations. Heterogenization was accomplished by adsorption of the methyl perfluoroheptyl ketone (2) on fluorinated supports (A)-(C) deriving from the treatment of commercial C8-silica gel in low pressure plasma fed with fluorocarbons. Catalyst 2-(C) proved to be the most efficient one, promoting epoxidation of an array of alkenes, including unsaturated fatty esters like methyl oleate (10) and the triglyceride soybean oil (11), with the cheap potassium peroxymonosulfate KHSO5 (caroate) as a green oxidant. Notably, the perfluorinated matrix gives rise to the activation of caroate, generating singlet oxygen. Materials were characterized by infrared Attenuated Total Reflectance spectroscopy (ATR-FTIR), X-ray Photoelectron Spectroscopy (XPS ) and Emission Scanning Electron Microscope (FESEM).
Asunto(s)
Halogenación , Cetonas/química , Gases em Plasma , Presión , Gel de Sílice/química , Catálisis , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Polyurethane-resin doming is currently one of the fastest growing markets in the field of industrial graphics and product identification. Semi-rigid bio-based polyurethanes were prepared deriving from soybean oil as a valuable alternative to fossil materials for digital doming and applied to digital mosaic technology. Bio-resins produced can favorably compete with the analogous fossil polymers, giving high-quality surface coatings (ascertained by SEM analyses). In addition, polyurethane synthesis was accomplished by using a mercury- and tin-free catalyst (the commercially available zinc derivative K22) bringing significant benefits in terms of cost efficiency and eco-sustainability.
RESUMEN
An innovative and eco-friendly one-pot synthesis of bio-based polyurethanes is proposed via the epoxy-ring opening of epoxidized soybean oil (ESO) with methanol, followed by the reaction of methoxy bio-polyols intermediates with 2,6-tolyl-diisocyanate (TDI). Both synthetic steps, methanolysis and polyurethane linkage formation, are promoted by a unique catalyst, molybdenum(VI) dichloride dioxide (MoCl2O2), which makes this procedure an efficient, cost-effective, and environmentally safer method amenable to industrial scale-up.
Asunto(s)
Técnicas de Química Sintética , Poliuretanos/síntesis química , Aceite de Soja/química , Catálisis , Oxidación-Reducción , Espectroscopía de Protones por Resonancia MagnéticaRESUMEN
Dioxiranes are powerful oxidants that can act via two different mechanisms: 1)â homolytic (H abstraction and oxygen rebound) and 2)â heterolytic (electrophilic oxidation). So far, it has been reported that the nature of the substrate dictates the reaction mode independently from the dioxirane employed. Herein, we report an unprecedented case in which the nature of the dioxirane rules the oxidation chemoselectivity. In particular, a switch from C-H to N-H oxidation is observed in the oxidation of lactams moving from dimethyl dioxirane (DDO) to methyl(trifluoromethyl)dioxirane (TFDO). A physical organic chemistry study, which combines the oxidation with two other dioxiranes methyl(fluoromethyl)dioxirane, MFDO, and methyl(difluoromethyl)dioxirane, DFDO, with computational studies, points to a diverse ability of the dioxiranes to either stabilize the homo or the heterolytic pathway.
Asunto(s)
Compuestos Epoxi/química , Lactamas/química , Oxidantes/química , Halogenación , Metilación , Oxidación-Reducción , TermodinámicaRESUMEN
A valuable analog of the K(+)-ionophore valinomycin (1), bearing a pentafluorophenyl ester moiety, has been obtained by selective reaction between the tertiary hydroxyl moiety of analog 2 (available from valinomycin hydroxylation) and the isocyanate group of pentafluorophenyl N-carbonyl glycinate (3) catalyzed by bis(N,N-dimethylformamide)dichlorodioxomolybdenum(VI). LC-HRMS studies show that analog 4 undergoes easy derivatization under mild conditions by reaction with OH- and NH2-containing compounds. Mitochondrial depolarization assays suggest that 4 acts as a K(+)-ionophore, provided that the glycine carboxyl group is appropriately masked.
Asunto(s)
Hidrocarburos Fluorados/química , Valinomicina/síntesis química , Ésteres , Glicina/análogos & derivados , Glicina/química , Ionóforos/química , Estructura Molecular , Potasio/química , Valinomicina/químicaRESUMEN
Composite materials prepared by loading polycrystalline TiO2 powders with lipophilic highly branched Cu(II)- and metal-free phthalocyanines or porphyrins, which have been used in the past as photocatalysts for photodegradative processes, have been successfully tested for the efficient photoreduction of carbon dioxide in aqueous suspension affording significant amounts of formic acid. The results indicated that the presence of the sensitizers is beneficial for the photoactivity, confirming the important role of Cu(II) co-ordinated in the middle of the macrocycles. A comparison between Cu(II) phthalocyanines and Cu(II) porphyrins indicated that the Cu(II)- phthalocyanine sensitizer was more efficient in the photoreduction of CO2 to formic acid, probably due to its favorable reduction potential.