Antinociceptive effect of cyclic and linear diterpenoids as new atypical agonists of κ-opioid receptors obtained from four species of the Baccharis genus, and vehiculated in nanometric niosomes.

New natural analgesic compounds that act in KORs are important alternatives for potential therapeutical use in medicine. In this work, we report and compare here the antinociceptive activity displayed by cyclic and linear diterpenes, obtained from the genus Baccharis. The antinociceptive activities determined were relatively strong, in comparison whit morphine. The antinociceptive mechanism of action was made through naloxone administration (a non-selective antagonist of opioid receptors). The more active compounds were vehiculized successfully in niosomes at nanometric scale. The observed antinociceptive activity for Bartemidiolide oxide (BARTO), obtain from Baccharis artemisioides, was greater than Flabeloic acid dimer (DACD), the first compound isolated from Baccharis flabellata that was reported possessing antinociceptive effects. We also conducted docking calculations and molecular dynamics simulations, which suggested that the newly identified diterpenes might share the molecular action mechanism reported for Salvinorin A (SalA). Molecular simulations have allowed us to appreciate some subtle differences between molecular interactions of these ligands stabilizing their respective complexes; such information might be useful for designing and searching for new inhibitors of KORs.

Lignin-Based Catalysts for C-C Bond-Forming Reactions.

Carbon-carbon (C-C) bond formation is the key reaction in organic synthesis to construct the carbon framework of organic molecules. The continuous shift of science and technology toward eco-friendly and sustainable resources and processes has stimulated the development of catalytic processes for C-C bond formation based on the use of renewable resources. In this context, and among other biopolymer-based materials, lignin has attracted scientific attention in the field of catalysis during the last decade, either through its acid form or as a support for metal ions and metal nanoparticles that drive the catalytic activity. Its heterogeneous nature, as well as its facile preparation and low cost, provide competitive advantages over other homogeneous catalysts. In this review, we have summarized a variety of C-C formation reactions, such as condensations, Michael additions of indoles, and Pd-mediated cross-coupling reactions that were successfully carried out in the presence of lignin-based catalysts. These examples also involve the successful recovery and reuse of the catalyst after the reaction.

CuAu bimetallic plasmonic-enhanced catalysts supported on alginate biohydrogels.

We describe the synthesis, characterization and catalytic properties of a series of hybrid materials composed of inorganic plasmonic mono- and bimetallic nanoparticles supported on organic bio-based hydrogel beads. The bimetallic materials showed a localized surface plasmon resonance in the visible region, with a maximum light absorption correlated to the metal composition of the alloyed systems. Thermogravimetric analysis revealed a total water content near to 90 % w/w, which was in good agreement with the free-volume calculated from µCT scan reconstruction of lyophilized samples. Catalytic essays for the reduction of 4-nitrophenol demonstrated that alginate beads loaded with bimetallic nanoparticles exhibit a 5.4-fold higher apparent kinetic constant (kapp) than its monometallic counterparts. Additionally, taking advantage of the plasmonic properties given by the nanoparticles is that the materials were tested as photocatalysts. The activity of the catalysts was enhanced by near 2.2 times higher in comparison with its performance in dark conditions.

Porous chitosan-based nanocomposites containing gold nanoparticles. Increasing the catalytic performance through film porosity.

The preparation of porous and non-porous chitosan thin-films containing gold nanoparticles was carried out, aiming to evaluate the effect of porosity on their catalytic response using the p-nitrophenol reduction as model reaction. To achieve this, both types of samples were decorated with gold nanoparticles having similar characteristics in terms of amount, size and shape, which were synthesized following a two-step adsorption-reduction process. The results demonstrated that the presence of porosity generates a considerable enhancement of the catalytic property. This behavior is reflected in higher kinetic constant and conversion values, along with a better recyclability after consecutive cycles. The inclusion of porosity in nanocomposites afforded kobs values 7.5 times higher than the non-porous material, as well as conversion values as high as 80 % in <20 min. On the other hand, as an additional experiment, a porous sample prepared with half the amount of gold also exhibited a better performance than the non-porous catalyst, revealing that the porosity allowed to decrease the amount of catalytic metal used and still exhibiting kobs values 5.9 times higher than the non-porous specimen. These studies demonstrate that there is an important synergistic support-nanostructure relationship, which strongly influences the performance of the nanomaterial.

Highly Efficient Production of Heteroarene Phosphonates by Dichromatic Photoredox Catalysis.

A new strategy to achieve efficient aerobic phosphorylation of five-membered heteraroenes with excellent yields using dichromatic photoredox catalysis in a gel-based nanoreactor is described here. The procedure involves visible aerobic irradiation (cold white LEDs) of a mixture containing the heteroarene halide, trisubstituted phospite, N,N-diisopropylethylamine (DIPEA) as sacrificial agent, and catalytic amounts of 9,10-dicyanoanthracene (DCA) in the presence of an adequate gelator, which permits a faster process than at the homogeneous phase. The methodology, which operates by a consecutive photoinduced electron transfer (ConPET) mechanism, has been successfully applied to the straightforward and clean synthesis of a number of different heteroarene (furan, thiophene, selenophene, pyrrole, oxazole, or thioxazole) phosphonates, extending to the late-stage phosphonylation of the anticoagulant rivaroxaban. Strategically, employment of cold white light is critical since it provides both selective wavelengths for exciting first DCA (blue region) and subsequently its corresponding radical anion DCA•- (green region). The resultant strongly reducing excited agent DCA•-* is capable of even activate five-membered heteroarene halides (Br, Cl) with high reduction potentials (∼-2.7 V) to effect the C(sp2)-P bond formation. Spectroscopic and thermodynamic studies have supported the proposed reaction mechanism. Interestingly, the rate of product formation has been clearly enhanced in gel media because reactants can be presumably localized not only in the solvent pools but also through to the fibers of the viscoelastic gel network. This has been confirmed by field-emission scanning electron microscopy images where a marked densification of the network has been observed, modifying its fibrillary morphology. Finally, rheological measurements have shown the resistance of the gel network to the incorporation of the reactants and the formation of the desired products.

A pH-Triggered Polymer Degradation or Drug Delivery System by Light-Mediated Cis/Trans Isomerization of o-Hydroxy Cinnamates.

A new methodology for the pH-triggered degradation of polymers or for the release of drugs under visible light irradiation based on the cyclization of ortho-hydroxy-cinnamates (oHC) to coumarins is described. The key oHC structural motif can be readily incorporated into the rational design of novel photocleavable polymers via click chemistry. This main-chain moiety undergoes a fast photocleavage when irradiated with 455 nm light provided that a suitable base is added. A series of polyethylene glycol-alt-ortho-hydroxy cinnamate (polyethylene glycol (PEG)n -alt-oHC)-based polymers are synthesized and the time-dependent visible-light initiated cleavage of the photoactive monomer and polymer is investigated in solution by a variety of spectroscopic and chromatographic techniques. The photo-degradation behavior of the water-soluble poly(PEG2000 -alt-oHC) is investigated within a broad pH range (pH = 2.1-11.8), demonstrating fast degradation at pH 11.8, while the stability of the polymer is greatly enhanced at pH 2.1. Moreover, the neat polymer shows long-term stability under daylight conditions, thus allowing its storage without special precautions. In addition, two water-soluble PEG-based drug-carrier molecules (mPEG2000 -oHC-benzhydrol/phenol) are synthesized and used for drug delivery studies, monitoring the process by UV-vis spectroscopy in an ON/OFF intermittent manner.

Graphene-based hybrid materials as promising scaffolds for peripheral nerve regeneration.

Peripheral nerve injury (PNI) is a serious clinical health problem caused by the damage of peripheral nerves which results in neurological deficits and permanent disability. There are several factors that may cause PNI such as localized damage (car accident, trauma, electrical injury) and outbreak of the systemic diseases (autoimmune or diabetes). While various diagnostic procedures including X-ray, magnetic resonance imaging (MRI), as well as other type of examinations such as electromyography or nerve conduction studies have been efficiently developed, a full recovery in patients with PNI is in many cases deficient or incomplete. This is the reason why additional therapeutic strategies should be explored to favor a complete rehabilitation in order to get appropriate nerve injury regeneration. The use of biomaterials acting as scaffolds opens an interesting approach in regenerative medicine and tissue engineering applications due to their ability to guide the growth of new tissues, adhesion and proliferation of cells including the expression of bioactive signals. This review discusses the preparation and therapeutic strategies describing in vitro and in vivo experiments using graphene-based materials in the context of PNI and their ability to promote nerve tissue regeneration.

Amphiphilic Polymer Co-Networks.

Amphiphilic Polymer Co-networks: Synthesis, Properties, Modelling and Applications is a new and very interesting book published by the Royal Society of Chemistry and edited by Prof. Costas S. Patrickios (University of Cyprus). Herein, a brief review of the most important features of the book and its contents is provided from a personal perspective.

Use of a pH-sensitive polymer in a microextraction and preconcentration method directly combined with high-performance liquid chromatography.

A pH-sensitive polymer based on the poly(styrene-alt-maleic anhydride) co-polymer serves as basis to develop a microextraction method (pH-HGME) in direct combination with high-performance liquid chromatography (HPLC) and fluorescence detection (FD) for the determination of seven organic compounds, including three polycyclic aromatic hydrocarbons (PAHs), three monohydroxylated PAHs and one alkylphenol, in urine. The method bases on the structural modification of the pH-sensitive polymer in the aqueous sample at a high pH value, followed by the formation and insolubilization of a hydrogel containing the preconcentrated analytes by decreasing the pH, and the direct injection of the hydrogel-rich phase in the HPLC-FD system. The optimization of the main variables permitted the selection of low amounts of aqueous sample (10 mL), which was mixed with 10 mg of co-polymer also present in a low volume (150 µL) of concentrated NaOH. The method further requires the addition of 200 µL of concentrated HCl, 3 min of stirring, and 15 min of centrifugation. This pH-HGME-HPLC-FD method presented low limits of detection, ranging from 0.001 µg L-1 to 0.09 µg L-1 in ultrapure water, average relative recoveries of 96.9% for the concentration level of 0.60 µg L-1, and enrichment factors between 1.50 and 17.7. The proposed method also exhibited high precision, with intermediate relative standard deviations lower than 16% for a concentration level of 0.60 µg L-1. The developed pH-HGME-HPLC-FD method performed adequately when analyzing two human urine samples provided by a non-smoker male and a smoker female, respectively. One of the target analytes (2-hydroxynaphthalene) was quantified in both samples using the standard addition method, with a predicted concentration of 7.3 ± 0.4 µg L-1 in the non-smoker male urine and 19.3 ± 0.6 µg L-1 in the smoker female urine.

Sulfonamide as amide isostere for fine-tuning the gelation properties of physical gels.

(S)-2-Stearamidopentanedioic acid (C18-Glu) is a known LMW gelator that forms supramolecular gels in a variety of solvents. In this work, we have carried out the isosteric substitution of the amide group by a sulfonamide moiety yielding the new isosteric gelator (S)-2-(octadecylsulfonamido)pentanedioic acid (Sulfo-Glu). The gelation ability and the key properties of the corresponding gels were compared in terms of gelation concentration, gel-to-sol transition temperature, mechanical properties, morphology, and gelation kinetics in several organic solvents and water. This comparison was also extended to (S)-2-(4-hexadecyl-1H-1,2,3-triazol-4-yl)pentanedioic acid (Click-Glu), which also constitutes an isostere of C18-Glu. The stabilizing interactions were explored through computational calculations. In general, Sulfo-Glu enabled the formation of non-toxic gels at lower concentrations, faster, and with higher thermal-mechanical stabilities than those obtained with the other isosteres in most solvents. Furthermore, the amide-sulfonamide isosteric substitution also influenced the morphology of the gel networks as well as the release rate of an embedded antibiotic (vancomycin) leading to antibacterial activity in vitro against Staphylococcus aureus.

Insulin-loaded mucoadhesive nanoparticles based on mucin-chitosan complexes for oral delivery and diabetes treatment.

In this study, insulin-loaded nanoparticles (NPs) were prepared via self-gelation method using chitosan and aqueous soluble snail mucin as natural polymers. Herein, mucins were ionically interacted with chitosan at different concentrations to obtained insulin-loaded NPs, labelled as A1 (1:1) (i.e., chitosan 2 % w/v + mucin 2 % w/v) and A2 (2:1) (chitosan 4 % w/v + mucin 2 % w/v), using poloxamer and poly vinyl alcohol as solid surfactant. Such formulation was selected to provide the necessary dynamics for the formation of the nanoparticles while maintaining the surface properties that will favor the encapsulation of insulin. Each system was characterized in terms of their particle size distribution, morphology, zeta potential, and polydispersity index. In vitro release of insulin was evaluated in acidic solution (pH 1.2) and phosphate buffer solution (pH 7.4), and the hypoglycaemic activity was evaluated in diabetes rats. The prepared insulin-loaded NPs displayed particles with relatively smooth surfaces and an average particle size of 479.6 and 504.1 nm for A1 and A2, respectively. Zeta potential and polydispersity index, ranged from 22.1 to 31.2 mV and 0.155-0.185, respectively. The encapsulating efficiency for the systems A1 and A2 were 88.6 and 92.5, respectively, and a self-sustained release of encapsulated insulin was observed for over a period of 8 h. In vivo studies revealed a pronounced hypoglycaemic effect in diabetic rats after peroral administration of the insulin-loaded NPs compared to the effect caused by free oral insulin solution. In addition, both the pharmacokinetic and toxicity results showed low plasma clearance of insulin and no signs of toxicity on the liver enzyme and cell viability, which suggested good biocompatibility of the NPs formulations. Overall, the formation of NPs of insulin with chitosan and snail mucin represents a potentially safe and promising approach to protect insulin and enhance its peroral delivery.

Alginate Hydrogels as Scaffolds and Delivery Systems to Repair the Damaged Spinal Cord.

Alginate (ALG) is a lineal hydrophilic polysaccharide present in brown algae cell walls, which turns into a gel state when hydrated. Gelation readily produces a series of three dimensional (3D) architectures like fibers, capillaries, and microspheres, used as biosensors and bio-actuators in a plethora of biomedical applications like drug delivery and wound healing. Hydrogels have made a great impact on regenerative medicine and tissue engineering because they are able to mimic the mechanical properties of natural tissues due to their high water content. Recent advances in neurosciences have led to promising strategies for repairing and/or regenerating the damaged nervous system. Spinal cord injury (SCI) is particularly challenging, owing to its devastating medical, human, and social consequences. Although effective therapies to repair the damaged spinal cord (SC) are still lacking, multiple pharmacological, genetic, and cell-based therapies are currently under study. In this framework, ALG hydrogels constitute a source of potential tools for the development of implants capable of promoting axonal growth and/or delivering cells or drugs at specific damaged sites, which may result in therapeutic strategies for SCI. In this mini-review, the current state of the art of ALG applications in neural tissues for repairing the damaged spinal cord is discussed.

5-(1H-1,2,3-Triazol-5-yl)isophthalic Acid: A Versatile Ligand for the Synthesis of New Supramolecular Metallogels.

The gelation ability of 5-(1H-1,2,3-triazol-5-yl)isophthalic acid (click-TIA) in the presence of different metal acetates has been studied in different solvents and ligand/metal ratios. This manuscript is focused on the metallogel obtained from the combination of click-TIA and copper(II) acetate, which has been used as a model system in terms of characterization and gelation studies. Sonication treatment of the initial mixture of compounds and the nature of the counter anion were found to be critical factors for the supramolecular assembly of the metal/click-TIA complexes and, hence, for the formation of stable and homogeneous metallogels. The gel materials have been characterized with a variety of techniques including infrared, rheology, UV-vis spectroscopy, powder X-ray diffraction, and scanning electron microscopy.

Expanding the limits of amide-triazole isosteric substitution in bisamide-based physical gels.

Gelation of organic solvents using N,N'-((1S,2S)-cyclohexane-1,2-diyl)didodecanamide (C12-Cyc) is driven by its self-assembly via antiparallel hydrogen bonds and van der Waals intermolecular interactions. In this work we carried out a dual isosteric substitution of the two amide groups with 1,2,3-triazole rings affording the corresponding isosteric gelator (click-C12-Cyc). A detailed comparative study in terms of the gelation ability and gel properties demonstrated that the 1,2,3-triazoles can take over all of the functions derived from the amide groups offering a versatile strategy for tuning the properties of the corresponding gels. This is not an obvious outcome because the directional amide groups in C12-Cyc constitute the source of the hydrogen bonds to build the 3D self-assembled network. Furthermore, theoretical calculations revealed that click-C12-Cyc can adopt a wide variety of interacting patterns, whose relative stability depends on the polarity of the environment, this is in good agreement with the experimental data obtained regarding its gelation ability. Other important features of click-C12-Cyc for potential practical applications are its non-cytotoxic character and its phase-selective gelation of water-oil mixtures.

Niosomes encapsulated in biohydrogels for tunable delivery of phytoalexin resveratrol.

A series of biohydrogels based on mixtures of kappa-carrageenan (κ-carrageenan, κ-C) and gelatin were evaluated as potential soft delivery vehicles for the encapsulation and subsequent release of non-ionic surfactant vesicles (niosomes) loaded with resveratrol (RSV). The niosomes were prepared using a mixture of amphiphilic lipids Tween 80 and Span 80 in water. The results showed that RSV-niosomes did not significantly affect the hydrogelation properties of the biopolymer mixture. Moreover, in vitro drug release experiments from biohydrogels containing RSV-niosomes were successfully carried out under simulated gastrointestinal conditions. The RSV-niosomal liberation profiles from hydrogels were fitted using first order kinetics, Higuchi, Korsmeyer-Peppas and Weibull drug release models, showing the prevalence of diffusion mechanisms in each case. In addition, the RSV release was easily tuned by adjusting the total concentration of κ-C : gelatin. Interestingly, the niosomal-hydrogel system was also found to prevent the trans-to-cis photoisomerization of RSV.

Recent Strategies in Resveratrol Delivery Systems.

Resveratrol, a natural polyphenolic stilbenoid widely found in grapes and wines, displays beneficial properties such as cardio-protective, antioxidant and anti-inflammatory activities. Trans-resveratrol (RSV) is the most bioactive and more abundant stereoisomer found in nature. Despite the positive properties of RSV, there are various factors that limit its effectiveness, including low aqueous solubility, low oral bioavailability and chemical instability. During the last years, an increasing number of strategies such as nano and micro encapsulation have been developed in order to overcome these limitations and enhance the use of RSV in nutritional and pharmaceutical applications. This Review summarizes the advances and main properties of several RSV carriers and delivery systems reported during the last 5 years.

Isomeric cationic ionenes as n-dopant agents of poly(3,4-ethylenedioxythiophene) for in situ gelation.

Three isomeric ionene polymers containing 1,4-diazabicyclo[2.2.2]octane (DABCO) and N,N'-(x-phenylene)dibenzamide (x = ortho-/meta-/para-) linkages have been used as dopant agents to produce n-doped poly(3,4-ethylenedioxythiophene) (PEDOT) electrodes by reducing already dedoped conducting polymer (CP) films. This work focuses on the influence of the ionene topology on both the properties of n-doped PEDOT:ionene electrodes and the success of the in situ thermal gelation of the ionene inside the CP matrix. The highest doping level is reached for the para-isomeric ionene-containing electrode, even though the content of ortho- and meta-topomers in the corresponding n-doped PEDOT:ionene electrodes is greater. Thus, many of the incorporated ionene units are not directly interacting with CP chains and, therefore, they do not play an active role as n-dopant agents but they are crucial for the in situ formation of the ionene hydrogels. The effect of the ionene topology is practically non-existent on properties such as the specific capacitance and wettability of PEDOT:ionene films, and it is small but non-negligible on the electrochemical and thermal stability. In contrast, the surface morphology, topography, and distribution of dopant molecules significantly depend on the ionene topology. In situ thermal gelation was successful in PEDOT films n-doped with the ortho- and para-topomers, even though this assembly process was much faster for the former than for the latter. The gelation considerably improved the mechanical response of the electropolymerized PEDOT film, which was practically non-existent before it. Molecular dynamics simulations prove that the strength and abundance of PEDOTionene specific interactions (i.e. π-π stacking, N-HS hydrogen bonds and both N+O and N+S interactions) are higher for the meta-isomeric ionene, for which the in situ gelation was not achieved, than for the ortho- and para-ones.

In situ preparation of film and hydrogel bio-nanocomposites of chitosan/fluorescein-copper with catalytic activity.

Copper nanoparticles were introduced into chitosan/fluorescein (Ch/f) film and hydrogel matrices by immersion of the respective matrix into an aqueous solution containing the precursor metallic salt and further reduction in aqueous medium at 75°C for 3h under nitrogen (N2) atmosphere. TGA was used to estimate the metallic content of Ch/f-Cu film and hydrogel nanocomposites. The prepared nanocomposites were proven to be effective as catalytic materials in the reduction of methylene blue (MB) employing N2H4 as reducing agent. In addition, rate constants of the reduction reaction using Ch/f-Cu film and hydrogel nanocomposites as catalysts were determined. The experimental results showed that the catalytic activity and order of reaction of the MB-N2H4 reduction system depended strongly on the type of nanocomposite used. Finally, the recyclability of the film and hydrogel nanocomposites as catalytic materials was also studied.

Paradigm Shift for Preparing Versatile M2+-Free Gels from Unmodified Sodium Alginate.

This manuscript describes a new route to prepare rapidly Ca2+-free hydrogels from unmodified sodium alginate by simply mixing with small organic molecules such as poly(carboxylic acid) compounds as cross-linker agents instead of classical divalent metal salts such as CaCl2. Dimethyl sulfoxide (DMSO) was also found to induce the rapid gelation of aqueous alginate solutions. The gelation process takes place at room temperature, and depending on the composition, gels with good thermal (90-100 °C) and mechanical properties compared to classical metal-containing analogs are obtained. DMSO-based gels showed remarkable self-supporting and thixotropic properties, which can be tuned by the biopolymer concentration. Furthermore, oxalic acid-based gels show superior elasticity than HCl, CaCl2 and DMSO-based gels. The possibility to prepare monoliths, beads, and films of these gels provide them with significant versatility. In particular, films made of alginate and oxalic acid show good potential as synergistic anticancer drug delivery carrier. Computational studies using both quantum mechanical and classical force-field methodologies reveal that hydrogen bonding networks between water and DMSO molecules located close to the alginate chains are responsible for the stability of DMSO-based gels. In contrast, the cohesion of oxalic acid-based gels is a consequence of the coexistence of multiple ionic associations involving oxalate, alginate, and Na+ counterions, which stabilize the system and keep all the interacting species grouped.

Interplaying anions in a supramolecular metallohydrogel to form metal organic frameworks.

The remarkable effect of anions on the transition from supramolecular gels to crystalline phases has been described. An amino acid-based metallohydrogel was transformed into different metal-organic frameworks through the selective picking of anions. The metallohydrogel and the resulting metal-organic frameworks (MOFs) were thoroughly characterized. The results demonstrated controlled access over the binding of a particular anion to selectively form a particular MOF.