Dynamic two-dimensional covalent organic frameworks.

Porous covalent organic frameworks (COFs) enable the realization of functional materials with molecular precision. Past research has typically focused on generating rigid frameworks where structural and optoelectronic properties are static. Here we report dynamic two-dimensional (2D) COFs that can open and close their pores upon uptake or removal of guests while retaining their crystalline long-range order. Constructing dynamic, yet crystalline and robust frameworks requires a well-controlled degree of flexibility. We have achieved this through a 'wine rack' design where rigid π-stacked columns of perylene diimides are interconnected by non-stacked, flexible bridges. The resulting COFs show stepwise phase transformations between their respective contracted-pore and open-pore conformations with up to 40% increase in unit-cell volume. This variable geometry provides a handle for introducing stimuli-responsive optoelectronic properties. We illustrate this by demonstrating switchable optical absorption and emission characteristics, which approximate 'null-aggregates' with monomer-like behaviour in the contracted COFs. This work provides a design strategy for dynamic 2D COFs that are potentially useful for realizing stimuli-responsive materials.

An electrically conducting 3D coronene-based metal-organic framework.

A novel cubic mesoporous metal-organic framework (MOF), consisting of hexahydroxy-cata-hexabenzocoronene (c-HBC) and FeIII ions is presented. The highly crystalline and porous MOF features broad optical absorption over the whole visible and near infrared spectral regions. An electrical conductivity of 10-4 S cm-1 was measured on a pressed pellet.

Size-Tunable Manganese-Doped Spheroidal CsPbCl3 Quantum Dots.

Manganese doping has been demonstrated as a versatile tool to tune the emission of CsPbCl3 nanocrystals (NCs). Although this has been demonstrated in nanocubes and nanoplatelets, strategies for doping Mn2+ in size-tunable, excitonic CsPbCl3 quantum dots (QDs) remain absent. In this work, we demonstrate the synthesis of size-tunable spheroidal CsPbCl3:Mn2+ QDs, which can be obtained by a water-hexane interfacial combined anion and cation exchange strategy starting from CsPbBr3 QDs. Interestingly, the QDs exhibit a fast 0.2 ms Mn2+ photoluminescence (PL) lifetime and an energy transfer (ET) time of approximately 100 ps from the excitonic state of the QD to the atomic state of the Mn2+ ion. The size dependence observation of the manganese PL efficiency and the slow ET rate suggest that Mn2+ mainly gets incorporated at the QD's surface, highlighting the importance of strategies chosen for the incorporation of Mn2+ into perovskite QDs.

Axial Growth Characteristics of Optically Active InGaAs Nanowire Heterostructures for Integrated Nanophotonic Devices.

III-V semiconductor nanowire (NW) heterostructures with axial InGaAs active regions hold large potential for diverse on-chip device applications, including site-selectively integrated quantum light sources, NW lasers with high material gain, as well as resonant tunneling diodes and avalanche photodiodes. Despite various promising efforts toward high-quality single or multiple axial InGaAs heterostacks using noncatalytic growth mechanisms, the important roles of facet-dependent shape evolution, crystal defects, and the applicability to more universal growth schemes have remained elusive. Here, we report the growth of optically active InGaAs axial NW heterostructures via completely catalyst-free, selective-area molecular beam epitaxy directly on silicon (Si) using GaAs(Sb) NW arrays as tunable, high-uniformity growth templates and highlight fundamental relationships between structural, morphological, and optical properties of the InGaAs region. Structural, compositional, and 3D-tomographic characterizations affirm the desired directional growth along the NW axis with no radial growth observed. Clearly distinct luminescence from the InGaAs active region is demonstrated, where tunable array-geometry parameters and In content up to 20% are further investigated. Based on the underlying twin-induced growth mode, we further describe the facet-dependent shape and interface evolution of the InGaAs segment and its direct correlation with emission energy.

Strong Dimensional and Structural Dependencies of Hot Carrier Effects in InGaAs Nanowires: Implications for Photovoltaic Solar Cells.

III-V nanowire structures are among the promising material systems with applications in hot carrier solar cells. These nanostructures can meet the requirements for such photovoltaic devices, i.e., the suppression of thermalization loss, an efficient hot carrier transport, and enhanced photoabsorption thanks to their unique one-dimensional (1D) geometry and density-of-states. Here, we investigate the effects of spatial confinement of photogenerated hot carriers in InGaAs-InAlAs core-shell nanowires, which presents an ideal class of hot carrier solar cell materials due to its suitable electronic properties. Using steady-state photoluminescence spectroscopy, our study reveals that by increasing the degree of spatial confinement and Auger recombination, the effects of hot carriers increase, which is in good agreement with theoretical modeling. However, for thin nanowires, the temperature of hot carriers decreases as the effects of crystal disorder increase. This observation is confirmed by probing the extent of the disorder-induced Urbach tail and linked to the presence of a higher density of stacking defects in the limit of thin nanowires. These findings expand our knowledge of hot carrier thermalization in nanowires, which can be applied for designing efficient 1D hot carrier absorbers for advanced-concept photovoltaic solar cells.

Oxide nanolitisation-induced melt iron extraction causes viscosity jumps and enhanced explosivity in silicic magma.

Explosivity in erupting volcanoes is controlled by the degassing dynamics and the viscosity of the ascending magma in the conduit. Magma crystallisation enhances both heterogeneous bubble nucleation and increases in magma bulk viscosity. Nanolite crystallisation has been suggested to enhance such processes too, but in a noticeably higher extent. Yet the precise causes of the resultant strong viscosity increase remain unclear. Here we report experimental results for rapid nanolite crystallisation in natural silicic magma and the extent of the subsequent viscosity increase. Nanolite-free and nanolite-bearing rhyolite magmas were subjected to heat treatments, where magmas crystallised or re-crystallised oxide nanolites depending on their initial state, showing an increase of one order of magnitude as oxide nanolites formed. We thus demonstrate that oxide nanolites crystallisation increases magma bulk viscosity mainly by increasing the viscosity of its melt phase due to the chemical extraction of iron, whereas the physical effect of particle suspension is minor, almost negligible. Importantly, we further observe that this increase is sufficient for driving magma fragmentation depending on magma degassing and ascent dynamics.

Iron-Gallic Acid Peptide Nanoparticles as a Versatile Platform for Cellular Delivery with Synergistic ROS Enhancement Effect.

Cytosolic delivery of peptides is of great interest owing to their biological functions, which could be utilized for therapeutic applications. However, their susceptibility to enzymatic degradation and multiple cellular barriers generally hinders their clinical application. Integration into nanoparticles, which can enhance the stability and membrane permeability of bioactive peptides, is a promising strategy to overcome extracellular and intracellular obstacles. Herein, we present a versatile platform for the cellular delivery of various cargo peptides by integration into metallo-peptidic coordination nanoparticles. Both termini of cargo peptides were conjugated with gallic acid (GA) to assemble GA-modified peptides into nanostructures upon coordination of Fe(III). Initial pre-complexation of Fe(III) by poly-(vinylpolypyrrolidon) (PVP) as a template favored the formation of nanoparticles, which are able to deliver the peptides into cells efficiently. Iron-gallic acid peptide nanoparticles (IGPNs) are stable in water and are supposed to generate reactive oxygen species (ROS) from endogenous H2O2 in cells via the Fenton reaction. The strategy was successfully applied to an exemplary set of peptide sequences varying in length (1-7 amino acids) and charge (negative, neutral, positive). To confirm the capability of transporting bioactive cargos into cells, pro-apoptotic peptides were integrated into IGPNs, which demonstrated potent killing of human cervix carcinoma HeLa and murine neuroblastoma N2a cells at a 10 µM peptide concentration via the complementary mechanisms of peptide-triggered apoptosis and Fe(III)-mediated ROS generation. This study demonstrates the establishment of IGPNs as a novel and versatile platform for the assembly of peptides into nanoparticles, which can be used for cellular delivery of bioactive peptides combined with intrinsic ROS generation.

Building Blocks and COFs Formed in Concert-Three-Component Synthesis of Pyrene-Fused Azaacene Covalent Organic Framework in the Bulk and as Films.

A three-component synthesis methodology is described for the formation of covalent organic frameworks (COFs) containing extended aromatics. Notably, this approach enables synthesis of the building blocks and COF along parallel reaction landscapes, on a similar timeframe. The use of fragmental building block components, namely pyrene dione diboronic acid as aggregation-inducing COF precursor and the diamines o-phenylenediamine (Ph), 2,3-diaminonaphthalene (Naph), or (1R,2R)-(+)-1,2-diphenylethylenediamine (2Ph) as extending functionalization units in conjunction with 2,3,6,7,10,11-hexahydroxytriphenylene, resulted in the formation of the corresponding pyrene-fused azaacene, i.e., Aza-COF series with full conversion of the dione moiety, long-range order, and high surface area. In addition, the novel three-component synthesis was successfully applied to produce highly crystalline, oriented thin films of the Aza-COFs with nanostructured surfaces on various substrates. The Aza-COFs exhibit light absorption maxima in the blue spectral region, and each Aza-COF presents a distinct photoluminescence profile. Transient absorption measurements of Aza-Ph- and Aza-Naph-COFs suggest ultrafast relaxation dynamics of excited-states within these COFs.

Single-Step Plasmonic Dimer Printing by Gold Nanorod Splitting with Light.

Optical printing is a flexible strategy to precisely pattern plasmonic nanoparticles for the realization of nanophotonic devices. However, the generation of strongly coupled plasmonic dimers by sequential particle printing can be a challenge. Here, we report an approach to generate and pattern dimer nanoantennas in a single step by optical splitting of individual gold nanorods with laser light. We show that the two particles that constitute the dimer can be separated by sub-nanometer distances. The nanorod splitting process is explained by a combination of plasmonic heating, surface tension, optical forces, and inhomogeneous hydrodynamic pressure introduced by a focused laser beam. This realization of optical dimer formation and printing from a single nanorod provides a means for dimer patterning with high accuracy for nanophotonic applications.

Sb-Mediated Tuning of Growth- and Exciton Dynamics in Entirely Catalyst-Free GaAsSb Nanowires.

Vapor-liquid-solid (VLS) growth is the mainstream method in realizing advanced semiconductor nanowires (NWs), as widely applied to many III-V compounds. It is exclusively explored also for antimony (Sb) compounds, such as the relevant GaAsSb-based NW materials, although morphological inhomogeneities, phase segregation, and limitations in the supersaturation due to Sb strongly inhibit their growth dynamics. Fundamental advances are now reported here via entirely catalyst-free GaAsSb NWs, where particularly the Sb-mediated effects on the NW growth dynamics and physical properties are investigated in this novel growth regime. Remarkably, depending on GaAsSb composition and nature of the growth surface, both surfactant and anti-surfactant action is found, as seen by transitions between growth acceleration and deceleration characteristics. For threshold Sb-contents up to 3-4%, adatom diffusion lengths are increased ≈sevenfold compared to Sb-free GaAs NWs, evidencing the significant surfactant effect. Furthermore, microstructural analysis reveals unique Sb-mediated transitions in compositional structure, as well as substantial reduction in twin defect density, ≈tenfold over only small compositional range (1.5-6% Sb), exhibiting much larger dynamics as found in VLS-type GaAsSb NWs. The effect of such extended twin-free domains is corroborated by ≈threefold increases in exciton lifetime (≈4.5 ns) due to enlarged electron-hole pair separation in these phase-pure NWs.

Interfacial Manganese-Doping in CsPbBr3 Nanoplatelets by Employing a Molecular Shuttle.

Mn-doping in cesium lead halide perovskite nanoplatelets (NPls) is of particular importance where strong quantum confinement plays a significant role towards the exciton-dopant coupling. In this work, we report an immiscible bi-phasic strategy for post-synthetic Mn-doping of CsPbX3 (X=Br, Cl) NPls. A systematic study shows that electron-donating oleylamine acts as a shuttle ligand to transport MnX2 through the water-hexane interface and deliver it to the NPls. The halide anion also plays an essential role in maintaining an appropriate radius of Mn2+ and thus fulfilling the octahedral factor required for the formation of perovskite crystals. By varying the thickness of parent NPls, we can tune the dopant incorporation and, consequently, the exciton-to-dopant energy transfer process in doped NPls. Time-resolved optical measurements offer a detailed insight into the exciton-to-dopant energy transfer process. This new approach for post-synthetic cation doping paves a way towards exploring the cation exchange process in several other halide perovskites at the polar-nonpolar interface.

Dark and Bright Excitons in Halide Perovskite Nanoplatelets.

Semiconductor nanoplatelets (NPLs), with their large exciton binding energy, narrow photoluminescence (PL), and absence of dielectric screening for photons emitted normal to the NPL surface, could be expected to become the fastest luminophores amongst all colloidal nanostructures. However, super-fast emission is suppressed by a dark (optically passive) exciton ground state, substantially split from a higher-lying bright (optically active) state. Here, the exciton fine structure in 2-8 monolayer (ML) thick Csn - 1 Pbn Br3n + 1 NPLs is revealed by merging temperature-resolved PL spectra and time-resolved PL decay with an effective mass model taking quantum confinement and dielectric confinement anisotropy into account. This approach exposes a thickness-dependent bright-dark exciton splitting reaching 32.3 meV for the 2 ML NPLs. The model also reveals a 5-16 meV splitting of the bright exciton states with transition dipoles polarized parallel and perpendicular to the NPL surfaces, the order of which is reversed for the thinnest NPLs, as confirmed by TR-PL measurements. Accordingly, the individual bright states must be taken into account, while the dark exciton state strongly affects the optical properties of the thinnest NPLs even at room temperature. Significantly, the derived model can be generalized for any isotropically or anisotropically confined nanostructure.

Metamorphosis of Heterostructured Surface-Mounted Metal-Organic Frameworks Yielding Record Oxygen Evolution Mass Activities.

Materials derived from surface-mounted metal-organic frameworks (SURMOFs) are promising electrocatalysts for the oxygen evolution reaction (OER). A series of mixed-metal, heterostructured SURMOFs is fabricated by the facile layer-by-layer deposition method. The obtained materials reveal record-high electrocatalyst mass activities of ≈2.90 kA g-1 at an overpotential of 300 mV in 0.1 m KOH, superior to the benchmarking precious and nonprecious metal electrocatalysts. This property is assigned to the particular in situ self-reconstruction and self-activation of the SURMOFs during the immersion and the electrochemical treatment in alkaline aqueous electrolytes, which allows for the generation of NiFe (oxy)hydroxide electrocatalyst materials of specific morphology and microstructure.

1,10-Phenanthroline as an Efficient Bifunctional Passivating Agent for MAPbI3 Perovskite Solar Cells.

Passivation is one of the most promising concepts to heal defects created at the surface and grain boundaries of polycrystalline perovskite thin films, which significantly deteriorate the photovoltaic performance and stability of corresponding devices. Here, 1,10-phenanthroline, known as a bidentate chelating ligand, is implemented between the methylammonium lead iodide (MAPbI3) film and the hole-transport layer for both passivating the lead-based surface defects (undercoordinated lead ions) and converting the excess/unreacted lead iodide (PbI2) buried at interfaces, which is problematic for the long-term stability, into "neutralized" and beneficial species (PbI2(1,10-phen)x, x = 1, 2) for efficient hole transfer at the modified interface. The defect healing ability of 1,10-phenanthroline is verified with a set of complementary techniques including photoluminescence (steady-state and time-resolved), space-charge-limited current (SCLC) measurements, light intensity dependent JV measurements, and Fourier-transform photocurrent spectroscopy (FTPS). In addition to these analytical methods, we employ advanced X-ray scattering techniques, nano-Fourier transform infrared (nano-FTIR) spectroscopy, and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) to further analyze the structure and chemical composition at the perovskite surface after treatment at nanoscale spatial resolution. On the basis of our experimental results, we conclude that 1,10-phenanthroline treatment induces the formation of different morphologies with distinct chemical compositions on the surface of the perovskite film such that surface defects are effectively passivated, and excess/unreacted PbI2 is converted into beneficial complex species at the modified interface. As a result, an improved power conversion efficiency (20.16%) and significantly more stable unencapsulated perovskite solar cells are obtained with the 1,10-phenanthroline treatment compared to the MAPbI3 reference device (18.03%).

An Electrically Conducting Three-Dimensional Iron-Catecholate Porous Framework.

We report the synthesis of a unique cubic metal-organic framework (MOF), Fe-HHTP-MOF, comprising hexahydroxytriphenylene (HHTP) supertetrahedral units and FeIII ions, arranged in a diamond topology. The MOF is synthesized under solvothermal conditions, yielding a highly crystalline, deep black powder, with crystallites of 300-500 nm size and tetrahedral morphology. Nitrogen sorption analysis indicates a highly porous material with a surface area exceeding 1400 m2 g-1 . Furthermore, Fe-HHTP-MOF shows broadband absorption from 475 up to 1900 nm with excellent absorption capability of 98.5 % of the incoming light over the visible spectral region. Electrical conductivity measurements of pressed pellets reveal a high intrinsic electrical conductivity of up to 10-3  S cm-1 . Quantum mechanical calculations predict Fe-HHTP-MOF to be an efficient electron conductor, exhibiting continuous charge-carrier pathways throughout the structure.

Growth dynamics and compositional structure in periodic InAsSb nanowire arrays on Si (111) grown by selective area molecular beam epitaxy.

We report a comprehensive study of the growth dynamics in highly periodic, composition tunable InAsSb nanowire (NW) arrays using catalyst-free selective area molecular beam epitaxy. Employing periodically patterned SiO2-masks on Si (111) with various mask opening sizes (20-150 nm) and pitches (0.25-2 µm), high NW yield of >90% (irrespective of the InAsSb alloy composition) is realized by the creation of an As-terminated 1 × 1-Si(111) surface prior to NW nucleation. While the NW aspect ratio decreases continually with increasing Sb content (x Sb from 0% to 30%), we find a remarkable dependence of the aspect ratio on the mask opening size yielding up to ∼8-fold increase for openings decreasing from 150 to 20 nm. The effects of the interwire separation (pitch) on the NW aspect ratio are strongest for pure InAs NWs and gradually vanish for increasing Sb content, suggesting that growth of InAsSb NW arrays is governed by an In surface diffusion limited regime even for the smallest investigated pitches. Compositional analysis using high-resolution x-ray diffraction reveals a substantial impact of the pitch on the alloy composition in homogeneous InAsSb NW arrays, leading to much larger x Sb as the pitch increases due to decreasing competition for Sb adatoms. Scanning transmission electron microscopy and associated energy-dispersive x-ray spectroscopy performed on the cross-sections of individual NWs reveal an interesting growth-axis dependent core-shell like structure with a discontinuous few-nm thick Sb-deficient coaxial boundary layer and six Sb-deficient corner bands. Further analysis evidences the presence of a nanoscale facet at the truncation of the (111)B growth front and {1-10} sidewall surfaces that is found responsible for the formation of the characteristic core-shell structure.

Photobase effect for just-in-time delivery in photocatalytic hydrogen generation.

Carbon dots (CDs) are a promising nanomaterial for photocatalytic applications. However, the mechanism of the photocatalytic processes remains the subject of a debate due to the complex internal structure of the CDs, comprising crystalline and molecular units embedded in an amorphous matrix, rendering the analysis of the charge and energy transfer pathways between the constituent parts very challenging. Here we propose that the photobasic effect, that is the abstraction of a proton from water upon excitation by light, facilitates the photoexcited electron transfer to the proton. We show that the controlled inclusion in CDs of a model photobase, acridine, resembling the molecular moieties found in photocatalytically active CDs, strongly increases hydrogen generation. Ultrafast spectroscopy measurements reveal proton transfer within 30 ps of the excitation. This way, we use a model system to show that the photobasic effect may be contributing to the photocatalytic H2 generation of carbon nanomaterials and suggest that it may be tuned to achieve further improvements. The study demonstrates the critical role of the understanding the dynamics of the CDs in the design of next generation photocatalysts.

Mixed Mercaptocarboxylic Acid Shells Provide Stable Dispersions of InPZnS/ZnSe/ZnS Multishell Quantum Dots in Aqueous Media.

Highly luminescent indium phosphide zinc sulfide (InPZnS) quantum dots (QDs), with zinc selenide/zinc sulfide (ZnSe/ZnS) shells, were synthesized. The QDs were modified via a post-synthetic ligand exchange reaction with 3-mercaptopropionic acid (MPA) and 11-mercaptoundecanoic acid (MUA) in different MPA:MUA ratios, making this study the first investigation into the effects of mixed ligand shells on InPZnS QDs. Moreover, this article also describes an optimized method for the correlation of the QD size vs. optical absorption of the QDs. Upon ligand exchange, the QDs can be dispersed in water. Longer ligands (MUA) provide more stable dispersions than short-chain ligands. Thicker ZnSe/ZnS shells provide a better photoluminescence quantum yield (PLQY) and higher emission stability upon ligand exchange. Both the ligand exchange and the optical properties are highly reproducible between different QD batches. Before dialysis, QDs with a ZnS shell thickness of ~4.9 monolayers (ML), stabilized with a mixed MPA:MUA (mixing ratio of 1:10), showed the highest PLQY, at ~45%. After dialysis, QDs with a ZnS shell thickness of ~4.9 ML, stabilized with a mixed MPA:MUA and a ratio of 1:10 and 1:100, showed the highest PLQYs, of ~41%. The dispersions were stable up to 44 days at ambient conditions and in the dark. After 44 days, QDs with a ZnS shell thickness of ~4.9 ML, stabilized with only MUA, showed the highest PLQY, of ~34%.

Templated-Assembly of CsPbBr3 Perovskite Nanocrystals into 2D Photonic Supercrystals with Amplified Spontaneous Emission.

Perovskite nanocrystals (NCs) have revolutionized optoelectronic devices because of their versatile optical properties. However, controlling and extending these functionalities often requires a light-management strategy involving additional processing steps. Herein, we introduce a simple approach to shape perovskite nanocrystals (NC) into photonic architectures that provide light management by directly shaping the active material. Pre-patterned polydimethylsiloxane (PDMS) templates are used for the template-induced self-assembly of 10 nm CsPbBr3 perovskite NC colloids into large area (1 cm2 ) 2D photonic crystals with tunable lattice spacing, ranging from 400 nm up to several microns. The photonic crystal arrangement facilitates efficient light coupling to the nanocrystal layer, thereby increasing the electric field intensity within the perovskite film. As a result, CsPbBr3 2D photonic crystals show amplified spontaneous emission (ASE) under lower optical excitation fluences in the near-IR, in contrast to equivalent flat NC films prepared using the same colloidal ink. This improvement is attributed to the enhanced multi-photon absorption caused by light trapping in the photonic crystal.

Manganese-Doping-Induced Quantum Confinement within Host Perovskite Nanocrystals through Ruddlesden-Popper Defects.

The concept of doping Mn2+ ions into II-VI semiconductor nanocrystals (NCs) was recently extended to perovskite NCs. To date, most studies on Mn2+ doped NCs focus on enhancing the emission related to the Mn2+ dopant via an energy transfer mechanism. Herein, we found that the doping of Mn2+ ions into CsPbCl3 NCs not only results in a Mn2+ -related orange emission, but also strongly influences the excitonic properties of the host NCs. We observe for the first time that Mn2+ doping leads to the formation of Ruddlesden-Popper (R.P.) defects and thus induces quantum confinement within the host NCs. We find that a slight doping with Mn2+ ions improves the size distribution of the NCs, which results in a prominent excitonic peak. However, with increasing the Mn2+ concentration, the number of R.P. planes increases leading to smaller single-crystal domains. The thus enhanced confinement and crystal inhomogeneity cause a gradual blue shift and broadening of the excitonic transition, respectively.