Ultrasound-assisted Cu(II) Strecker-functionalized organocatalyst for green azide-alkyne cycloaddition and Ullmann reactions.

A new aminonitrile-functionalized Fe3O4 has been synthesized via the Strecker reaction, the designed aminonitrile ligand on the surface of the magnetic core coordinated to copper(II) to obtain the final new catalyst. The fabricated nanocatalyst was characterized by Fourier transform Infrared (FT-IR), Field Emission Scanning Electron Microscopy (FESEM), Energy-Dispersive X-ray spectroscopy (EDX), Transmission Electron Microscopy (TEM), Vibrating-Sample Magnetometer (VSM), Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), and Thermogravimetric Analysis (TGA). The high tendency of nitrogens in the aminonitrile functional group to make a complex with Cu(II) has caused the practical activity of this nucleus in this catalyst. This nanocatalyst performance was investigated in azide-alkyne Huisgen cycloaddition (3 + 2) reaction for achieving to 1,4-disubstituted 1,2,3-triazoles in water as a green media at room temperature. In another try, Classic Ullmann Reaction was investigated for the synthesis of biaryls at 85 °C promoted by ultrasonic condition (37 kHz). The reaction scope was explored using different reactants and the results of using this developed catalytic system demonstrated its capacity to reduce the reaction time and enhance the reaction efficiency to provide good to excellent product yield. Conversely, the simple recycling and reusability of this catalyst for at least six times without any noticeable leaching of copper makes it a potential future catalyst for synthesizing such compounds.

Fe3O4@nitrogen-doped carbon core-double shell nanotubes as a novel and efficient nanosorbent for ultrasonic assisted dispersive magnetic solid phase extraction of heterocyclic pesticides from environmental soil and water samples.

Fe3O4@nitrogen-doped carbon core-double shell nanotubes (Fe3O4@N-C C-DSNTs) were successfully synthesized and applied as a novel nanosorbent in ultrasonic assisted dispersive magnetic solid phase extraction (UA-DMSPE) of tribenuron-methyl, fenpyroximate, and iprodione. Subsequently, corona discharge ion mobility spectrometry (CD-IMS) was employed for the detection of the extracted analytes. Effective parameters on the extraction recovery percentage (ER%) were systematically investigated and optimized. Under optimal conditions, UA-DMSPE-CD-IMS demonstrated remarkable linearity in different ranges within 1.0 - 700 ng mL-1 with correlation coefficients exceeding 0.993, repeatability values below 6.9%, limits of detection ranging from 0.30 to 0.90 ng mL-1, high preconcentration factors (418 - 435), and ER% values (83 - 87%). The potential of the proposed method was further demonstrated by effectively determining the targeted pesticides in various environmental soil and water samples, exhibiting relative recoveries in the range 92.1 - 102%.

Catalytic stereoselective Mannich-type reactions for construction of fluorinated compounds.

For its unique role in developing and designing new bioactive materials and healthcare products, fluoro-organic compounds have attracted remarkable interest. Along with ever-increasing demand for a wider availability of fluorine-containing structural units, a large diversity of methods has been introduced to incorporate fluorine atoms specially in a stereoselective fashion. Among them, catalytic Mannich reaction can proceed with a broad variety of reactants and open clear paths for the synthesis of versatile amine synthons in the synthesis of natural product and pharmaceutical molecules. This review provides an overview of the employment of catalytic asymmetric Mannich reactions in the synthesis of fluorine-containing amine compounds and highlights the conceivable distinct mechanisms.

A mesoporous nanosorbent composed of silica, graphene, and palladium (II) for ultrasound-assisted dispersive solid-phase extraction of organophosphorus pesticides prior to their quantitation by ion mobility spectrometry.

A new ultrasonic-assisted dispersive solid-phase extraction method using mesoporous nanosorbent composed of silica, graphene, and palladium (II) (M S/G@-SH@Pd (II)), coupled with corona discharge ion mobility spectrometry, was developed for trace determination of organophosphorus pesticides. Initially, the M S/G@-SH@Pd (II) nanosorbent was synthesized and characterized. Then, the nanosorbent was used for the sorption and extraction of organophosphorus pesticides. Under the optimized conditions (pH = 7.0, 15 mg of sorbent, 3 min extraction time, ethanol as desorption agent, 3 min centrifuge time), the proposed technique provided good linearity (R2 > 0.994), repeatability (RSD < 4.6%), low limits of detection (0.15-0.30 ng mL-1), excellent preconcentration factor (PF = 472-478), and high recoveries (93-94%). The method was applied to the determination of organophosphorus pesticides in real water samples. The sorbent was reused in 5 cycles without any considerable loss of activity. Graphical abstract Schematic presentation of design and synthesis of mesoporous nanosorbent composed of silica, graphene, and palladium (II) for ultrasound-assisted dispersive solid-phase extraction of organophosphorus pesticides prior to their quantitation by ion mobility spectrometry.

Ultrasound assisted dispersive solid phase extraction of triazole fungicides by using an N-heterocyclic carbene copper complex supported on ionic liquid-modified graphene oxide as a sorbent.

An ultrasound-assisted method is described for dispersive solid phase extraction of trace levels of triazole fungicides. A sorbent was prepared from an N-heterocyclic carbene copper complex that was supported on ionic liquid-modified graphene oxide. The sorbent was characterized by scanning electron microscopy, transmission electron microscopy, Raman and FT-IR spectroscopy, energy-dispersive X-ray spectroscopy and elemental mapping. The capability of sorption and extraction is mainly based on complexation with Cu (I) ions. The variables affecting extraction were optimized. Following desorption with ethanol, the fungicides were quantified by corona discharge ion mobility spectrometry. Under optimized conditions (solution pH value: 7.0; amount of sorbent: 10 mg; extraction time: 3 min; desorption agent: ethanol), the technique provides good linearity (>0.994), repeatability (RSD < 4.1%), low limits of detection (0.18 ng.mL-1), excellent preconcentration factors (468-476) and high recoveries from spiked environmental water samples (92-94%). The sorbent can be reused over five cycles without significant loss of its activity. Graphical abstract Schematic presentation of design and synthesis of the N-heterocyclic carbene copper complex supported on ionic liquid-modified graphene oxide as a sorbent for triazole fungicides and its application in ultrasound-assisted dispersive solid phase extraction with ion mobility spectrometric detection.

Synthesis of novel norsufentanil analogs via a four-component Ugi reaction and in vivo, docking, and QSAR studies of their analgesic activity.

Novel substituted amino acid tethered norsufentanil derivatives were synthesized by the four-component Ugi reaction. Norsufentanil was reacted with succinic anhydride to produce the corresponding carboxylic acid. The resulting carboxylic acid has undergone a multicomponent reaction with different aldehydes, amines, and isocyanides to produce a library of the desired compounds. In all cases, amide bond rotation was observed in the NMR spectra. In vivo analgesic activity of the synthesized compounds was evaluated by a tail flick test. Very encouraging results were obtained for a number of the synthesized products. Some of the synthesized compounds such as 5a, 5b, 5h, 5j, and 5r were found to be more potent than sufentanil, sufentanil citrate, and norsufentanil. Binding modes between the compounds and mu and delta-opioid receptors were studied by molecular docking method. The relationship between the molecular structural features and the analgesic activity was investigated by a quantitative structure-activity relationship model. The results of the molecular modeling studies and the in vivo analgesic activity suggested that the majority of the synthesized compounds were more potent than sufentanil and norsufentanil.

Pd-Catalyzed regioselective C-H halogenation of quinazolinones and benzoxazinones.

A Pd-catalyzed ortho-selective halogenation of benzoxazinone and quinazolinone scaffolds has been described employing N-halosuccinimide as both a halogen source and an oxidant reagent via C-H bond activation. This transformation shows high chemo- and regioselectivities and demonstrates a broad range of benzoxazinone and quinazolinone substrates with different functional groups and has been scaled up to the gram level.

Combining click-multicomponent reaction: one-pot synthesis of triazolyl methoxy-phenyl indazolo[2,1-b]phthalazine-trione derivatives.

[(1,2,3-Triazol-4-yl)methoxy-phenyl]-2H-indazolo[2,1-b]phthalazine-trione derivatives were synthesized in a simple and efficient method from the one-pot four-component condensation reaction of phthalhydrazide, aromatic propargyloxy aldehydes, active methylene compounds (dimedone and 1,3-cyclohexanedione), and azides in the presence of Cu(OAc)(2)/sodium ascorbate and p-toluenesulfonic acid as catalysts in good to excellent yields.

One-pot synthesis of 1,2,3-triazole linked dihydropyrimidinones via Huisgen 1,3-dipolar/Biginelli cycloaddition.

The combination of the Biginelli reaction with click chemistry has been used for the one-pot synthesis of 1,2,3-triazole linked dihydropyrimidinones from azides, aromatic aldehydes containing a propargyl ether group, urea, and 1,3-dicarbonyl compounds using Cu(OAc)(2)/sodium ascorbate as catalyst in acetic acid under mild reaction conditions.

Sonochemical multi-component synthesis of spirooxindoles.

New and efficient multi-component methods have been developed for the synthesis of spirooxindoles in the presence of a catalytic amount of p-TSA as an inexpensive and available catalyst in EtOH under ultrasound irradiation. The method is simple, starts from readily accessible commercial starting materials, and provides biologically interesting products in good yields and short reaction times.

Synthesis of diheterocyclic compounds based on triazolyl methoxy phenylquinazolines via a one-pot four-component-click reaction.

A facile and highly efficient method for one-pot four-component synthesis of triazolyl methoxy phenylquinazolines is described. A mixture of aromatic propargylated aldehydes, different azides, 2-aminobenzophenone derivatives, and ammonium acetate were condensed in the presence of catalytic amounts of acidic ionic liquid, 1-methylimidazolium trifluoroacetate, ([Hmim]TFA), and Cu(OAc)(2)/sodium ascorbate to afford the corresponding products in excellent yields. This methodology is highly efficient for structurally diverse azides.

[Hmim]TFA catalyzed multicomponent reaction: direct, mild, and efficient procedure for the synthesis of 1,2-dihydroquinazoline derivatives.

4-Substituted-spiro-1,2-dihydroquinazolines and related compounds were synthesized by direct reaction of 2-aminobenzophenones, isatin, or 1,2-diketone derivatives and ammonium acetate in the presence of dual role catalyst-solvent ionic liquid, [Hmim]TFA. Excellent conversion of starting materials was achieved to the desired 1,2-dihydroquinazoline products.

Parallel microwave synthesis of 2-styrylquinazolin-4(3H)-ones in a high-throughput platform using HPLC/GC vials as reaction vessels.

The application of a high-throughput reaction platform for performing parallel microwave synthesis in sealed HPLC/GC vials contained in a strongly microwave-absorbing silicon carbide plate is described. The use of aluminum crimp caps with PTFE coated silicone septa in combination with an appropriate plate sealing mechanism allows processing of reaction volumes from 0.5-1.5 mL at temperatures of approximately 250 degrees C and pressures of up to approximately 20 bar. A library of 39 2-styrylquinazolin-4(3H)-one derivatives was prepared in a two-step/one-pot parallel fashion involving the initial three-component condensation of four anthranilic acids with acetic anhydride and ammonium acetate at 250 degrees C for 30 min. This was followed by catalyst-free condensation of the resulting 2-methylquinazolinones with a selection of 15 aromatic aldehydes. Compared to single-mode sequential microwave synthesis, the overall processing times for library synthesis could be significantly reduced.

Phosphotungstic acid: an efficient, cost-effective and recyclable catalyst for the synthesis of polysubstituted quinolines.

Phosphotungstic acid (H(3)PW(12)O(40)) was used as an efficient and recyclable catalyst for the synthesis of polysubstituted quinolines through the Friedländer condensation of 2-aminoarylketone with carbonyl compounds, which was achieved by conventional heating under solvent-free conditions.

Novel and efficient one-pot tandem synthesis of 2-styryl-substituted 4(3H)-quinazolinones.

A novel one-pot tandem synthesis of 2-styryl-4(3 H)-quinazolinones in an acidic ionic liquid is reported. In this procedure isatoic anhydride, a primary aniline or ammonium acetate, and triethylorthoacetate are reacted in the presence of imidazolium trifluoroacetate [Hmim]TFA. Subsequently an aromatic aldehyde is added to the mixture to afford the title compounds in high to excellent yields.

Eco-friendly and efficient one-pot synthesis of alkyl- or aryl-14H-dibenzo[a,j]xanthenes in water.

Alkyl- or aryl-14H-dibenzo[a,j]xanthene derivatives are synthesized efficiently by the reaction of beta-naphthol and aliphatic and aromatic aldehydes in the presence of KAl(SO4)2 x 12 H2O (alum) under aqueous condition at 100 degrees C. Different types of aromatic and aliphatic aldehydes are used in the reaction and in all cases the products synthesized successfully. Several solvents were examined for this reaction; however, in terms of reaction yield and time, water was found to be the optimum solvent.

Optimization of microwave-assisted extraction for alizarin and purpurin in Rubiaceae plants and its comparison with conventional extraction methods.

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for two common color pigments, alizarin and purpurin, in various samples of Rubiaceae plants. Several variables that can potentially affect the extraction efficiency, namely temperature, methanol concentration in the extractant mixture, time, and solvent volume were optimized by means of a central composite design approach. The results suggest that temperature and methanol concentration in the solvent mixture are statistically the most significant factors. The separation and quantitative determination of the pigments was carried out in less than 6 min by a developed high-performance liquid chromatographic method with UV detection at 250 nm. Under optimum operating conditions, MAE showed significantly higher recoveries than those obtained by the conventional extraction methods (ultrasonic and reflux extraction), ranging from 84 to 94%. In addition, a drastic reduction of the extraction time (20 min versus 6 h) and solvent consumption (20 versus 100 mL) was achieved with a reproducibility (RSDs < 10%) comparable with that provided by the reflux extraction as a reference method.