Beta-tricalcium phosphate ceramic triggers fast and robust bone formation by human mesenchymal stem cells.

Due to their osteoconductive and inductive properties, a variety of calcium phosphate (CaP) scaffolds are commonly used in orthopaedics as graft material to heal bone defects. In this study, we have used two CaP scaffolds with different hydroxyapatite (HA) and ß-tricalcium phosphate (ß-TCP) ratios (MBCP®; 60/40 and MBCP+ ®; 20/80) to investigate their intrinsic capacity to favour human bone marrow stem cells (hBMSCs) osteogenic differentiation capacity. We report that MBCP+ ® showed in in vitro culture model a higher rate of calcium ion release in comparison with MBCP®. In two defined coculture systems, the hBMSC seeded onto MBCP+ ® presented an increased amount of VEGF secretion, resulting in an enhanced endothelial cell proliferation and capillary formation compared with hBMSC seeded onto MBCP®. When both ceramics combined with hBMSC were implanted in a nude mouse model, we observed a faster osteogenic differentiation and enhancement mature bone deposition sustained by the presence of a vast host vasculature within the MBCP+ ® ceramics. Bone formation was observed in samples highly positive to the activation of calcium sensing receptor protein (CaSr) on the surface of seeded hBMSC that also shown higher BMP-2 protein expression. With these data we provide valuable insights in the possible mechanisms of ossification and angiogenesis by hBMSC that we believe to be primed by calcium ions released from CaP scaffolds. Evidences could lead to an optimization of ceramic scaffolds to prime bone repair.

Bioactivity of Biphasic Calcium Phosphate Granules, the Control of a Needle-Like Apatite Layer Formation for Further Medical Device Developments.

Biphasic calcium phosphate (BCP) bioceramics (hydroxyapatite/tricalcium phosphate, or HA/TCP) for tissue engineering and drug delivery systems is a unique know-how. A mechanical mixture of HA and TCP does not lead to such bioactive ceramics. The wet elaboration conditions of calcium-deficient apatite (CDA) or CDHA, followed by sintering, converts it into TCP and HA. The dissolution precipitation of nano-sized needle-like crystals at the surface of BCP occurs on time at body temperature. Combining several technics of characterization [scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive x-ray spectroscopy (EDX), Brunauer-Emmett-Teller method (BET), chemical analysis, x-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR)], we demonstrated an evolution on time of the HA/ß-TCP. The current paper describes the crystallographic evolution of initial ß-TCP rhombohedral crystallographic structure to microsized needle-like layer corresponding to apatitic TCP form. This phenomenon leads to an increase of the HA/TCP ratio, since hexagonal apatitic TCP is similar to hexagonal HA. However, the Ca/P ratio (reflecting the chemical composition HA/TCP) remains unchanged. Thus, the high reactivity of BCP involves dynamic evolution from rhombohedral to hexagonal structure, but not a chemical change. The dynamic process is reversible by calcination. These events are absolutely necessary for smart scaffolds in bone regeneration and orthobiology.

A doxycycline inducible, adenoviral bone morphogenetic protein-2 gene delivery system to bone.

We report the novel use of a tuneable, non-integrating viral gene delivery system to bone that can be combined with clinically approved biomaterials in an 'off-the-shelf' manner. Specifically, a doxycycline inducible Tet-on adenoviral vector (AdTetBMP-2) in combination with mesenchymal stromal cells (MSCs), fibrin and a biphasic calcium phosphate ceramic (MBCP®) was used to repair large bone defects in nude rats. Bone morphogenetic protein-2 (BMP-2) transgene expression could be effectively tuned by modification of the doxycycline concentration. The effect of adenoviral BMP-2 gene delivery upon bone healing was investigated in vivo in 4 mm critically sized, internally fixated, femoral defects. MSCs were transduced either by direct application of AdTetBMP-2 or by pre-coating MBCP granules with the virus. Radiological assessment scores post-mortem were significantly improved upon delivery of AdTetBMP-2. In AdTetBMP-2 groups, histological analysis revealed significantly more newly formed bone at the defect site compared with controls. Newly formed bone was vascularized and fully integrated with nascent tissue and implanted biomaterial. Improvement in healing outcome was achieved using both methods of vector delivery (direct application vs. pre-coating MCBP). Adenoviral delivery of BMP-2 enhanced bone regeneration achieved by the transplantation of MSCs, fibrin and MBCP in vivo. Importantly, our in vitro and in vivo data suggest that this can be achieved with relatively low (ng/ml) levels of the growth factor. Our model and novel gene delivery system may provide a powerful standardized tool for the optimization of growth factor delivery and release for the healing of large bone defects. Copyright © 2016 John Wiley & Sons, Ltd.

Smart scaffolds: the future of bioceramic.

The commercial offer for bioceramic bone substitutes is very large, however, the prerequisites for applications in bone reconstruction and tissue engineering, are most often absent. The main criteria being: on the one hand physico-chemical features providing surgeons with an injectable and/or shapeable biomaterial; on the second hand the multi-scale bioactivity leading to osteoconduction and osteoinduction properties. In order to obtain greater suitability according to the nature of the bone defect to be treated, new bone regeneration technologies, "smart scaffolds" must be developed and optimize to support suitable Ortho Biology.

Tolerance and osteointegration of TricOs(TM)/MBCP(®) in association with fibrin sealant in mastoid obliteration after canal wall-down technique for cholesteatoma.

CONCLUSION: The TricOs™/MBCP(®) and fibrin sealant composite was a convenient, effective, and well-tolerated material for mastoid cavity filling and immediate reconstruction of the external auditory meatus after cholesteatoma surgery with canal wall down (CWD). OBJECTIVE: To assess the tolerance and osteointegration of a bone graft substitute, TricOs™/MBCP(®), in association with fibrin sealant for filling the mastoid cavity after cholesteatoma surgery using the CWD technique. METHODS: In this prospective observational study 57 patients with cholesteatoma suitable for CWD were recruited from April 2006 to April 2008 and followed up for 1 year. The mastoid cavity was filled with TricOs™/MBCP(®) followed by immediate reconstruction of the external auditory meatus covered with fascia temporalis and/or cartilage. The main outcome was skin tolerance assessed by a novel weighted score emphasizing long-term results. The typical weighted reference score was 1.67; skin tolerance was considered acceptable if 75% of patients had a score ≤ 1.67. Secondary outcomes were otorrhea and/or otalgia, hearing, and osteointegration assessed through computed tomography scanning at 12 months. RESULTS: Forty-one patients had a complete follow-up; 34 (82.3%) patients achieved the main end point with scores ≤ 1.67. Otorrhea decreased postoperatively. No otalgia interfering with daily tasks was reported. Ossicular reconstruction was carried out in 29 patients. Absence of cochlear toxicity was confirmed by unimpaired bone conduction. Preoperative and postoperative speech audiometry results were similar. No serious adverse events were observed. Osteointegration was satisfactory with hyperdensity or intermediate density in 95% of patients at 12 months.

Novel analysis model for implant osseointegration using ectopic bone formation via the recombinant human bone morphogenetic protein-2/macroporous biphasic calcium phosphate block system in rats: a proof-of-concept study.

PURPOSE: The osseointegration around titanium mini-implants installed in macroporous biphasic calcium phosphate (MBCP) blocks was evaluated after incubation with recombinant human bone morphogenetic protein-2 (rhBMP-2) in an ectopic subcutaneous rat model. METHODS: Mini-implants (φ1.8×12 mm) were installed in MBCP blocks (bMBCPs, 4×5×15 mm) loaded with rhBMP-2 at 0.1 mg/mL, and then implanted for 8 weeks into subcutaneous pockets of male Sprague-Dawley rats (n=10). A histomorphometric analysis was performed, and the bone-to-implant contact (BIC) and bone density were evaluated. RESULTS: Significant osteoinductive activity was induced in the rhBMP-2/bMBCP group. The percentage of BIC was 41.23±4.13% (mean±standard deviation), while bone density was 33.47±5.73%. In contrast, no bone formation was observed in the bMBCP only group. CONCLUSIONS: This model represents a more standardized tool for analyzing osseointegration and bone healing along the implant surface and in bMBCPs that excludes various healing factors derived from selected animals and defect models.

Biphasic bone substitute and fibrin sealant for treatment of benign bone tumours and tumour-like lesions.

PURPOSE: Bone defects resulting from tumour resection or curettage are most commonly reconstructed with autologous bone graft which is associated with limited availability and donor site morbidity. Recent research has focussed on synthetic biomaterials as bone graft substitutes. The aim of this study was to assess the safety and efficiency of a bone substitute as an alternative for autologous bone in the treatment of benign bone tumours and tumour-like lesions. METHODS: In the present study, a biphasic ceramic (60% HA and 40% ß-TCP) combined with a fibrin sealant was used to reconstruct defects in 51 patients after curettage of benign bone tumours or tumour-like lesions. Patient age ranged from eight to 68 years (mean 29.7), defect size from 2 cm(3) to 35 cm(3) (mean 12.1), and time of follow-up from one to 56 months (mean 22.7). RESULTS: Radiologic analysis showed complete bony defect consolidation in 50 of 51 patients after up to 56 months. No postoperative fractures were observed. Revision surgery had to be performed in one case. Histological analysis showed new bone formation and good biocompatibility and osseointegration of the implanted material. CONCLUSION: In summary, the biphasic ceramic in combination with fibrin sealant was proven an effective alternative to autologous bone grafts eliminating the risk of donor site morbidity for the patient.

Irreducible traumatic posterior hip dislocation with entrapment and a buttonhole effect.

The authors reported the case of a 27-year-old man who sustained an irreducible postero-lateral traumatic dislocation of the hip with capsular and labral entrapment. Initial X-rays showed only a small acetabular fragment. After two attempts to reduce the hip with muscle paralysis under general anaesthesia failed, the patient was treated by immediate open reduction through a postero-lateral approach. Surgical exploration of the hip revealed a small osteochondral fragment attached to a large piece of labrum and capsule, clogging the acetabulum. The femoral head crossed over the torn capsule with a buttonhole effect. These elements were relieved, the bone fragment was fixed with a 2 mm screw and the capsule was repaired. At the 10-year follow-up, the functional outcome was excellent with a Harris score of 100 points and no signs of necrosis or osteoarthritis. The authors propose a literature review of this uncommon lesion.

Osteoconductive properties of poly(96L/4D-lactide)/beta-tricalcium phosphate in long term animal model.

The objective of this study was to determine the effect of calcium phosphate mineral content on the bone in-growth at the expense of composite of co-polylactide polymer charged with 2 different ratios of ß-TCP granules (10 and 24 w-% of ß-TCP). The evaluation was realized in a long term rabbit bone model. After 24, 48 and 76 weeks, the implants were examined by micro CT, scanning electron microscopy (SEM) using backscattered electron (BSE) and light microscopy (polarized and blue light microscopy). No foreign body reaction was detected during the 76 weeks follow-up in any of the test samples. Polymer hydrolysis began at approximately 24 weeks, by 76 weeks, the pure polymer implant had begun to release P(96L/4D)LA particles and show signs of peripheral localized bone resorption. A decrease in the amount of CaP was noticed between 24 and 76 weeks in both 10 wt-% and 24 wt-% ß-TCP/P(96L/4D)LA composites. The study showed that the highest bone in-growth was with 24 wt-% ß-TCP/P(96L/4D)LA composite. Bone in-growth and mineralization were evident for the composites associated with specific peripheral bone architecture. Fluorescent labelling demonstrated high bone in-growth and remodeling at the interface, while for pure co-polymer no bone remodeling or bone activity was maintained after 48 weeks. The study demonstrated the positive effect of calcium phosphate content into P(96L/4D)LA. This kind of composite is a suitable resorbable osteoconductive matrix, which provides long term stability required for ligament fixation device.

Mandibular segmental defect regenerated with macroporous biphasic calcium phosphate, collagen membrane, and bone marrow graft in dogs.

OBJECTIVE: To reconstruct segmental mandibulectomy using calcium phosphate ceramics and collagen membrane with a delayed bone marrow grafting in experimental animals. DESIGN: Defects of segmental mandibulectomy were filled with calcium phosphate granules and wrapped with a collagen membrane in 4 dogs and left empty as a control in 2 dogs. Two months later, a bone marrow graft was injected into the center of the implants. Animals were humanely killed after a 16-week delay. SUBJECTS: Six adult beagles were included in this study. INTERVENTION: Segmental mandibulectomy. MAIN OUTCOME MEASURE: Bone ingrowth and material resorption in the reconstructed segment. RESULTS: Successful osseous colonization bridged the whole length of the defects. The good new bone formation at the center and the periosteum-like formation at the periphery suggest the osteoinductive role of the bone marrow graft and the healing scaffold role of the membrane. CONCLUSIONS: This model succeeded in regenerating a large segmental defect in the mandible. An investigation with a postimplantation radiation delivery schedule is required with the use of this model, which should be considered as a preclinical study for a bone tissue engineering approach in patients with cancer-related bone defects.

Alveolar ridge augmentation in irradiated rabbit mandibles.

Oral carcinomas are frequently treated with a nonsegmental mandibulectomy plus radiotherapy. Improving the quality of life of these patients depends on the possibilities for dental rehabilitation. The aim of this study was to increase the alveolar ridge height. Twelve white New Zealand rabbits underwent surgery to produce a 11 x 9 x 7 mm(3) horizontal bicortical full-thickness defect at the alveolar ridge of the left mandible. Six were implanted with a composite associating resorbable collagen membrane filled with micro-macroporous biphasic calcium phosphate granules. After a daily radiation delivery schedule for 4 weeks, a total autologous bone marrow graft was injected percutaneously into the center of the implant. All animals were sacrificed at 16 weeks. Successful osseous colonization was observed in all implants. Significant ridge augmentation was observed (p = 0.0349) in the implanted group compared with the control group. This study contributed to producing an experimental model for oncological mandible defects in rabbits.

Porous beta tricalcium phosphate scaffolds used as a BMP-2 delivery system for bone tissue engineering.

Macroporous beta tricalcium phosphate (beta-TCP) scaffolds were evaluated as potential carriers and delivery systems for bone morphogenetic protein-2 (BMP-2). Chemical etching was performed to increase the available surface and thus the protein loading. X-ray diffraction and infrared spectrocopy analyses confirmed the preparation of pure beta-TCP scaffolds. Scanning electron microscopy revealed interconnected porosity (64%) and a microporous surface after chemical etching. Scaffolds loaded with 30 and 15 microg of BMP-2 were implanted respectively into the back muscles and into femoral defects (condyle and diaphysis) of rabbits for 4 weeks. Histological observations confirmed the activity of the BMP-2 released from the scaffolds. Intramuscularly, bone was formed within the BMP-2-loaded scaffold pores. In the bone defects, the effect of released BMP-2 was similarly noticeable, as evaluated by histomorphometry. The incorporation of BMP-2 resulted in an amount of newly formed bone that was 1.3 times higher than with unloaded scaffolds. The implant site, however, did not have an effect on bone formation as no statistical differences were measured between cortical (diaphysis) and trabecular (condyle) defects. These results indicate the suitability of chemically etched beta-TCP scaffolds as BMP-2 carriers, in the context of bone regeneration.

Comparison of two bone substitute biomaterials consisting of a mixture of fibrin sealant (Tisseel) and MBCP (TricOs) with an autograft in sinus lift surgery in sheep.

OBJECTIVES: The aim of this study was to assess the efficacy and safety of macroporous biphasic calcium phosphate (MBCP())/fibrin grafts (TricOs((R)))/(Tisseel((R))) for sinus lift augmentation in sheep. Autologous bone grafts were used as a positive control, and dental implants were placed to assess the efficiency of the composite. MATERIALS AND METHODS: A total of 12 adult sheep (24 maxillary sinuses) were randomized to receive sinus lift augmentation with MBCP()/fibrin grafts obtained by either simultaneous or sequential addition of thrombin and fibrinogen to MBCP(), or autologous bone grafts. Six months post-sinus lift surgery, dental implants were placed. At 6 months post-sinus lift and 3 months after dental implant placement, the characteristics of newly formed bone and dental implant stability were assessed. The methods used were radiography, scanning electron microscopy, light microscopy, micro-CT analysis, radio frequency analysis (RFA), and image analysis. RESULTS: There were no clinical adverse events in the post-operative period. New bone formation was similar for MBCP()/fibrin grafts and autografts at 21-20% and 20%, respectively, at 6 months, and at 34-35% and 35%, respectively, at 9 months. Implantability of dental implants was better at the time of placement with MBCP()/fibrin grafts than autografts at 81-88% and 69%, respectively. Three months after placement, RFA showed better implantability with MBCP()/fibrin grafts than with autografts at 75-82% and 71%, respectively. The bone contact measurements were around 50% for the three groups, without significant differences. CONCLUSIONS: This study shows that following sinus lift augmentation in sheep, MBCP()/fibrin grafts support new bone formation that is comparable to autografts, while providing better support for the dental implants.

Injectable biphasic calcium phosphate bioceramic: The HYDROS concept.

A new biphasic calcium phosphate ceramic material has been developed in our laboratory. It is composed of 60% of hydroxyapatite and 40% of beta-tricalcium phosphate, based on three granulometries (submicron, round microporous 80-200 mum and macro microporous 0.5-1 mm particles) and hydrated with water leading the formation of a putty filler for bone repair. Biocompatibility and osteogenicity were tested by filling femoral epiphyses critical size bone defect and lumbar muscles in rabbit. After 3, 6 and 12 weeks of implantation, explants were treated for histology. Results revealed the biocompatibility of the material and intensive resorption of the submicron particle fraction followed by important bone ingrowth whereas osteoconduction was provided by the larger particles.

Reconstruction of irradiated bone segmental defects with a biomaterial associating MBCP+(R), microstructured collagen membrane and total bone marrow grafting: an experimental study in rabbits.

The bone tissue engineering models used today are still a long way from any oncologic application as immediate postimplantation irradiation would decrease their osteoinductive potential. The aim of this study was to reconstruct a segmental critical size defect in a weight-bearing bone irradiated after implantation. Six white New Zealand rabbits were immediately implanted with a biomaterial associating resorbable collagen membrane EZ(R) filled and micro-macroporous biphasic calcium phosphate granules (MBCP+(R)). After a daily schedule of radiation delivery, and within 4 weeks, a total autologous bone marrow (BM) graft was injected percutaneously into the center of the implant. All the animals were sacrificed at 16 weeks. Successful osseous colonization was found to have bridged the entire length of the defects. Identical distribution of bone ingrowth and residual ceramics at the different levels of the implant suggests that the BM graft plays an osteoinductive role in the center of the defect. Periosteum-like formation was observed at the periphery, with the collagen membrane most likely playing a role. This model succeeded in bridging a large segmental defect in weight-bearing bone with immediate postimplantation fractionated radiation delivery. This has significant implications for the bone tissue engineering approach to patients with cancer-related bone defects.

A comparison between bone reconstruction following the use of mesenchymal stem cells and total bone marrow in association with calcium phosphate scaffold in irradiated bone.

The purpose of this study was to compare bone reconstruction using either mesenchymal stem cells (MSCs) or total bone marrow (TBM) in association with biphasic calcium phosphate (BCP) granules after irradiation in a rat model. Three weeks after an external irradiation of the hind limbs of rats, four bone defects were created per animal. The defects were filled with either BCP alone, or with a mixture of BCP and TBM, or with a mixture of BCP and MSCs (adipose-derived or bone marrow-derived MSCs). Three weeks after implantations, new-bone formation was assessed. Histological examination showed osteoconductive and osteointegrative properties of BCP in irradiated tissue. The BCP-TBM mixture significantly improved bone ingrowth (p<0.05). The BCP-MSCs mixtures did not provide new-bone formation over and above that induced by BCP alone. This gives grounds for suspecting that there is a link between this result and the cellular and vascular weakness observed in irradiated bone. The BCP-TBM mixture may have induced an increased vascularization of irradiated bone. This could be due to the presence of all components in TBM that were lacking in the BCP-MSCs mixtures. BCP associated with TBM appears to be the most efficient material for bone substitution in irradiated areas.

Bioactive materials in endodontics.

Endodontic treatment in dentistry is a delicate procedure and many treatment attempts fail. Despite constant development of new root canal filling techniques, the clinician is confronted with both a complex root canal system and the use of filling materials that are harmful for periapical tissues. This paper evaluates reported studies on biomaterials used in endodontics, including calcium hydroxide, mineral trioxide aggregate, calcium phosphate ceramics and calcium phosphate cements. Special emphasis is made on promising new biomaterials, such as injectable bone substitute and injectable calcium phosphate cements. These materials, which combine biocompatibility, bioactivity and rheological properties, could be good alternatives in endodontics as root canal fillers. They could also be used as drug-delivery vehicles (e.g., for antibiotics and growth factors) or as scaffolds in pulp tissue engineering.

Bone tissue formation in sheep muscles induced by a biphasic calcium phosphate ceramic and fibrin glue composite.

Some biomaterials are able to induce ectopic bone formation in muscles of large animals. The osteoinductive potential of macro- micro-porous biphasic calcium phosphate (MBCP) ceramic granules with fibrin glue was evaluated by intramuscular implantation for 6 months in six adult female sheep. The MBCP granules were 1-2 mm in size and were composed of hydroxyapatite (HA) and beta-tricalcium phosphate (beta-TCP) in a 60/40 ratio. The fibrin glue was composed of fibrinogen, thrombin and other biological factors. After 6 months of implantation in the dorsal muscles of sheep, the explants were rigid. Histology, back-scattered electron microscopy and micro-computed tomography of the implants indicated that approximately 12% of mineralized bone had formed in between the MBCP granules. The ectopic bone appeared well-mineralized with mature osteocytes and Haversian structures. In addition, the number and thickness of bone trabeculae formed in between the MBCP particles were similar to those measured in trabecular bone in sheep. The overall results therefore confirmed the formation of well-mineralized ectopic bone tissue after intramuscular implantation of MBCP/fibrin glue composites. These bone substitutes exhibiting osteoinductive properties could be used for the reconstruction of large bone defects.

Biomaterials for tissue reconstruction and bone substitution of the ear, nose and throat, face and neck.

The role of biomaterials has become more important in the last 30 years in otorhinolaryngology. Legal directives for their use and, more importantly, indications have been specified. Biomaterials are medical devices, designed for tissue substitution or reconstruction. Approval labeling is issued in the form of European Community certification and postmarketing medical device safety in Europe - completely independent from the US FDA's certification. The indications for biomaterials are generally similar to those of autografts. Their main advantage is that they limit the morbidity caused by autograft harvesting. The benefits are aesthetic, functional or both. The main indications are in otology, sinus surgery, cranio-maxillo-facial traumatology, osteosynthesis and orthognatic surgery, skeletal augmentation and anti-aging surgery, facial prosthetic rehabilitation and laryngology. The research fields are extremely varied (e.g., increased therapeutic properties, drug-delivery systems or tissue engineering). Increasingly, biomaterials are implanted and the surgical success of their use is dependent upon strict legal labeling and well-defined indications.

Interactions of total bone marrow cells with increasing quantities of macroporous calcium phosphate ceramic granules.

The biological properties of synthetic calcium phosphate bioceramics have made them the third choice of material for bone reconstructive surgery, after autologous bone and allografts. Nevertheless, bioceramics lack the osteogenic properties that would allow them to repair large bone defects. One strategy in bone tissue engineering consists of associating a synthetic scaffold with osteogenic cells. Mesenchymal stem cells (MSC) are usually isolated from bone marrow cultured for several weeks and seeded on to a small quantity of bioceramic. We have studied the association of total bone marrow cells, harvested from femurs of rats, with increasing amounts of calcium phosphate ceramic granules (50-250 mg). A cell viability test indicated that a little quantity of bioceramics granules (50 mg) was less detrimental for culturing 1 million nucleated cells from the whole bone marrow population. Cell morphology, viability, adhesion and differentiation were studied after different culture periods. Among the heterogeneous population of bone marrow cells, only a limited amount of cells attached and differentiated on the bioceramics. To explain the influence of the amount of synthetic scaffold on cell viability, media calcium concentrations were measured. Low cell viability could be explained by calcium phosphate precipitation leading to a decrease in calcium concentrations observed with relatively large amounts of scaffold. This study showed that the chemical stability of the ceramic plays a critical role in the viability of bone marrow cells.