Dispersive micro solid phase extraction of glibenclamide from plasma, urine, and wastewater using a magnetic molecularly imprinted polymer followed by its determination by a high-performance liquid chromatography-photodiode array detector.

The present study describes the development of a simple and selective analytical method for dispersive micro solid phase extraction and determination of glibenclamide (GLB) using magnetic molecularly imprinted polymer (MMIP) as a sorbent. MMIP was fabricated by the non-covalent method on the surface of silicated Fe3O4 and had a high affinity for glibenclamide; dual monomers, itaconic acid and allylamine, were used for this. Polymerization was achieved by the precipitation method in the presence of glibenclamide as the template and ethylene glycol dimethacrylate as the cross-linker. The morphology and structural properties of the MMIP were characterized by different analytical methods. To achieve maximum extraction efficiency, influencing parameters were optimized. The linearity range was 1-2000 and 12-2000 µg L-1 by high-performance liquid chromatography-photodiode array detector (HPLC-PDA) and UV-vis spectroscopy, respectively. The detection and quantification limits with UV-vis and HPLC-PDA analyses were 4 and 12 µg L-1 and 0.3 and 1 µg L-1, respectively. Under optimized conditions, recovery of glibenclamide spiked in plasma, human urine, and wastewater was between 89.4 and 102.9% at the concentration levels of 25, 250, and 500 µg L-1; relative standard deviations were below 3.7% by HPLC-PDA. The developed method has a favorable pre-concentration factor of 140.0. Equilibrium data and sorption isotherms fitted well with the Langmuir model. A maximum sorption capacity of 24.260 mg g-1 was acquired based on the Langmuir model. The synthesized sorbent with high selectivity was used to separate GLB from complex biological systems and wastewater before measurement with UV-vis or HPLC-PDA.

Design and manufacture of new hybrid hydrogel and superabsorbent polymer for controlled release of fulvic acid based on grafted xanthan gum/gelatin using electron irradiation and its use in fodder corn cultivation.

A humic acid-gelatin (HA-Gel) hydrogel, a gallic acid-xanthan gum (GA-XG) hydrogel, a HA-Gel/GA-XG hydrogel, and superabsorbent polymer (SAP) of HA-Gel/GA-XG/polyacrylamide (PAM) hydrogel were synthesized using electron beam irradiation method. The capability of synthesized hydrogels in loading and controlled release of fulvic acid (FA) was studied. The chemical and physical structure of sorbents was confirmed by various analyses. The effect of irradiation dose on mechanical properties, gel percentage, swelling, and absorbency under load (AUL) of the sorbents was investigated. By changing the hydrogel structures into the SAP form, its swelling capacity was increased from 37 to 320 g/g. Both hybrid hydrogel and SAP were reusable for up to 7 cycles. The maximum fertilizer loading capacities for SAP and hybrid hydrogel were 402.1 and, 175.5 mg g-1, respectively. In comparison to hydrogels, the SAP showed a slower FA-release performance. Thus, in soil media, 86 % of FA was released in 15-20 days from the hybrid hydrogel while with the SAP, 81 % of FA was released in 30-35 days. The significant improvement in the growth of fodder corn treated with FA-loaded SAP in the greenhouse media in comparison to the control groups showed the effective performance of the designed SAP, favoring its practical applications.

Polyamidoamine with a hyper-branched structure grafted on modified magnetic graphene oxide for the trace separation of diclofenac and acetaminophen followed by high-performance liquid chromatography determination.

Different generations of polyamidoamine dendrimers were synthesized on a focal core of magnetic graphene oxide modified with 3-aminopropyltriethoxysilane. After the characterization of synthesized dendrimers, its second generation was employed as a suitable sorbent for simultaneous separation/preconcentration of diclofenac and acetaminophen by a dispersive magnetic solid phase microextraction. The extracted analytes were then quantified by high-performance liquid chromatography with ultraviolet detection. Under optimized conditions, the limits of detection were 0.3 µg/L for diclofenac and 0.1 µg/L for acetaminophen. The intra-day relative standard deviations at 50 µg L-1 levels were 1.8% for diclofenac and 2.1% for acetaminophen, while the inter-day relative standard deviations were 3.6% and 4.5% for diclofenac and acetaminophen, respectively. The calibration graphs were linear in ranges of 1.0-500.0 µg/L and 0.5-600.0 µg/L for diclofenac and acetaminophen, respectively, with good coefficients of determination (r2 > 0.998). The method was successfully applied to the determination of diclofenac and acetaminophen in water, milk, and biological samples.

Synthesis of magnetic molecular imprinted polymer with a new functional monomer for dispersive micro solid phase extraction of captopril from wastewater and biological samples and determination by UV-Vis spectrophotometry.

A magnetic molecularly imprinted polymer (MMIP) was fabricated for captopril by surface polymerization of Fe3O4@SiO2 nanoparticles using a new functional monomer of N-(allylcarbamothioyl)-2-chlorobenzamide. It was then employed as a selective nanosorbent for dispersive magnetic micro solid phase extraction (DM-µ-SPE) of captopril from biological and wastewater samples. To characterize the physicochemical properties of the MMIP, different analytical methods such as the vibrating sample magnetometer, field emission scanning electron microscopy, Brunauer-Emmett-Teller, and Fourier transform infrared spectroscopy were utilized. To gain the maximum extraction recovery of captopril, the influence of various operating conditions was investigated and experimental settings optimized. After the extraction step, the concentration of captopril was measured by UV-Vis spectrophotometer at 245 nm. The assessments demonstrated that the MMIP provides higher extraction efficiency in comparison to magnetic non-imprinted polymer, suggesting the establishment of selective recognition binding sites at the MMIP surface. The method depicted desirable figures of merit of a low detection limit of 0.16 µg L-1, a limit of quantification of 0.50 µg L-1, a linear dynamic range of 0.50-22.0 µg L-1, and an acceptable preconcentration factor of 333. The magnetic MIP was successfully employed for preconcentration and extraction of trace amounts of captopril in real samples, such as human blood serum, urine, and wastewater samples, with recoveries in the range 95.7 to 102.6% and relative standard deviations < 5%.

A Selective Fluorescent Nanoprobe Based on Graphene Quantum Dots and Hg2+ for the Determination of Tetracycline in Biological Samples.

A simple, sensitive, and selective fluorometric method based on graphene quantum dots and Hg2+ is presented for the determination of tetracycline. The fluorescence emission of graphene quantum dots at 463 nm decreased in the presence of Hg2+ ions due to its electrostatic interaction with the negatively charged surface of quantum dots at pH = 8.0. The addition of tetracycline to this system resulted in the retrieval of the fluorescence emission of the graphene quantum dots proportional to the tetracycline concentration. This is because of the interaction between tetracycline and Hg2+ that results in the release of the quantum dots' surface. Under the optimized conditions, the calibration curve indicated good linearity in the range of 2.0-44.0 nmol L-1 with a detection limit of 0.52 nmol L-1 for tetracycline. The designed nanoprobe was capable of the determination of tetracycline in serum and urine samples.

Selective and Sensitive Fluorometric Determination of Piroxicam Based on Nitrogen-doped Graphene Quantum Dots and Gold Nanoparticles Coated with Phenylalanine.

In this study, a sensitive fluorimetric method is proposed for the determination of piroxicam using nitrogen graphene quantum dots (N-GQDs) and gold nanoparticles coated with phenylalanine. The fluorescence emission of N-GQDs at 440 nm decreases with the increase of gold nanoparticles coated with phenylalanine. However, the addition of piroxicam causes the release of gold nanoparticles from the surface of quantum dots followed by the retrieval of the fluorescence emission of N-GQDs. Under the optimum conditions, the calibration graph was linear in the concentration range of 2.0-35.0 nmol L-1 for piroxicam with a limit of detection of 0.11 nmol L-1. The developed method was successfully applied for the determination of piroxicam in urine and serum samples.

Chemiluminescence determination of dopamine using N, P-graphene quantum dots after preconcentration on magnetic oxidized nanocellulose modified with graphene quantum dots.

A novel sorbent consisting of magnetic oxidized nanocelluloses modified with graphene quantum dots was prepared and used for the separation and preconcentration of dopamine. The eluted dopamine from the sorbent was determined by a designed chemiluminescence system containing luminol, H2O2, Fe3+, and graphene quantum dots doped with nitrogen and phosphorus. Graphene quantum dots cause an increase in the intensity of the chemiluminescence system of luminol-H2O2, but the presence of Fe3+ ions in this system decreases its intensity because of the sorption of the Fe3+ ions on the surface of P, N-graphene quantum dots. However, the addition of dopamine resulted in the retrieval of P, N-graphene quantum dots, as well as the chemiluminescence intensity, due to the formation of its complex with Fe3+. The sorbent made of magnetic oxidized nanocelluloses modified with graphene quantum dots was characterized by various analytical techniques, and the effective parameters on the extraction of dopamine were investigated and optimized. Under the optimized conditions, the method displayed good linearity in the concentration range 0.25-17.5 µg L-1 for dopamine (R2 = 0.9918) with a limit of detection of 0.054 µg L-1. The intra- and inter-day relative standard deviations at a 10.0 µg L-1 concentration level of dopamine (n = 6) were 2.6 and 4.1%, respectively. This method was successfully applied to the extraction and determination of dopamine in human serum and urine samples.

Determination of lamotrigine by fluorescence quenching of N-doped graphene quantum dots after its solid-phase extraction using magnetic graphene oxide.

A sensitive fluorescent nanoprobe is reported for the determination of lamotrigine after its preconcentration by magnetic graphene oxide nanocomposite. The fluorescent nanoprobe is based on the quenching effect of lamotrigine on the nitrogen graphene quantum dots fluorescence at 440 nm, through strong hydrogen bonding. Under optimum conditions, the quenching fluorescent intensity of nitrogen graphene quantum dots shows linearity with the lamotrigine concentration in the range of 2.0-45.0 µg L-1, limits of detection (LOD), and quantification of 0.39 and 1.28 µg L-1 respectively. The parameters affecting the extraction and determination of lamotrigine were optimized via the central composite design (CCD) and one at the time method, respectively. The developed method was successfully employed for the extraction and quantification of lamotrigine in biological samples.

Fabrication of a sensitive colorimetric nanosensor for determination of cysteine in human serum and urine samples based on magnetic-sulfur, nitrogen graphene quantum dots as a selective platform and Au nanoparticles.

A novel colorimetric nanosensor is reported for the selective and sensitive determination of cysteine using magnetic-sulfur, nitrogen graphene quantum dots (Fe3O4/S, N-GQDs), and gold nanoparticles (Au NPs). Thus, S, N-GQDs was firstly immobilized on Fe3O4 nanoparticles through its magnetization in the presence of Fe3+ in the alkali solution. The prepared Fe3O4/S, N-GQDs were dispersed in cysteine solution resulting in its quick adsorption on the surface of the Fe3O4/S, N-GQDs through hydrogen bonding interaction. Then, Au NPs solution was added to this mixture that after a short time, the color of Au NPs changed from red to blue, the intensity of surface plasmon resonance peak of Au NPs at 530 nm decreased, and a new peak at a higher wavelength of 680 nm appeared. The effective parameters on cysteine quantification were optimized via response surface methodology using the central composite design. Under optimum conditions, the absorbance ratio (A680/A530) has a linear proportionality with cysteine concentration in the range of 0.04-1.20 µmol L-1 with a limit of detection of 0.009 µmol L-1. The fabrication of the reported nanosensor is simple, fast, and is capable of efficient quantification of ultra traces of cysteine in human serum and urine real samples.

Carbon dots doped by nitrogen and sulfur for dual-mode colorimetric and fluorometric determination of Fe3+ and histidine and intracellular imaging of Fe3+ in living cells.

The first dual-modality highly intensive fluorescent and colorimetric nanoprobe for Fe3+ ions and histidine is reported. The carbon dots doped by nitrogen and sulfur (N,S-CDs) prepared by the one-pot hydrothermal method have an excitation/emission wavelength of 320/420 nm with 56% quantum yield. N,S-CDs exhibit strong visible fluorescence with high stability at pH ~ 7.0. The fluorescence intensity of the N,S-CDs is quenched in the presence of Fe3+ ions which are recovered upon the addition of histidine. The addition of Fe3+ ions also induces a color change from yellow to red. Using colorimetric determination, Fe3+ and histidine exhibited linearity in the range 75-675 and 100-375 µmol L-1, respectively, while with fluorometric determinations the dynamic range was 0.1-275 and 0.1-3 µmol L-1 for Fe3+ and histidine, respectively. The limits of detection were 19 nmol L-1 and 0.03 µmol L-1 using fluorometry and 20 µmol L-1 and 24.2 µmol L-1 using colorimetry, for Fe3+ and histidine respectively. The relative standard deviations (n = 5) for Fe3+ (10 µmol L-1) and histidine (1 µmol L-1) using fluorometry were 4.6 and 7.3% and using colorimetry at 100 µmol L-1 of Fe3+ and 150 µmol L-1 of histidine were 3.2 and 5.6%, respectively. The developed fluorometric method was applied for the determination of Fe3+ and histidine in various foods and biological fluid samples as well as intracellular imaging of iron. The accuracy of the method for iron determination was confirmed by the analysis of certified reference materials (wheat flour, tomato leaves, and whole milk powder) and quality control materials (whole milk powder, serum, and urine), whereas for histidine, the accuracy was determined by recovery experiment and independent analysis. Good recovery values in ranges of 92-96% and 94-98% were achieved for Fe3+ and histidine, respectively. Graphical abstract.

Dispersive solid-phase extraction of buprenorphine from biological fluids using metal-organic frameworks and its determination by ultra-performance liquid chromatography.

In this work, various types of metal-organic frameworks were synthesized, and their affinities toward buprenorphine were evaluated using dispersive solid-phase extraction. The extracted buprenorphine was determined by ultra high performance liquid chromatography-ultraviolet detection system. The highest extraction recovery was observed by employing zeolitic imidazole framework-67. Then, a facile and fast extraction method was designed for the extraction and purification of the target drug. Optimization of the extraction method was carried out by the design of experiment approach. A linearity range of 1-1000 µg/L with the limit of detection of 0.15 µg/L and relative standard deviations (50 µg/L, n = 5) of 3.4% was obtained for standard sample analysis. Under optimized experimental and instrumental conditions, the relative recoveries were in the range of 95 to 111%. Eventually, zeolitic imidazole framework-67 was successfully employed for the extraction and determination of buprenorphine in the biological fluids with satisfactory results.

Design of a pseudo stir bar sorptive extraction using graphenized pencil lead as the base of the molecularly imprinted polymer for extraction of nabumetone.

Molecularly imprinted polymer (MIP) was synthesized through the coprecipitation method on the graphene oxide anchored pencil lead as a substrate for the first time and applied as an efficient sorbent for pseudo stir bar sorptive extraction of nabumetone. The extracted analyte was determined by a novel spectrophotometric method based on the aggregation of silicate sol-gel stabilized silver nanoparticles in the presence of the analyte. The synthesized polymer was characterized using Fourier transform infrared spectroscopy and field emission scanning electron microscopy. Optimization of important parameters affecting the extraction efficiency was done using central composite design whereas the spectrophotometric method was optimized via one at a time variable. Under the optimal conditions, the calibration curve exhibited linearity in the concentration range of 1.5-20.0 µg L-1. A limit of detection of 0.20 µg L-1, an enhancement factor of 393 and relative standard deviations (at 10 µg L-1, n = 6) of 4.6% and 8.1% for intra- and inter-day analysis were obtained. The developed procedure was successfully utilized for the quantification of traces of nabumetone in tap water and biological samples with the complex matrix including human urine and serum.

Doxycycline drug delivery using hydrogels of O-carboxymethyl chitosan conjugated with caffeic acid and its composite with polyacrylamide synthesized by electron beam irradiation.

Two hydrogels of O-carboxymethyl chitosan conjugated with caffeic acid and its composite with polyacrylamide were synthesized using electron beam irradiation. The synthesized hydrogels were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and mechanical properties studies. The hydrogels were loaded with doxycycline by swelling and its release was investigated in various media. The effect of the dose of electron beam irradiation and PAAm amount on the properties of hydrogels including swelling, drug loading, drug release, mechanical properties, and gel content were studied. The release of doxycycline form hydrogels in different media obeyed the mechanism of non-Fickian diffusion and best fitted to the Higuchi model and Korsmeyer-Peppas. In-vitro doxycycline release consideration indicated that the drug's release from composite hydrogel occurs with higher amounts than the other one. The cytotoxic study confirmed the non-toxicity of the prepared hydrogels dressing. Moreover, the growth inhibition of permissive bacteria against Staphylococcus aureus and Escherichia coli were observed for doxycycline-loaded hydrogels. So, the synthesized hydrogels are appropriate for practical application as a new antibacterial wound dressing.

Selective fluorometric determination of sulfadiazine based on the growth of silver nanoparticles on graphene quantum dots.

A sensitive fluorometric assay is described for the direct determination of the antibiotic sulfadiazine. Silver nanoparticles placed on graphene quantum dots (Ag NP-GQDs) were synthesized by reduction of AgNO3 with sodium borohydride in the presence of GQDs. The growth of Ag NPs on the surface of the GQDs causes quenching of the blue fluorescence of the GQDs with an emission maximum at 470 nm by surface-enhanced energy transfer. If sulfadiazine is added, it interacts with Ag NPs and fluorescence is restored. Under optimal conditions, the fluorescence increases linearly in the sulfadiazine concentration range of 0.04-22.0 µM. The detection limit is 10 nM with relative standard deviations of 2.3 and 4.2 (at 10 µM of sulfadiazine; for n = 6) for intra- and inter-day assays. Graphical abstractSchematic representation of sulfadiazine determination using Ag NP-GQDs as a fluorescent nanoprobe.

Surface molecularly imprinted polymer on magnetic multi-walled carbon nanotubes for selective recognition and preconcentration of metformin in biological fluids prior to its sensitive chemiluminescence determination: Central composite design optimization.

Novel molecularly imprinted polymer (MIP) for metformin was synthesized on the surface of magnetic multi-walled carbon nanotubes (MMWCNTs) as the support. Metformin was used as the template, methacrylic acid (MAA) as the functional monomer, ethylene glycol dimethacrylate (EGDMA) as the cross-linker and 2,2'-azoisobutyronitrile (AIBN) as the initiator. The synthesized composite was characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FTIR). The surface molecularly imprinted composite was used for magnetic solid phase microextraction (MSPME) of metformin before its chemiluminescence (CL) determination and its capability was compared with non-imprinted polymer (NIP). The central composite design was used for optimization as well as consideration of possible interaction of effective variables on extraction. Under the optimized conditions, the developed method exhibited the linear dynamic range of 0.5-50.0 µg L-1 with a detection limit of 0.13 µg L-1 and enhancement factor of 195.3 for the preconcentration of 100 mL of the sample and 500 µL of an eluent. The intra- and inter-day relative standard deviations (RSD%) at 5.0 µg L-1 level of metformin (n = 6) were 3.7 and 4.9%, respectively. The maximum adsorption capacity of the sorbent was found to be 80.0 mg g-1, the adsorption of metformin was endothermic and spontaneous and followed the Langmuir isotherm model. The adsorption kinetic was also found to be best fitted with the pseudo-second-order model. The designed method was successfully applied to the extraction and determination of metformin in biological fluids and water samples.

Electron beam irradiation synthesis of porous and non-porous pectin based hydrogels for a tetracycline drug delivery system.

Electron beam irradiation was used for the synthesize of porous and non-porous pectin based hydrogels through conjugation of pectin with 5-hydroxytryptophan in the presence and absence of sodium dodecyl sulfate, respectively. The hydrogels were characterized by different methods. Tetracycline hydrochloride was loaded on the hydrogels by swelling equilibrium method and its release in different media was studied. The effect of SDS amount and electron beam irradiation dose on the swelling, drug loading, drug release, gel content, and mechanical properties were investigated. The release of drug form both hydrogels followed non-Fickian diffusion mechanism and was best fitted with the Korsmeyer-Peppas model. In vitro, drug release studies revealed that the release of drug from non-porous hydrogel is relatively slow while its release from porous hydrogel occurs with higher amounts and faster rate. Biocompatibility and cytotoxic analysis indicate that the prepared hydrogels dressing are non-thrombogenic, non-hemolytic and non-toxic. Furthermore, acceptable bacteria growth inhibition against Escherichia coli and Staphylococcus aureus were observed for both drug-loaded hydrogels. Thus, these hydrogels are suitable for the application of an antibacterial wound dressing.

Non-enzymatic sensing of dopamine by localized surface plasmon resonance using carbon dots-functionalized gold nanoparticles.

A highly selective, sensitive, and rapid colorimetric sensor for the determination of dopamine (DA) was developed using the color change of S-doped carbon dots functionalized gold nanoparticles (S-CDs@Au NPs). The base of the method is the formation of a complex between the amine groups of dopamine with carboxylic groups of S-CDs@Au NPs followed by their aggregation with Fe3+ ions which acts as the linkers causing a red shift from 520 to 670 nm in the localized surface plasmon peak of S-CDs@Au NPs. The ratio of absorbance intensity at 670 nm to 520 nm was monitored as the analytical signal for determination of dopamine. The parameters affecting the analytical signal including reaction time, solution pH, the concentration of Au NPs and concentration of Fe3+ were optimized. At optimized conditions, the calibration curve was linear in the concentration range of 0.81-16.80 µM of dopamine. The detection and quantification limits were 0.23 µM and 0.77 µM, respectively. The intra-day and inter-day relative standard deviation (RSDs) at 5.0 µM of DA were 3.9% and 5.6%, respectively (n = 5). The applicability of the method for determination of DA in dopamine ampoule, urine and serum human samples was investigated.

A novel theranostic system of AS1411 aptamer-functionalized albumin nanoparticles loaded on iron oxide and gold nanoparticles for doxorubicin delivery.

Recently DNA aptamers have attracted remarkable attention as possible targeting ligands since selective targeting of cancer cells is a critical step in cancer diagnosis and therapy. Here, the development of AS1411 aptamer-functionalized albumin nanoparticles loaded on iron oxide and gold nanoparticles is reported for target delivery of the well-known anticancer drug of doxorubicin (Dox). Iron oxide nanoparticles (IONPs) and gold nanoparticles (GNPs) were prepared by ultrasound-assisted and controlled seeded growth synthetic methods, respectively. The nanocarrier was synthesized by a desolvation cross-linking method and characterized by dynamic light scattering, zeta potential measurement, thermogravimetric analysis, transmission electron microscopy, as well as vibrating sample magnetometer. The synthesized nanoparticles were found to be spherical with an average diameter of 120 nm and zeta potential of about -50.3 mV. The in-vitro anti-tumor effect of the designed delivery vehicle on MCF7 and SKBR3 human cancer cells was evaluated by MTT assay. The experimental results revealed that it could significantly inhibit the proliferation of cancerous cells. Moreover, GNPs and IONPs with the coating of albumin did not show any toxicity. AS1411 aptamer-functionalized nanoparticles improved cellular uptake and efficiency to MCF7 breast cancer cells as compared to non-targeting nanoparticles because of the high affinity of mentioned aptamer toward the overexpressed nucleolin on MCF7 cell surface.

Simultaneous Functionalization and Reduction of Magnetic Graphene Oxide by L-Histidine and its Application for Magnetic Separation/Preconcentration of Antioxidant Trace Elements.

In the present study, for the first time, the magnetic graphene oxide was simultaneously functionalized and reduced with the aim of imidazole-based L-histidine amino acid (rGO/Fe3O4-histidine). The prepared nanocomposite was characterized by field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, Raman spectroscopy, and vibrating sample magnetometer. The synthesized rGO/Fe3O4-histidine nanosheets were implied for solid phase extraction of ultra-trace amounts of Zn2+, Cu2+, and Mn2+ from biological samples prior to ICP-OES determination. The calibration curves were linear in the concentration ranges of 0.4-182.0, 0.4-215.0, and 0.2-168.5 µg L-1 for Zn2+, Cu2+, and Mn2+, respectively. The limits of detection were 0.12, 0.10, and 0.04 µg L-1 for Zn2+, Cu2+, and Mn2+, respectively. The relative standard deviations (RSDs) at 50.0 µg L-1 for single-sorbent repeatability and sorbent-to-sorbent reproducibility were less than 6.7 and 9.2% (n = 5), respectively. The accuracy of the method was confirmed by the analysis of a serum quality control material (QCM, Seronorm™ Human Serum REF NO 203105) and hair certified reference material (CRM, Human Hair IAEA-086).

Synthesis of composite hydrogel of glutamic acid, gum tragacanth, and anionic polyacrylamide by electron beam irradiation for uranium (VI) removal from aqueous samples: Equilibrium, kinetics, and thermodynamic studies.

A bio-compatible hydrogel sorbent was prepared through chemical conjugation of glutamic acid (GA) with gum tragacanth (GT) followed by mixing with anionic polyacrylamide (PAAm) and irradiating by the electron beam. The prepared composite of the hydrogel of GA-GT/PAAm was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, point zero charge (PZC) analysis, thermogravimetric analysis (TGA), and X-ray diffraction-(XRD). The sorption capability of the hydrogel was investigated for the removal of U(VI) from aqueous samples. The sorption data were analyzed by Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) models and the experimental results were in agreement with Langmuir isotherm. The sorption process was found to be endothermic and spontaneous. The maximum sorption capacity of the composite of GA-GT/PAAm hydrogel for U(VI) determined from Langmuir isotherm was 384.6 mg g-1. The experimental data were also analyzed by four different kinetic equations, and the results were fitted well with the pseudo-second-order model.