Tuning the Optical Properties Through Hydrogen Bond-assisted H-aggregate Formation: The ODIN Case.

The current work focuses on the investigation of two functionalized naphthyridine derivatives, namely ODIN-EtPh and ODIN-But, to gain insights into the hydrogen bond-assisted H-aggregate formation and its impact on the optical properties of ODIN molecules. By employing a combination of X-ray and electron crystallography, absorption and emission spectroscopy, time resolved fluorescence and ultrafast pump-probe spectroscopy (visible and infrared) we unravel the correlation between the structure and light-matter response, with a particular emphasis on the influence of the polarity of the surrounding environment. Our experimental results and simulations confirm that in polar and good hydrogen-bond acceptor solvents (DMSO), the formation of dimers for ODIN derivatives is strongly inhibited. The presence of a phenyl group linked to the ureidic unit favors the folding of ODIN derivatives (forming an intramolecular hydrogen bond) leading to the stabilization of a charge-transfer excited state which almost completely quenches its fluorescence emission. In solvents with a poor aptitude for forming hydrogen bonds, the formation of dimers is favored and gives rise to H aggregates, with a consequent considerable reduction in the fluorescence emission. The urea-bound phenyl group furtherly stabilizes the dimers in chloroform.

Binding of Acetylated Lysine by Using a Water Soluble Aryl Extended Calix[4]pyrrole.

Post-translational modifications of lysine in histones, as methylation and acetylation, have well established functions in epigenetics and are emerging as important actors in broader biological regulation. Currently, the detection of acetylated lysine (Kac) in water solution as free amino acid or protein residue remains challenging. Acetylated lysine is a neutral amino acid, and the lack of ion-dipole interactions causes the decrease in binding affinity displayed by synthetic molecular receptors with respect to the other lysine modifications. Here, we report molecular modeling calculations and 1H NMR experiments to investigate the binding properties of two different calix[4]pyrrole receptors towards Kac. Computational analyses reveal that tetra-aryl-extended calix[4]pyrrole (1) preferentially binds the cis-Kac conformer over the trans one due to steric considerations and more favorable interactions. Experimental 1H NMR titration experiments confirm the formation of a 1 : 1 complex between receptor 1 and cis-Kac, with a Ka exceeding 103 M-1. Conversely, the super-aryl-extended calix[4]pyrrole 2 is less efficient in binding Kac, due to unfavorable solvation/desolvation effects, as proven by 1H NMR experiments. Moreover, receptor 1 showed a higher affinity for Kac over other lysine modifications, such as methylated lysines.

Two-photon microscopy as a visual tool for polymer compatibilization monitoring: the PE-EVOH case.

In this study, we present two-photon microscopy (2PM) as an original technique to investigate the compatibilization between PE-HEMA and EVOH at the sub-micrometer level, both on the surface and in the bulk. 2PM is a nonlinear fluorescence imaging technique commonly exploited for thick biological tissue analysis. Here, we use 2PM to visualize polymer blending through 3D images of the obtained films. Compatibilization was performed in solution, upon functionalization of PE-HEMA with 1.4% molar of ODIN, a fluorescent molecule able to form multiple hydrogen bonds with EVOH and to act as a fluorescent probe. Different blends were synthesized, and the obtained films were analyzed by 2PM. For all compositions, it was demonstrated that ODIN is evenly distributed both on the surface and in the bulk. 2PM analysis of the thermally reprocessed specimen revealed that repeated reprocessing allows the reformation of ODIN dimers as the most stable H-bonding array in the solid state, partially reversing the compatibilization.

Selective NMR detection of N-methylated amines using cavitand-decorated silica nanoparticles as receptors.

We report a strategy for the realization of NMR chemosensors based on the spontaneous self-assembly of lower rim pyridinium-functionalized tetraphopshonate cavitands on commercial silica nanoparticles. These nanohybrids enable the selective detection of physiologically relevant N-methylated amines, with a limit of detection of 31 µM, via STD-based NMR experiments, achieving for the first time fine structural selectivity in nanoparticle-assisted NMR chemosensing.

Selective and Reversible Solvent Uptake in Tetra-4-(4-pyridyl)phenylmethane-based Supramolecular Organic Frameworks.

The dynamic behavior of supramolecular organic frameworks (SOFs) based on the rigid tetra-4-(4-pyridyl)phenylmethane (TPPM) organic tecton has been elucidated through 3D electron diffraction, X-ray powder diffraction and differential scanning calorimetry (DSC) analysis. The SOF undergoes a reversible single-crystal-to-single-crystal transformation when exposed to vapours of selected organic solvents, moving from a closed structure with isolated small voids to an expanded structure with solvated channels along the b axis. The observed selectivity is dictated by the fitting of the guest in the expanded SOF, following the degree of packing coefficient. The effect of solvent uptake on TPPM solid-state fluorescence was investigated, evidencing a significant variation in the emission profile only in the presence of chloroform.

Cavitand Decorated Silica as a Selective Preconcentrator for BTEX Sensing in Air.

The monitoring of benzene and other carcinogenic aromatic volatile compounds at the ppb level requires boosting both the selectivity and sensitivity of the corresponding sensors. A workable solution is the introduction in the devices of preconcentrator units containing molecular receptors. In particular, quinoxaline cavitands (QxCav) resulted in very efficient preconcentrator materials for the BTEX in air to the point that they have been successfully implemented in a commercial sensor. In this work, we report a highly efficient quinoxaline-based preconcentrator material, in which the intrinsic adsorption capacity of the QxCav has been maximized. The new material consists of silica particles covalently coated with a suitable functionalized QxCav derivative (QxCav@SiO2). In this way, all the cavities are exposed to the analyte flux, boosting the performance of the resulting preconcentration cartridge well above that of the pure QxCav. It is noteworthy that the preconcentrator adsorption capacity is independent of the relative humidity of the incoming air.

Tuning the conformational flexibility of quinoxaline cavitands for complexation at the gas-solid interface.

The selectivity and efficiency of benzene and toluene uptake at the gas-solid interface by quinoxaline cavitands is strongly enhanced by partial rigidification of the receptor cavity and immobilization of the cavitand onto silica gel particles.

Encapsulation of Trimethine Cyanine in Cucurbit[8]uril: Solution versus Solid-State Inclusion Behavior.

Inclusion of polymethine cyanine dyes in the cavity of macrocyclic receptors is an effective strategy to alter their absorption and emission behavior in aqueous solution. In this paper, the effect of the host-guest interaction between cucurbit[8]uril (CB[8]) and a model trimethine indocyanine (Cy3) on dye spectral properties and aggregation in water is investigated. Solution studies, performed by a combination of spectroscopic and calorimetric techniques, indicate that the addition of CB[8] disrupts Cy3 aggregates, leading to the formation of a 1 : 1 host-guest complex with an association constant of 1.5×106  M-1 . At concentrations suitable for NMR experiments, the slow formation of a supramolecular polymer was observed, followed by precipitation. Single crystals X-ray structure elucidation confirmed the formation of a polymer with 1 : 1 stoichiometry in the solid state.

Reusable Cavitand-Based Electrospun Membranes for the Removal of Polycyclic Aromatic Hydrocarbons from Water.

The removal of toxic and carcinogenic polycyclic aromatic hydrocarbons (PAHs) from water is one of the most intractable environmental problems nowadays, because of their resistance to remediation. This work introduces a highly efficient, regenerable membrane for the removal of PAHs from water, featuring excellent filter performance and pH-driven release, thanks to the integration of a cavitand receptor in electrospun polyacrylonitrile (PAN) fibers. The role of the cavitand receptor is to act as molecular gripper for the uptake/release of PAHs. To this purpose, the deep cavity cavitand BenzoQxCav is designed and synthetized and its molecular structure is elucidated via X-Ray diffraction. The removal efficiency of the new adsorbent material toward the 16 priority PAHs is demonstrated via GC-MS analyses at ng L-1 concentration. A removal efficiency in the 32%, to 99% range is obtained. The regeneration of the membrane is performed by exploiting the pH-driven conformational switching of the cavitand between the vase form, where the PAHs uptake takes place, to the kite one, where the PAHs release occurs. The absorbance and regeneration capability of the membrane are successfully tested in four uptake/release cycles and the morphological stability.

Selective discrimination and classification of G-quadruplex structures with a host-guest sensing array.

The secondary structures of nucleic acids have an important influence on their cellular functions but can be difficult to identify and classify quickly. Here, we show that an arrayed suite of synthetic hosts and dyes is capable of fluorescence detection of oligonucleotide secondary structures. Multivariate analysis of different fluorescence enhancements-generated using cationic dyes that show affinity for both DNA G-quadruplexes and the synthetic hosts-enables discrimination between G-quadruplex structures of identical length and highly similar topological types. Different G-quadruplexes that display the same folding topology can also be easily differentiated by the number of G-quartets and sequence differences at the 3' or 5' ends. The array is capable of both differentiation and classification of the G-quadruplex structures at the same time. This simple non-invasive sensing method does not require the discovery and synthesis of specific G-quadruplex binding ligands, but employs a simple multicomponent approach to ensure wide applicability.

Multidentate, V-Shaped Pyridine Building Blocks as Tectons for Crystal Engineering.

The formation of supramolecular structural units through self-assembly is a powerful method to design new architectures and materials endowed with specific properties. With the aim of adding a group of versatile tectons to the toolkit of crystal engineers, we have devised and synthesised four new V-shaped building blocks characterised by an aryl acetylene scaffold comprising three substituted pyridine rings connected by two triple bonds. The judicious choice of different substituents on the pyridine rings provides these tectons with distinctive steric, electrostatic and self-assembly properties, which influence their crystal structures and their ability to form co-crystals. Co-crystals of the tectons with tetraiododifluorobenzene were obtained both via traditional and mechanochemical crystallisation strategies, proving their potential use in crystal engineering. The energetic contributions of the supramolecular interactions at play in the crystal lattice have also been evaluated to better understand their nature and strength and to rationalise their role in designing molecular crystals.

Mechanically-Driven Vase-Kite Conformational Switch in Cavitand Cross-Linked Polyurethanes.

The eligibility of tetraquinoxaline cavitands (QxCav) as molecular grippers relies on their unique conformational mobility between a closed (vase) and an open (kite) form, triggered in solution by conventional stimuli like pH, temperature and ion concentration. In the present paper, the mechanochemical conformational switching of ad hoc functionalized QxCav covalently embedded in an elastomeric polydimethylsiloxane and in a more rigid polyurethane matrix is investigated. The rigid polymer matrix is more effective in converting mechanical force into a conformational switch at the molecular level, provided that all four quinoxaline wings are covalently connected to the polymer.

Solvent-responsive cavitand lanthanum complex.

Stimuli-responsive supramolecular assemblies are dynamic systems that can reversibly switch between different states upon external stimuli. In this context, metal coordination offers a reliable strategy for the preparation of stimuli responsive supramolecular architectures. Herein we report the preparation of a solvent-responsive cavitand-lanthanum coordination complex. A tetra-phosphonate cavitand has been functionalized with four hydroxyl moieties at the upper rim to form a pre-organized octadentate ligand capable of binding lanthanum salts. Exploiting the orthogonal recognition sites, two different complex architectures are formed in acetonitrile and acetone, respectively. The complexes have been characterized in solution by NMR spectroscopy, ITC experiments, while at the solid state, the single crystal structure of the acetonitrile derivative has been determined. Furthermore, as observed by DOSY-NMR spectroscopy, small quantities of acetone in acetonitrile are sufficient to trigger assembly interconversion.

Velcrand Functionalized Polyethylene.

Velcrands are a specific class of cavitands whose complementary surfaces induce self-dimerization. The insertion of a velcrand as physical cross-linking unit into a polymer is reported. To this purpose, the velcrand was functionalized at the lower rim with an isocyanate group. The functional velcrand was reacted with poly (ethylene-co-(2-hydroxethylmethacrylate)) (PE-HEMA), a polymer equipped with free hydroxyl groups suitable for reaction with the isocyanate group. The obtained functionalized polymer was characterized by nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR), proving the introduction of velcraplexes in the polymer. Films with varying amounts of velcrands were obtained by solution casting and slow evaporation, testifying the processability of the functionalized polymers. The obtained films were used to measure the oxygen barrier properties of the functionalized material.

A new, deep quinoxaline-based cavitand receptor for the complexation of benzene.

We report the synthesis of a new macrocyclic receptor, namely 2,8,14,20-tetra-hexyl-4,24:6,10:12,16:18,22-O,O'-tetra-kis-[2,3-di-hydro-[1,4]dioxino[2,3-g]quinoxalin-7,8-di-yl]resorcin[4]arene, DeepQxCav, obtained by the addition of ethyl-ene glycol di-tosyl-ate to an octa-hydroxy quinoxaline cavitand. A 1:1 supra-molecular complex of this cavitand with benzene has been obtained and analysed through X-ray diffraction analysis. The complex, of general formula C92H88O16N8·C6H6, crystallizes in the space group C2/c, with the cavitand host located about a twofold rotation axis. The benzene guest, which is held inside the cavity by C-H⋯π inter-actions and dispersion forces, is disordered over two equivalent sites, one in a general position and one lying on a twofold axis. The crystal structure features C-H⋯O hydrogen bonds and C-H⋯π inter-actions involving the alkyl chains, the aromatic rings, and the O atoms of the dioxane moiety of the resorcinarene scaffold. The crystal studied was refined as a two-component twin.

Hyphenation of a MEMS based pre-concentrator and GC-IMS.

A micro-electro-mechanical system (MEMS) based pre-concentrator filled with a standard Tenax TA adsorbent as well as with a synthetic receptor designed to adsorb 3-hydroxy-3-methylhexanoic acid (3H3MHA), a particular metabolite only available from human beings, was adapted to a custom made ion mobility spectrometer with gas-chromatographic pre-separation (GC-IMS). This combination was compared to a traditional sample loop GC-IMS. The application of a pre-concentrator is highly beneficial for the GC-IMS as analysing technique. By variation of the adsorbed sample volume, the system can be adapted to changing sample concentration ranges easily, thus increasing sensitivity significantly. Detection limits of few hundred ppqV could be obtained in this work for eucalyptol and 3 human metabolites (benzaldehyde, 2-ethyl-1-hexanol and decanal) as exemplary analytes. Moreover, the appropriate choice of selective pre-concentration phases in the pre-concentrator enables an adaptation of sampling to the composition of the mixture. Relevant compounds in very low concentrations can be amplified by using specially designed cavitands while interfering substances could be suppressed. This was successfully demonstrated by detecting 3H3MHA, a compound exclusively available in human sweat, which can be used to locate trapped or hidden individuals.

Probing the Structural Determinants of Amino Acid Recognition: X-Ray Studies of Crystalline Ditopic Host-Guest Complexes of the Positively Charged Amino Acids, Arg, Lys, and His with a Cavitand Molecule.

Crystallization of tetraphosphonate cavitand Tiiii[H, CH3, CH3] in the presence of positively charged amino acids, namely arginine, lysine, or histidine, afforded host-guest complex structures. The X-ray structure determination revealed that in all three structures, the fully protonated form of the amino acid is ditopically complexed by two tetraphosphonate cavitand molecules. Guanidinium, ammonium, and imidazolium cationic groups of the amino acid side chain are hosted in the cavity of a phosphonate receptor, and are held in place by specific hydrogen bonding interactions with the P=O groups of the cavitand molecule. In all three structures, the positively charged α-ammonium groups form H-bonds with the P=O groups, and with a water molecule hosted in the cavity of a second tetraphosphonate molecule. Furthermore, water-assisted dimerization was observed for the cavitand/histidine ditopic complex. In this 4:2 supramolecular complex, a bridged water molecule is held by two carboxylic acid groups of the dimerized amino acid. The structural information obtained on the geometrical constrains necessary for the possible encapsulation of the amino acids are important for the rational design of devices for analytical and medical applications.

Fluorinated Tetraphosphonate Cavitands.

Two synthetic protocols for the introduction of fluorine atoms into resorcinarene-based cavitands, at the lower and upper rim, respectively, are reported. Cavitand 1, bearing four fluorocarbon tails, and cavitand 2, which presents a fluorine atom on the para position of a diester phosphonate phenyl substituent, were synthesized and their complexation abilities toward the model guest sarcosine methyl ester hydrochloride were evaluated via NMR titration experiments. The effect of complexation on the 19F NMR resonance of the probe is evident only in the case of cavitand 2, where the inset of the cation-dipole and H-bonding interactions between the P=O bridges and the guest is reflected in a sizable downfield shift of the fluorine probe.

Biochemical sensing with macrocyclic receptors.

Preventive healthcare asks for the development of cheap, precise and non-invasive sensor devices for the early detection of diseases and continuous population screening. The actual techniques used for diagnosis, e.g. MRI and PET, or for biochemical marker sensing, e.g. immunoassays, are not suitable for continuous monitoring since they are expensive and prone to false positive responses. Synthetic supramolecular receptors offer new opportunities for the creation of specific, selective and cheap sensor devices for biological sensing of specific target molecules in complex mixtures of organic substances. The fundamental challenges faced in developing such devices are the precise transfer of the molecular recognition events at the solid-liquid interface and its transduction into a readable signal. In this review we present the progress made so far in turning synthetic macrocyclic hosts, namely cyclodextrins, calixarenes, cucurbiturils and cavitands, into effective biochemical sensors and the strategies utilized to solve the above mentioned issues. The performances of the developed sensing devices based on these receptors in detecting specific biological molecules, drugs and proteins are critically discussed.

Cucurbit[7]uril-Dimethyllysine Recognition in a Model Protein.

Here, we provide the first structural characterization of host-guest complexation between cucurbit[7]uril (Q7) and dimethyllysine (KMe2 ) in a model protein. Binding was dominated by complete encapsulation of the dimethylammonium functional group. While selectivity for the most sterically accessible dimethyllysine was observed both in solution and in the solid state, three different modes of Q7-KMe2 complexation were revealed by X-ray crystallography. The crystal structures revealed also entrapped water molecules that solvated the ammonium group within the Q7 cavity. Remarkable Q7-protein assemblies, including inter-locked octahedral cages that comprise 24 protein trimers, occurred in the solid state. Cucurbituril clusters appear to be responsible for these assemblies, suggesting a strategy to generate controlled protein architectures.