Frequency of Accessory Maxillary Ostium in Patients With/Without Sinusitis, and Its Correlation with Anatomical Variations of Paranasal Sinuses: A Cone Beam Computed Tomography Study.

This study assessed the frequency of accessory maxillary ostium (AMO) in patients with/without sinusitis and its correlation with anatomical variations using cone-beam computed tomography (CBCT). In this cross-sectional study, 244 CBCT scans were evaluated in two groups: with maxillary sinusitis having > 2 mm mucosal thickening and without max sinusitis as a normal group having normal or less than 2 mm mucosa. The CBCT scans of each group were carefully evaluated for the presence/absence of AMO, patency/obstruction of the primary maxillary ostium (PMO), and the presence of anatomical variations of the paranasal sinuses. Data were analyzed by independent t-test, Pearson Chi-square test, and Fisher's exact test (alpha = 0.05). CBCT scans of 134 females (54.9%) and 110 males (45.1%) with a mean age of 34.16 ± 19.01 years were evaluated. The presence of AMO had no significant correlation with maxillary sinusitis (P = 0.104). The two groups had no significant difference in the frequency of Haller cell, nasal septal deviation, and concha bullosa (P > 0.05). However, the frequency of paradoxical concha (PC; P < 0.001) and bifid concha (BC; P = 0.017) was significantly higher in the normal group, and the frequency of PMO obstruction was significantly higher in the sinusitis group (P < 0.001). AMO had no significant correlation with any anatomical variation in any group (P > 0.05). Gender had a significant effect on the presence of AMO (P = 0.013). The presence of AMO had no significant correlation with maxillary sinusitis. However, its frequency was significantly higher in females in normal group and males with sinusitis. The presence of AMO had no significant correlation with anatomical variations.

Virtual Three-Dimensional Model Analysis in the Assessment of the Maxillary and Mandibular Donor Sites on Cone-Beam Computed Tomography Images.

Using the Mimics software to assess the maxillary and mandibular donor sites on cone-beam computed tomography (CBCT) images. This cross-sectional study was conducted on 80 CBCT scans. Data in DICOM format were transferred to the Mimics software version 21, and a maxillary and a mandibular mask according to cortical and cancellous bones were virtually created for each patient based on Hounsfield units (HUs). Three-dimensional models were reconstructed, and boundaries of donor sites, including mandibular symphysis, ramus, coronoid process, zygomatic buttress, and maxillary tuberosity, were defined. Virtual osteotomy was conducted on the 3D models to harvest bone. The volume, thickness, width, and length of harvestable bone from each site were quantified by the software. Data were analyzed by independent t-test, one-way ANOVA, and Tukey's test (alpha = 0.05). The greatest harvestable bone volume and length differences were observed between ramus and tuberosity (P < 0.001). The maximum and minimum harvestable bone volumes were found in symphysis (1753.54 mm3) and tuberosity (84.99 mm3). The greatest difference in width and thickness was noted between the coronoid process and tuberosity (P < 0.001) and symphysis and buttress (P < 0.001), respectively. Harvestable bone volume from tuberosity, length, width, volume from symphysis, and volume and thickness from the coronoid process was significantly greater in males (P < 0.05). The harvestable bone volume was the highest in symphysis, followed by ramus, coronoid, buttress, and tuberosity. The harvestable bone length and width were the highest in the symphysis and coronoid process, respectively. Maximum harvestable bone thickness was found in symphysis.

Diagnostic performance of stitched and non-stitched cross-sectional cone-beam computed tomography images of a non-displaced fracture of ovine mandibular bone.

Purpose: This study assessed the diagnostic performance of stitched and non-stitched cross-sectional cone-beam computed tomography (CBCT) images of non-displaced ovine mandibular fractures. Materials and Methods: In this ex vivo study, non-displaced fractures were artificially created in 10 ovine mandibles (20 hemi-mandibles) using a hammer. The control group comprised 8 hemi-mandibles. The non-displaced fracture lines were oblique or vertical, <0.5 mm wide, 10-20 mm long, and only in the buccal or lingual cortex. Fracture lines in the ramus and posterior mandible were created to be at the interface or borders of the 2 stitched images. CBCT images were obtained from the specimens with an 80 mm × 80 mm field of view before and after fracture induction. OnDemand software (Cybermed, Seoul, Korea) was used for stitching the CBCT images. Four observers evaluated 56 (28 stitched and 28 non-stitched) images to detect fracture lines. The diagnostic performance of stitched and non-stitched images was assessed by calculating the area under the receiver operating characteristic curve (AUC). Sensitivity and specificity values were also calculated (alpha=0.05). Results: The AUC was calculated to be 0.862 and 0.825 for the stitched and non-stitched images, respectively (P=0.747). The sensitivity and specificity were 90% and 75% for the non-stitched images and 85% and 87% for the stitched images, respectively. The inter-observer reliability was shown by a Fleiss kappa coefficient of 0.79, indicating good agreement. Conclusion: No significant difference was found in the diagnostic performance of stitched and non-stitched cross-sectional CBCT images of non-displaced fractures of the ovine mandible.

Computed Tomographic Comparison of Length, Width and Angulation of Ethmoidal Infundibulum in Patients With and Without Maxillary Sinusitis.

Ethmoidal infundibulum (EI) is an important part of the osteomeatal complex, which provides the main pathway for the maxillary sinus drainage. This study aimed to compare the length, width, and angulation of EI in patients with/without maxillary sinusitis using computed tomography (CT). This cross-sectional study evaluated 818 spiral CT scans of patients with/without maxillary sinusitis (n = 409 maxillary sinuses in each group) classified according to the clinical symptoms and the Lund-Mackay score for mucosal thickening. The degree of mucosal thickening (on axial and coronal sections), anatomical variations namely concha bullosa (CB), ethmoidal bulla (EB), and Haller cells (HCs), the form of EI (on coronal sections), the length, width and angulation of EI, and degree of nasal septal deviation (on coronal sections) were all evaluated. Data were analyzed by parametric and non-parametric tests (alpha = 0.05). The frequency of EB (P < 0.001), EI form (P < 0.001) and HC (P = 0.011), and the length and width of EI (P < 0.001) were significantly different in patients with and without maxillary sinusitis. The length and width of EI were significantly correlated with the degree of mucosal thickening (P < 0.01). The frequency of CB (P = 0.002), EB (P < 0.001), and HC (P = 0.002), and the EI form (P < 0.001) were significantly different in groups with different degrees of mucosal thickening. EI was wider and shorter in patients with maxillary sinusitis. By an increase in mucosal thickness, the length of EI decreased while its width increased. Also, the frequency of EB and HC, and the EI form were significantly different in the two groups.

The Relationship Between Temporal Bone Pneumatization Pattern and Sinus Mucosal Thickness Grading on Computed Tomography Scans of Paranasal Sinuses.

The relationship between temporal bone pneumatization (TBP) pattern and sinus mucous thickness grading on computed tomography scans of paranasal sinuses was investigated. In this cross-sectional study, a total of 200 temporal bones and paranasal sinuses were evaluated in CT scans of 100 patients with chronic sinusitis (CRS). The mucosal thickness of paranasal sinuses was classified into two groups (0-6 and 7-12) according to the Lund-Mackay (LM) staging system. Also, pneumatization patterns of petrous apex and perilabyrinthine regions were classified according to Jadvah et al. method. Data were analyzed using Chi-square and Fisher's exact tests. The most common pneumatization pattern in the petrous apex was pattern A (49.5%) and in the perilabyrinthine region was pattern B (50%). In the petrous apex, the highest frequencies of pattern A (51.7%) and pattern C (24.6%), among other pneumatization patterns, were found in score range of 7-12 and 0-6, respectively, which was statistically significant (P = 0.017). Although in the perilabyrinthine region, the highest frequencies of pattern A (24.1%) and pattern C (32.7%) were in LM score ranges of 7-12 and 0-6, respectively, no significant difference was found (P = 0.589). The petrous apex pneumatization decreases with an increase in the severity of CRS, which can be in response to the eustachian tube dysfunction and common pathogens with CRS. A similar relationship was also found in the perilabyrinthine region, although it was not statistically significant. No significant relationship between TBP and severity of CRS was found in the age and sex groups.

Periosteal reaction as a crucial radiographic finding for desmoplastic fibroma of the jaw bone in children: A case report.

This report presents the case of a 5-year-old boy with a hard swelling on the right side of the mandible body. An important point of this case is that the primary imaging finding was fine spicules in the inferior border of the mandible on panoramic radiography without significant changes in bone density. Cone-beam computed tomography views revealed a lytic lesion on the lingual side of the right mandibular body with the destruction of the lingual cortex and periosteal reaction from the midline to the first molar area. Careful attention to this radiographic finding in the primary stage in the absence of other significant imaging findings, particularly in children, could result in the early diagnosis of desmoplastic fibroma. Therefore, a better prognosis can be expected following early surgical treatment.

Post-COVID mucormycosis osteomyelitis and its imaging manifestations in the North of Iran: case series.

Mucormycosis is an invasive fungal infection that usually affects patients with immunocompromised conditions. In the context of the COVID-19 pandemic and the following corticosteroid therapy, mucormycosis prevalence has increased. The situation may be more complicated with some underlying diseases such as diabetes mellitus. In addition, due to the vicinity of maxillary bone to the nasal cavity and paranasal sinuses, which are the main routes for the infection to spread, dentists, maxillofacial radiologists, and surgeons may be the first to encounter these patients. Post-COVID mucormycosis osteomyelitis is one of the complications of this infection Bone destruction and the erosion or breach of cortical boundaries of the maxilla and the bone structures in the vicinity of paranasal sinuses are the most critical radiographic findings of post-covid osteomyelitis. Herein, there are some cases of post-covid mucormycosis osteomyelitis involving the maxillary and other facial bones.

The Correlation Between Morphologic Characteristics of Condyle and Glenoid Fossa with Different Sagittal Patterns of Jaw Assessed by Cone-Beam Computed Tomography.

OBJECTIVE: This study aimed to determine the relationship between the morphologic characteristics of condyle and glenoid fossa in different sagittal skeletal patterns using cone-beam computed tomography. METHODS: In this cross-sectional study, the lateral cephalometric and cone-beam computed tomography images of 90 patients were evaluated. The patients were categorized into three equal groups of sagittal skeletal patterns, according to the ANB angle. The greatest anteroposterior and mediolateral diameters of the mandibular condyles, as well as the angle between the long axis of the mandibular condyles and the midsagittal plane, were measured on the axial view of cone-beam computed tomography images. The anterior joint space, superior joint space, posterior joint space, articular eminence inclination, depth of the glenoid fossa, and width of the glenoid fossa were also measured on the central sagittal slices. One-way analysis of variance (ANOVA), Tukey's post hoc test and chi-square test were performed. RESULTS: Patients with the skeletal Class III had a significantly higher articular eminence inclination, while Class II patients had a lower articular eminence inclination (P = .001). In Class III patients, the depth of the glenoid fossa was greater, and the width of the glenoid fossa was smaller than in the other groups (P < .01). The anterior and posterior joint space did not show any significant differences between the 3 groups. CONCLUSION: There were significant differences in some morphological characteristics of the condyle and glenoid fossa in patients with different sagittal skeletal patterns; therefore, this relationship should be considered in the treatment of these patients.

Quantitative Morphometric Analysis of Anatomical Landmarks Involved in Bilateral Sagittal Split Osteotomy in Different Skeletal Malocclusions Using Cone-Beam Computed Tomography.

BACKGROUND: To assess and compare the anatomical landmarks involved in bilateral sagittal split osteotomy (BSSO) in different skeletal malocclusions quantitatively using cone-beam computed tomography (CBCT). METHODS: This retrospective study evaluated 63 CBCT scans of the three malocclusion classes (n = 21). Twenty-one quantitative variables were measured and compared between different malocclusion classes. One-way ANOVA, Welch test, Kruskal Wallis test and the Mann-Whitney test with Bonferroni adjustment were used for data analysis. The level of significance was set at ≤0.05. RESULTS: The patients had a mean age of 26.35 years (range 18-58 years). The width of the lateral cortex in the posterior third (T1-P) of ramus in the left side, and the mean value in the right and left sides were significantly different between different classes of malocclusion (P = 0.049) such that class II patients had significantly thinner lateral cortex. No other significant differences were noted between different malocclusion classes in other variables. CONCLUSION: The quantitative morphological assessment of the mandible in BSSO of different malocclusion classes did not reveal significant differences. There is no superiority in the dimensions of discussed landmarks involved in BSSO among different malocclusion classes. So the risk or the safety of this kind of surgery is similar for these classes. Thus, diagnostic preoperative workup by CBCT is imperative for selection of a surgical approach with minimal postoperative complications.

Fractal analysis of the trabecular bone pattern in the presence/absence of metal artifact-producing objects: Comparison of cone-beam computed tomography with panoramic and periapical radiography.

OBJECTIVES: The effect of metallic objects on the fractal dimension (FD), bone area fraction (BAF) and gray scale values (GSVs) of cone-beam CT (CBCT) images was assessed. Also, FD, BAF and GSV were compared among CBCT, digital periapical and panoramic radiographies. METHODS: Digital periapical and panoramic radiographs were acquired from six blocks of bovine rib. Additionally, different arrangements of titanium implants and intracanal metallic posts were created in the bone blocks and CBCT scans were taken from the different implant-root arrangements. The three radiographical modalities were compared by analysis of variance. Pairwise comparisons between the modalities were performed by the Tukey test (significance level set at 0.05). RESULTS: Different root-implant arrangements in the CBCT images revealed no significant differences in the FD (p = 0.920), BAF and GSV values (p = 0.623). FD differed significantly among the three modalities (p < 0.001). Significant differences were found between CBCT and each of the periapical and panoramic techniques (p < 0.001), while no remarkable differences were observed in the FD of the periapical and panoramic images (p = 0.294). BAF and GSV showed significantly different results among the three radiographical techniques (p < 0.001). The difference was remarkable between CBCT and periapical (p < 0.001), CBCT and panoramic (p < 0.001) and periapical and panoramic (p = 0.008). CONCLUSION: Presence of titanium implants and intracanal posts does not produce different results in the fractal analysis (FA) of the CBCT images. The trabecular bone pattern is best assessed by FA of the periapical radiographs followed by the panoramic and CBCT techniques, respectively.

Accuracy of digital bitewing radiographs with and without applying horizontal tube shift in the diagnosis of residual excess cement around dental implants: an in vitro study / Precisión de las radiografías digitales bitewing con y sin aplicación de desplazamiento horizontal del tubo en el diagnóstico del exceso de cemento residual alrededor de los implantes dentales: un estudio in vitro

Purpose: This study was designed to evaluate the diagnostic value of digital Bitewing (BW) radiographs with and without horizontal tube shift in detecting Residual excess cement (REC) on the proximal and non-proximal surfaces of implant restorations. Material and Methods: Eight mandibular models were fabricated with two implants placed on each side in the premolar and first molar positions. Excess cement was applied to either proximal or non-proximal surfaces of the restorations intentionally during the process of crown cementation. BW radiographs with and without applying horizontal tube shift were acquired. Three maxillofacial radiologists were asked to determine the presence and location of REC in the radiographs. Sensitivity and specificity of the radiographic technique were assessed according to the restoration surface that contained REC. Results: Sensitivity of BW radiographs was 100% for the detection of REC on the proximal surfaces and 41-18, 80% on the non-proximal surfaces. Specificity of the technique was 85.71%-100% for the proximal surfaces and 75-94. 12% for the non-proximal areas. Specificity of the radiographic method was generally greater than its sensitivity for the non-proximal surfaces while in the proximal areas, the two variables had quite similar values. Conclusion: Digital BW radiography is generally more useful for detection of REC on the proximal surfaces. Higher specificity of this technique for the bucco-lingual surfaces suggests more reliability of the negative diagnoses in the non-proximal areas.

Objetivo: Evaluar el valor diagnóstico de las radiografías digitales bitewing (BW), con y sin desplazamiento horizontal del tubo, para detectar el exceso de cemento residual (ECR) en las superficies proximales y no proximales de las restauraciones con implantes. Material y Métodos: Se fabricaron ocho modelos mandibulares con dos implantes colocados a cada lado en las posiciones premolar y primer molar. El exceso de cemento se aplicó intencionalmente en las superficies proximales o no proximales de las restauraciones durante el proceso de cementación de la corona. Se adquirieron radiografías BW con y sin aplicación de desplazamiento horizontal del tubo. Se pidió a tres radiólogos maxilofaciales que determinaran la presencia y ubicación de ECR en las radiografías. La sensibilidad y la especificidad de la técnica radiográfica se evaluaron según la superficie de restauración que contenía ECR. Resultados: La sensibilidad de las radiografías de BW fue del 100% para la detección de ECR en las superficies proximales y del 41,18-80% en las superficies no proximales. La especificidad de la técnica fue 85-71, 100% para las superficies proximales y 75-94, 12% para las áreas no proximales. La especificidad del método radiográfico fue generalmente mayor que su sensibilidad para las superficies no proximales, mientras que en las áreas proximales, las dos variables tuvieron valores bastante similares. Conclusión: La radiografía digital BW es generalmente más útil para la detección de ECR en las superficies proximales. La mayor especificidad de esta técnica para las superficies buco-linguales sugiere una mayor confiabilidad de los diagnósticos negativos en las áreas no proximales.

Fusion patterns of the spheno-occipital synchondrosis in the age range of 9-22: A computed tomography analysis.

OBJECTIVES: To assess the fusion patterns of the spheno-occipital synchondrosis (SOS) in the age range of 9-22 using CT and CBCT images of an Iranian population. SETTING/SAMPLE POPULATION: Spiral CT and CBCT scans of 763 subjects (459 males and 304 females) aged 9-22 were evaluated. The scans had to cover the cranial base area, and those with diseases affecting the bone density, cranial base masses and history of trauma were excluded. MATERIALS AND METHODS: Two oral and maxillofacial radiologists scored the images with regard to the status of SOS fusion based on a 5-stage system. Mann-Whitney, Kruskal-Wallis and Fisher's exact tests were used for data analysis. Age and SOS fusion stages were evaluated through Spearman correlation and linear regression methods (α = 0.01). RESULTS: The earliest age for onset of SOS fusion was 9 in both sexes. Open SOS could be observed until the age of 15 and 14 in males and females, respectively. The earliest age of complete fusion was 12 in males and 13 in females. Furthermore, there was a significant, positive correlation between age and the different stages of SOS fusion (P < .001). CONCLUSION: A significant correlation exists between age and the fusion stages of SOS, rendering it an appropriate means of age estimation during growth periods. Fusion of SOS begins approximately 2 years earlier in females; however, it ends at the age of 17 in both sexes. The fusion scar can be detected up to the age of 12 and 13 in males and females, respectively.

Accuracy of Cone-beam Computed Tomography in Comparison with Standard Method in Evaluating Root Canal Morphology: An In Vitro Study.

INTRODUCTION: In order to successfully perform root canal treatment, thorough knowledge of the root canal anatomy is essential. Cone-beam computed tomography (CBCT) has the ability to improve our understanding of the root canal system. The goal of the present study was to compare the accuracy of CBCT in revealing the number and form of the root canals of different maxillary and mandibular teeth with clearing and staining method. METHODS AND MATERIALS: CBCT images were taken from 80 extracted human teeth fixed in agar arch models. The number and configuration of the root canals of each tooth were determined by the two observers. Then the teeth were cleared and stained. Two endodontists evaluated the number and forms of the root canals. The accuracy of CBCT was determined and compared with clearing and staining by Fisher's exact test. The agreement of two methods in detection of the number and form of the root canals were evaluated by Kappa test, P≤0.05. RESULTS: CBCT accurately detected the number of root canals in 129 (92.1%) of 140 roots and the form of the canals in 119 (85%) of the roots. There was no significant difference between the accuracy of CBCT in the detection of the number (P=0.13) and forms (P=0.4) of root canals of maxillary and mandibular teeth. The agreement between CBCT, and tooth clearing and staining in detection of the number of root canals was excellent in the maxilla (kappa=0.88±0.05) and good in the mandible (kappa=0.720±0.097). The agreement between the two methods in demonstration of the form of root canals was good in both maxillary (kappa=0.73±0.07) and mandibular (kappa=0.67±0.09) teeth. CONCLUSION: CBCT provides accurate information about root canal morphology. Application of this technique could result in more successful endodontic treatments.

The Efficacy of Metal Artifact Reduction Mode in Cone-Beam Computed Tomography Images on Diagnostic Accuracy of Root Fractures in Teeth with Intracanal Posts.

INTRODUCTION: The purpose of this study was to evaluate the efficacy of cone-beam computed tomography CBCT in the diagnosis of RF in the presence of an intracanal posts with and without applying "metal artifact reduction" (MAR) mode. METHODS AND MATERIALS: This in vitro study included 60 single-canal endodontically treated premolars. Post spaces were created in all roots. RFs were simulated in 30 of the 60 teeth. Dentatus posts were cemented in 15 of 30 roots with and without RFs. Teeth were arranged randomly in 6 artificial dental arches. Images were taken using a Vatech CBCT machine with and without MAR (MAR and WMAR, respectively). A radiologist and an endodontist evaluated the CBCT images for the presence of RFs. Sensitivity, Specificity, positive and negative predictive values were determined for each mode. MC Nemar's and Kappa tests were used for data analysis. RESULTS: The percentage of correct diagnosis using the WMAR mode in both the post space and pin groups in the presence of root fracture was 46.6%; with MAR, it increased to 86.6% and 66.6%, respectively. There was no significant difference between two modes in post space (P=0.503) and metal pin groups (0.549). The overall sensitivity of VRF diagnosis in WMAR mode was 46.67%; in MAR mode, sensitivity was 76.67%. The specificity of WMAR and MAR modes were 60% and 53.33%. The levels of agreement between two modes and real findings were less than 0.45. CONCLUSIONS: There were no significant differences between the efficacies of imaging modes. The sensitivity of the MAR mode for diagnosis of VRF in both the pin and post space groups was higher than the WMAR mode. The specificity of MAR in comparison with WMAR was less or equal in dental groups. The agreement between CBCT and real findings was poor.

Evaluation of the success rate of cone beam computed tomography in determining the location and direction of screw access holes in cement-retained implant-supported prostheses: An in vitro study.

STATEMENT OF PROBLEM: Cement-retained implant-supported restorations have advantages over screw-retained restorations but are difficult to retrieve. Identifying the approximate location of the screw access hole (SAH) may reduce damage to the prosthesis. PURPOSE: The purpose of this in vitro study was to evaluate the ability of cone beam computed tomography (CBCT) imaging to determine the location and direction of SAHs in cement-retained implant prostheses. MATERIAL AND METHODS: Five clear acrylic resin casts were made based on a mandibular model. Several implant osteotomies (n=30) were created on the models with surgical burs, and crowns were made using the standard laboratory method with a transfer coping and the closed tray impression technique. CBCT images from the acrylic resin casts were evaluated by a maxillofacial radiologist who was blind to the locations and angles of the osteotomies. The locations of the access holes were determined on multiplanar reconstruction images and transferred to the clinical crown surface as defined points. Based on cross-sectional images, the predicted angle of the access hole was provided to a prosthodontist who was requested to pierce the crown at the proposed location in the specified direction. If the location and/or direction of the access hole were found, the process was considered successful, as the crown could then be removed from the implant abutment through the SAH. The success rate in the detection of the location and direction of the SAH was calculated, and chi-square and Fisher exact tests were applied for data analysis (α=.05). RESULTS: According to the results of this study, the success rate of CBCT to define the location of SAHs was 83.3% and 80% to determine the direction. No significant differences were found among the different dental groups in determination of the location (P=.79) or the direction (P=.53) of the SAHs. Most of the failures in determining the location and direction of the access hole in the buccolingual and mesiodistal directions were in the buccal and mesial locations of the SAH. The success rate of using CBCT to determine the location of SAHs in straight abutments was 100%. A significant difference was found between angled and straight abutments (P=.042). CONCLUSIONS: Using CBCT could help determine the direction and location of SAHs in clinical situations.

Effect of object position in the field of view and application of a metal artifact reduction algorithm on the detection of vertical root fractures on cone-beam computed tomography scans: An in vitro study.

PURPOSE: To assess the effects of object position in the field of view (FOV) and application of a metal artifact reduction (MAR) algorithm on the diagnostic accuracy of cone-beam computed tomography (CBCT) for the detection of vertical root fractures (VRFs). MATERIALS AND METHODS: Sixty human single-canal premolars received root canal treatment. VRFs were induced in 30 endodontically treated teeth. The teeth were then divided into 4 groups, with 2 groups receiving metal posts and the remaining 2 only having an empty post space. The roots from different groups were mounted in a phantom made of cow rib bone, and CBCT scans were obtained for the 4 different groups. Three observers evaluated the images independently. RESULTS: The highest frequency of correct diagnoses of VRFs was obtained with the object positioned centrally in the FOV, using the MAR algorithm. Peripheral positioning of the object without the MAR algorithm yielded the highest sensitivity for the first observer (66.7%). For the second and third observers, a central position improved sensitivity, with or without the MAR algorithm. In the presence of metal posts, central positioning of the object in the FOV significantly increased the diagnostic sensitivity and accuracy compared to peripheral positioning. CONCLUSION: Diagnostic accuracy was higher with central positioning than with peripheral positioning, irrespective of whether the MAR algorithm was applied. However, the effect of the MAR algorithm was more significant with central positioning than with peripheral positioning of the object in the FOV. The clinical experience and expertise of the observers may serve as a confounder in this respect.

The Accuracy of Four Impression-making Techniques in Angulated Implants Based on Vertical Gap.

STATEMENT OF THE PROBLEM: Precision of the impression taken from implant positions significantly determines accurate fit of implant-supported prostheses. An imprecise impression may produce prosthesis misfit. PURPOSE: This study aimed to evaluate the accuracy of four impression-making techniques for angulated implants by stereomicroscope through measuring the vertical marginal gaps between the cemented metal framework and the implant analog. MATERIALS AND METHOD: A definitive cast with two 15° mesially angulated implants served as the standard reference for making all the impressions and later for accuracy evaluation. Four groups of five samples were evaluated: (1) closed-tray snap-fit transfer, (2) open-tray nonsplinted impression coping, (3) metal splinted impression coping, and (4) fabricated acrylic resin transfer cap. A gold-palladium framework was fabricated over the angulated implant abutments, the fit of which was used as reference. The gaps between the metal framework and the implant analogs were measured in sample groups. Corresponding means for each technique and the definitive cast were compared by using ANOVA and post hoc tests. RESULTS: The mean marginal gap was 38.16±0µm in definitive cast, 89±19.74µm in group 1, 78.66±20.63µm in group 2, 54.16±24.29µm in group 3, and 55.83±18.30µm in group 4. ANOVA revealed significant differences between the definitive cast and groups 1 and 2, but not with groups 3 and 4 (p< 0.05). CONCLUSION: Vertical gap measurements showed that metal splinted impression coping and fabricated acrylic resin transfer cap techniques produced quite more accurate impressions than closed-tray snap-fit transfer and open-tray nonsplinted impression coping techniques do. The fabricated acrylic resin transfer cap technique seems to be a reliable impression-making method.

Frequency of different maxillary sinus septal patterns found on cone-beam computed tomography and predicting the associated risk of sinus membrane perforation during sinus lifting.

PURPOSE: Analyzing different patterns of maxillary sinus septa in cone-beam computed tomography (CBCT) images and predicting maxillary sinus membrane perforations. MATERIALS AND METHODS: In this cross-sectional study, CBCT images of 222 patients ranging from 20 to 81 years old were evaluated. One hundred fifty-two patients (93 females and 59 males) who had maxillary sinus septa in axial views were included in this study. Cross-sectional images were used to determine classifications of sinus septa and the risk of membrane perforation using a method modified from Al-Faraje et al. Variables of sex, age, and dental status were considered. Chi-squared and Kruskal-Wallis tests were used for data analysis (P<.05). RESULTS: In this study, 265 maxillary sinus septal patterns were found. The mean age of the patients was 44.1±14.7 years old. The Class I and VII-div II patterns had the greatest and least prevalence, respectively. Furthermore, there was a significant relationship between the location of septa and the frequency of membrane perforation risk (P<.05). In this study, the relationship of different patterns of septa with dental status did not differ significantly (P>0.05). CONCLUSION: A higher prevalence of moderate risk of membrane perforation in the molar region relative to the premolar region was observed. Furthermore, maxillary sinus septa occur most frequently in the molar region, demonstrating the importance of paying attention to this region during sinus lift surgery. This study did not show any relationship between tooth loss and the presence of septa.