Enhancing monoclonal antibody stability during protein a chromatography using 2-methyl imidazolium dihydrogen phosphate.

This study investigates the impact of 2-methyl imidazolium dihydrogen phosphate (2-MIDHP) on monoclonal antibody (mAb) aggregation during the Protein A purification stage, at a low pH (pH 3.0), and the viral inactivation phase. Size-exclusion high-performance liquid chromatography (SE-HPLC) and dynamic light scattering (DLS) were used to assess the mAb aggregation. Additionally, the influence of 2-MIDHP on mAb recovery, host cell protein (HCP) clearance, and Protein A leaching was investigated. Thermal stability of mAb, eluted in buffers containing 5 % to 25 % 2-MIDHP was analysed, using differential scanning calorimetry (DSC). Structural insights were obtained via circular dichroism (CD) and fluorescence spectroscopy. Our findings indicated that 2-MIDHP exerted a concentration-dependent protective effect against mAb aggregation, at the pH of 3.0. As the concentration of 2-MIDHP was increased from 0 % to 25 %, the aggregation was significantly reduced from 3.8 ± 0.01 % to 0.56 ± 0.002 %, as analysed by SE-HPLC. Addition of 2-MIDHP did not significantly impact the mAb recovery, HCP clearance, or Protein A leaching. DSC data supported these results, with higher 2-MIDHP concentrations leading to increased melting temperatures of mAb. CD and fluorescence spectroscopy revealed no significant changes in the secondary structure or aromatic residue environment in 2-MIDHP-treated samples, despite the observed reduction in aggregation. The results suggested that 2-MIDHP mitigated mAb aggregation during Protein A purification, possibly by stabilizing the protein structure under acidic stress conditions. These findings offer valuable insights for improving the robustness of mAb purification processes, enhancing product quality and yield.

Silver nanoparticles loaded triple-layered cellulose-acetate based multifunctional dressing for wound healing.

Chronic wounds present considerable challenges which delay their effective healing. Currently, there are several biomaterial-based wound dressings available for healing diverse wound types. However, most of commercial wound dressings are too expensive to be affordable to the patients belonging to the middle and lower socioeconomic strata of the society. Thus, in this investigation affordable triple layered nanofibrous bandages were fabricated using the layer-by-layer approach. Here, the topmost layer comprised of a hydrophilic poly vinyl alcohol layer, cross-linked with citric acid. The middle layer comprising of cellulose acetate was loaded with silver nanoparticles as an antibacterial agent, while the lowermost layer was fabricated using hydrophobic polycaprolactone. The triple-layered nanofibrous bandages having a nano-topography, exhibited a smooth, uniform and bead-free morphology, with the nanofiber diameter ranging between 200 and 300 nm. The nanofibers demonstrated excellent wettability, slow in vitro degradation, controlled release of nano­silver and potent antibacterial activity against Gram-negative (E.coli) and Gram-positive (S. aureus) bacteria. The fabricated bandages had excellent mechanical strength upto 12.72 ± 0.790 M. Pa, which was suitable for biomedical and tissue engineering applications. The bandage demonstrated excellent in vitro hemocompatibility and biocompatibility. In vivo excisional wound contraction, along with H and E and Masson's Trichrome staining further confirmed the potential of the nanofibrous bandage for full-thickness wound healing. Pre-clinical investigations thus indicated the possibility of further evaluating the triple-layered nanofibrous dressing in clinical settings.

Impact of stirring material on formation of submicron and subvisible aggregates in mAbs by quantitative laser diffraction, dynamic light scattering and background membrane imaging.

Aggregation of monoclonal antibodies (mAbs) is the driving force for their undesirable immunogenic effects. There are multiple factors responsible for aggregation in therapeutic proteins. One significant cause is the process-related shear and interfacial stress generated due to impellers and stirrers. This investigation focuses on understanding the possible aggregation arising upon stirring mAb formulations using stirrers made of different materials. We used quantitative laser diffraction (qLD) to monitor and quantify the stirring induced formation of submicron and subvisible aggregates in the size range from 100 nm to 10 µm. We analysed various aspects of aggregate generation, such as onset of aggregation, particle size distribution, and concentration of aggregates generated using stirrers of different materials. We observed that mixing with stainless steel stirrers resulted in a quicker onset of aggregation and led to significantly higher concentrations of aggregates. Analysis of the stirred samples using dynamic light scattering (DLS) and background imaging technique (BMI) were conducted to complement the qLD analysis. All the three techniques resulted in a similar trend, showing presence of larger and higher quantities of aggregates in steel stirred samples, as compared to those stirred using PEEK and glass. Additionally, we performed SEC-HPLC to quantify the soluble fraction of monomer and recorded that the least amount was present in the steel stirred samples. This work highlights the need for optimizing the materials used for fabricating the stirrers/impellers.

Current concepts in the management of cataract with keratoconus.

This review analyzed all pertinent articles on keratoconus (KCN) and cataract surgery. It covers preoperative planning, intraoperative considerations, and postoperative management, with the aim of providing a simplified overview of treating such patients. Preoperatively, the use of corneal cross-linking, intrastromal corneal ring segments, and topo-guided corneal treatments can help stabilize the cornea and improve the accuracy of biometric measurements. It is important to consider the advantages and disadvantages of traditional techniques such as penetrating keratoplasty and deep anterior lamellar keratoplasty, as well as newer stromal augmentation techniques, to choose the most appropriate surgical approach. Obtaining reliable measurements can be difficult, especially in the advanced stages of the disease. The choice between toric and monofocal intraocular lenses (IOLs) should be carefully evaluated. Monofocal IOLs are a better choice in patients with advanced disease, and toric lenses can be used in mild and stable KCN. Intraoperatively, the use of a rigid gas permeable (RGP) lens can overcome the challenge of image distortion and loss of visual perspective. Postoperatively, patients may need updated RGP or scleral lenses to correct the corneal irregular astigmatism. A thorough preoperative planning is crucial for good surgical outcomes, and patients need to be informed regarding potential postoperative surprises. In conclusion, managing cataracts in KCN patients presents a range of challenges, and a comprehensive approach is essential to achieve favorable surgical outcomes.

From Efficiency to Yield: Exploring Recent Advances in CHO Cell Line Development for Monoclonal Antibodies.

The increasing demand for biosimilar monoclonal antibodies (mAbs) has prompted the development of stable high-producing cell lines while simultaneously decreasing the time required for screening. Existing platforms have proven inefficient, resulting in inconsistencies in yields, growth characteristics, and quality features in the final mAb products. Selecting a suitable expression host, designing an effective gene expression system, developing a streamlined cell line generation approach, optimizing culture conditions, and defining scaling-up and purification strategies are all critical steps in the production of recombinant proteins, particularly monoclonal antibodies, in mammalian cells. As a result, an active area of study is dedicated to expression and optimizing recombinant protein production. This review explores recent breakthroughs and approaches targeted at accelerating cell line development to attain efficiency and consistency in the synthesis of therapeutic proteins, specifically monoclonal antibodies. The primary goal is to bridge the gap between rising demand and consistent, high-quality mAb production, thereby benefiting the healthcare and pharmaceutical industries.

Analytical techniques for screening of cannabis and derivatives from human hair specimens.

Cannabis and associated substances are some of the most frequently abused drugs across the globe, mainly due to their anxiolytic and euphorigenic properties. Nowadays, the analysis of hair samples has been given high importance in forensic and analytical sciences and in clinical studies because they are associated with a low risk of infection, do not require complicated storage conditions, and offer a broad window of non-invasive detection. Analysis of hair samples is very easy compared to the analysis of blood, urine, and saliva samples. This review places particular emphasis on methodologies of analyzing hair samples containing cannabis, with a special focus on the preparation of samples for analysis, which involves screening and extraction techniques, followed by confirmatory assays. Through this manuscript, we have presented an overview of the available literature on the screening of cannabis using mass spectroscopy techniques. We have presented a detailed overview of the advantages and disadvantages of this technique, to establish it as a suitable method for the analysis of cannabis from hair samples.

Drug-loaded vegan gummies for personalized dosing of simethicone: A feasibility study of semi-solid extrusion-based 3D printing of pectin-based low-calorie drug gummies.

Chewable gummies are an attractive dosage form for all age groups because of their appearance and texture. Although, this dosage form has been highly preferred administering nutraceuticals, its application in the pharmaceutical sector is worth exploring. In this study, simethicone (SMT), an OTC drug prescribed for anti-flatulence was incorporated in pectin- based, low-calorie, 3D printed gummies. Semi-solid extrusion (SSE)-based 3D printing was used to dispense personalized dose of SMT i.e 40 mg for children and 125 mg for adults. Formulation optimization was carried out based on the texture profile of the gummies, using a texture analyzer. The inks were thoroughly characterized for their rheological behavior since it is a critical attribute for SSE-based 3D printing. Printing parameters like the printing speed, layer height and the type of the nozzle were optimized based on the printing accuracy achieved. The printed gummies were further evaluated for their disintegration time, drug content, weight variation, water activity and total microbial count. SSE-based 3D printing was found to be an effective tool to print pectin-based shear thinning gels for accurate drug dispensing. The texture profile of the printed gummies was comparable to the gummies prepared by conventional method as well as the marketed samples.

Microfluidic technology for cell biology-related applications: a review.

Fluid flow at the microscale level exhibits a unique phenomenon that can be explored to fabricate microfluidic devices integrated with components that can perform various biological functions. In this manuscript, the importance of physics for microscale fluid dynamics using microfluidic devices has been reviewed. Microfluidic devices provide new opportunities with regard to spatial and temporal control over cell growth. Furthermore, the manuscript presents an overview of cellular stimuli observed by combining surfaces that mimic the complex biochemistries and different geometries of the extracellular matrix, with microfluidic channels regulating the transport of fluids, soluble factors, etc. We have also explained the concept of mechanotransduction, which defines the relation between mechanical force and biological response. Furthermore, the manipulation of cellular microenvironments by the use of microfluidic systems has been highlighted as a useful device for basic cell biology research activities. Finally, the article focuses on highly integrated microfluidic platforms that exhibit immense potential for biomedical and pharmaceutical research as robust and portable point-of-care diagnostic devices for the assessment of clinical samples.

Taking the leap toward human-specific nonanimal methodologies: The need for harmonizing global policies for microphysiological systems.

With a recent amendment, India joined other countries that have removed the legislative barrier toward the use of human-relevant methods in drug development. Here, global stakeholders weigh in on the urgent need to globally harmonize the guidelines toward the standardization of microphysiological systems. We discuss a possible framework for establishing scientific confidence and regulatory approval of these methods.

Large-Scale Purification and Characterization of Recombinant Receptor-Binding Domain (RBD) of SARS-CoV-2 Spike Protein Expressed in Yeast.

SARS-CoV-2 spike protein is an essential component of numerous protein-based vaccines for COVID-19. The receptor-binding domain of this spike protein is a promising antigen with ease of expression in microbial hosts and scalability at comparatively low production costs. This study describes the production, purification, and characterization of RBD of SARS-CoV-2 protein, which is currently in clinical trials, from a commercialization perspective. The protein was expressed in Pichia pastoris in a large-scale bioreactor of 1200 L capacity. Protein capture and purification are conducted through mixed-mode chromatography followed by hydrophobic interaction chromatography. This two-step purification process produced RBD with an overall productivity of ~21 mg/L at >99% purity. The protein's primary, secondary, and tertiary structures were also verified using LCMS-based peptide mapping, circular dichroism, and fluorescence spectroscopy, respectively. The glycoprotein was further characterized for quality attributes such as glycosylation, molecular weight, purity, di-sulfide bonding, etc. Through structural analysis, it was confirmed that the product maintained a consistent quality across different batches during the large-scale production process. The binding capacity of RBD of spike protein was also assessed using human angiotensin-converting enzyme 2 receptor. A low binding constant range of KD values, ranging between 3.63 × 10-8 to 6.67 × 10-8, demonstrated a high affinity for the ACE2 receptor, revealing this protein as a promising candidate to prevent the entry of COVID-19 virus.