Synthesis and characterization of hydroxyapatite from bovine bone for production of dental implants.

This paper presents a study on the synthesis and characterization of hydroxyapatite that can be used to produce dental implants or serves as a replacement for other body hard tissues. The bioceramic material (hydroxyapatite) was derived from bovine bone samples after they were de-fatted and processed to produce particles measuring less than 250 µm. Processed bone powders were calcinated at 750℃ to obtain calcium phosphate compound (hydroxyapatite). This indicated complete elimination of the organic phase of the bone. The synthesized hydroxyapatite was physico-chemically characterized using Fourier transform infrared spectroscopy (FTIR), an optical microscope and scanning electron microscopy (SEM). Hydroxyapatite powder was sintered into a block and then characterized mechanically by measuring its hardness using a Rockwell hardness testing machine. The hydrophilicity and hydrophobicity of the sintered blocked specimens were studied. The average wettability of the substrate, which was a characteristic of the contact angle, was found to be approximately 31.73 degrees. This contact angle value is a measure of the material hydrophilicity. The biostability/corrosive resistance of the sintered samples was simulated in vitro in phosphate buffered saline solution (pH 7.4) by incubating in an optical incubator shaker (set at 60 revolutions per minute) to mimic physiological conditions. The results showed that hydroxyapatite can be extracted economically from a natural source such as bovine bone and can be employed as a restorative biomaterial for dental implants and hard tissue replacement.

Anomalous Release Kinetics of Prodigiosin from Poly-N-Isopropyl-Acrylamid based Hydrogels for The Treatment of Triple Negative Breast Cancer.

This paper presents the anomalous release kinetics of a cancer drug (prodigiosin) frompoly-n-isopropyl-acrylamide (P(NIPA))-based gels. The release exponents, n, which correspond to the drug release mechanisms, were found to be between 0.41 and 1.40. This is within a range that include Fickian case I (n = 0.45) and non-Fickian diffusion (case II) (n > 0.45) for cylindrical drug-loaded structures. The results, however, suggest that the release exponents, n, correspond mostly to anomalous case II and super case II transport mechanics with sigmoidal characteristics. The drug release kinetics of the P(NIPA)-based hydrogels are well described by bi-dose functions. The observed drug release behavour is related to the porosity of the hydrogels, which can be controlled by cross-linking and copolymerization with acrylamide, which also improves the hydrophilicity of the gels. The paper also presents the effects of cancer drug release on cell survival (%), as well as the cell metabolic activities of treated cells and non-treated cells. The implications of the results are discussed for the development of implantable thermosensitive gels for the controlled release of drugs for localized cancer treatment.

A shear assay study of single normal/breast cancer cell deformation and detachment from poly-di-methyl-siloxane (PDMS) surfaces.

This paper presents the results of a combined experimental and analytical/computational study of viscoelastic cell deformation and detachment from poly-di-methyl-siloxane (PDMS) surfaces. Fluid mechanics and fracture mechanics concepts are used to model the detachment of biological cells observed under shear assay conditions. The analytical and computational models are used to compute crack driving forces, which are then related to crack extension during the detachment of normal breast cells and breast cancer cells from PDMS surfaces that are relevant to biomedical implants. The interactions between cells and the extracellular matrix, or the extracellular matrix and the PDMS substrate, are then characterized using force microscopy measurements of the pull-off forces that are used to determine the adhesion energies. Finally, fluorescence microscopy staining of the cytosketelal structures (actin, micro-tubulin and cyto-keratin), transmembrane proteins (vimentin) and the ECM structures (Arginin Glycine Aspartate - RGD) is used to show that the detachment of cells during the shear assay experiments occurs via interfacial cracking between (between the ECM and the cell membranes) with a high incidence of crack bridging by transmembrane vinculin structures that undergo pull-out until they detach from the actin cytoskeletal structure. The implications of the results are discussed for the design of interfaces that are relevant to implantable biomedical devices and normal/cancer tissue.

A comparative study of the adhesion of biosynthesized gold and conjugated gold/prodigiosin nanoparticles to triple negative breast cancer cells.

This paper explores the adhesion of biosynthesized gold nanoparticles (AuNPs) and gold (Au) nanoparticle/prodigiosin (PG) drug nanoparticles to breast cancer cells (MDA-MB-231 cells). The AuNPs were synthesized in a record time (less than 30 s) from Nauclea latifolia leaf extracts, while the PG was produced via bacterial synthesis with Serratia marcescens sp. The size distributions and shapes of the resulting AuNPs were characterized using transmission electron microscopy (TEM), while the resulting hydrodynamic diameters and polydispersity indices were studied using dynamic light scattering (DLS). Atomic Force Microscopy (AFM) was used to study the adhesion between the synthesized gold nanoparticles (AuNPs)/LHRH-conjugated AuNPs and triple negative breast cancer cells (MDA-MB-231 cells), as well as the adhesion between LHRH-conjugated AuNP/PG drug and MDA-MB-231 breast cancer cells. The adhesion forces between LHRH-conjugated AuNPs and breast cancer cells are shown to be five times greater than those between AuNPs and normal breast cells. The increase in adhesion is shown to be due to the over-expression of LHRH receptors on the surfaces of MDA-MB-231 breast cancer cells, which was revealed by confocal immuno-fluorescence microscopy. The implications of the results are then discussed for the selective and specific targeting and treatment of triple negative breast cancer.

Extended pulsated drug release from PLGA-based minirods.

The kinetics of degradation and sustained cancer drugs (paclitaxel (PT) and prodigiosin (PG)) release are presented for minirods (each with diameter of ~5 and ~6 mm thick). Drug release and degradation mechanisms were studied from solvent-casted cancer drug-based minirods under in vitro conditions in phosphate buffer solution (PBS) at a pH of 7.4. The immersed minirods were mechanically agitated at 60 revolutions per minute (rpm) under incubation at 37 °C throughout the period of the study. The kinetics of drug release was studied using ultraviolet visible spectrometry (UV-Vis). This was used to determine the amount of drug released at 535 nm for poly(lactic-co-glycolic acid) loaded with prodigiosin (PLGA-PG) samples, and at 210 nm, for paclitaxel-loaded samples (PLGA-PT). The degradation characteristics of PLGA-PG and PLGA-PT are elucidated using optical microscope as well as scanning electron microscope (SEM). Statistical analysis of drug release and degradation mechanisms of PLGA-based minirods were performed. The implications of the results are discussed for potential applications in implantable/degradable structures for multi-pulse cancer drug delivery.

Extraction and encapsulation of prodigiosin in chitosan microspheres for targeted drug delivery.

The encapsulation of drugs in polymeric materials has brought opportunities to the targeted delivery of chemotherapeutic agents. These polymeric delivery systems are capable of maximizing the therapeutic activity, as well as reducing the side effects of anti-cancer agents. Prodigiosin, a secondary metabolite extracted from the bacteria, Serratia marcescens, exhibits anti-cancer properties. Prodigiosin-loaded chitosan microspheres were prepared via water-in-oil (w/o) emulsion technique, using glutaraldehyde as a cross-linker. The morphologies of the microspheres were studied using scanning electron microscopy. The average sizes of the microspheres were between 40µm and 60µm, while the percentage yields ranged from 42±2% to 55.5±3%. The resulting encapsulation efficiencies were between 66.7±3% and 90±4%. The in-vitro drug release from the microspheres was characterized by zeroth order, first order and Higuchi and Korsmeyer-Peppas models.

PLGA-based microparticles loaded with bacterial-synthesized prodigiosin for anticancer drug release: Effects of particle size on drug release kinetics and cell viability.

This paper presents the synthesis and physicochemical characterization of biodegradable poly (d,l-lactide-co-glycolide) (PLGA)-based microparticles that are loaded with bacterial-synthesized prodigiosin drug obtained from Serratia marcescens subsp. Marcescens bacteria for controlled anticancer drug delivery. The micron-sized particles were loaded with anticancer drugs [prodigiosin (PG) and paclitaxel (PTX) control] using a single-emulsion solvent evaporation technique. The encapsulation was done in the presence of PLGA (as a polymer matrix) and poly-(vinyl alcohol) (PVA) (as an emulsifier). The effects of processing conditions (on the particle size and morphology) are investigated along with the drug release kinetics and drug-loaded microparticle degradation kinetics. The localization and apoptosis induction by prodigiosin in breast cancer cells is also elucidated along with the reduction in cell viability due to prodigiosin release. The implication of this study is for the potential application of prodigiosin PLGA-loaded microparticles for controlled delivery of cancer drug and treatment to prevent the regrowth or locoregional recurrence, following surgical resection of triple negative breast tumor.

Swelling of poly(N-isopropylacrylamide) P(NIPA)-based hydrogels with bacterial-synthesized prodigiosin for localized cancer drug delivery.

We present the results of swelling experiments on poly(N-isopropylacrylamide) P(NIPA)-based hydrogels. The swelling characteristics of P(NIPA)-based homo-polymer and P(NIPA)-based co-polymers with Acrylamide (AM) and Butyl Methacrylate (BMA), were studied using weight gain experiments. The swelling due to the uptake of biosynthesized cancer drug, prodigiosin (PG), was compared to swelling in controlled environments (distilled water (DW), paclitaxel™ (PT) and bromophenol blue (BB)). PG was synthesized with Serratia marcescens (SM) subsp. marcescens bacteria. The mechanisms of drug diffusion and swelling of P(NIPA)-based hydrogels are also elucidated along with characterizing the heterogeneous porous structure of the P(NIPA)-based hydrogels. High Performance Liquefied Chromatography (HPLC) analysis revealed the purity of the biosynthesized prodigiosin to be 92.8%. PG was then absorbed by P(NIPA)-based hydrogels at temperatures between 28-48°C. This is a temperature range that might be encountered during the implantation of biomedical devices for localized cancer treatment via drug delivery and hyperthermia. The results obtained are shown to provide insights for the design of implantable biomedical devices for the localized treatment of breast cancer.

Biosynthesis and the conjugation of magnetite nanoparticles with luteinizing hormone releasing hormone (LHRH).

This paper presents the results of an experimental study of the biosynthesis of magnetite nanoparticles (BMNPs) with particle sizes between 10 nm and 60 nm. The biocompatible magnetic nanoparticles are produced from Magnetospirillum magneticum (M.M.) bacteria that respond to magnetic fields. M.M. bacteria were cultured and used to synthesize magnetite nanoparticles. This was done in an enriched magnetic spirillum growth medium (EMSGM) at different pH levels. The nanoparticle concentrations were characterized with UV-Visible (UV-Vis) spectroscopy, while the particle shapes were elucidated via transmission electron microscopy (TEM). The structure of the particles was studied using X-ray diffraction (XRD), while the hydrodynamic radii, particle size distributions and polydispersity of the nanoparticles were characterized using dynamic light scattering (DLS). Carbodiimide reduction was also used to functionalize the BMNPs with a molecular recognition unit (luteinizing hormone releasing hormone, LHRH) that attaches specifically to receptors that are over-expressed on the surfaces of most breast cancer cell types. The resulting nanoparticles were examined using Fourier Transform Infrared (FTIR) spectroscopy and quantitative image analysis. The implications of the results are then discussed for the potential development of magnetic nanoparticles for the specific targeting and treatment of breast cancer.

Prodigiosin release from an implantable biomedical device: kinetics of localized cancer drug release.

This paper presents an implantable encapsulated structure that can deliver localized heating (hyperthermia) and controlled concentrations of prodigiosin (a cancer drug) synthesized by bacteria (Serratia marcesce (subsp. marcescens)). Prototypical Poly-di-methyl-siloxane (PDMS) packages, containing well-controlled micro-channels and drug storage compartments, were fabricated along with a drug-storing polymer produced by free radical polymerization of Poly(N-isopropylacrylamide)(PNIPA) co-monomers of Acrylamide (AM) and Butyl-methacrylate (BMA). The mechanisms of drug diffusion of PNIPA-base gels were elucidated. Scanning Electron Microscopy (SEM) was also used to study the heterogeneous porous structure of the PNIPA-based gels. The release exponents, n, of the gels were found to between 0.5 and 0.7. This is in the range expected for Fickian (n=0.5). Deviation from Fickian diffusion was also observed (n>0.5) diffusion. The gel diffusion coefficients were shown to vary between 2.1×10(-12)m(2)/s and 4.8×10(-6)m(2)/s. The implications of the results are then discussed for the localized treatment of cancer via hyperthermia and the controlled delivery of prodigiosin from encapsulated PNIPA-based devices.