Albumin-Based Hydrogel Films Covalently Cross-Linked with Oxidized Gellan with Encapsulated Curcumin for Biomedical Applications.

Bovine serum albumin (BSA) hydrogels are non-immunogenic, low-cost, biocompatible, and biodegradable. In order to avoid toxic cross-linking agents, gellan was oxidized with NaIO4 to obtain new functional groups like dialdehydes for protein-based hydrogel cross-linking. The formed dialdehyde groups were highlighted with FT-IR and NMR spectroscopy. This paper aims to investigate hydrogel films for biomedical applications obtained by cross-linking BSA with oxidized gellan (OxG) containing immobilized ß-cyclodextrin-curcumin inclusion complex (ß-CD-Curc) The ß-CD-Curc improved the bioavailability and solubility of Curc and was prepared at a molar ratio of 2:1. The film's structure and morphology were evaluated using FT-IR spectroscopy and SEM. The swelling degree (Q%) values of hydrogel films depend on hydrophilicity and pH, with higher values at pH = 7.4. Additionally, the conversion index of -NH2 groups into Schiff bases increases with an increase in OxG amount. The polymeric matrix provides protection for Curc, is non-cytotoxic, and enhances antioxidant activity. At pH = 5.5, the skin permeability and release efficiency of encapsulated curcumin were higher than at pH = 7.4 because of the interaction of free aldehyde and carboxylic groups from hydrogels with amine groups from proteins present in the skin membrane, resulting in a better film adhesion and more efficient curcumin release.

Influence of ZnO Nanoparticles on the Properties of Ibuprofen-Loaded Alginate-Based Biocomposite Hydrogels with Potential Antimicrobial and Anti-Inflammatory Effects.

Hydrogels are a favorable alternative to accelerate the burn wound healing process and skin regeneration owing to their capability of absorbing contaminated exudates. The bacterial infections that occur in burn wounds might be treated using different topically applied materials, but bacterial resistance to antibiotics has become a major problem worldwide. Therefore, the use of non-antibiotic treatments represents a major interest in current research. In this study, new antibiocomposite hydrogels with anti-inflammatory and antimicrobial properties based on hyaluronic acid (HA) and sodium alginate (AG) were obtained using 4-(4,6-dimethoxy-1,3,5-triazinyl-2)-4-methylmorpholinium chloride as an activator. The combination of Ibuprofen, a non-steroidal anti-inflammatory drug commonly used to reduce inflammation, fever and pain in the body, with zinc oxide nanoparticles (ZnO NPs) was used in this study aimed at creating a complex hydrogel with anti-inflammatory and antimicrobial action and capable of improving the healing process of wounds caused by burns. FTIR spectra confirmed the cross-linking of AG with HA as well as the successful incorporation of ZnO NPs. Using electronic microscopy, it was noticed that the morphology of hydrogels is influenced by the incorporation of ZnO nanoparticles. Moreover, the incorporation of ZnO nanoparticles into hydrogels also has an influence on the swelling behavior at both pH 7.4 and 5.4. In fact, the swelling rate is lower when the amounts of the activator, HA and ZnO NPs are high. A drug release rate of almost 100% was observed for hydrogels without ZnO NPs, whereas the addition of nanoparticles to hydrogels led to a decrease in the release rate to 68% during 24 h. Cellular viability tests demonstrated the non-cytotoxic behavior of the hydrogels without the ZnO NPs, whereas a weak to moderate cytotoxic effect was noticed for hydrogels with ZnO NPs. The hydrogels containing 4% and 5% ZnO NPs, respectively, showed good antimicrobial activity against the S. aureus strain. These preliminary data prove that these types of hydrogels can be of interest as biomaterials for the treatment of burn wounds.

Silver Nanoparticles Biocomposite Films with Antimicrobial Activity: In Vitro and In Vivo Tests.

Overuse of antimicrobials by the population has contributed to genetic modifications in bacteria and development of antimicrobial resistance, which is very difficult to combat nowadays. To solve this problem, it is necessary to develop new systems for the administration of antimicrobial active principles. Biocomposite systems containing silver nanoparticles can be a good medical alternative. In this context, the main objective of this study was to obtain a complex system in the form of a biocomposite film with antimicrobial properties based on chitosan, poly (vinyl alcohol) and silver nanoparticles. This new system was characterized from a structural and morphological point of view. The swelling degree, the mechanical properties and the efficiency of loading and release of an anti-inflammatory drug were also evaluated. The obtained biocomposite films are biocompatibles, this having been demonstrated by in vitro tests on HDFa cell lines, and have antimicrobial activity against S. aureus. The in vivo tests, carried out on rabbit subjects, highlighted the fact that signs of reduced fibrosis were specific to the C2P4.10.Ag1-IBF film sample, demonstrated by: intense expression of TNFAIP8 factors; as an anti-apoptotic marker, MHCII that favors immune cooperation among local cells; αSMA, which marks the presence of myofibroblasts involved in approaching the interepithelial spaces for epithelialization; and reduced expression of the Cox2 indicator of inflammation, Col I.

Drug-Loaded Polymeric Micelles Based on Smart Biocompatible Graft Copolymers with Potential Applications for the Treatment of Glaucoma.

Glaucoma is the second leading cause of blindness in the world. Despite the fact that many treatments are currently available for eye diseases, the key issue that arises is the administration of drugs for long periods of time and the increased risk of inflammation, but also the high cost of eye surgery. Consequently, numerous daily administrations are required, which reduce patient compliance, and even in these conditions, the treatment of eye disease is too ineffective. Micellar polymers are core-shell nanoparticles formed by the self-assembly of block or graft copolymers in selective solvents. In the present study, polymeric micelles (PMs) were obtained by dialysis from smart biocompatible poly(ε-caprolactone)-poly(N-vinylcaprolactam-co-N-vinylpyrrolidone) [PCL-g-P(NVCL-co-NVP)] graft copolymers. Two copolymers with different molar masses were studied, and a good correlation was noted between the micellar sizes and the total degree of polymerisation (DPn) of the copolymers. The micelles formed by Cop A [PCL120-g-P(NVCL507-co-NVP128)], with the lowest total DPn, have a Z-average value of 39 nm, whereas the micellar sizes for Cop B [PCL120-g-P(NVCL1253-co-NVP139)] are around 47 nm. These PMs were further used for the encapsulation of two drugs with applications for the treatment of eye diseases. After the encapsulation of Dorzolamide, a slight increase in micellar sizes was noted, whereas the encapsulation of Indomethacin led to a decrease in these sizes. Using dynamic light scattering, it was proved that both free and drug-loaded PMs are stable for 30 days of storage at 4 °C. Moreover, in vitro biological tests demonstrated that the obtained PMs are both haemo- and cytocompatible and thus can be used for further in vivo tests. The designed micellar system proved its ability to release the encapsulated drugs in vitro, and the results obtained were validated by in vivo tests carried out on experimental animals, which proved its high effectiveness in reducing intraocular pressure.

PVA/Chitosan Thin Films Containing Silver Nanoparticles and Ibuprofen for the Treatment of Periodontal Disease.

Local delivery of drugs or antimicrobial agents is a suitable approach in the management of periodontitis when the infection is localized deep in the pockets and does not adequately respond to mechanical debridement and/or systemic antibiotic treatment. In this context, the objective of this study was to prepare new biocomposite films with antimicrobial, anti-inflammatory, and good mechanical properties to be applied in periodontal pockets. The composite film is eco-friendly synthesized from poly(vinyl alcohol) (PVA) cross-linked with oxidized chitosan (OxCS). Silver nanoparticles (AgNps) were inserted during film synthesis by adding freshly chitosan-capped AgNps colloidal solution to the polymer mixture; the addition of AgNps up to 1.44 wt.% improves the physico-chemical properties of the film. The characterization of the films was performed by FT-IR, atomic mass spectrometry, X-ray spectroscopy, and SEM. The films displayed a high swelling ratio (162%), suitable strength (1.46 MPa), and excellent mucoadhesive properties (0.6 N). Then, ibuprofen (IBF) was incorporated within the best film formulation, and the IBF-loaded PVA/OxCS-Ag films could deliver the drug in a sustained manner up to 72 h. The biocomposite films have good antimicrobial properties against representative pathogens for oral cavities. Moreover, the films are biocompatible, as demonstrated by in vitro tests on HDFa cell lines.

Biocomposite Hydrogels for the Treatment of Bacterial Infections: Physicochemical Characterization and In Vitro Assessment.

Hydrogels based on natural and synthetic polymers and inorganic nanoparticles proved to be a viable strategy in the fight against some Gram-positive and Gram-negative bacteria. Additionally, numerous studies have demonstrated the advantages of using ZnO nanoparticles in medicine due to their high antibacterial efficacy and relatively low cost. Consequently, the purpose of our study was to incorporate ZnO nanoparticles into chitosan/poly (vinyl alcohol)-based hydrogels in order to obtain a biocomposite with antimicrobial properties. These biocomposite hydrogels, prepared by a double crosslinking (covalent and ionic) were characterized from a structural, morphological, swelling degree, and mechanical point of view. FTIR spectroscopy demonstrated both the apparition of new imine and acetal bonds due to covalent crosslinking and the presence of the sulfate group following ionic crosslinking. The morphology, swelling degree, and mechanical properties of the obtained hydrogels were influenced by both the degree of covalent crosslinking and the amount of ZnO nanoparticles incorporated. In vitro cytotoxicity assessment showed that hydrogels without ZnONPs are non-cytotoxic while the biocomposite hydrogels are weak (with 3% ZnONPs) or moderately (with 4 and 5% ZnONPs) cytotoxic. Compared to nanoparticle-free hydrogels, the biocomposite hydrogels show significant antimicrobial activity against S. aureus, E. coli, and K. pneumonia.

Pullulan derivative with cationic and hydrophobic moieties as an appropriate macromolecule in the synthesis of nanoparticles for drug delivery.

A new amphiphilic pullulan derivative (DBAP-PO) was obtained by grafting tertiary butyl amine and octanoyl groups on the pullulan backbone as cationic and hydrophobic moieties, respectively. The structural characteristics of the modified polymer were investigated by FT-IR and 1H and 13C NMR spectroscopy. The self-association ability in aqueous solution of DBAP-PO was studied by viscosity and fluorescence methods. The intrinsic viscosity of the polymer was determined by Wolf model. The critical aggregation concentration (CAC) value of 0.028 g/dL, determined by fluorescence measurements in the presence of pyrene, was confirmed by capillary viscosimetry and dynamic laser scattering (DLS). Dialysis method was used to demonstrate the capacity of the pullulan derivative to form spherical nanoparticles (d ~ 200 nm) loaded with model drug, sodium diclofenac (DF) (74% entrapment efficiency). The DF release was sustained and pH-dependent. In vitro cytotoxicity as well as morphological studies conducted on the human skin fibroblasts showed that DBAP-PO/DF nanoparticles do not exhibit cytotoxic effects at the pharmacologically relevant concentration of DF, maintaining the typical morphology of the cells.

Drug Delivery System Based on pH-Sensitive Biocompatible Poly(2-vinyl pyridine)-b-poly(ethylene oxide) Nanomicelles Loaded with Curcumin and 5-Fluorouracil.

Smart polymeric micelles (PMs) are of practical interest as nanocarriers for the encapsulation and controlled release of hydrophobic drugs. Two hydrophobic drugs, naturally-based curcumin (Cur) and synthetic 5-fluorouracil (5-FU), were loaded into the PMs formed by a well-defined pH-sensitive poly(2-vinyl pyridine)-b-poly(ethylene oxide) (P2VP90-b-PEO398) block copolymer. The influence of the drug loading on the micellar sizes was investigated by dynamic light scattering (DLS) and it appears that the size of the PMs increases from around 60 to 100 nm when Cur is loaded. On the contrary, the loading of the 5-FU has a smaller effect on the micellar sizes. This difference can be attributed to higher molar mass of Cur with respect to 5-FU but also to higher loading efficiency of Cur, 6.4%, compared to that of 5-FU, 5.8%. In vitro drug release was studied at pH 2, 6.8, and 7.4, and it was observed that the pH controls the release of both drugs. At pH 2, where the P2VP sequences from the "frozen-in" micellar core are protonated, the drug release efficiencies exceed 90%. Moreover, it was demonstrated, by in vitro assays, that these PMs are hemocompatible and biocompatible. Furthermore, the PMs protect the Cur against the photo-degradation, whereas the non-ionic PEO corona limits the adsorption of bovine serum albumin (BSA) protein on the surface. This study demonstrates that these pH-sensitive PMs are suitable for practical utilization as human-safe and smart, injectable drug delivery systems.

Antitumoral Drug-Loaded Biocompatible Polymeric Nanoparticles Obtained by Non-Aqueous Emulsion Polymerization.

Non-aqueous dispersions (NAD) with two types of polymeric nanoparticles (NPs), such as hydrophobic poly(ε-caprolactone) (PCL) and hydrophilic cross-linked poly(vinylpyrrolidone) (PNVP), were synthesized in the present study starting from monomer-in-silicone oil (PDMS) polymerizable non-aqueous emulsions stabilized with the same tailor-made PDMS-based block copolymer. These NPs were loaded with CCisplatin, an antitumoral model drug, directly from the emulsion polymerization step, and it was observed that the presence of the drug leads only to a slight increase of the NPs size, from 120 to 150 nm. The drug release kinetics was evaluated at 37 °C in phosphate buffer at pH = 7.4 and it appeared that the drug release rate from the hydrophilic cross-linked PNVP-based NPs is higher than that from the hydrophobic PCL-based NPs. Moreover, haemolysis tests revealed the fact that these two types of NPs have a good compatibility with the blood. Furthermore, for both the free and drug-loaded NPs, the in vitro cytotoxicity and apoptosis was studied on two types of cancer cell lines, such as MCF-7 (breast cancer cell line) and A-375 (skin cancer cell line). Both types of NPs had no cytotoxic effect but, at a concentration of 500 µg/mL, presented an apoptotic effect similar to that of the free drug.

"In vitro" behaviour of aptamer-functionalized polymeric nanocapsules loaded with 5-fluorouracil for targeted therapy.

New type of nanocapsules based on carboxymethyl chitosan functionalized with AS1411 aptamer and poly(N-vinylpyrrolidone-alt-itaconic anhydride) loaded with 5-Fluorouracil (5-FU) were developed, with the potential to improve the treatment of cancer. Functionalization of nanocapsules with AS1411 aptamer will enhance their recognition by tumor cells, due to the interaction with nucleolin, and subsequent endocytosis. Nanocapsules were prepared by interfacial condensation method in the absence of any toxic crosslinking agents. The condensation reaction took place at the interface between the organic and aqueous phases by opening the anhydride cycles from the copolymer, under the action of the NH2 groups from mixture of chitosan/aptamer-functionalized carboxymethyl chitosan. The nanocapsules diameter varied between 100 and 267 nm as a function of the molar ratio of the polymers. SEM images have revealed that nanocapsules were spherical and presented relatively low dimensional polydispersity. Nanocapsules swelling degree was found between 1000 and 1680% in PBS solution (pH = 7.4) and they allowed the encapsulation of an important amount of 5-Fluorouracil (5-FU). The release efficiency of 5-FU was studied, the processes being controlled by the drug diffusion through the polymeric membrane, as confirmed by the theoretical analysis of the drug release. The cytotoxicity and haemolysis tests performed on the nanocapsules proved their lack of toxicity and their excellent hemocompatibility. The obtained results were encouraging, showing that these original 5-FU-loaded nanocapsules were able to induce a more pronounced cytotoxic effect on neoplastic MCF-7 cells, the occurrence of dead cells being more rapidly than in the case of free 5-FU.