RESUMEN
To support the development of safe and feasible sludge management strategies, the accumulation rates of sludge and its characteristics were studied in four primary wastewater stabilization ponds (WSPs) in central Mexico (three facultative and one anaerobic). The accumulation rates and distribution of sludge were determined by measuring the thickness of the sludge layer at 8-40 locations throughout each pond. The average, per capita sludge accumulation rates ranged from 0.021 to 0.036m(3)/person/yr. In the anaerobic pond the sludge distribution was uniform throughout the pond, whereas in the three facultative ponds most of the sludge accumulated directly in front of the inlet. To measure the horizontal and vertical variation in the sludge characteristics, sludge cores were collected from 3 to 7 locations in three of the ponds. Each core was divided into 4 sub-samples in which various physical, chemical, and microbiological parameters were measured. In addition, the inactivation of several pathogen indicator organisms was studied in a batch of sludge for 7 months. Based on the microbiological results, it is concluded that reasonable estimates of the inactivation of fecal coliform bacteria, fecal enterococci, F+ coliphage, somatic coliphage, and Ascaris eggs in WSP sludge in central Mexico can be made using first-order rate constants of 0.1, 0.1, 0.01, 0.001, and 0.001d(-1), respectively. From the observed changes in the concentrations of total solids and the volatile to fixed solids ratio, empirical equations were developed to describe anaerobic degradation and compression, which are the two most important processes affecting the volume of sludge after its deposition.