Nonlinear liquid-liquid chromatography: Beyond a constant distribution coefficient.

Liquid-liquid chromatography (LLC) is a technique in which the separation of mixture components is achieved due to their different distribution between the two phases of a pre-equilibrated biphasic solvent system. In this work, the LLC operation in the nonlinear range of the distribution isotherm was systematically examined for the first time. The influence of the feed concentration on the elution profiles of a model component (cannabidiol, CBD) was studied in three LLC units of different types and sizes ranging from ∼20 mL to ∼2 L. A series of pulse injections with CBD concentrations varying from 1 to 300 mg/mL was performed with n-hexane/methanol/water 5/4/1 (v/v/v) in descending mode (lower phase as the mobile phase). The elution profiles were simulated using the equilibrium-cell model and an anti-Langmuir-like equation for describing the CBD distribution equilibria. The distribution equilibria equation parameters were fitted to the CBD elution profiles using the peak fitting method. The model was validated and provided good predictions of the CBD elution profiles in the entire concentration range for all three LLC units.

Synthesis, complex formation and corneal permeation of cyclodextrin-modified, thiolated poly(aspartic acid) as self-gelling formulation of dexamethasone.

The present study aimed at developing a potential in situ gellable dexamethasone (DXM) eye drop. Poly(aspartic acid) (PASP) derivatives were synthesized with dual functionality to improve the solubility of DXM, and to achieve in situ gelation. First, amine-modified ß-cyclodextrin (CD) was attached to polysuccinimide (PSI), second, thiol functionalities were added by the reaction of cysteamine and succinimide rings. Finally, the PSI derivatives were hydrolysed to the corresponding PASP derivatives to get water-soluble polymers. Phase-solubility studies confirmed the complexation ability of CD-containing PASP derivatives. In situ gelation and the effect of the CD immobilization on this behaviour were characterized by rheological measurements. The solubilizing effect of CD was confirmed by kinetic solubility measurements, whereas in vitro corneal permeability assay (corneal-PAMPA) measurements were performed to determine in vitro permeability and flux values. The effect of the PASP derivatives on permeation strongly depended on chemical composition and polymer concentration.

A corneal-PAMPA-based in silico model for predicting corneal permeability.

The capability to predict corneal permeability based on physicochemical parameters has always been a desirable objective of ophthalmic drug development. However, previous work has been limited to cases where either the diversity of compounds used was lacking or the performance of the models was poor. Our study provides extensive quantitative structure-property relationship (QSPR) models for corneal permeability predictions. The models involved in vitro corneal permeability measurements of 189 diverse compounds. Preliminary analysis of data showed that there is no significant correlation between corneal-PAMPA (Parallel Artificial Membrane Permeability Assay) permeability values and other pharmacokinetically relevant in silico drug transport parameters like Caco-2, jejunal permeability and blood-brain partition coefficient (logBB). Two different QSPR models were developed: one for corneal permeability and one for corneal membrane retention, based on experimental corneal-PAMPA permeability data. Partial least squares regression was applied for producing the models, which contained classical molecular descriptors and ECFP fingerprints in combination. A complex validation protocol (including internal and external validation) was carried out to provide robust and appropriate predictions for the permeability and membrane retention values. Both models had an overall fit of R2 > 0.90, including R2-values not lower than 0.85 for validation runs, and provide quick and accurate predictions of corneal permeability values for a diverse set of compounds.

Development of a microplate-format direct optode sensor for ultra-high-throughput environmental and wastewater monitoring of Pb2.

Although many Pb2+-selective optodes have been developed so far, methods using optical sensor membranes have not become widespread in environmental analytical practice. In order to create a bulk optode sensor, which can overcome all of the main drawbacks in the application of conventional optode membranes, - i.e., pH-dependence, long response time and the leakage of the ionic components - unusually thick PVC membrane was developed, embedded in microtiter plates and operated on a novel concept. This is the first reported work, which applies a plate-format optode as well as a direct optode-type sensing membrane for determination of Pb2+. We reported here also the first example for the application of an ionic component-free bulk optode membrane to avoid the membrane leakage, improve the regenerability and extend the lifetime of the membrane. The reported sensor has a LOD above 4.0 × 10-7 M (∼83 µg L-1), thus it is unsuitable for the effective monitoring of drinking waters, but considered to be a promising method for monitoring contamination episodes. On the other hand, the widest pH-independent working range of 4.3 < pH < 7.0 among bulk optodes reported in the literature was realized and an unprecedentedly fast response time of <10 s was achieved. The effectiveness of the applied method was investigated by measuring Pb2+-spiked multicomponent aqueous solutions as simulated environmental or wastewater samples containing near equimolar amounts of Ag+, Ca2+, Co2+, Cu2+, K+, Mg2+, Na+ and Zn2+ as acetate salts. In the presence of these potential competing ions with a concentration not greater than the typical ionic strength of surface freshwaters (∼10-3 M) the reported sensor proved to be appropriate for the selective detection of Pb2+ without any preparation of the samples (e.g., preconcentration, buffering, addition of excipients, etc.) with a required sample volume of only 100 µL. An outstanding analytical performance could be achieved within an average time of less, than 5 s/sample. The reported fluorescent probe is considered to be a promising method for replacing atomic absorption spectroscopy- (AAS), anodic stripping voltammetry- (ASV) or inductively coupled plasma- (ICP) based techniques as well as conventional ion-selective bulk membranes in high-throughput preliminary environmental monitoring of Pb2+, as it provides a cheap and unprecedentedly fast qualitative analysis of contaminated surface and wastewaters.

Magnetic Nanoparticles with Dual Surface Functions-Efficient Carriers for Metalloporphyrin-Catalyzed Drug Metabolite Synthesis in Batch and Continuous-Flow Reactors.

The dual functionalization of magnetic nanoparticles with inert (methyl) and reactive (aminopropyl) groups enables efficient immobilization of synthetic metalloporphyrins (such as 5,10,15,20-tetrakis(2,3,4,5,6-pentafluorophenyl)iron(II) porphyrin and 5,10,15,20-tetrakis-(4-sulfonatophenyl)iron(II) porphyrin) via covalent or ionic interactions. The proportion of reactive function on the surface has significant effect on the biomimetic activity of metalloporphyrins. The optimized magnetic nanocatalyst containing porphyrin was successfully applied for biomimetic oxidation of antihypertensive drug Amlodipine in batch and continuous-flow reactors as well.

Human Serum Albumin Binding in a Vial: A Novel UV-pH Titration Method To Assist Drug Design.

The knowledge on human serum albumin (HSA) binding is of utmost importance as it affects pharmacokinetic behavior and bioavailability of drugs. In this article, we report a novel method to screen for ionizable molecules with high HSA binding affinity based on pKa shifts using UV-pH titration. We investigated the HSA binding of 27 drugs and compared the results to experimental data from conventional methods. In most cases, significant shifts (ΔpKa > 0.1) were observed for drugs with high HSA binding, while no change could be detected for low-affinity binders. We showed the pivotal role of ionization centers in the formation of strong interactions between drug and HSA using molecular docking studies. We also verified our findings by testing five modified analogues designed by structural considerations. Significant decreases in their HSA binding proved that the UV-pH titration method combined with an in silico support can be used as a medicinal chemistry tool to assist rational molecular design.

Development of Meloxicam-Human Serum Albumin Nanoparticles for Nose-to-Brain Delivery via Application of a Quality by Design Approach.

The aim of this study was to optimize the formulation of meloxicam (MEL)-containing human serum albumin (HSA) nanoparticles for nose-to-brain via a quality by design (QbD) approach. Liquid and dried formulations of nanoparticles containing Tween 80 and without the surfactant were investigated. Various properties, such as the Z-average, zeta potential, encapsulation efficacy (EE), conjugation of MEL and HSA, physical stability, in vitro dissolution, in vitro permeability, and in vivo plasma and brain distribution of MEL were characterized. From a stability point of view, a solid product (Mel-HSA-Tween) is recommended for further development since it met the desired critical parameters (176 ± 0.3 nm Z-average, 0.205 ± 0.01 PdI, -14.1 ± 0.7 mV zeta potential) after 6 months of storage. In vitro examination showed a significantly increased drug dissolution and permeability of MEL-containing nanoparticles, especially in the case of applying Tween 80. The in vivo studies confirmed both the trans-epithelial and axonal transport of nanoparticles, and a significantly higher cerebral concentration of MEL was detected with nose-to-brain delivery, in comparison with intravenous or per os administration. These results indicate intranasal the administration of optimized MEL-containing HSA formulations as a potentially applicable "value-added" product for the treatment of neuroinflammation.

Comparison of Cinchona Catalysts Containing Ethyl or Vinyl or Ethynyl Group at Their Quinuclidine Ring.

Numerous cinchona organocatalysts with different substituents at their quinuclidine unit have been described and tested, but the effect of those saturation has not been examined before. This work presents the synthesis of four widely used cinchona-based organocatalyst classes (hydroxy, amino, squaramide, and thiourea) with different saturation on the quinuclidine unit (ethyl, vinyl, ethynyl) started from quinine, the most easily available cinchona derivative. Big differences were found in basicity of the quinuclidine unit by measuring the pKa values of twelve catalysts in six solvents. The effect of differences was examined by testing the catalysts in Michael addition reaction of pentane-2,4-dione to trans-ß-nitrostyrene. The 1.6-1.7 pKa deviation in basicity of the quinuclidine unit did not result in significant differences in yields and enantiomeric excesses. Quantum chemical calculations confirmed that the ethyl, ethynyl, and vinyl substituents affect the acid-base properties of the cinchona-thiourea catalysts only slightly, and the most active neutral thione forms are the most stable tautomers in all cases. Due to the fact that cinchonas with differently saturated quinuclidine substituents have similar catalytic activity in asymmetric Michael addition application of quinine-based catalysts is recommended. Its vinyl group allows further modifications, for instance, recycling the catalyst by immobilization.

Corneal-PAMPA: A novel, non-cell-based assay for prediction of corneal drug permeability.

The present study was aimed to develop an in vitro non-cell-based method, for the measurement of corneal permeability. To this avail, the parallel artificial membrane permeability assay (PAMPA) was used for studying the effects of composition of the artificial lipid membrane, the DMSO cosolvent content of the donor phase as well as different buffer solutions in the model. Based on experimental corneal permeability values of 25 active pharmaceutical ingredients (APIs), a final model with good predictive ability (R2 = 0.880) was developed and validated. The optimized conditions for the Corneal-PAMPA were the following: iso-pH conditions using phosphate buffer saline (PBS pH 7.4) without cosolvent, phosphatidylcholine (10.7 w/v %; without cholesterol) dissolved in a mixture of hexane:dodecane:chloroform = 70:25:5 (v/v) as an artificial membrane, 4 h incubation of the PAMPA plates at 35 °C. The model's applicability in the case of diluted solutions of eye drops was also demonstrated.

Brief overview of solubility methods: Recent trends in equilibrium solubility measurement and predictive models.

Solubility is a crucial physicochemical parameter affecting the whole process of drug discovery and development. Thus, understanding of the methods and concepts to measure and predict this propensity are of utmost importance for the pharmaceutical scientist. Despite their inherent limitations, kinetic solubility screening methods became routine assays by mimicking bioassay conditions and guiding the lead optimization process. In contrast, thermodynamic solubility methods show a clear evolution: miniaturized high throughput assays coupled to analytical techniques such as solid-state characterization, ultra performance liquid chromatography, or polychromatic turbidimetry, have been developed, thereby enabling a more complex physicochemical profiling at the early discovery stage. Solubility prediction still poses a significant challenge at the industrial level. Classification and critical evaluation of recent in silico models are provided. Discussion of experimental and computational methods: was based on relevant industrial references.

Novel medium-throughput technique for investigating drug-cyclodextrin complexation by pH-metric titration using the partition coefficient method.

The present study was aimed to develop a medium-throughput screening technique for investigation of cyclodextrin (CD)-active pharmaceutical ingredient (API) complexes. Dual-phase potentiometric lipophilicity measurement, as gold standard technique, was combined with the partition coefficient method (plotting the reciprocal of partition coefficients of APIs as a function of CD concentration). A general equation was derived for determination of stability constants of 1:1 CD-API complexes (K1:1,CD) based on solely the changes of partition coefficients (logPo/wN-logPappN), without measurement of the actual API concentrations. Experimentally determined logP value (-1.64) of 6-deoxy-6[(5/6)-fluoresceinylthioureido]-HPBCD (FITC-NH-HPBCD) was used to estimate the logP value (≈ -2.5 to -3) of (2-hydroxypropyl)-ß-cyclodextrin (HPBCD). The results suggested that the amount of HPBCD can be considered to be inconsequential in the octanol phase. The decrease of octanol volume due to the octanol-CD complexation was considered, thus a corrected octanol-water phase ratio was also introduced. The K1:1,CD values obtained by this developed method showed a good accordance with the results from other orthogonal methods.

Synthesis and pKa determination of new enantiopure dimethyl-substituted acridino-crown ethers containing a carboxyl group: Useful candidates for enantiomeric recognition studies.

New enantiopure dimethyl-substituted acridino-18-crown-6 and acridino-21-crown-7 ethers containing a carboxyl group at position 9 of the acridine ring [(S,S)-8, (S,S)-9, (R,R)-10] were synthesized. The pKa values of the new crown ethers [(S,S)-8, (S,S)-9, (R,R)-10] and of an earlier reported macrocycle [(R,R)-2] were determined by UV-pH titrations. Crown ether (S,S)-8 was attached to silica gel by covalent bonds and the enantiomeric separation ability of the newly prepared chiral stationary phase [(S,S)-CSP-12] was studied by high-performance liquid chromatography (HPLC). Homochiral preference was observed and the best separation was achieved for the enantiomers of 1-NEA. Ligands (S,S)-9 and (R,R)-10 are precursors of enantioselective sensor and selector molecules for the enantiomers of protonated primary amines, amino acids, and their derivatives.

Proton dissociation properties of arylphosphonates: Determination of accurate Hammett equation parameters.

Determination of the proton dissociation constants of several arylphosphonic acid derivatives was carried out to investigate the accuracy of the Hammett equations available for this family of compounds. For the measurement of the pKa values modern, accurate methods, such as the differential potentiometric titration and NMR-pH titration were used. We found our results significantly different from the pKa values reported before (pKa1: MAE = 0.16 pKa2: MAE=0.59). Based on our recently measured pKa values, refined Hammett equations were determined that might be used for predicting highly accurate ionization constants of newly synthesized compounds (pKa1=1.70-0.894σ, pKa2=6.92-0.934σ).

Investigation and Mathematical Description of the Real Driving Force of Passive Transport of Drug Molecules from Supersaturated Solutions.

The aim of this study was to investigate the impact of formulation excipients and solubilizing additives on dissolution, supersaturation, and membrane transport of an active pharmaceutical ingredient (API). When a poorly water-soluble API is formulated to enhance its dissolution, additives, such as surfactants, polymers, and cyclodextrins, have an effect not only on dissolution profile but also on the measured physicochemical properties (solubility, pKa, permeability) of the drug while the excipient is present, therefore also affecting the driving force of membrane transport. Meloxicam, a nonsteroidal anti-inflammatory drug, was chosen as a poorly water-soluble model drug and formulated in order to enhance its dissolution using solvent-based electrospinning. Three polyvinylpyrrolidone (PVP) derivatives (K30, K90, and VA 64), Soluplus, and (2-hydroxypropyl)-ß-cyclodextrin were used to create five different amorphous solid dispersions of meloxicam. Through experimental design, the various formulation additives that could influence the characteristics of dissolution and permeation through artificial membrane were observed by carrying out a simultaneous dissolution-permeation study with a side-by-side diffusion cell, µFLUX. Although the dissolution profiles of the formulations were found to be very similar, in the case of Soluplus containing formulation the flux was superior, showing that the driving force of membrane transport cannot be simplified to the concentration gradient. Supersaturation gradient, the difference in degree of supersaturation (defined as the ratio of dissolved amount of the drug to its thermodynamic solubility) between the donor and acceptor side, was found to be the driving force of membrane transport. It was mathematically derived from Fick's first law, and experimentally proved to be universal on several meloxicam containing ASDs and DMSO stock solution.

Tuning the predictive capacity of the PAMPA-BBB model.

Due to its robustness and versatility, several variations of the blood-brain barrier specific parallel artificial membrane permeability assay (PAMPA-BBB) have been reported in the central nervous system (CNS) drug discovery practice. In this study, the impact of the main assay parameters on the predictive power of PAMPA-BBB was thoroughly investigated with 27, passively BBB-transported drug molecules with in vivo logBB data. The single and combined effects of the following variables were systematically studied and optimized: incubation time and temperature (4 vs. 18h, RT vs. 37°C), type of the read-out (UV-reader vs. HPLC), solvent composition (n-dodecane/n-hexane), lipid concentration (0-10w/v % PBLE), cholesterol content (0-1.66w/v %), and thickness of the lipid membrane, and the DMSO cosolvent content (5-20v/v %), respectively. Based on our results, solvent-driven and lipid-driven mechanisms of diffusion were identified in different assay conditions. Moreover, the analysis of membrane retention (MR%; the mole fraction of solute "lost" to the membrane) data obtained at various membrane compositions (volume of solvent and concentration of phospholipids) revealed the compound-specific nature of this parameter. The optimized conditions for the PAMPA-BBB were the following: 4h incubation at 37°C, detection by HPLC-DAD, iso-pH conditions (pH=7.4) with 5v/v % DMSO content in buffer solutions, and PBLE (10w/v %; without cholesterol) as membrane dissolved in the mixture of n-hexane:n-dodecane 3:1.