RESUMEN
Considerable focus on tin-based perovskites lies on substitution to leadhalide perovskites for the fabrication of eco-friendly optoelectronic devices.The major concern related to tin-based perovskite devices are mainly thestability and the efficiency. However, thinking on the final commercializationscope, other considerations such as precursor stability and cost are majorfactors to carry about. In this regard, this work presents a robust and facilesynthesis of 2D A2SnX4 (A = 4-fluorophenethylammonium(4-FPEA); X = I, Br, I/Br) and 3D FASnI3 perovskite microcrystals followinga developed synthesis strategy with low-cost starting materials. In thisdeveloped methodology, acetic acid is used as a solvent, which helps to protectfrom water by making a hydrophobic network over the perovskite surface, andhence provides sufficient ambient and long-term inert atmosphere stability ofthe microcrystals. Further, the microcrystals are recrystallized in thin filmsfor LED application, allowing the fabrication of orange, near-infrared and purered emitting LEDs. The two-step recrystallized devices show better performanceand stability in comparison to the reference devices made by using commercialprecursors. Importantly, the developed synthesis methodology is defined as ageneric method for the preparation of varieties of hybrid tin-based perovskitesmicrocrystals and application in optoelectronic devices.
RESUMEN
The generation of stable white light emission using lead-free perovskites remains a huge challenge in the development of future display and lighting technologies, due to fast material deterioration and the decrease of the color quality. In this work, we report a combination of diverse types of 2D A2SnX4 (A = bulky cation, X = Br, I) perovskites exhibiting self-trapped exciton (STE) emission and blue luminescent carbon quantum dots (CQDs), with the purpose of generating A2SnX4/CQD inks with a broadband emission in the visible region and a tunable white light color. By varying the concentration of the 2D perovskite, the white emission of the mixtures is modulated to cool, neutral, and warm tonalities, with a PL quantum yield up to 45%. From the combinations, the PEA2SnI4/CQD-based ink shows the longest stability, due to suitable surface ligand passivation provided by the capping ligands covering the CQDs, compensating the defect sites in the perovskite. Then, by incorporating the PEA2SnI4/CQDs inks into an acrylate polymer matrix, the quenching of the PL component from the perovskite was restrained, being stable for >400 h under ambient conditions and at a relative humidity of â¼50%, and allowing the preparation of complex 3D-printed composites with stable white emission tonalities. This contribution offers an application of STE-based Sn-perovskites to facilitate the future fabrication of lead-free white-light optoelectronic devices.
RESUMEN
Perovskite nanocrystals (PeNCs) synthesized by colloidal solution methods are an outstanding case of study due to their remarkable optical features, different from their bulk counterpart, such as a tuneable band gap and narrower photoluminescence emission, altered by the size and shape. However, the stability of these systems needs to be improved to consolidate their application in optoelectronic devices. Improved PeNC quality is associated with a less defective structure, as it affects negatively the photoluminescence quantum yield (PLQY), due to the essential, but at the same time labile interaction between the colloidal capping ligands and the perovskite core. In this sense, it would be extremely effective to obtain an alternative method to stabilize the PeNC phases and passivate the surface, in order to improve both stability and optical properties. This objective can be reached exploiting the structural benefits of the interaction between the perovskite and other organic or inorganic materials with a compatible structure and optical properties and limiting the optical drawbacks. This perspective contemplates different combinations of core/shell PeNCs and the critical steps during the synthesis, including drawbacks and challenges based on their optical properties. Additionally, it provides insights for future light emitting diode (LED) applications and advanced characterization. Finally, the existing challenges and opportunities for core/shell PeNCs are discussed.
RESUMEN
We have designed a synthesis procedure to obtain Cs2SnCl6 nanocrystals (NCs) doped with metal ion(s) to emit visible light. Cs2SnCl6 NCs doped with Bi3+, Te4+ and Sb3+ ions emitted blue, yellow and red light, respectively. In addition, NCs simultaneously doped with Bi3+ and Te4+ ions were synthesized in a single run. Combination of both dopant ions together gives rise to the white emission. The photoluminescence quantum yields of the blue, yellow and white emissions are up to 26.5, 28, and 16.6%, respectively under excitation at 350, 390, and 370 nm. Pure white-light emission with CIE chromaticity coordinates of (0.32, 0.33) and (0.32, 0.32) at 340 and 370 nm excitation wavelength, respectively, was obtained. The as-prepared NCs were found to demonstrate a long-time stability, resistance to humidity, and an ability to be well-dispersed in polar solvents without property degradation due to their hydrophilicity, which could be of significant interest for wide application purposes.
RESUMEN
Physical insights related to ion equilibrium involved in the synthesis of lead halide perovskite nanocrystals remain key parameters for regulating the phase stability and luminescence intensity of these emerging materials. These have been extensively studied since the development of these nanocrystals, and different reaction processes controlling the formation of CsPbX3 nanocrystals are largely understood. However, growth kinetics related to the formation of these nanocrystals have not been established yet. Hence, more fundamental understanding of the formation processes of these nanocrystals is urgently required. Keeping these in mind and emphasizing the most widely studied nanocrystals of CsPbBr3, different equilibrium processes involved in their synthesis for phase and composition variations are summarized and discussed in this Perspective. In addition, implementations of these findings for shape modulations by growth are discussed, and several new directions of research for understanding more fundamental insights are also presented.
RESUMEN
Doping Mn2+ in semiconductor nanocrystals is widely known for its long-lifetime Mn d-d orange emission. While this had been extensively studied for chalcogenide nanostructures, recently this was also extended to perovskite nanocrystals. Being that CsPbCl3 has a wide bandgap, the exciton energy transfer was found to be more efficient, but the dopant-induced photoluminescence was also obtained for layered perovskites and quantum-confined CsPbBr3 nanocrystals. In recent years significant advances have been achieved in understanding the physical insights of doping following various approaches and optimizing the conditions for obtaining intense dopant emission. In addition, several new properties associated with these doped nanocrystals were also reported, and by modulating the compositions, the host bandgap and the dopant emission positions were also tuned. Keeping all of these developments in mind, this Perspective focuses on the insights of doping and the photoluminescence properties of Mn2+-doped perovskite nanocrystals. In addition, it also proposes possible future prospects of both synthesis and optical properties of these nanomaterials.
RESUMEN
Pretreatment using metal chlorides during the formation of halide deficient free perovskite nanocrystals is reported. Among several metal chlorides, Cu(II)Cl2 was observed to be ideal for the synthesis of highly emitting CsPbCl3 nanocrystals at high reaction temperature. Because high temperature remained more favorable for the dopant insertion, doping of Mn(II) was carried out under this halide-rich system, and nearly 68% photoluminescence quantum yield was recorded. Analysis could not provide strong evidence of insertion of Cu(II) inside the nanocrystals; rather, it was established that Cu(II)Cl2 in the system helped to stabilize the reaction even at and above 260 °C and provided an adequate chloride source for obtaining the highly emitting host as well as doped nanocrystals. Details of the physical process involved for this metal ion-induced uplifting of the reaction temperature and the consequent impacts on the nanocrystal formation are studied in detail and reported in this Letter.
RESUMEN
Annealing perovskite nanocrystals at high reaction temperature changes their crystal phase, shape, and optical properties. Carrying out reactions between 180 and 250 °C, the impact of thermal annealing for CsPbCl3 and CsPbBr3 nanocrystals in a reaction flask was investigated here. At higher temperature, a phase change was observed instantly, which could not be trapped even with ice-bath cooling. Interestingly, using a calculated amount of preformed alkylammonium halides as dual passivating agents, the nanocrystals of both CsPbCl3 and CsPbBr3 could even be stabilized for hours of annealing at 250 °C. CsPbCl3, which was reported to be a poor emissive nanocrystal in comparison to CsPbBr3, could sustain even more than 5 h of annealing at 250 °C and recorded â¼51% absolutely quantum yield. Details of the interface chemistry and the role of the used dual passivating agent for providing thermal stability are studied and reported in this Letter.
RESUMEN
High-energy-emitting CsPbCl3 nanocrystals have shown significant loss and enhancement of their emission intensity (â¼40-50 folds) during purification and surface treatments, respectively. This confirms that the surfaces of these nanocrystals are very sensitive. In this Letter, physical insights of the interface bindings on the surface of these blue-emitting CsPbCl3 nanocrystals with different passivating agents and their consequential impact on purification are investigated. Using various metal chlorides irrespective of the charge and size of the metal ions, metal acetates, and nonmetal chloride, the predominant influence of chloride ions in helping retrieve/intensify the blue emission is established. The purification processes are observed to be very delicate, and successive purifications with introduction of polar nonsolvents led to the transformation of an emitting cubic CsPbCl3 phase to nonemitting tetragonal CsPb2Cl5 phase nanocrystals irreversibly. The impact of various salt additions only temporarily helped in enhancing the emission, but the phase change remained inevitable upon successive purification. However, as a remedy, by in situ use of alkylammonium chloride salt in high-temperature reactions, the surface binding was improved, and significant emission as well as the phase could be retained with successive purifications.
RESUMEN
High temperature colloidal synthesis for obtaining thermal, colloidal and phase-stable CsPbI3 nanocrystals with near-unity quantum yield is reported. While standard perovskite synthesis reactions were carried out at 160 °C (below 200 °C), increase of another ≈100 °C enabled the alkylammonium ions to passivate the surface firmly and prevented the nanocrystals from phase transformation. This did not require any inert atmosphere storage, use of heteroatoms, specially designed ligands, or the ice cooling protocol. Either at high temperature in reaction flask or in the crude mixture or purified dispersed solution; these nanocrystals were observed stable and retained the original emission. Different spectroscopic analyses were carried out and details of the surface binding of alkyl ammonium ligands in place of surface Cs in the crystal lattice were investigated. As CsPbI3 is one of the most demanding optical materials, bringing stability by proper surface functionalization without use of secondary additives would indeed help in wide spreading of their applications.
RESUMEN
Doping in perovskite nanocrystals adopts different mechanistic approach in comparison to widely established doping in chalcogenide quantum dots. The fast formation of perovskites makes the dopant insertions more competitive and challenging. Introducing alkylamine hydrochloride (RNH3 Cl) as a promoting reagent, precise controlled doping of MnII in CsPbCl3 perovskite nanocrystals is reported. Simply, by changing the amount of RNH3 Cl, the Mn incorporation and subsequent tuning in the excitonic as well as Mn d-d emission intensities are tailored. Investigations suggested that RNH3 Cl acted as the chlorinating source, controlled the size, and also helps in increasing the number of particles. This provided more opportunity for Mn ions to take part in reaction and occupied the appropriate lattice positions. Carrying out several reactions with varying reaction parameters, the doping conditions are optimized and the role of the promoting reagent for both doped and undoped systems are compared.
RESUMEN
Introducing a few atoms of impurities or dopants in semiconductor nanocrystals can drastically alter the existing properties or even introduce new properties. For example, mid-gap states created by doping tremendously affect photocatalytic activities and surface controlled redox reactions, generate new emission centers, show thermometric optical switching, make FRET donors by enhancing the excited state lifetime, and also create localized surface plasmon resonance induced low energy absorption. In addition, researchers have more recently started focusing their attention on doped nanocrystals as an important and alternative material for solar energy conversion to meet the current demand for renewable energy. Moreover, the electrical and magnetic properties of the host are also strongly altered on doping. These beneficial dopant-induced changes suggest that doped nanocrystals with proper selections of dopant-host pairs may be helpful for generating designer materials for a wide range of current technological needs. How properties relate to the doping of a variety of semiconductor nanocrystals are summarized in this Review.