Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 18 de 18
Filtrar
Más filtros











Base de datos
Intervalo de año de publicación
1.
Emergent Mater ; 5(2): 307-314, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-33778372

RESUMEN

Long-term stabilization of DNA is needed for forensic, clinical, in-field operations and numerous other applications. Although freezing (<-20 °C) and dry storage are currently the preferential methods for long-term storage, a noticeable pre-analytical degradation of DNA over time, upfront capital investment and recurring costs have demonstrated a need for an alternative long-term room-temperature preservation method. Herein, we report a novel, fast (~5 min) silica sol-gel preparation method using a standard microwave-initiated polymerization reaction amenable to stabilization of DNA. The method involves use of one chemical, tetramethoxy silane (TMOS) and eliminates the use of alcohol as co-solvent and catalysts such as acids. In addition, the process involves minimal technical expertise, thus making it an ideal choice for resource-challenged countries and in-field applications. The sol-gel is capable to store and stabilize Escherichia coli DNA in ambient conditions for 210 days. DNA recovered from the sol-gel showed no significant nucleolytic and/or oxidative degradation, outperforming conventional storage conditions at -20 °C, and reported state-of-the-art technology. Supplementary Information: The online version contains supplementary material available at 10.1007/s42247-021-00208-3.

2.
Sci Adv ; 2(3): e1501178, 2016 03.
Artículo en Inglés | MEDLINE | ID: mdl-27034981

RESUMEN

Graphitic materials are essential in energy conversion and storage because of their excellent chemical and electrical properties. The strategy for obtaining functional graphitic materials involves graphite oxidation and subsequent dissolution in aqueous media, forming graphene-oxide nanosheets (GNs). Restacked GNs contain substantial intercalated water that can react with heteroatom dopants or the graphene lattice during reduction. We demonstrate that removal of intercalated water using simple solvent treatments causes significant structural reorganization, substantially affecting the oxygen reduction reaction (ORR) activity and stability of nitrogen-doped graphitic systems. Amid contrasting reports describing the ORR activity of GN-based catalysts in alkaline electrolytes, we demonstrate superior activity in an acidic electrolyte with an onset potential of ~0.9 V, a half-wave potential (E ½) of 0.71 V, and a selectivity for four-electron reduction of >95%. Further, durability testing showed E ½ retention >95% in N2- and O2-saturated solutions after 2000 cycles, demonstrating the highest ORR activity and stability reported to date for GN-based electrocatalysts in acidic media.


Asunto(s)
Grafito/química , Nitrógeno/química , Agua/química , Catálisis , Electroquímica , Modelos Teóricos , Oxidación-Reducción , Óxidos/química , Oxígeno/química , Solventes , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos X
3.
J Phys Chem B ; 119(40): 12868-76, 2015 Oct 08.
Artículo en Inglés | MEDLINE | ID: mdl-26390189

RESUMEN

Cell membranes perform important biological roles including compartmentalization, signaling, and transport of nutrients. Supported lipid membranes mimic the behavior of cell membranes and are an important model tool for studying membrane properties in a controlled laboratory environment. Lipid membranes may be supported on solid substrates; however, protein and lipid interactions with the substrate typically result in their denaturation. In this report, we demonstrate the formation of intact lipid membranes tethered on nanoporous metal thin films obtained via a dealloying process. Uniform lipid membranes were formed when the surface defect density of the nanoporous metal film was significantly reduced through a two-step dealloying process reported here. We show that the tethered lipid membranes on nanoporous metal substrates maintain both fluidity and electrical resistivity, which are key attributes to naturally occurring lipid membranes. The lipid assemblies supported on nanoporous metals provide a new platform for investigating lipid membrane properties, and potentially membrane proteins, for numerous applications including next generation biosensor platforms, targeted drug-delivery, and energy harvesting devices.


Asunto(s)
Lípidos de la Membrana/química , Nanoporos , Microscopía Electrónica de Rastreo
4.
ACS Nano ; 9(3): 2981-8, 2015 Mar 24.
Artículo en Inglés | MEDLINE | ID: mdl-25668323

RESUMEN

Graphene oxide (GO) has emerged as a multifunctional material that can be synthesized in bulk quantities and can be solution processed to form large-area atomic layered photoactive, flexible thin films for optoelectronic devices. This is largely due to the potential ability to tune electrical and optical properties of GO using functional groups. For the successful application of GO, it is key to understand the evolution of its optoelectronic properties as the GO undergoes a phase transition from its insulating and optically active state to the electrically conducting state with progressive reduction. In this paper, we use a combination of electrostatic force microscopy (EFM) and optical spectroscopy to monitor the emergence of the optoelectronic properties of GO with progressive reduction. EFM measurements enable, for the first time, direct visualization of charge propagation along the conducting pathways that emerge on progressively reduced graphene oxide (rGO) and demonstrate that with the increasing degree of reduction, injected charges can rapidly migrate over a distance of several micrometers, irrespective of their polarities. Direct imaging reveals the presence of an insurmountable potential barrier between reduced GO (rGO) and GO, which plays the decisive role in the charge transport. We complement charge imaging with theoretical modeling using quantum chemistry calculations that further demonstrate that the role of barrier in regulating the charge transport. Furthermore, by correlating the EFM measurements with photoluminescence imaging and electrical conductivity studies, we identify a bifunctional state in GO, where the optical properties are preserved along with good electrical conductivity, providing design principles for the development of GO-based, low-cost, thin-film optoelectronic applications.

5.
Angew Chem Int Ed Engl ; 53(14): 3588-93, 2014 Apr 01.
Artículo en Inglés | MEDLINE | ID: mdl-24677748

RESUMEN

Graphene oxide (GO) contains several chemical functional groups that are attached to the graphite basal plane and can be manipulated to tailor GO for specific applications. It is now revealed that the reaction of GO with ozone results in a high level of oxidation, which leads to significantly improved ionic (protonic) conductivity of the GO. Freestanding ozonated GO films were synthesized and used as efficient polymer electrolyte fuel cell membranes. The increase in protonic conductivity of the ozonated GO originates from enhanced proton hopping, which is due to the higher content of oxygenated functional groups in the basal planes and edges of ozonated GO as well as the morphology changes in GO that are caused by ozonation. The results of this study demonstrate that the modification of dispersed GO presents a powerful opportunity for optimizing a nanoscale material for proton-exchange membranes.

6.
ACS Nano ; 7(6): 5300-7, 2013 Jun 25.
Artículo en Inglés | MEDLINE | ID: mdl-23706112

RESUMEN

Phospholipid-based nanomaterials are of interest in several applications including drug delivery, sensing, energy harvesting, and as model systems in basic research. However, a general challenge in creating functional hybrid biomaterials from phospholipid assemblies is their fragility, instability in air, insolubility in water, and the difficulty of integrating them into useful composites that retain or enhance the properties of interest, therefore limiting there use in integrated devices. We document the synthesis and characterization of highly ordered and stable phospholipid-silica thin films that resemble multilamellar architectures present in nature such as the myelin sheath. We have used a near room temperature chemical vapor deposition method to synthesize these robust functional materials. Highly ordered lipid films are exposed to vapors of silica precursor resulting in the formation of nanostructured hybrid assemblies. This process is simple, scalable, and offers advantages such as exclusion of ethanol and no (or minimal) need for exposure to mineral acids, which are generally required in conventional sol-gel synthesis strategies. The structure of the phospholipid-silica assemblies can be tuned to either lamellar or hexagonal organization depending on the synthesis conditions. The phospholipid-silica films exhibit long-term structural stability in air as well as when placed in aqueous solutions and maintain their fluidity under aqueous or humid conditions. This platform provides a model for robust implementation of phospholipid multilayers and a means toward future applications of functional phospholipid supramolecular assemblies in device integration.


Asunto(s)
Materiales Biomiméticos/química , Fosfolípidos/química , Dióxido de Silicio/química , Materiales Biomiméticos/síntesis química , Membrana Dobles de Lípidos/química , Modelos Moleculares , Conformación Molecular , Fosfolípidos/síntesis química , Silicatos/química
7.
ACS Nano ; 5(8): 6686-94, 2011 Aug 23.
Artículo en Inglés | MEDLINE | ID: mdl-21790146

RESUMEN

A general challenge in generating functional materials from nanoscale components is integrating them into useful composites that retain or enhance their properties of interest. Development of single walled carbon nanotube (SWNT) materials for optoelectronics and sensing has been especially challenging in that SWNT optical and electronic properties are highly sensitive to environmental interactions, which can be particularly severe in composite matrices. Percolation of SWNTs into aqueous silica gels shows promise as an important route for exploiting their properties, but retention of the aqueous and surfactant environment still impacts and limits optical response, while also limiting the range of conditions in which these materials may be applied. Here, we present for the first time an innovative approach to obtain highly fluorescent solution-free SWNT-silica aerogels, which provides access to novel photophysical properties. Strongly blue-shifted spectral features, revelation of new diameter-dependent gas-phase adsorption phenomena, and significant increase (approximately three times that at room temperature) in photoluminescence intensities at cryogenic temperatures all indicate greatly reduced SWNT-matrix interactions consistent with the SWNTs experiencing a surfactant-free environment. The results demonstrate that this solid-state nanomaterial will play an important role in further revealing the true intrinsic SWNT chemical and photophysical behaviors and represent for the first time a promising new solution- and surfactant-free material for advancing SWNT applications in sensing, photonics, and optoelectronics.

8.
Bioconjug Chem ; 20(12): 2381-4, 2009 Dec.
Artículo en Inglés | MEDLINE | ID: mdl-19928952

RESUMEN

A robust method to immobilize a maltose biosensor is described using an engineered maltose periplasmic binding protein (PBP) covalently coupled to NBDamide, an environmentally sensitive fluorophore. A mesoporous silica sol-gel derived from diglycerylsilane (DGS) was constructed to embed the maltose biosensor, and the ligand reporting fluorescence properties were measured. When sequestered in the DGS-derived silica matrix, the biosensor retained maltose-dependent fluorescence sensing capability with micromolar affinity, which is consistent with the protein free in solution. The MBP-NBD conjugate was further modified by covalent conjugation with poly(ethylene glycol)-5000 (PEG) to promote the retention of water molecules around the protein and to reduce possible steric effects between the silica matrix and protein. Bioconjugation with PEG molecules does not significantly affect the signaling response of the protein in solution. When immobilized in the DGS polymer, a consistent increase in fluorescence intensity was observed as compared to the protein not functionalized with PEG. To our knowledge, this report presents the first successful method to embed a PBP biosensor in a polymerized matrix and retain signaling response using an environmentally sensitive probe. The immobilization method presented here should be easily adaptable to all conformation-dependent biosensors.


Asunto(s)
Técnicas Biosensibles , Materiales Biocompatibles Revestidos/química , Maltosa/química , Polietilenglicoles/química , Dióxido de Silicio/química , Geles/química , Porosidad , Propiedades de Superficie
9.
Langmuir ; 24(5): 2240-7, 2008 Mar 04.
Artículo en Inglés | MEDLINE | ID: mdl-18229965

RESUMEN

We report a general procedure to prepare functional organic thin films for biological assays on oxide surfaces. Silica surfaces were functionalized by self-assembly of an amine-terminated silane film using both vapor- and solution-phase deposition of 3'-aminopropylmethyldiethoxysilane (APMDES). We found that vapor-phase deposition of APMDES under reduced pressure produced the highest quality monolayer films with uniform surface coverage, as determined by atomic force microscopy (AFM), ellipsometry, and contact angle measurements. The amine-terminated films were chemically modified with a mixture of carboxylic acid-terminated poly(ethylene glycol) (PEG) chains of varying functionality. A fraction of the PEG chains (0.1-10 mol %) terminated in biotin, which produced a surface with an affinity toward streptavidin. When used in pseudo-sandwich assays on waveguide platforms for the detection of Bacillus anthracis protective antigen (PA), these functional PEG surfaces significantly reduced nonspecific binding to the waveguide surface while allowing for highly specific binding. Detection of PA was used to validate these films for sensing applications in both buffer and complex media. Ultimately, these results represent a step toward the realization of a robust, reusable, and autonomous biosensor.


Asunto(s)
Antígenos Bacterianos/análisis , Toxinas Bacterianas/análisis , Polietilenglicoles/química , Silanos/química , Antígenos Bacterianos/química , Microscopía de Fuerza Atómica , Estructura Molecular , Propiedades de Superficie , Volatilización
10.
ACS Nano ; 2(11): 2283-90, 2008 Nov 25.
Artículo en Inglés | MEDLINE | ID: mdl-19206394

RESUMEN

We present a new approach for the preparation of single walled carbon nanotube silica composite materials that retain the intrinsic fluorescence characteristics of the encapsulated nanotubes. Incorporation of isolated nanotubes into optically transparent matrices, such as sol-gel prepared silica, to take advantage of their near-infrared emission properties for applications like sensing has been a challenging task. In general, the alcohol solvents and acidic conditions required for typical sol-gel preparations disrupt the nanotube/surfactant assembly and cause the isolated nanotubes to aggregate leading to degradation of their fluorescence properties. To overcome these issues, we have used a sugar alcohol modified silica precursor molecule, diglycerylsilane, for encapsulation of nanotubes in silica under aqueous conditions and at neutral pH. The silica/nanotube composite materials have been prepared as monoliths, at least 5 mm thick, or as films (<1 mm) and were characterized using fluorescence and Raman spectroscopy. In the present work we have investigated the fluorescence characteristics of the silica encapsulated carbon nanotubes by means of redox doping studies as well as demonstrated their potential for biosensing applications. Such nanotube/silica composite systems may allow for new sensing and imaging applications that are not currently achievable.


Asunto(s)
Fluorescencia , Nanotubos de Carbono/química , Óptica y Fotónica , Dióxido de Silicio/química , Alcoholes/química , Técnicas Biosensibles , Cristalización , Electroquímica/métodos , Concentración de Iones de Hidrógeno , Ensayo de Materiales , Nanotecnología/métodos , Nanotubos/química , Oxidación-Reducción , Propiedades de Superficie , Tensoactivos
11.
Nano Lett ; 7(8): 2446-51, 2007 Aug.
Artículo en Inglés | MEDLINE | ID: mdl-17629349

RESUMEN

The integration of ion-channel transport functions with responses derived from nanostructured and nanoporous silica mesophase materials is demonstrated. Patterned thin-film mesophases consisting of alternating hydrophilic nanoporous regions and hydrophobic nanostructured regions allow for spatially localized proton transport via selective dimerization of gramicidin in lipid bilayers formed on the hydrophilic regions. The adjoining hydrophobic mesostructure doped with a pH sensitive dye reports the transport. The ease of integrating functional membranes and reporters through the use of patterned mesophases should enable high throughput studies of membrane transport.


Asunto(s)
Gramicidina/química , Activación del Canal Iónico , Canales Iónicos/química , Membrana Dobles de Lípidos/química , Fluidez de la Membrana , Microscopía Fluorescente/métodos , Fosfolípidos/química , Protones
12.
Expert Rev Proteomics ; 3(1): 153-61, 2006 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-16445359

RESUMEN

Laser desorption/ionization mass spectrometry (MS) is rapidly growing in popularity as an analytical characterization method in several fields. The technique shot to prominence using matrix-assisted desorption/ionization for large biomolecules (>700 Da), such as proteins, peptides and nucleic acids. However, because the matrix, which consists of small organic molecules, is also ionized, the technique is of limited use in the low-molecular-mass range (<700 Da). Recent advances in surface science have facilitated the development of matrix-free laser desorption/ionization MS approaches, which are referred to here as surface-assisted laser desorption/ionization (SALDI) MS. In contrast to traditional matrix-assisted techniques, the materials used for SALDI-MS are not ionized, which expands the usefulness of this technique to small-molecule analyses. This review discusses the current status of SALDI-MS as a standard analytical technique, with an emphasis on potential applications in proteomics.


Asunto(s)
Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Nanotubos de Carbono/ultraestructura , Polímeros/química , Proteómica , Semiconductores
13.
J Am Chem Soc ; 127(18): 6752-65, 2005 May 11.
Artículo en Inglés | MEDLINE | ID: mdl-15869298

RESUMEN

We have studied the spreading of phospholipid vesicles on photochemically patterned n-octadecylsiloxane monolayers using epifluorescence and imaging ellipsometry measurements. Self-assembled monolayers of n-octadecylsiloxanes were patterned using short-wavelength ultraviolet radiation and a photomask to produce periodic arrays of patterned hydrophilic domains separated from hydrophobic surroundings. Exposing these patterned surfaces to a solution of small unilamellar vesicles of phospholipids and their mixtures resulted in a complex lipid layer morphology epitaxially reflecting the underlying pattern of hydrophilicity. The hydrophilic square regions of the photopatterned OTS monolayer reflected lipid bilayer formation, and the hydrophobic OTS residues supported lipid monolayers. We further observed the existence of a boundary region composed of a nonfluid lipid phase and a lipid-free moat at the interface between the lipid monolayer and bilayer morphologies spontaneously corralling the fluid bilayers. The outer-edge of the boundary region was found to be accessible for subsequent adsorption by proteins (e.g., streptavidin and BSA), but the inner-edge closer to the bilayer remained resistant to adsorption by protein or vesicles. Mechanistic implications of our results in terms of the effects of substrate topochemical character are discussed. Furthermore, our results provide a basis for the construction of complex biomembrane models, which exhibit fluidity barriers and differentiate membrane properties based on correspondence between lipid leaflets. We also envisage the use of this construct where two-dimensionally fluid, low-defect lipid layers serve as sacrificial resists for the deposition of protein and other material patterns.


Asunto(s)
Fluoresceína-5-Isotiocianato/análogos & derivados , Fosfolípidos/química , Silanos/química , Adsorción , Dimiristoilfosfatidilcolina/química , Fluoresceína-5-Isotiocianato/química , Colorantes Fluorescentes/química , Membrana Dobles de Lípidos/química , Fluidez de la Membrana , Microscopía Fluorescente , Fosfatidilcolinas/química , Fotoblanqueo , Albúmina Sérica Bovina/química , Estreptavidina/química
14.
Langmuir ; 21(7): 2865-70, 2005 Mar 29.
Artículo en Inglés | MEDLINE | ID: mdl-15779959

RESUMEN

Single bilayer membranes of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) were formed on ordered nanocomposite and nanoporous silica thin films by fusion of small unilamellar vesicles. The structure of these membranes was investigated using neutron reflectivity. The underlying thin films were formed by evaporation induced self-assembly to obtain periodic arrangements of silica and surfactant molecules in the nanocomposite thin films, followed by photocalcination to oxidatively remove the organics and render the films nanoporous. We show that this platform affords homogeneous and continuous bilayer membranes that have promising applications as model membranes and sensors.


Asunto(s)
Nanoestructuras/química , Neutrones , Dióxido de Silicio/química , Membrana Dobles de Lípidos/química , Microscopía Electrónica de Transmisión , Nanoestructuras/ultraestructura
15.
Chem Commun (Camb) ; (7): 939-41, 2005 Feb 21.
Artículo en Inglés | MEDLINE | ID: mdl-15700088

RESUMEN

A series of N-alkyl-N-methylpyrrolidinium bromide salts (C14, C16, or C18) have been explored as templates for the synthesis of ordered, mesoporous silica films; "soft" annealing based on deep-UV calcination is also reported.

16.
J Phys Chem B ; 109(30): 14551-6, 2005 Aug 04.
Artículo en Inglés | MEDLINE | ID: mdl-16852834

RESUMEN

The evolution of photochemical surfactant removal and silica condensation from organically templated thin film silica nanocomposites with mesoscopic ordering has been probed using a combined application of Fourier transform infrared (FT-IR) spectroscopy and single wavelength ellipsometry. Thin films of silica nanocomposites were prepared by a previously reported evaporation-induced self-assembly process. Specifically, oxidized silicon and gold substrates were withdrawn at 25 mm/min from a subcritical micelle concentration solution containing an ethylene oxide surfactant as a structure-directing agent and tetraethyl orthosilicate as a silica precursor. Real-time grazing incidence difference FT-IR spectra of the nanocomposite films on gold taken during exposure to short-wavelength ultraviolet light (184-257 nm) show that surfactant removal and silica condensation occur gradually and concomitantly. Surfactant removal and silica reconstructions were found to be nearly complete after 90 min of exposure. Further, a transient feature was observed in the FT-IR spectra around 1713 cm(-1) during the UV exposure process and was assigned to a carbonyl (C=O) stretching mode absorption, reflecting the transient formation of a partially oxidized surfactant intermediate. From these data we propose a stepwise model for surfactant removal from the nanocomposite films. Ellipsometrically determined index of refraction values collected as a function of UV exposure are also shown to support such a stepwise mechanism of surfactant removal from the ordered nanocomposite silica thin film mesophases studied here.


Asunto(s)
Dióxido de Silicio/química , Tensoactivos/química , Carbono/química , Hidrógeno/química , Fotoquímica , Espectroscopía Infrarroja por Transformada de Fourier
17.
Chem Commun (Camb) ; (21): 2490-1, 2004 Nov 07.
Artículo en Inglés | MEDLINE | ID: mdl-15514830

RESUMEN

Poly(2,5-methoxy-propyloxy sulfonate phenylene vinylene)(MPS-PPV) and DAB-Am-16, a generation 3.0 polypropylenimine hexadecamine dendrimer (DAB), are shown to form a tunable photoresponsive polyelectrolyte assembly in aqueous solution with an enhanced emission signal of up to 18-times that of MPS-PPV alone.


Asunto(s)
Electrólitos/química , Mediciones Luminiscentes , Polivinilos/química , Estructura Molecular , Polipropilenos/química , Soluciones/química
18.
Inorg Chem ; 38(26): 6200-6205, 1999 Dec 27.
Artículo en Inglés | MEDLINE | ID: mdl-11671333

RESUMEN

The solvothermal reaction of CuCl and ZrCl(4) in benzene yields ((bz)CuCl(3))(2)Zr (1) (bz = eta(2)-benzene), which has been characterized by single-crystal X-ray diffraction with a = 6.1206(4) Å, b = 11.1242(4) Å, c = 13.6222(6) Å, beta = 93.675(3) degrees in the monoclinic space group P2(1)/m, Z = 2. 1 adopts a one-dimensional chain structure constructed from zirconium chloride octahedra and [(bz)CuCl(3)](2)(-) tetrahedra. The [(bz)CuCl(3)](2)(-) units are shown to be metal halide analogues of the phosphonate unit [RPO(3)](2)(-). Interchain interactions link chains of 1 along the crystallographic c direction via an edge-to-face pi-stacking of the coordinated benzene molecules. The crystal packing forces influence dramatic second-order Jahn-Teller distortions, making each of the two ((bz)CuCl(3))(2)(-) units distinct. These interactions further result in ligand-to-metal and metal-to-ligand charge transfers that cause an activation of the benzene ligands.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA