[Three-dimensional structure of yellow fluorescent protein zYFP538 from Zoanthus sp. at the resolution 1.8 angstrom].

The three-dimensional structure of yellow fluorescent proteins zYFP538 (zFP538) from the button polyp Zoanthus sp. was determined at a resolution of 1.8 angstrom by X-ray analysis. The monomer of zYFP538 adopts a structure characteristic of the green fluorescent protein (GFP) family, a beta-barrel formed from 11 antiparallel beta segments and one internal alpha helix with a chromophore embedded into it. Like the TurboGFP, the beta-barrel of zYFP538 contains a water-filled pore leading to the chromophore Tyr67 residue, which presumably provides access of molecular oxygen necessary for the maturation process. The post-translational modification of the chromophore-forming triad Lys66-Tyr67-Gly68 results in a tricyclic structure consisting of a five-membered imidazolinone ring, a phenol ring of the Tyr67 residue, and an additional six-membered tetrahydropyridine ring. The chromophore formation is completed by cleavage of the protein backbone at the Calpha-N bond of Lys66. It was suggested that the energy conflict between the buried positive charge of the intact Lys66 side chain in the hydrophobic pocket formed by the Ile44, Leu46, Phe65, Leu204 and Leu219 side chains is the most probable trigger that induces the transformation of the bicyclic green form to the tricyclic yellow form. A stereochemical analysis of the contacting surfaces at the intratetramer interfaces helped reveal a group of conserved key residues responsible for the oligomerization. Along with others, these residues should be taken into account in designing monomeric forms suitable for practical application as markers of proteins and cell organelles.

Suggestive evidence for the involvement of the second calcium and surface loop in interfacial binding: monoclinic and trigonal crystal structures of a quadruple mutant of phospholipase A2.

The crystal structures of the monoclinic and trigonal forms of the quadruple mutant K53,56,120,121M of recombinant bovine pancreatic phospholipase A2 (PLA2) have been solved and refined at 1.9 and 1.1 A resolution, respectively. Interestingly, the monoclinic form reveals the presence of the second calcium ion. Furthermore, the surface-loop residues are ordered and the conformation of residues 62-66 is similar to that observed in other structures containing the second calcium ion. On the other hand, in the trigonal form the surface loop is disordered and the second calcium is absent. Docking studies suggest that the second calcium and residues Lys62 and Asp66 from the surface loop could be involved in the interaction with the polar head group of the membrane phospholipid. It is hypothesized that the two structures of the quadruple mutant, monoclinic and trigonal, represent the conformations of PLA2 at the lipid interface and in solution, respectively. A docked structure with a phospholipid molecule and with a transition-state analogue bound, one at the active site coordinating to the catalytic calcium and the other at the second calcium site, but both at the i-face, is presented.

Atomic resolution structure of the double mutant (K53,56M) of bovine pancreatic phospholipase A2.

The structure of the double mutant K53,56M has previously been refined at 1.9 A resolution using room-temperature data. The present paper reports the crystal structure of the same mutant K53,56M refined against 1.1 A data collected using synchrotron radiation. A total of 116 main-chain atoms from 29 residues and 44 side chains are modelled in alternate conformations. Most of the interfacial binding residues are found to be disordered and alternate conformations could be recognized. The second calcium ion-binding site residue Glu92 adopts two alternate conformations. The minor and major conformations of Glu92 correspond to the second calcium ion bound and unbound states.

Structure of Mycobacterium smegmatis single-stranded DNA-binding protein and a comparative study involving homologus SSBs: biological implications of structural plasticity and variability in quaternary association.

The structure of Mycobacterium smegmatis single-stranded DNA-binding protein (SSB) has been determined using three data sets collected from related crystals. The structure is similar to that of its homologue from Mycobacterium tuberculosis, indicating that the clamp arrangement that stabilizes the dimer and the ellipsoidal shape of the tetramer are characteristic features of mycobacterial SSBs. The central OB fold is conserved in mycobacterial SSBs as well as those from Escherichia coli, Deinococcus radiodurans and human mitochondria. However, the quaternary structure exhibits considerable variability. The observed plasticity of the subunit is related to this variability. The crystal structures and modelling provide a rationale for the variability. The strand involved in the clamp mechanism, which leads to higher stability of the tetramer, appears to occur in all high-G+C Gram-positive bacteria. The higher stability is perhaps required by these organisms. The mode of DNA binding of mycobacterial SSBs is different from that of E. coli SSB partly on account of the difference in the shape of the tetramers. Another difference between the two modes is that the former contains additional ionic interactions and is more susceptible to salt concentration.

Atomic resolution (0.97 A) structure of the triple mutant (K53,56,121M) of bovine pancreatic phospholipase A2.

The enzyme phospholipase A2 catalyzes the hydrolysis of the sn-2 acyl chain of phospholipids, forming fatty acids and lysophospholipids. The crystal structure of a triple mutant (K53,56,121M) of bovine pancreatic phospholipase A2 in which the lysine residues at positions 53, 56 and 121 are replaced recombinantly by methionines has been determined at atomic resolution (0.97 A). The crystal is monoclinic (space group P2), with unit-cell parameters a = 36.934, b = 23.863, c = 65.931 A, beta = 101.47 degrees. The structure was solved by molecular replacement and has been refined to a final R factor of 10.6% (Rfree = 13.4%) using 63,926 unique reflections. The final protein model consists of 123 amino-acid residues, two calcium ions, one chloride ion, 243 water molecules and six 2-methyl-2,4-pentanediol molecules. The surface-loop residues 60-70 are ordered and have clear electron density.

Purification, crystallization and preliminary X-ray structure analysis of the banana lectin from Musa paradisiaca.

The banana lectin from Musa paradisiaca, MW 29.4 kDa, has been isolated, purified and crystallized. The trigonal crystals contain one dimeric molecule in the asymmetric unit. The structure has been solved using molecular replacement to a resolution of 3 A. The structure of the subunit is similar to that of jacalin-like lectins.

A redetermination of the structure of the triple mutant (K53,56,120M) of phospholipase A2 at 1.6 A resolution using sulfur-SAS at 1.54 A wavelength.

The crystal structure of the triple mutant K53,56,120M of bovine pancreatic phospholipase A(2) has been redetermined using sulfur single-wavelength anomalous scattering. The synchrotron data were collected at lambda = 1.54 A and the crystal diffracted to 1.6 A resolution. The program SOLVE was used to locate the heavy atoms and to estimate the initial phases and the resulting map was then subjected to RESOLVE. The output of 455 non-H atoms, including 12 S atoms, one calcium ion and one chloride ion, were then subjected to ARP/wARP followed by REFMAC. With the improved phases, the automatic model building successfully built more than 85% of the 123 residues, excluding the N- and C-terminal residues. The final crystallographic R factor is 17.7% (R(free) = 21.7%). The refined model consists of 954 non-H protein atoms, 165 water O atoms, three 2-methyl-2,4-pentanediol (MPD) molecules, one calcium ion and one chloride ion. The present work is yet another example that shows the utility of single-wavelength anomalous scattering data for solving a protein structure.

The crystal structure of a major dust mite allergen Der p 2, and its biological implications.

The crystal structure of the common house mite (Dermatophagoides sp.) Der p 2 allergen was solved at 2.15 A resolution using the MAD phasing technique, and refined to an R-factor of 0.209. The refined atomic model, which reveals an immunoglobulin-like tertiary fold, differs in important ways from the previously described NMR structure, because the two beta-sheets are significantly further apart and create an internal cavity, which is occupied by a hydrophobic ligand. This interaction is structurally reminiscent of the binding of a prenyl group by a regulatory protein, the Rho guanine nucleotide exchange inhibitor. The crystal structure suggests that binding of non-polar molecules may be essential to the physiological function of the Der p 2 protein.

Inhibitor complexes of the Pseudomonas serine-carboxyl proteinase.

Crystal structures of the serine-carboxyl proteinase from Pseudomonas sp. 101 (PSCP), complexed with a number of inhibitors, have been solved and refined at high- to atomic-level resolution. All of these inhibitors (tyrostatin, pseudo-tyrostatin, AcIPF, AcIAF, and chymostatin, as well as previously studied iodotyrostatin and pseudo-iodotyrostatin) make covalent bonds to the active site Ser287 through their aldehyde moieties, while their side chains occupy subsites S1-S4 of the enzyme. The mode of binding of the inhibitors is almost identical for their P1 and P2 side chains, while significant differences are observed for P3 and P4 (if present). Kinetic parameters for the binding of these nanomolar inhibitors to PSCP have been established and correlated with the observed mode of binding. The preferences of this enzyme for a larger side chain in P2 as well as Tyr or Phe in P1 are explained by the size, shape, and characteristics of the S2 and S1 regions of the protein structure, respectively. Networks of hydrogen bonds involving glutamic and aspartic acids have been analyzed for the atomic-resolution structure of the native enzyme. PSCP contains a calcium-binding site that consists of Asp328, Asp348, three amide carbonyl groups, and a water molecule, in almost perfect octahedral coordination. The presence of Ca(2+) cation is necessary for the activity of the enzyme.

Anomalous signal of phosphorus used for phasing DNA oligomer: importance of data redundancy.

The crystal structure of a left-handed Z-DNA hexamer duplex d(CGCGCG)(2) has been solved based on the anomalous diffraction signal of inherent P atoms using data collected at the single wavelength of 1.54 A. The anomalous signal of about 2% of the total diffracted intensity, constant for all nucleic acids, may be generally useful for solving crystal structures of DNA and RNA oligomers. The multiplicity of intensity measurements is shown to crucially affect the data quality and the ability to solve the phase problem. The anisotropic model refined to an R factor of 8.9% at 0.95 A resolution.

Protein crystal structure solution by fast incorporation of negatively and positively charged anomalous scatterers.

The preparation of derivatives by the traditional methods of soaking is one of the most time-consuming steps in protein crystal structure solution by X-ray diffraction techniques. The 'quick cryosoaking' procedure for derivatization with halides (monovalent anions) offers the possibility of significantly speeding up this process [Dauter et al. (2000), Acta Cryst. D56, 232-237]. In the present work, an extension of this technique is proposed and the use of two different classes of compounds (monovalent and polyvalent cations) that can be successfully utilized in the quick cryosoaking procedure for the derivatization and phasing of protein crystals is described. This approach has been tested on hen egg-white lysozyme and has been successfully used to solve the structure of a novel trypsin inhibitor. The possibility of using cations in the fast cryosoaking procedure gives additional flexibility in the process of derivatization and increases the chances of success in phase determination. This method can be applied to high-throughput crystallographic projects.

Carboxyl proteinase from Pseudomonas defines a novel family of subtilisin-like enzymes.

The crystal structure of a pepstatin-insensitive carboxyl proteinase from Pseudomonas sp. 101 (PSCP) has been solved by single-wavelength anomalous diffraction using the absorption peak of bromide anions. Structures of the uninhibited enzyme and of complexes with an inhibitor that was either covalently or noncovalently bound were refined at 1.0-1.4 A resolution. The structure of PSCP comprises a single compact domain with a diameter of approximately 55 A, consisting of a seven-stranded parallel beta-sheet flanked on both sides by a number of helices. The fold of PSCP is a superset of the subtilisin fold, and the covalently bound inhibitor is linked to the enzyme through a serine residue. Thus, the structure of PSCP defines a novel family of serine-carboxyl proteinases (defined as MEROPS S53) with a unique catalytic triad consisting of Glu 80, Asp 84 and Ser 287.

Practical experience with the use of halides for phasing macromolecular structures: a powerful tool for structural genomics.

The crystal structure of pepstatin-insensitive carboxyl proteinase (PCP) from Pseudomonas sp. 101, an enzyme with no overall sequence similarity to any other proteinases of known structure, was solved using crystals soaked in sodium bromide solution and then cryocooled. A data set collected at the bromine peak absorption wavelength was sufficient for calculation of an excellent map and the entire process of phasing and tracing the maps required almost no direct human intervention. The process of structure solution using single-wavelength data was compared with three-wavelength multiwavelength anomalous diffraction (MAD); although the latter resulted in slightly better maps, the use of this much more labor-intensive approach did not significantly improve the ability to solve the structure. The successful phasing approaches are compared with several less successful attempts utilizing other crystal forms of the enzyme and the practical aspects of the use of bromine as a heavy-atom derivative are discussed. In conclusion, the use of halides with single-wavelength diffraction data fulfills the requirements of being a first-choice method of high-throughput structure solution for the emerging field of structural genomics.

Crystal structure of the human acyl protein thioesterase I from a single X-ray data set to 1.5 A.

BACKGROUND: Many proteins undergo posttranslational modifications involving covalent attachment of lipid groups. Among them is palmitoylation, a dynamic, reversible process that affects trimeric G proteins and Ras and constitutes a regulatory mechanism for signal transduction pathways. Recently, an acylhydrolase previously identified as lysophospholipase has been shown to function as an acyl protein thioesterase, which catalyzes depalmitoylation of Galpha proteins as well as Ras. Its amino acid sequence suggested that the protein is evolutionarily related to neutral lipases and other thioesterases, but direct structural information was not available. RESULTS: We have solved the crystal structure of the human putative Galpha-regulatory protein acyl thioesterase (hAPT1) with a single data set collected from a crystal containing the wild-type protein. The phases were calculated to 1.8 A resolution based on anomalous scattering from Br(-) ions introduced in the cryoprotectant solution in which the crystal was soaked for 20 s. The model was refined against data extending to a resolution of 1.5 A to an R factor of 18.6%. The enzyme is a member of the ubiquitous alpha/beta hydrolase family, which includes other acylhydrolases such as the palmitoyl protein thioesterase (PPT1). CONCLUSIONS: The human APT1 is closely related to a previously described carboxylesterase from Pseudomonas fluorescens. The active site contains a catalytic triad of Ser-114, His-203, and Asp-169. Like carboxylesterase, hAPT1 appears to be dimeric, although the mutual disposition of molecules in the two dimers differs. Unlike carboxylesterase, the substrate binding pocket and the active site of hAPT1 are occluded by the dimer interface, suggesting that the enzyme must dissociate upon interaction with substrate.

Structure of the BH domain from graf and its implications for Rho GTPase recognition.

Cellular signaling by small G-proteins is down-regulated by GTPase-activating proteins (GAPs), which increase the rate of GTP hydrolysis. The GTPase regulator associated with focal adhesion kinase (Graf) exhibits GAP activity toward the RhoA and Cdc42 GTPases, but is only weakly active toward the closely related Rac1. We determined the crystal structure of a 231-residue fragment of Graf (GrafGAP), a domain containing the GAP activity, at 2.4-A resolution. The structure clarifies the boundaries of the functional domain and yields insight to the mechanism of substrate recognition. Modeling its interaction with substrate suggested that a favorable interaction with Glu-95 of Cdc42 (Glu-97 of RhoA) would be absent with the corresponding Ala-95 of Rac1. Indeed, GrafGAP activity is diminished approximately 40-fold toward a Cdc42 E95A mutant, whereas a approximately 10-fold increase is observed for a Rac1 A95E mutant. The GrafGAP epitope that apparently interacts with Glu-95(Glu-97) contains Asn-225, which was recently found mutated in some myeloid leukemia patients. We conclude that position 95 of the GTPase is an important determinant for GrafGAP specificity in cellular function and tumor suppression.

Substrate specificity in glycoside hydrolase family 10. Structural and kinetic analysis of the Streptomyces lividans xylanase 10A.

Endoxylanases are a group of enzymes that hydrolyze the beta-1, 4-linked xylose backbone of xylans. They are predominantly found in two discrete sequence families known as glycoside hydrolase families 10 and 11. The Streptomyces lividans xylanase Xyl10A is a family 10 enzyme, the native structure of which has previously been determined by x-ray crystallography at a 2.6 A resolution (Derewenda, U., Swenson, L., Green, R., Wei, Y., Morosoli, R., Shareck, F., Kluepfel, D., and Derewenda, Z. S. (1994) J. Biol. Chem. 269, 20811-20814). Here, we report the native structure of Xyl10A refined at a resolution of 1.2 A, which reveals many features such as the rare occurrence of a discretely disordered disulfide bond between residues Cys-168 and Cys-201. In order to investigate substrate binding and specificity in glycoside hydrolase family 10, the covalent xylobiosyl enzyme and the covalent cellobiosyl enzyme intermediates of Xyl10A were trapped through the use of appropriate 2-fluoroglycosides. The alpha-linked intermediate with the nucleophile, Glu-236, is in a (4)C(1) chair conformation as previously observed in the family 10 enzyme Cex from Cellulomonas fimi (Notenboom, V., Birsan, C., Warren, R. A. J., Withers, S. G., and Rose, D. R. (1998) Biochemistry 37, 4751-4758). The different interactions of Xyl10A with the xylobiosyl and cellobiosyl moieties, notably conformational changes in the -2 and -1 subsites, together with the observed kinetics on a range of aryl glycosides, shed new light on substrate specificity in glycoside hydrolase family 10.

Effects of crystal twinning on the ability to solve a macromolecular structure using multiwavelength anomalous diffraction.

The crystal structure of gpD, the capsid-stabilizing protein of bacteriophage lambda, was solved by multiwavelength anomalous diffraction (MAD) for a selenomethionine (SeMet) derivative of the protein at 1.8 A resolution, using crystals in space group P2(1) [Yang et al. (2000), Nature Struct. Biol. 7, 230-237]. Subsequent analysis showed that the crystals of both the original protein and the SeMet derivative were pseudo-merohedrally twinned with a twinning fraction approximately 0.36, owing to the near-identity of the a and c axes. An analysis of the crystal structure solution is presented and the utility of twinned crystals for solving the structure using MAD and of different phasing strategies is discussed; the results obtained with several software packages are compared.

Structural analysis of a chimeric bacterial alpha-amylase. High-resolution analysis of native and ligand complexes.

Several chimeric alpha-amylases genes were constructed by an in vivo recombination technique from the Bacillus amyloliquefaciens and Bacillus licheniformis genes. One of the fusion amylases (hereafter BA2), consisting of residues 1-300 from B. amyloliquefaciens and 301-483 from B. licheniformis, has been extensively studied by X-ray crystallography at resolutions between 2.2 and 1.7 A. The 3-dimensional structure of the native enzyme was solved by multiple isomorphous replacement, and refined at a resolution of 1.7 A. It consists of 483 amino acids, organized similarly to the known B. lichiniformis alpha-amylase structure [Machius et al. (1995) J. Mol. Biol. 246, 545-559], but features 4 bound calcium ions. Two of these form part of a linear cluster of three ions, the central ion being attributed to sodium. This cluster lies at the junction of the A and B domains with one calcium of the cluster structurally equivalent to the major Ca(2+) binding site of fungal alpha-amylases. The third calcium ion is found at the interface of the A and C domains. BA2 contains a fourth calcium site, not observed in the B. licheniformis alpha-amylase structure. It is found on the C domain where it bridges the two beta-sheets. Three acid residues (Glu261, Asp328, and Asp231) form an active site similar to that seen in other amylases. In the presence of TRIS buffer, a single molecule of TRIS occupies the -1 subsite of the enzyme where it is coordinated by the three active-center carboxylates. Kinetic data reveal that BA2 displays properties intermediate to those of its parents. Data for crystals soaked in maltooligosaccharides reveal the presence of a maltotriose binding site on the N-terminal face of the (beta/alpha)(8) barrel of the molecule, not previously described for any alpha-amylase structure, the biological function of which is unclear. Data for a complex soaked with the tetrasaccharide inhibitor acarbose, at 1.9 A, reveal a decasaccharide moiety, spanning the -7 to +3 subsites of the enzyme. The unambiguous presence of three unsaturated rings in the (2)H(3) half-chair/(2)E envelope conformation, adjacent to three 6-deoxypyranose units, clearly demonstrates synthesis of this acarbose-derived decasaccharide by a two-step transglycosylation mechanism.

Crystal structure of the Escherichia coli thioesterase II, a homolog of the human Nef binding enzyme.

Here we report the solution and refinement at 1.9 A resolution of the crystal structure of the Escherichia coli medium chain length acyl-CoA thioesterase II. This enzyme is a close homolog of the human protein that interacts with the product of the HIV-1 Nef gene, sharing 45% amino acid sequence identity with it. The structure of the E. coli thioesterase II reveals a new tertiary fold, a 'double hot dog', showing an internal repeat with a basic unit that is structurally similar to the recently described beta-hydroxydecanoyl thiol ester dehydrase. The catalytic site, inferred from the crystal structure and verified by site directed mutagenesis, involves novel chemistry and includes Asp 204, Gln 278 and Thr 228, which synergistically activate a nucleophilic water molecule.